[Nagiosplug-help] Slight OT - Fan / Temp monitoring of NT har dware...

[Chris Losch]

It depends on your hardware, and how it reports, 
 
The SNMP plugin on Compaq Servers - with the Management Agents installed -
can do it via SNMP, and I presume with other major hardware manufacturers
can do it also.
 
Get a SIDWalker to check the SNMP information available to you.
 
For Compaq : The OID .1.3.6.1.4.1.232.6.2.x should get you started in the
right place.
 
1.3.6.1.4.1.232.6.2.6.4.0 is a fan status for instance.
 
There is a web page with a lot of information, but i cant remember the name
right now, it appeared in a nagios mailing list previously, so you could do
a search.
 
Chris

-----Original Message-----
From: Michael Kingsbury [mailto:beaker at beakerware.net]
Sent: 09 December 2002 16:55
To: nagiosplug-help at lists.sourceforge.net
Subject: [Nagiosplug-help] Slight OT - Fan / Temp monitoring of NT
hardware...


    Anyone find a decent way of getting MB & CPU temperature & fan status?
I can do it from Linux with sensors, but haven't found a way of getting to
it from NT/2k/XP...
 
-mike



**********************************************************************
Important:
This e-mail is intended for the above named person only and should be
treated as confidential. If this has come to you in error you should take
no action based on it, nor should you copy or show it to anyone; 
please telephone us immediately.
**********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-plugins.org/archive/help/attachments/20021209/dc64b923/attachment.html>