[Nagiosplug-help] check_snmp_int.pl on a cisco 6500

[Andreas Ericsson]

Rossella Mariotti-Jones wrote:
> Thanks for replying so fast. What I'd like to do exactly is to monitor
> (and get and alert) when an interface goes down or comes up.
> 
> I've played a little with the switches and I found that this works:
> 
> [root at ccc-nagios plugins]# ./check_snmp_int.pl -H 10.0.0.X -C string -n
> 
> 1 :DOWN, A :UP, 14:DOWN, CPU:UP, 20:UP, 16:DOWN, 18:DOWN, 12:DOWN,
> 17:DOWN, PortChannel:DOWN, 3 :DOWN, AUI:UP, 2 :DOWN, 19:DOWN, 22:DOWN, 7
> :DOWN, 9 :DOWN, 13:DOWN, 23:DOWN, 6 :DOWN, 4 :DOWN, B :DOWN, 10:UP,
> 15:DOWN, 21:UP, 8 :DOWN, 24:DOWN, 5 :DOWN, 11:UP: 22 int NOK : CRITICAL
> 
> Now, how do I include it into the files and which files? I'm guessing
> probably service.cfg and checkcommands.cfg? Am I on the right track
> considering my goal? Thanks.
> 

Possibly so, but you should most likely send your questions to 
nagios-users at lists.sourceforge.net instead, as this is a configuration 
issue.

> Rossella Mariotti-Jones
> Network Analyst, CCNA
> Chemeketa Community College / IT
> T 503 589 7775
> F 503 399 4898
> E rossella at chemeketa.edu
> www.chemeketa.edu
> 
> -----Original Message-----
> From: Jan Scholten [mailto:Jan.Scholten at iconz.net] 
> Sent: Tuesday, December 07, 2004 1:04 PM
> To: Rossella Mariotti-Jones
> Cc: nagiosplug-help at lists.sourceforge.net
> Subject: Re: [Nagiosplug-help] check_snmp_int.pl on a cisco 6500
> 
> Rossella Mariotti-Jones schrieb:
> 
>>Hello, I'm very new at this and I need some help with snmp check 
>>commands if possible.
>>
>>I'm trying to run the command to see if it works from my command line 
>>like this:
> 
> 
>>[root at ccc-nagios plugins]# ./check_snmp_int.pl -H x.x.x.x -C password
>>And all I get is this:
>>
>>Usage: ./check_snmp_int.pl [-v] -H <host> -C <snmp_community> | (-l 
>>login -w passwd)  [-p <port>] -n <name in desc_oid> [-i] [-a] [-r] 
>>[-f[e]] [-t <timeout>] [-V]
> 
> 
>  From the output you can see that you need to provide a "-n <name in
> desc_oid>" Check the help for 
> more info.
> 
> If you only want to check if a specific interface is up a check like:
> 
> $USER1$/check_snmp -H $HOSTADDRESS$ -C $USER3$ -P 1 -o
> .1.3.6.1.2.1.2.2.1.8.X -w 1:1 -c 1:1
> 
> Replace X with your Port to check (is the numeric oid for
> IF-MIB::ifOperStatus.X) it will return ok 
> if the port is up and critical if the port is down.
> 
> 
> 
>>Can anybody help? Thanks a lot.
> 
> 
> hth
> 
> Jan
> 
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now. 
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help
> ::: Please include plugins version (-v) and OS when reporting any issue. 
> ::: Messages without supporting info will risk being sent to /dev/null
> 

-- 
Andreas Ericsson                   andreas.ericsson at op5.se
OP5 AB                             www.op5.se
Lead Developer