[Nagiosplug-help] check_ntp

[Martinus Nel]

Could some one please help me with the following:

# /usr/lib/nagios/plugins/check_ntp -H 192.168.0.100 -w 60 -c 120 -j 5000 -k
10000 -v
server 192.168.0.100, stratum 4, offset -0.000681, delay 0.02576
ntperr = 0
 1 Nov 12:47:17 ntpdate[11327]: adjust time server 192.168.0.100 offset
-0.000681 sec
ntperr = 0
     remote           refid      st t when poll reach   delay   offset 
jitter
==============================================================================
 192.168.1.1     130.88.203.64    3 u  418 1024  377    0.238   22.639
1013.21
Use of uninitialized value in concatenation (.) or string at
/usr/lib/nagios/plugins/check_ntp line 308.
NTP UNKNOWN: Jitter  too high

Why is giving an error ? And why is it saying jitter too high ?

Martinus.
--
---------------------------------------------------------------------------
DISCLAIMER
This e-mail message and any attachments are confidential and may also be a
privileged communication. It is intended solely for the person(s) to whom
it is addressed. If you are not the intended addressee of the message you
must take no action based on it. Please reply to this message to let us
know you received it in error and also delete the message from your system.
Internet e-mails are not necessarily secure and you should be mindful of
this when e-mailing us.

The contents of an attachment to this e-mail may contain software viruses
which could damage your own computer system. Whilst we have taken every
reasonable precaution to minimise this risk, we cannot accept liability for
any damage which you sustain as a result of software viruses. You should
carry out your own virus checks before opening the attachment.
---------------------------------------------------------------------------