[Nagiosplug-help] Another check_snmp oddity

[Kyle Tucker]

Hi,
	If I use check_snmp to get the load from Net-SNMP's load
directives, all comes back fine until I set -w or -c option. When
I use these options, everything after the decimal point gets cut
off. If I leave off the options, I get the full numeric value.
Thoughts?

# check_snmp -t 3 -P 3 -H 192.168.2.1 -L authPriv -U xxxxxx -a MD5 -A yyyyyy -X zzzzzz -o laLoad.1,laLoad.2,laLoad.3
SNMP OK - 0.32 0.38 0.39 | UCD-SNMP-MIB::laLoad.1=0.32;;;; UCD-SNMP-MIB::laLoad.2=0.38;;;; UCD-SNMP-MIB::laLoad.3=0.39;;;;
# check_snmp -t 3 -P 3 -H 192.168.2.1 -L authPriv -U xxxxxx -a MD5 -A yyyyyy -X zzzzzz -o laLoad.1,laLoad.2,laLoad.3 -w 1,1,1 -c 2,2,2
SNMP OK - 0 0 0 | UCD-SNMP-MIB::laLoad.1=0;;;; UCD-SNMP-MIB::laLoad.2=0;;;; UCD-SNMP-MIB::laLoad.3=0;;;;
# check_snmp -vvv -t 3 -P 3 -H 192.168.2.1 -L authPriv -U xxxxxx -a MD5 -A yyyyyy -X zzzzzz -o laLoad.1,>
/usr/local/bin/snmpget -t 3 -r 5 -m ALL -v 3 -l authPriv -a MD5 -u xxxxxx -A yyyyyy -x DES -X zzzzzz  192.168.2.1:161  laLoad.1 laLoad.2 laLoad.3
UCD-SNMP-MIB::laLoad.1 = STRING: 0.37
UCD-SNMP-MIB::laLoad.2 = STRING: 0.39
UCD-SNMP-MIB::laLoad.3 = STRING: 0.39
SNMP OK - 0 0 0 | UCD-SNMP-MIB::laLoad.1=0;;;; UCD-SNMP-MIB::laLoad.2=0;;;; UCD-SNMP-MIB::laLoad.3=0;;;;

-- 
- Kyle 
---------------------------------------------
kylet at panix.com   http://www.panix.com/~kylet    
---------------------------------------------