[Nagiosplug-help] PROBLEM IN INSTALLATION OF NAGIOS PLUGIN

[VINEET MITTAL]

Thanks AL for your valuble help,

The error got resolved but while processing whole steps of configuration it
leads to another error.

I follow the steps in nrpe document of nagios.

I successfully installed the following things:
1) nagios plugin
2) install xinetd
3) install nrpe daemon

After that i started xinetd service

During testing i run a command

*/usr/local/nagios/libexec/check_nrpe -H localhost

*its give me following error
*
CHECK_NRPE: Error - Could not complete SSL handshake.

*I searched through google but not able to get satisfactory response.

Please help me to come out of this.
Thanks & Regards
Vineet Mittal


On Fri, May 8, 2009 at 1:08 PM, AL Chow (LWHKG-S) <
al.chow at logwin-logistics.com> wrote:

>  I mean you may use the previous version e.g. 1.4.3 or 1.4.5
>
> Because your remote host had not installed the following component:
>
> -          gcc
>
> -          openssl-devel
>
>
>
> Regards,AL
>  ------------------------------
>
> *From:* VINEET MITTAL [mailto:vineetmittal.83 at gmail.com]
> *Sent:* Friday, May 08, 2009 15:07
>
> *To:* Nagios Plugin Help List
> *Subject:* Re: [Nagiosplug-help] PROBLEM IN INSTALLATION OF NAGIOS PLUGIN
>
>
>
> I am already using nagios plugin 1.4.6
>
> On Fri, May 8, 2009 at 9:37 AM, AL Chow (LWHKG-S) <
> al.chow at logwin-logistics.com> wrote:
>
> I had also faced this problem before.
>
> I just download and use another version of Nagios-plugin. E.g. 1.4.3 or
> 1.4.5
>
>
>  ------------------------------
>
> *From:* VINEET MITTAL [mailto:vineetmittal.83 at gmail.com]
> *Sent:* Friday, May 08, 2009 11:37
> *To:* Nagios Plugin Help List
> *Subject:* Re: [Nagiosplug-help] PROBLEM IN INSTALLATION OF NAGIOS PLUGIN
>
>
>
> Hello  Erik,
> I tried it but result is same.
> I continuously got that damm error.
>
> Regards,
> Vineet Mittal
>
> On Wed, May 6, 2009 at 7:18 PM, Erik Wasser <erik.wasser at iquer.net> wrote:
>
> On Wednesday 06 May 2009, VINEET MITTAL wrote:
> > Hello Team,
> >
> > I am using nagios-plugins-1.4.6. During installtion I use the
> > following command to configure:
> >
> > * ./configure --with-ssl=/usr/bin/openssl
> > --with-ssl-lib=/usr/lib/ssl/ *
> >
> > Configuration goes successfully.Then i run  *make* commnad.
> >
> > Its give a following error which is in bold.
> >
>
> > [...]
>
>
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/home/sysadmin/down/nagios-plugins-1.4.6'
>
> > make: *** [all] Error 2*
> >
> >undefined reference to `dlsym'
>
> Have to tried the solution of this link?
>
>
> http://www.linuxquestions.org/questions/linux-server-73/nagios-nrpe-make-all-fails-with-ssl-558277/?s=46627b070c84fb061a6f7c675e934ba6
>
> --
> So long... Fuzz
>
>
>
> ------------------------------------------------------------------------------
> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
> production scanning environment may not be a perfect world - but thanks to
> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK
> i700
> Series Scanner you'll get full speed at 300 dpi even with all image
> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help
> ::: Please include plugins version (-v) and OS when reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
>
>
>
>
> ------------------------------------------------------------------------------
> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
> production scanning environment may not be a perfect world - but thanks to
> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK
> i700
> Series Scanner you'll get full speed at 300 dpi even with all image
> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help
> ::: Please include plugins version (-v) and OS when reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
>
>
>
> ------------------------------------------------------------------------------
> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
> production scanning environment may not be a perfect world - but thanks to
> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK
> i700
> Series Scanner you'll get full speed at 300 dpi even with all image
> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help
> ::: Please include plugins version (-v) and OS when reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-plugins.org/archive/help/attachments/20090508/7dfc1d2d/attachment.html>