[Nagiosplug-help] check_openmanage: unable to blacklist warnings about enclosure firmware

[C. Bensend]

Hey folks,

   So, I had a disk in a Dell 2900 fail yesterday, which was replaced.
Yay.  Unfortunately, the firmware in the disk is newer than the others
in the server, so OMSA is complaining about firmware versions.

   "Fine," I said to myself, preparing to blacklist it.  Unfortunately,
I think I *am* blacklisting all firmware options I have, and it's
still complaining.  :(

   Here is the output of -d:


   System:      PowerEdge T610 II        OMSA version:    6.3.0
   ServiceTag:  -------                  Plugin version:  3.6.8
   BIOS/date:   3.0.0 01/31/2011         Checking mode:   local
-----------------------------------------------------------------------------
   Storage Components
=============================================================================
  STATE  |    ID    |  MESSAGE TEXT
---------+----------+--------------------------------------------------------
      OK |        0 | Controller 0 [PERC 6/i Integrated] is Ready
      OK |  0:0:0:0 | Physical Disk 0:0:0 [SAS-HDD 300GB] on ctrl 0 is Online
      OK |  0:0:0:1 | Physical Disk 0:0:1 [SAS-HDD 300GB] on ctrl 0 is Online
      OK |  0:0:0:2 | Physical Disk 0:0:2 [SATA-HDD 2.0TB] on ctrl 0 is
Online
      OK |  0:0:0:3 | Physical Disk 0:0:3 [SATA-HDD 2.0TB] on ctrl 0 is
Online
      OK |  0:1:0:4 | Physical Disk 1:0:4 [SATA-HDD 2.0TB] on ctrl 0 is
Online
      OK |  0:1:0:5 | Physical Disk 1:0:5 [SATA-HDD 2.0TB] on ctrl 0 is
Online
      OK |  0:1:0:6 | Physical Disk 1:0:6 [SATA-HDD 2.0TB] on ctrl 0 is
Online
      OK |  0:1:0:7 | Physical Disk 1:0:7 [SATA-HDD 2.0TB] on ctrl 0 is
Online
      OK |      0:0 | Logical Drive 'Windows Disk 0' [RAID-1, 278.88 GB]
is Ready
      OK |      0:1 | Logical Drive 'Windows Disk 1' [RAID-6, 7,450.00 GB]
is Ready
      OK |      0:0 | Cache Battery 0 in controller 0 is Ready
      OK |      0:0 | Connector 0 [SAS Port RAID Mode] on controller 0 is
Ready
      OK |      0:1 | Connector 1 [SAS Port RAID Mode] on controller 0 is
Ready
 WARNING |    0:0:0 | Enclosure 0:0:0 [Backplane] on controller 0 is Degraded
 WARNING |    0:1:0 | Enclosure 0:1:0 [Backplane] on controller 0 is Degraded
-----------------------------------------------------------------------------
   Chassis Components
=============================================================================
  STATE  |  ID  |  MESSAGE TEXT
---------+------+------------------------------------------------------------
      OK |    0 | Memory module 0 [DIMM_A1, 2048 MB] is Ok
      OK |    1 | Memory module 1 [DIMM_A2, 2048 MB] is Ok
      OK |    2 | Memory module 2 [DIMM_A3, 2048 MB] is Ok
      OK |    0 | Chassis fan 0 [System Board FAN 3 RPM] reading: 2160 RPM
      OK |    1 | Chassis fan 1 [System Board FAN 4 RPM] reading: 2160 RPM
      OK |    0 | Power Supply 0 [AC]: Presence Detected
      OK |    1 | Power Supply 1 [AC]: Presence Detected
      OK |    0 | Temperature Probe 0 [System Board Ambient Temp] reads 21
C (min=8/3, max=42/47)
      OK |    0 | Processor 0 [Intel Xeon E5506 2.13GHz] is Present
      OK |    0 | Voltage sensor 0 [CPU1 VCORE] is Good
      OK |    1 | Voltage sensor 1 [CPU1 0.75 VTT PG] is Good
      OK |    2 | Voltage sensor 2 [System Board 1.5V PG] is Good
      OK |    3 | Voltage sensor 3 [System Board 1.8V PG] is Good
      OK |    4 | Voltage sensor 4 [System Board 3.3V PG] is Good
      OK |    5 | Voltage sensor 5 [System Board 5V PG] is Good
      OK |    6 | Voltage sensor 6 [CPU1 MEM PG] is Good
      OK |    7 | Voltage sensor 7 [CPU1 VTT PG] is Good
      OK |    8 | Voltage sensor 8 [System Board 0.9V PG] is Good
      OK |    9 | Voltage sensor 9 [CPU1 1.8 PLL PG] is Good
      OK |   10 | Voltage sensor 10 [System Board 8.0V PG] is Good
      OK |   11 | Voltage sensor 11 [System Board 1.1V PG] is Good
      OK |   12 | Voltage sensor 12 [System Board 1.0V LOM PG] is Good
      OK |   13 | Voltage sensor 13 [System Board 1.0V AUX PG] is Good
      OK |   14 | Voltage sensor 14 [System Board 1.05V PG] is Good
      OK |   15 | Voltage sensor 15 [PS 1 Voltage 1] is 120 V
      OK |   16 | Voltage sensor 16 [PS 2 Voltage 2] is 120 V
      OK |    0 | Battery probe 0 [System Board CMOS Battery] is Good
      OK |    2 | Amperage probe 2 [System Board System Level] reads 147 W
      OK |    0 | Chassis intrusion 0 detection: Ok (Chassis is closed)
      OK |    0 | SD Card 0 [SD vFLash Status] is Absent
-----------------------------------------------------------------------------
   Other messages
=============================================================================
  STATE  |  MESSAGE TEXT
---------+-------------------------------------------------------------------
      OK | ESM log health is Ok (less than 80% full)


   Trond, what other output might be helpful?  I guess what I'm looking
for is a way to blacklist the firmware it's complaining about, I kind
of expected to be able to do that.

   The command I'm using via NSClient++ is:

check_openmanage.exe -e -p -b
bat_charge=ALL/ctrl_fw=ALL/ctrl_driver=ALL/ctrl_stdr=ALL --omreport
F:/path/to/omreport.exe


Thanks much!

Benny


-- 
"Open your door, or I open your wall."
                                 -- Seen on an image on fukung.net