option updates, more examples

git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@40 f882894a-f735-0410-b71e-b25c423dba1c

1 files changed, 51 insertions, 14 deletions

diff --git a/command.cfg.in b/command.cfg.in
index 4ccb26c7..adf63062 100644
--- a/command.cfg.in
+++ b/command.cfg.in
@@ -50,12 +50,12 @@ command[host-notify-by-epager]=/bin/echo '$HOSTALIAS$ is $HOSTSTATE$!' | /bin/ma
 command[check_tcp]=@libexecdir@/check_tcp -H $HOSTADDRESS$ -p $ARG1$
 command[check_udp]=@libexecdir@/check_udp -H $HOSTADDRESS$ -p $ARG1$
 command[check_ftp]=@libexecdir@/check_ftp -H $HOSTADDRESS$
-command[check_pop]=@libexecdir@/check_pop $HOSTADDRESS$
-command[check_smtp]=@libexecdir@/check_smtp $HOSTADDRESS$
-command[check_nntp]=@libexecdir@/check_nntp $HOSTADDRESS$
+command[check_pop]=@libexecdir@/check_pop -H $HOSTADDRESS$
+command[check_smtp]=@libexecdir@/check_smtp -H $HOSTADDRESS$
+command[check_nntp]=@libexecdir@/check_nntp -H $HOSTADDRESS$
 command[check_telnet]=@libexecdir@/check_tcp -H $HOSTADDRESS$ -p 23
-command[check_users]=@libexecdir@/check_users $ARG1$ $ARG2$
-command[check_hpjd]=@libexecdir@/check_hpjd $HOSTADDRESS$ public
+command[check_users]=@libexecdir@/check_users -w $ARG1$ -c $ARG2$
+command[check_hpjd]=@libexecdir@/check_hpjd -H $HOSTADDRESS$ -C public
 command[check_mrtg]=@libexecdir@/check_mrtg $ARG1$ 10 AVG $ARG2$ $ARG3$ $ARG4$ $ARG5$ $ARG6$
 command[traffic_average]=@libexecdir@/check_mrtgtraf $ARG1$ 10 AVG $ARG2$ $ARG3$ $ARG4$ $ARG5$
 command[check_load]=@libexecdir@/check_load $ARG1$ $ARG2$ $ARG3$ $ARG4$ $ARG5$ $ARG6$
@@ -92,7 +92,7 @@ command[snmp_swap]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.
 
 #
 # Slightly more generic SNMP OIDs
-#
+# note: using partial textual OIDs here - use numeric oids if you don't have MIBDIRS defined per Net-SNMP (net-snmp.org)
 
 command[snmp_procs]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o host.hrSystem.hrSystemProcesses -w :$ARG2$ -c :$ARG3$ -l processes
 
@@ -112,6 +112,43 @@ command[snmp_tcpopen]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o tcp.
 
 command[snmp_tcpstats]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C $ARG1$ -o tcp.tcpActiveOpens.0,tcp.tcpPassiveOpens.0,tcp.tcpInSegs.0,tcp.tcpOutSegs.0,tcp.tcpRetransSegs.0 -l 'TCP stats'
 
+
+# Some snmp based network device checks (requires Net::SNMP perl module)
+
+# check all admin-up interfaces
+command[check_ifstatus]=@libexecdir@/check_ifstatus -H $HOSTADDRESS$ -C public 
+
+# check particular interface by snmp ifIndex key
+command[check_ifoperstatus]=@libexecdir@/check_ifoperstatus -H $HOSTADDRESS$ -C public -k $ARG1$
+
+# check particular interface by snmp ifDescr value (verify uniqueness before using)
+command[check_ifoperstatus]=@libexecdir@/check_ifoperstatus -H $HOSTADDRESS$ -C public -d $ARG1$
+
+# verify all you BGP session on a device are running (only returns warning due to some hardcoded option - to be fixed soon)
+command[check_snmp_bgpstate]=@libexecdir@/check_bgpstate -H $HOSTADDRESS$ -C public
+
+#
+# SNMP NetApp checks (Jason Truong)
+# 
+#
+#command[check_netapp_uptime]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.2.1.1.3.0 --delimiter=')' -l "Uptime is"
+#
+#command[check_netapp_cpuload]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.789.1.2.1.3.0 -w 90 -c 95 -u '%' -l "CPU LOAD " 
+#
+#command[check_netapp_numdisks]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.789.1.6.4.1.0,.1.3.6.1.4.1.789.1.6.4.2.0,.1.3.6.1.4.1.789.1.6.4.8.0,.1.3.6.1.4.1.789.1.6.4.7.0 -u 'Total Disks','Active','Spare','Failed' -l ""
+#
+
+#
+# SNMP Compaq Insight Agent (oids courtesy of vol)
+# 
+# the following 4 return the following codes: other=1, ok=2, degraded=3, failed=4
+#
+#command[check_compaq_thermalCondition]=@libexec@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.232.6.2.1.0,.1.3.6.1.4.1.232.6.2.2.0,.1.3.6.1.4.1.232.6.2.3.0,.1.3.6.1.4.1.232.6.2.4.0 -u 'ThermalCondition','ThermalTemp','ThermalSystem','ThermalCPUFan' -w 2:2,2:2,2:2,2:2 -c 1:2,1:2,1:2,1:2 -l "Thermal status "
+#
+#
+
+
+
 # This command checks to see if a host is "alive" by pinging it.  The
 # check must result in a 100% packet loss or 5 second (5000ms) round
 # trip average to produce an error.
@@ -135,12 +172,12 @@ command[check-fast-alive]=@libexecdir@/check_fping -H $HOSTADDRESS$
 command[check-imap]=@libexecdir@/check_imap $HOSTADDRESS$
 
 # Check RPC services
-command[check-rpc]=@libexecdir@/check_rpc -H $HOSTADDRESS$ $ARG1$
+command[check-rpc]=@libexecdir@/check_rpc -H $HOSTADDRESS$ -C $ARG1$
 
-# Check if the NFS server is running
-command[check-nfs]=@libexecdir@/check_rpc -H $HOSTADDRESS$ nfs
+# Check if the NFS server is running (version 2 and version 3)
+command[check-nfs]=@libexecdir@/check_rpc -H $HOSTADDRESS$ -C nfs -c2,3
 
-# Check game servers
+# Check game servers/bin/ps -axo 'stat uid ppid comm args'
 command[check_quake]=@libexecdir@/check_game qs $HOSTADDRESS$
 command[check_unreal]=@libexecdir@/check_game uns $HOSTADDRESS$ -p $ARG1$ -pf 8
 
@@ -162,12 +199,12 @@ command[check_nmap_opt_range]=@libexecdir@/check_nmap -H $HOSTADDRESS$ -t 60 -p
 command[check_radius]=@libexecdir@/check_radius $ARG1$ $ARG2$ $HOSTADDRESS$ 1812 $ARG3$
 
 
-# Check Reply
-# This is a command for checking squid proxy servers which uses check
-# reply to ensure an HTTP 200 comes back ..... i.e. squid actually
+# Check HTTP proxy
+# This is a command for checking squid or other proxy servers which uses check
+# http to ensure an HTTP 200 comes back ..... i.e. squid actually
 # serves the page and not an error message.
 
-command[check_squid]=@libexecdir@/check_reply $HOSTADDRESS$ -p $ARG1$  -s 'GET $ARG2$ HTTP/1.0\n\n' -e 'HTTP/1.0 200 OK'
+command[check_squid]=@libexecdir@/check_http -H $HOSTADDRESS$ -p $ARG1$  -u $ARG2$  -e 'HTTP/1.0 200 OK'
 
 
 ## Check RealAudio url