Initial revision

git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2 f882894a-f735-0410-b71e-b25c423dba1c

1 files changed, 268 insertions, 0 deletions

diff --git a/contrib/check_email_loop.pl b/contrib/check_email_loop.pl
new file mode 100644
index 0000000..733406d
--- /dev/null
+++ b/contrib/check_email_loop.pl
@@ -0,0 +1,268 @@
+#!/usr/bin/perl 
+#
+# (c)2000 Benjamin Schmid, blueshift@gmx.net (emergency use only ;-)
+# Copyleft by GNU GPL
+#
+#
+# check_email_loop Nagios Plugin
+#
+# This script sends a mail with a specific id in the subject via
+# an given smtp-server to a given email-adress. When the script
+# is run again, it checks for this Email (with its unique id) on
+# a given pop3 account and send another mail.
+# 
+#
+# Example: check_email_loop.pl -poph=mypop -popu=user -pa=password
+#          -smtph=mailer -from=returnadress@yoursite.com
+#          -to=remaileradress@friend.com -pendc=2 -lostc=0
+#
+# This example will send eacht time this check is executed a new
+# mail to remaileradress@friend.com using the SMTP-Host mailer.
+# Then it looks for any back-forwarded mails in the POP3 host
+# mypop. In this Configuration CRITICAL state will be reached if  
+# more than 2 Mails are pending (meaning that they did not came 
+# back till now) or if a mails got lost (meaning a mail, that was
+# send later came back prior to another mail).
+# 
+
+use Net::POP3;
+use Net::SMTP;
+use strict;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+# ----------------------------------------
+
+my $TIMEOUT = 120;
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my $state = "UNKNOWN";
+my ($sender,$receiver, $pophost, $popuser, $poppasswd, $smtphost);
+my ($poptimeout,$smtptimeout,$pinginterval)=(60,60,5);
+my ($lostwarn, $lostcrit,$pendwarn, $pendcrit);
+
+# Internal Vars
+my ($pop,$msgcount,@msglines,$statinfo,@messageids,$newestid);
+my ($matchcount,$statfile) = (0,"check_email_loop.stat");
+
+# Subs declaration
+sub usage;
+sub messagematchs;
+sub nsexit;
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: $0 Time-Out $TIMEOUT s \n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+# Evaluate Command Line Parameters
+my $status = GetOptions(
+                        "from=s",\$sender,
+                        "to=s",\$receiver,
+                        "pophost=s",\$pophost,
+                        "popuser=s",\$popuser,
+                        "passwd=s",\$poppasswd,
+                        "poptimeout=i",\$poptimeout,
+                        "smtphost=s",\$smtphost,
+                        "smtptimeout=i",\$smtptimeout,
+                        "statfile=s",\$statfile,
+                        "interval=i",\$pinginterval,
+                        "lostwarr=i",\$lostwarn,
+                        "lostcrit=i",\$lostcrit,
+                        "pendwarn=i",\$pendwarn,
+                        "pendcrit=i",\$pendcrit,
+                        );
+usage() if ($status == 0 || ! ($pophost && $popuser && $poppasswd &&
+        $smtphost && $receiver && $sender ));
+
+# Try to read the ids of the last send emails out of statfile
+if (open STATF, "$statfile") {
+  @messageids = <STATF>;
+  chomp @messageids;
+  close STATF;
+}
+
+# Try to open statfile for writing 
+if (!open STATF, ">$statfile") {
+  nsexit("Failed to open mail-ID database $statfile for writing",'CRITICAL');
+}
+
+# Ok - check if it's time to release another mail
+
+# ...
+
+# creating new serial id
+my $serial = time();
+$serial = "ID#" . $serial . "#$$";
+
+# sending new ping email
+my $smtp = Net::SMTP->new($smtphost,Timeout=>$smtptimeout) 
+  || nsexit("SMTP connect timeout ($smtptimeout s)",'CRITICAL');
+($smtp->mail($sender) &&
+ $smtp->to($receiver) &&
+ $smtp->data() &&
+ $smtp->datasend("To: $receiver\nSubject: E-Mail Ping [$serial]\n\n".
+                 "This is a automatically sended E-Mail.\n".
+                 "It ist not intended for human reader.\n\n".
+                 "Serial No: $serial\n") &&
+ $smtp->dataend() &&
+ $smtp->quit
+ ) || nsexit("Error delivering message",'CRITICAL');
+
+# no the interessting part: let's if they are receiving ;-)
+
+$pop = Net::POP3->new( $pophost, 
+                 Timeout=>$poptimeout) 
+       || nsexit("POP3 connect timeout (>$poptimeout s, host: $pophost)",'CRITICAL');
+
+$msgcount=$pop->login($popuser,$poppasswd);
+
+$statinfo="$msgcount mails on POP3";
+
+nsexit("POP3 login failed (user:$popuser)",'CRITICAL') if (!defined($msgcount));
+
+# Count messages, that we are looking 4:
+while ($msgcount > 0) {
+  @msglines = @{$pop->get($msgcount)};
+
+  for (my $i=0; $i < scalar @messageids; $i++) {
+    if (messagematchsid(\@msglines,$messageids[$i])) { 
+      $matchcount++;
+      # newest received mail than the others, ok remeber id.
+      $newestid = $messageids[$i] if ($messageids[$i] > $newestid || !defined $newestid);
+      $pop->delete($msgcount);  # remove E-Mail from POP3 server
+      splice @messageids, $i, 1;# remove id from List
+      last;                     # stop looking in list
+    }
+  } 
+
+  $msgcount--;
+}
+
+$pop->quit();  # necessary for pop3 deletion!
+
+# traverse through the message list and mark the lost mails
+# that mean mails that are older than the last received mail.
+if (defined $newestid) {
+  $newestid =~ /\#(\d+)\#/;
+  $newestid = $1;
+  for (my $i=0; $i < scalar @messageids; $i++) {
+    $messageids[$i] =~ /\#(\d+)\#/;
+    my $akid = $1;
+    if ($akid < $newestid) {
+      $messageids[$i] =~ s/^ID/LI/; # mark lost
+    }
+  }
+}
+
+# Write list to id-Database
+foreach my $id (@messageids) {
+  print STATF  "$id\n";
+}
+print STATF "$serial\n";     # remember send mail of this session
+close STATF;
+
+# ok - count lost and pending mails;
+my @tmp = grep /^ID/, @messageids;
+my $pendingm = scalar @tmp;
+@tmp = grep /^LI/, @messageids;
+my $lostm = scalar @tmp; 
+
+# Evaluate the Warnin/Crit-Levels
+if (defined $pendwarn && $pendingm > $pendwarn) { $state = 'WARNING'; }
+if (defined $lostwarn && $lostm > $lostwarn) { $state = 'WARNING'; }
+if (defined $pendcrit && $pendingm > $pendcrit) { $state = 'CRITICAL'; }
+if (defined $lostcrit && $lostm > $lostcrit) { $state = 'CRITICAL'; }
+
+if ((defined $pendwarn || defined $pendcrit || defined $lostwarn 
+     || defined $lostcrit) && ($state eq 'UNKNOWN')) {$state='OK';}
+
+
+# Append Status info
+$statinfo = $statinfo . ", $matchcount mail(s) came back,".
+            " $pendingm pending, $lostm lost.";
+
+# Exit in a Nagios-compliant way
+nsexit($statinfo);
+
+# ----------------------------------------------------------------------
+
+sub usage {
+  print "check_email_loop 1.0 Nagios Plugin - Real check of a E-Mail system\n";
+  print "=" x 75,"\nERROR: Missing or wrong arguments!\n","=" x 75,"\n";
+  print "This script sends a mail with a specific id in the subject via an given\n";
+  print "smtp-server to a given email-adress. When the script is run again, it checks\n";
+  print "for this Email (with its unique id) on a given pop3 account and sends \n";
+  print "another mail.\n";
+  print "\nThe following options are available:\n";
+  print "   -from=text         email adress of send (for mail returnr on errors)\n";
+  print "   -to=text           email adress to which the mails should send to\n";
+  print "   -pophost=text      IP or name of the POP3-host to be checked\n";
+  print "   -popuser=text      Username of the POP3-account\n";
+  print "   -passwd=text       Password for the POP3-user\n";
+  print "   -poptimeout=num    Timeout in seconds for the POP3-server\n";
+  print "   -smtphost=text     IP oder name of the SMTP host\n";
+  print "   -smtptimeout=num   Timeout in seconds for the SMTP-server\n";
+  print "   -statfile=text     File to save ids of messages ($statfile)\n";
+#  print "   -interval=num      Time (in minutes) that must pass by before sending\n"
+#  print "                      another Ping-mail (gibe a new try);\n"; 
+  print "   -lostwarn=num      WARNING-state if more than num lost emails\n";
+  print "   -lostcrit=num      CRITICAL \n";
+  print "   -pendwarn=num      WARNING-state if more than num pending emails\n";
+  print "   -pendcrit=num      CRITICAL \n";
+  print " Options may abbreviated!\n";
+  print " LOST mails are mails, being sent before the last mail arrived back.\n";
+  print " PENDING mails are those, which are not. (supposed to be on the way)\n";
+  print "\nExample: \n";
+  print " $0 -poph=host -pa=pw -popu=popts -smtph=host -from=root\@me.com\n ";
+  print "      -to=remailer\@testxy.com -lostc=0 -pendc=2\n";
+  print "\nCopyleft 19.10.2000, Benjamin Schmid\n";
+  print "This script comes with ABSOLUTELY NO WARRANTY\n";
+  print "This programm is licensed under the terms of the ";
+  print "GNU General Public License\n\n";
+  exit $ERRORS{"UNKNOWN"};
+}
+
+# ---------------------------------------------------------------------
+
+sub nsexit {
+  my ($msg,$code) = @_;
+  $code=$state if (!defined $code);
+  print "$code: $msg\n" if (defined $msg);
+  exit $ERRORS{$code};
+}
+
+# ---------------------------------------------------------------------
+
+sub messagematchsid {
+  my ($mailref,$id) = (@_);
+  my (@tmp);
+  my $match = 0;
+ 
+  # ID
+  $id =~ s/^LI/ID/;    # evtl. remove lost mail mark
+  @tmp = grep /Subject: E-Mail Ping \[/, @$mailref;
+  chomp @tmp;
+  if (($tmp[0] =~ /$id/)) 
+    { $match = 1; }
+
+  # Sender:
+#  @tmp = grep /^From:\s+/, @$mailref;
+#  if (@tmp && $sender ne "") 
+#    { $match = $match && ($tmp[0]=~/$sender/); }
+
+  # Receiver:
+#  @tmp = grep /^To: /, @$mailref;
+#  if (@tmp && $receiver ne "") 
+#    { $match = $match && ($tmp[0]=~/$receiver/); }
+
+  return $match;
+}
+
+# ---------------------------------------------------------------------