Initial revision

git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2 f882894a-f735-0410-b71e-b25c423dba1c

57 files changed, 7352 insertions, 0 deletions

diff --git a/contrib/aix/check_crit_dsk b/contrib/aix/check_crit_dsk
new file mode 100644
index 00000000..566e07c1
--- /dev/null
+++ b/contrib/aix/check_crit_dsk
@@ -0,0 +1,66 @@
+#!/bin/sh
+
+#=========================================================================
+#  Critical Disk Checker utility
+#
+#  This is the same as the disk checker utility but we use it as
+#  a seperate service in Nagios to report on partitions that
+#  have reached 100% capacity.
+#
+#  We have excluded /dev/cd0 because the cdrom drive will always
+#  report 100% capacity if a CD is in the drive.
+#
+#    Authors:  TheRocker
+#              SpEnTBoY
+#
+#    Email:    therocker@pawprints.2y.net
+#              lonny@abyss.za.org
+#
+#=======================================================================
+
+NUMBER=`rsh $1 -l root df -kP | grep -vE ":|/dev/cd0" | grep -E "100%" | tr -s ' '| cut -d' ' -f5 | cut -c1-3 | line`
+TMPFILE=/tmp/tmpcrit.hndl
+TMPTOO=/tmp/twocrit.hndl
+
+if [ "$NUMBER" -eq 100 ]
+then
+
+ `rsh $1 -l root df -kP |grep -vE ":|/dev/cd0" | grep -E "100%" | tr -s ' '| cut -d' ' -f6,5 >> $TMPFILE`
+
+     LINES=`wc -l /tmp/tmpcrit.hndl | cut -c8`
+     LINESCTL=`wc -l /tmp/tmpcrit.hndl | cut -c8 `
+     echo "Filesystems over 99% --> \c" 
+
+#===============================================================
+#  Just a little bit to check for multiple occurances of the
+#  condition.
+#===============================================================
+
+     while [ $LINESCTL != 0 ]
+      do
+
+       cat $TMPFILE | tail -$LINESCTL > $TMPTOO
+       cat $TMPTOO > $TMPFILE
+       LINESCTL=$(( $LINESCTL -1 ))
+       LINES=$(( $LINES -1 ))
+       DATA=`head -1 /tmp/tmpcrit.hndl`
+       echo "( $DATA ) \c"
+       
+     
+     done
+     echo "\n"
+
+#===============================================================
+#  File clean up.  Always pick up after yourself.  Disk space 
+#  doesn't grow on trees you know.
+#===============================================================
+
+     rm -f $TMPFILE
+     rm -f $TMPTOO
+     exit 2 
+
+else
+
+    echo "No Filesystems over 99%... OK"
+    exit 0
+fi
diff --git a/contrib/aix/check_dsk b/contrib/aix/check_dsk
new file mode 100644
index 00000000..c8ddb3f8
--- /dev/null
+++ b/contrib/aix/check_dsk
@@ -0,0 +1,62 @@
+#! /bin/sh
+
+#======================================================================
+#  Disk Checker utility
+#
+#  Simple little script that checks the status of all partitions
+#  on a node's hard disks.  It will produce a warning alert and list
+#  the offending filesystems in nagios.
+#
+#    Authors:  SpEnTBoY
+#              TheRocker
+#
+#    Email:    lonny@abyss.za.org
+#              therocker@pawprints.2y.net
+#=====================================================================
+
+NUMBER=`rsh $1 -l root df -kP | grep -v ":" | grep -E "9[0-9]%" | tr -s ' '| cut -d' ' -f5 | cut -c1-2 | line`
+TMPFILE=/tmp/tmp.hndl
+TMPTOO=/tmp/two.hndl
+
+if [ "$NUMBER" -gt 90 ]
+then
+
+ `rsh $1 -l root df -kP |grep -v ":" | grep -E "9[0-9]%" | tr -s ' '| cut -d' ' -f6,5 >> $TMPFILE`
+
+     LINES=`wc -l /tmp/tmp.hndl | cut -c8`
+     LINESCTL=`wc -l /tmp/tmp.hndl | cut -c8 `
+     echo "Filesystems over 90% --> \c" 
+
+#======================================================================
+#  You'll see this one in a few our shell scripts.  Just chcecking for
+#  multiple occurances of the warnign condition.  We gotta list 'em all
+#======================================================================
+
+     while [ $LINESCTL != 0 ]
+      do
+
+       cat $TMPFILE | tail -$LINESCTL > $TMPTOO
+       cat $TMPTOO > $TMPFILE
+       LINESCTL=$(( $LINESCTL -1 ))
+       LINES=$(( $LINES -1 ))
+       DATA=`head -1 /tmp/tmp.hndl`
+       echo "( $DATA ) \c"
+       
+     
+     done
+     echo "\n"
+
+#===============================================================
+#  Clean up all those nasty tmp files that suck up valuable
+#  disk realestate.
+#===============================================================
+
+     rm -f $TMPFILE
+     rm -f $TMPTOO
+     exit 1
+
+else
+
+    echo "No Filesystems over 90%... OK"
+    exit 0
+fi
diff --git a/contrib/aix/check_failed b/contrib/aix/check_failed
new file mode 100644
index 00000000..50cdf7e1
--- /dev/null
+++ b/contrib/aix/check_failed
@@ -0,0 +1,48 @@
+#!/usr/bin/perl
+#======================
+# Created May 25, 2000
+#======================
+
+# This scripts is for checking for failed root login attempts on
+# any machine running AIX which has a failedlogin file in /etc/security
+# The purpose is to thwart (good word) any unauthorised people from
+# even trying to log in as root. This plugin has been developed for Nagios
+# running on AIX.  
+# Lonny Selinger SpEnTBoY lonny@abyss.za.org
+# May
+
+
+my $server = $ARGV[0];
+
+if (!$ARGV[0]) {
+        print "You must specify a server to check\n";
+        print "usage: ./check_failed <Server Name>\n";
+        exit (-1);
+        } else {
+                open (DATE, "/bin/date '+%b %d' |");
+                while (<DATE>) {
+                        $dline = $_;
+                        @dresults = $dline;
+                        chop $dresults[0];
+                }       
+                open (SULOG, "rsh $server -l root who /etc/security/failedlogin | grep root |");
+                while (<SULOG>) {
+                        $line = $_;
+                        @results = split (/\s+/,$line);
+                        if ($line =~ /^root/) {
+                        if (join(' ', @results[2,3]) eq $dresults[0]) { 
+                                print "FAILED root login on $dresults[0], node: $ARGV[0] from $results[5]\n";
+                                exit(2);
+                        }
+                }
+        }
+}       
+if (join(' ', @results[2,3]) ne $dresults[0]) {
+        print "No Failed Root Logins on This Node\n";
+        exit(0);
+}
+exit(0);
+close(SULOG);
+close(DATE);
+
+
diff --git a/contrib/aix/check_io b/contrib/aix/check_io
new file mode 100644
index 00000000..58b25f6d
--- /dev/null
+++ b/contrib/aix/check_io
@@ -0,0 +1,69 @@
+#! /bin/sh
+
+#=================================================================
+#
+#  I/O Checker (KBPS)
+#  This Script uses iostat to monitor disk io
+#  Useful for notifications of disk thrashing.
+#
+#    Authors:  TheRocker
+#              SpEnTBoY
+#
+#    Email:    therocker@pawprints.2y.net
+#              lonny@abyss.za.org
+#
+#================================================================
+
+NUMBER1=`rsh $1 -l root iostat -d | grep -e "hdisk" | tr -s ' ' | cut -d' ' -f2 | sort -2 -r | cut -c1 | line`
+NUMBER2=`rsh $1 -l root iostat -d | grep -e "hdisk" | tr -s ' ' | cut -d' ' -f2 | sort -2 -r | cut -c2 | line`
+TMPFILE=/tmp/iotest.hndl
+TMPTOO=/tmp/iotwo.hndl
+
+#===========================================================
+#
+#  We do an evaluation on $NUMBER1 and $NUMBER2 to see if
+#  disk io is exceeding 40%.
+#
+#===========================================================
+
+if [ "$NUMBER1" -gt 4 ] && [ "$NUMBER2" -gt 0 ]
+then
+
+ `rsh $1 -l root iostat -d | grep -v cd0 | tr -s ' '| cut -d' ' -f1,2 | grep -e "4[0-9]." >> $TMPFILE`
+
+#====================================================================
+#
+#  Of course, there may be more than one hard disk on the node
+#  so we use this bit of code to report on more than one instance
+#  of excessive disk IO.
+#
+#====================================================================
+
+     LINES=`wc -l /tmp/iotest.hndl | cut -c8`
+     LINESCTL=`wc -l /tmp/iotest.hndl | cut -c8 `
+     echo "WARNING!!! Disk I/O Exceeding 40% on --> \c" 
+     
+     while [ $LINESCTL != 0 ]
+      do
+
+       cat $TMPFILE | tail -$LINESCTL > $TMPTOO
+       cat $TMPTOO > $TMPFILE
+       LINESCTL=$(( $LINESCTL -1 ))
+       LINES=$(( $LINES -1 ))
+       DATA=`head -1 /tmp/iotest.hndl`
+       echo "( $DATA ) "
+       
+     
+     done
+     echo "\n"
+
+     rm -f $TMPFILE
+     rm -f $TMPTOO
+     exit 1 
+
+else   
+
+   print "No Disk I/O Exceeding 40%...OK"
+   exit 0
+
+fi
diff --git a/contrib/aix/check_kerberos b/contrib/aix/check_kerberos
new file mode 100644
index 00000000..443ab109
--- /dev/null
+++ b/contrib/aix/check_kerberos
@@ -0,0 +1,49 @@
+#! /bin/sh
+
+#=========================================================================
+#  Kerberos Ticket Checker
+#
+#  This script is handy if you allow kerberos tickets to expire
+#  on your nodes.  The script will simply warn you when a node has 
+#  kerberos tickets expiring on the current date.  This will allow to
+#  re-initialize the tickets if you wish to do so.
+#
+#  Nothing fancy here, all Nagios will show is the number of tickets
+#  that are going to (or already have) expired.  
+#
+#    An item of note:
+#
+#      We made no provisions for the weekend.  If tickets expire on the 
+#      weekend and nobody is around, you won't see a warning on the 
+#      Nagios console because we look for expired on the current day
+#      only.  It's a good idea to have this warning emailed to the 
+#      appropriate admin and if there is something critical that relies
+#      on Kerberos, you might want to send a page.
+#
+#    Authors:  TheRocker
+#              SpEnTBoY
+#
+#    Email:    therocker@pawprints.2y.net
+#              lonny@abyss.za.org
+#=========================================================================
+
+TMPFILE=/tmp/kerbtmp.hndl
+DATE=`date +%b' '%d`
+
+rsh $1 -l root /usr/lpp/ssp/kerberos/bin/klist | tr -s ' ' | cut -d' ' -f4,5,6 | grep -e "$DATE" > $TMPFILE
+
+
+if [ -s $TMPFILE ]
+then
+     
+     LINES=`wc -l /tmp/kerbtmp.hndl | cut -c7-8`
+     echo "Kerberos Tickets set to expire --> \c" 
+     echo "$LINES \c"
+     echo "\n"
+
+    rm -f $TMPFILE
+     exit 1
+
+fi
+    echo "Kerberos Tickets are valid"
+    exit 0
diff --git a/contrib/aix/check_ping b/contrib/aix/check_ping
new file mode 100644
index 00000000..aaa8c84e
--- /dev/null
+++ b/contrib/aix/check_ping
@@ -0,0 +1,117 @@
+#!/usr/bin/perl -w
+
+#================================================================
+#
+# This perl script will accept an argument and simply pass it
+# to ping.  It works by sending 2 ping to the specified host
+# and evaluating on the average delta time of those 2 pings.
+#
+#    Author: SpEnTBoY 
+#    Email: lonny@abyss.za.org
+#    April 5,2000
+#
+#================================================================
+
+#============================
+# State predefined stuff and
+#       requirements
+#============================
+
+require 5.004;
+use POSIX;
+use strict;
+
+sub usage;
+
+my $ipaddr = $ARGV[0];
+
+my $TIMEOUT = 15;
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my $remote = shift || &usage(%ERRORS);
+my $warning = shift || 750;
+my $critical = shift || 1000;
+
+my $state = "OK";
+my $answer = undef;
+my $offset = undef;
+my $line = undef;
+
+#============================================================
+# If theres no response we can exit the bloody thing cleanly
+# last thing I want to do is hang an AIX system ;-)
+#============================================================
+
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No response from PING! (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+#================================================
+# Pass stddn from $ARGV to the command and parse
+# the info we need (namely the value for "max"
+#================================================
+
+
+
+open(PING,"/usr/sbin/ping -c 2 '$ipaddr' >&1|");
+while (<PING>) {
+        $line = $_;
+        if (/round-trip min\/avg\/max = (.+)\/(.+)\/(.+) ms/) {
+        $offset = $3;
+        last;
+    }
+}
+
+#==================================================
+# Do some error checking on the output of the file
+# and implement values for <crit> and <warn> 
+# deffinitions if they were specified by the user
+# or sub in the predefined ones
+#==================================================
+
+if (defined $offset) {
+    if (abs($offset) > $warning) {
+        if (abs($offset) > $critical) {
+            $state = "CRITICAL";
+            $answer = ": Ping Time $offset MS greater than +/- $critical MS\n";
+        } else {
+            $state = "WARNING";
+            $answer = ": Ping Time $offset MS greater than +/- $warning MS\n";
+        }
+    } else {
+        $state = "OK";
+        $answer = ": Ping Time $offset MS\n";
+    }
+} else {
+    $state = "UNKNOWN";
+    $answer = ": $line\n";
+}
+print ("$state$answer");
+exit $ERRORS{$state};
+
+sub usage {
+        print "\n";
+        print "#=========================================\n";
+        print "Check_Ping 0.02 script by Lonny Selinger\n";
+        print "Made with AIX in mind ;-)\n";
+        print "#=========================================\n";
+        print "\n";
+        print "#================================================\n";
+        print " I'm going to need a few more arguments from you\n";
+        print "#================================================\n";
+        print "\n";
+        print "#================================================\n";
+        print "Usage: check_ping <host> [<warn> [<crit>]\n";
+        print "#================================================\n";
+        print "\n";
+        print "<warn> = Ping in MS at which a warning message will be generated.\n      Defaults to 750.\n";
+        print "<crit> = Ping in MS at which a critical message will be generated.\n     Defaults to 1000.\n\n";
+        exit $ERRORS{"UNKNOWN"};
+}
+
diff --git a/contrib/aix/check_queue b/contrib/aix/check_queue
new file mode 100644
index 00000000..9f709c54
--- /dev/null
+++ b/contrib/aix/check_queue
@@ -0,0 +1,67 @@
+#! /bin/sh
+
+#===============================================================
+#  Print Queue Checker
+#
+#  The print queue checker simply looks for an occurance of a 
+#  DOWN queue.  A note of warning, if you use remote queues in
+#  AIX to redirect print jobs from the AIX queue to an NT print
+#  server that print through DLC rather than IP, it will be very
+#  s - l - o - w. But it will work.
+#
+#    Author: TheRocker
+#    Email:  therocker@pawprints.2y.net
+#===============================================================
+
+TMPFILE=/tmp/qtmp.hndl
+TMPTOO=/tmp/qtwo.hndl
+
+#=======================================================================
+#
+#  This script will also work on AIX 4.2.1 BUT you have to change
+#  the following line.  AIX 4.2.1 does not support the -W option
+#  with lpstat.  For AIX 4.2.1 just remove the -W option and it should
+#  work just fine.
+#
+#=======================================================================
+
+`rsh $1 -l root lpstat -W | grep -e "DOWN" | tr -s ' ' | cut -d' ' -f1,3  > /tmp/qtmp.hndl 2> /tmp/q_err`
+
+if [ -s $TMPFILE ]
+then
+
+#=======================================================
+# 
+#  If you've seen the other AIX scripts I wrote you may
+#  notice that I use this bit of code a lot.  Well it 
+#  works and appears to be all purpose.
+#
+#=======================================================
+
+     LINES=`wc -l /tmp/qtmp.hndl | cut -c8`
+     LINESCTL=`wc -l /tmp/qtmp.hndl | cut -c8`
+
+     echo "Print Queue DOWN --> \c" 
+     
+     while [ $LINESCTL != 0 ]
+      do
+
+       cat $TMPFILE | tail -$LINESCTL > $TMPTOO
+       cat $TMPTOO > $TMPFILE
+       LINESCTL=$(( $LINESCTL -1 ))
+       LINES=$(( $LINES -1 ))
+       DATA=`head -1 /tmp/qtmp.hndl`
+       echo "( $DATA ) \c"
+       
+     
+     done
+
+     echo "\n"
+
+    rm -f $TMPFILE
+    rm -f $TMPTOO
+     exit 2
+
+fi
+    echo "Print Queues Running... OK"
+    exit 0
diff --git a/contrib/aix/pg_stat b/contrib/aix/pg_stat
new file mode 100644
index 00000000..e0603ec4
--- /dev/null
+++ b/contrib/aix/pg_stat
@@ -0,0 +1,45 @@
+#!/bin/ksh
+
+#==============================================================================
+# Script was originally created to collect stats and dump then to a log file
+# every five minutes.  But we like this better (the log file thing is still
+# good if you want to track availability).
+#
+#      Authors:  SpEnTBoY
+#                TheRocker
+#
+#      Email:    lonny@abyss.za.org
+#                therocker@pawprints.2y.net
+#==============================================================================
+
+#=========================================================================================
+#
+#  The best way to do this is to use Kerberos but we use rsh here because our monitoring
+#  workstation doesn't have Kerberos installed.  In order for this to work, the remote
+#  host ($1) must have a .rhosts file that contains a line like:
+#
+#       monitorhost nagiosuser
+#
+#=========================================================================================
+
+PAGING2=`rsh $1 -l root lsps -a -s | grep -v Paging | tr -s ' '|  cut -d' ' -f3 | cut -d'%' -f1` 
+
+                                                        
+if [ "$PAGING2" -gt "35" ] && [ "$PAGING2" -lt "50" ]                             
+then                                                    
+        echo "Paging Space is over 35% ("$PAGING2")%"
+exit 1
+fi
+
+if [ "$PAGING2" -gt "49" ]                              
+then                                                    
+        echo "WARNING! Paging Space is over 50% ("$PAGING2")%"
+exit 2
+fi
+
+if [ "$PAGING2" -lt "34" ]                              
+then                                                    
+        echo "Paging Space is less than 34% ("$PAGING2")%"
+exit 0
+fi
+
diff --git a/contrib/check_apache.pl b/contrib/check_apache.pl
new file mode 100644
index 00000000..b9e69a0c
--- /dev/null
+++ b/contrib/check_apache.pl
@@ -0,0 +1,283 @@
+#!/usr/bin/perl
+#
+# (c)2001 Sebastian Hetze, Linux Information Systems AG
+# send bug reports to <S.Hetze@Linux-AG.com>
+# 
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# you should have received a copy of the GNU General Public License
+# along with this program (or with Nagios);  if not, write to the
+# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA
+#
+#
+# Check apache status information provided by mod_status to find
+# out about the load (number of servers working) and the
+# performance (average response time for recent requests).
+#
+# Usage:
+# check_apache -H <host> [-lhV] [-w <warn>] [-c <crit>] [-u <url>]
+#
+# check_apache <host> <warn> <crit> <url> (if you cannot avoid it)
+#
+
+use LWP::UserAgent;
+use URI::URL;
+use Getopt::Long;
+Getopt::Long::Configure('bundling');
+
+$version=0.01;
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+
+#
+#              some default values
+#
+$perf_w=500;
+$perf_c=1000;
+$load_w=20;
+$load_c=30;
+$TIMEOUT=15;
+
+#
+#              get command line options the regular way
+#
+GetOptions
+        ("V"   => \$opt_V, "version"       => \$opt_V,
+         "h"   => \$opt_h, "help"          => \$opt_h,
+         "l"   => \$opt_l, "load"          => \$opt_l,
+         "v" => \$verbose, "verbose"       => \$verbose,
+         "w=s" => \$opt_w, "warning=s"     => \$opt_w,
+         "c=s" => \$opt_c, "critical=s"    => \$opt_c,
+         "H=s" => \$opt_H, "hostname=s"    => \$opt_H,
+         "u=s" => \$opt_u, "url=s"         => \$opt_u);
+
+#
+#              handle the verbose stuff first
+#
+if ($opt_V) {
+        print "\n";
+        print "check_apache nagios plugin version $version\n";
+        print "\n";
+        print "The nagios plugins come with ABSOLUTELY NO WARRANTY.  You may redistribute\n";
+        print "copies of the plugins under the terms of the GNU General Public License.\n";
+        print "For more information about these matters, see the file named COPYING.\n";
+        print "\n";
+        print "Copyright (c) 2001 Sebastian Hetze  Linux Information Systems AG\n";
+        print "\n";
+        print "\n";
+        exit $ERRORS{'UNKNOWN'};
+} 
+
+if ($opt_h) {
+        print_help();
+        exit $ERRORS{'UNKNOWN'};
+}
+
+#
+#              now get options the weired way and set the defaults
+#              if nothing else is provided
+#
+$opt_H = shift unless ($opt_H);
+print_usage() unless ($opt_H);
+
+if($opt_l) {
+   $autostring="?auto";
+   ($opt_w) || ($opt_w = shift) || ($opt_w = $load_w);
+   $warn = $1 if ($opt_w =~ /([0-9]+)/);
+   ($opt_c) || ($opt_c = shift) || ($opt_c = $load_c);
+   $alert = $1 if ($opt_c =~ /([0-9]+)/);
+} else {
+   $autostring="";
+   ($opt_w) || ($opt_w = shift) || ($opt_w = $perf_w);
+   $warn = $1 if ($opt_w =~ /([0-9]+)/);
+   ($opt_c) || ($opt_c = shift) || ($opt_c = $perf_c);
+   $alert = $1 if ($opt_c =~ /([0-9]+)/);
+}
+
+($opt_u) || ($opt_u = shift) || ($opt_u = "/server-status");
+
+
+#
+#              dont let us wait forever...
+#
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No response from HTTP server (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+#
+#              now we set things up for the real work
+#              and fire up the request
+#
+$ua = new LWP::UserAgent;
+$ua->agent("Nagios/0.1 " . $ua->agent);
+
+
+$urlstring = "http://" . $opt_H . $opt_u . $autostring;
+$url = url($urlstring);
+
+my $req = new HTTP::Request 'GET', $url;
+my $res = $ua->request($req);
+
+#
+#              hopefully we´ve got something usefull
+#
+if ($res->is_success) {
+  if($opt_l) {
+     foreach $_ (split /^/m, $res->content) {
+        next if /^\s*$/;
+#
+#              this is the load checking section
+#              we parse the whole content, just in case someone
+#              wants to use this some day in the future
+#
+        if (/^Total Accesses:\s+([0-9.]+)/) { $accesses = $1; next; }
+        if (/^Total kBytes:\s+([0-9.]+)/) { $kbytes = $1; next; }
+        if (/^CPULoad:\s+([0-9.]+)\s+/) { $load = $1; next; }
+        if (/^Uptime:\s+([0-9.]+)\s+/) { $uptime = $1; next; }
+        if (/^ReqPerSec:\s+([0-9.]+)\s+/) { $rps = $1; next; }
+        if (/^BytesPerSec:\s+([0-9.]+)\s+/) { $bps = $1; next; }
+        if (/^BytesPerReq:\s+([0-9.]+)\s+/) { $bpr = $1; next; }
+        if (/^BusyServers:\s+([0-9.]+)\s+/) { $busy = $1; next; }
+        if (/^IdleServers:\s+([0-9.]+)\s+/) { $idle = $1; next; }
+        if (/^Scoreboard:\s+([SRWKDLG_.]+)\s+/) { $score = $1; next; }
+        print "Unknown Status\n";
+        exit $ERRORS{"UNKNOWN"};
+     }
+#
+#              now we even parse the whole scoreboard, just for fun
+#
+     foreach $scorepoint (split //m, $score) {
+        if($scorepoint eq '.') { $scores{'.'}+=1; next; }  # Unused
+        if($scorepoint eq '_') { $scores{'_'}+=1; next; }  # Waiting
+        if($scorepoint eq 'S') { $scores{'S'}+=1; next; }  # Starting
+        if($scorepoint eq 'R') { $scores{'R'}+=1; next; }  # Reading
+        if($scorepoint eq 'W') { $scores{'W'}+=1; next; }  # Writing
+        if($scorepoint eq 'K') { $scores{'K'}+=1; next; }  # Keepalive
+        if($scorepoint eq 'D') { $scores{'D'}+=1; next; }  # DNS Lookup
+        if($scorepoint eq 'L') { $scores{'L'}+=1; next; }  # Logging
+        if($scorepoint eq 'G') { $scores{'G'}+=1; next; }  # Going
+     }
+
+     if($busy>$alert) {
+        printf "HTTPD CRITICAL: %.0f servers running\n", $busy;
+        exit $ERRORS{"CRITICAL"};
+     }
+     if($busy>$warn) {
+        printf "HTTPD WARNING: %.0f servers running\n", $busy;
+        exit $ERRORS{"WARNING"};
+     }
+     printf "HTTPD ok: %.0f servers running, %d idle\n", $busy, $idle;
+     exit $ERRORS{"OK"};
+
+  } else {
+#
+#              this is the performance check section
+#              We are a bit lazy here, no parsing of the initial data
+#              block and the scoreboard.
+#              However, you have the whole set of per server
+#              information to play with ;-)
+#              The actual performance is measured by adding up the
+#              milliseconds required to process the most recent
+#              requests of all instances and then taking the average.
+#
+     foreach $tablerow (split /<tr>/m, $res->content) {
+         ($empty,$Srv,$PID,$Acc,$M,$CPU,$SS,$Req,$Conn,$Child,$Slot,$Client,$VHost,$Request)
+         = split /<td>/, $tablerow;
+         if($Req) {
+              $lines+=1;
+              $req_sum+=$Req;
+         }
+         undef $Req;
+     }
+     $average=$req_sum/$lines;
+     if($average>$alert) {
+        printf "HTTPD CRITICAL: average response time %.0f
+        milliseconds\n", $average;
+        exit $ERRORS{"CRITICAL"};
+     }
+     if($average>$warn) {
+        printf "HTTPD WARNING: average response time %.0f
+        milliseconds\n", $average;
+        exit $ERRORS{"WARNING"};
+     }
+     if($average>0) {
+        printf "HTTPD ok: average response time %.0f milliseconds\n",
+        $average;
+        exit $ERRORS{"OK"};
+     }
+     print "Unknown Status\n";
+     exit $ERRORS{"UNKNOWN"};
+  }
+} else {
+        print "HTTP request failed\n";
+        exit $ERRORS{"CRITICAL"};
+}
+
+
+#
+#              ok, now we are almost through
+#              These last subroutines do the things for those that do not
+#              read source code.
+#
+sub print_usage () {
+        print "Usage: $0 -H <host> [-lhV] [-w <warn>] [-c <crit>] [-u <url>]\n"; }
+ 
+sub print_help () {
+        print "\n";
+        print "\n";
+        print "check_apache nagios plugin version $version\n";
+        print "\n";
+        print "The nagios plugins come with ABSOLUTELY NO WARRANTY.  You may redistribute\n";
+        print "copies of the plugins under the terms of the GNU General Public License.\n";
+        print "For more information about these matters, see the file named COPYING.\n";
+        print "\n";
+        print "Copyright (c) 2001 Sebastian Hetze  Linux Information Systems AG\n";
+        print "\n";
+        print "\n";
+        print "This plugin checks the apache HTTP service on the specified host.\n";
+        print "It uses the mod_status facilities provided by the apache server.\n";
+        print "The monitoring server must be authorized in httpd.conf.\n";
+        print "\n";
+        print "\n";
+        print_usage();
+        print "\n";
+        print "Options:\n";
+        print " -H, --hostname=ADDRESS\n";
+        print "     host name argument for server.\n";
+        print " -l, --load\n";
+        print "     check load instead of performance.\n";
+        print " -h, --help\n";
+        print "     print detailed help screen.\n";
+        print " -V, --version\n";
+        print "     print version information.\n";
+        print " -w, --warning=INTEGER\n";
+        print "     load / performance level at which a warning message will be gererated.\n";
+        print " -c, --critical=INTEGER\n";
+        print "     load / performance level at which a critical message will be gererated.\n";
+        print " -u, --url=PATH\n";
+        print "     location to call mod_status.\n";
+        print "\n";
+        print "     Defaults for performance checking are $perf_w/$perf_c msec.\n";
+        print "     Defaults for load checking are $load_w/$load_c servers running.\n";
+        print "\n";
+        print "\n";
+} 
+#
+#              the end
+#
diff --git a/contrib/check_apc_ups.pl b/contrib/check_apc_ups.pl
new file mode 100644
index 00000000..dd979f52
--- /dev/null
+++ b/contrib/check_apc_ups.pl
@@ -0,0 +1,314 @@
+#! /usr/bin/perl -wT
+#
+# Check_apc_ups - Check APC UPS status via SNMP
+# Shamelessly copied from check_breeze.pl
+#
+# To do:
+# - Send SNMP queries directly, instead of forking `snmpget`.
+# - Make the status less verbose.  Maybe we can send an "onLine, time
+#   remaining: hh:mm:ss" if all is well, and a list of specific problems
+#   if something is broken. 
+
+BEGIN {
+        if ($0 =~ m/^(.*?)[\/\\]([^\/\\]+)$/) {
+                $runtimedir = $1;
+                $PROGNAME = $2;
+        }
+}
+
+use strict;
+use Getopt::Long;
+use vars qw($opt_V $opt_h $opt_H $opt_T $opt_t $opt_R $opt_r 
+  $opt_L $opt_l $PROGNAME);
+use lib $main::runtimedir;
+use utils qw(%ERRORS &print_revision &support &usage);
+
+sub print_help ();
+sub print_usage ();
+sub get_snmp_int_val ($);
+sub escalate_exitval ($);
+
+$ENV{'PATH'}='';
+$ENV{'BASH_ENV'}=''; 
+$ENV{'ENV'}='';
+
+Getopt::Long::Configure('bundling');
+GetOptions
+        ("V"   => \$opt_V, "version"            => \$opt_V,
+         "h"   => \$opt_h, "help"               => \$opt_h,
+         "T=s" => \$opt_T, "temp-critical"      => \$opt_T,
+         "t=s" => \$opt_t, "temp-warning"       => \$opt_t,
+         "R=s" => \$opt_R, "runtime-critical"   => \$opt_R,
+         "r=s" => \$opt_r, "runtime-warning"    => \$opt_r,
+         "L=s" => \$opt_L, "load-critical"      => \$opt_L,
+         "l=s" => \$opt_l, "load-warning"       => \$opt_l,
+         "H=s" => \$opt_H, "hostname=s"         => \$opt_H);
+
+if ($opt_V) {
+        print_revision($PROGNAME,'$Revision$');
+        exit $ERRORS{'OK'};
+}
+
+if ($opt_h) {print_help(); exit $ERRORS{'OK'};}
+
+($opt_H) || ($opt_H = shift) || usage("Host name/address not specified\n");
+my $host = $1 if ($opt_H =~ /([-.A-Za-z0-9]+)/);
+($host) || usage("Invalid host: $opt_H\n");
+
+# Defaults
+
+$opt_R *= 60 * 100 if (defined $opt_R); # Convert minutes to secs/100
+$opt_r *= 60 * 100 if (defined $opt_R);
+
+my $tempcrit    = $opt_T || 60;
+my $tempwarn    = $opt_t || 40;
+my $runtimecrit = $opt_R || 30 * 60 * 100;     # Secs / 100
+my $runtimewarn = $opt_r || 60 * 60 * 100;
+my $loadcrit    = $opt_L || 85;
+my $loadwarn    = $opt_l || 50;
+
+if ($tempcrit !~ /\d+/) { usage ("Invalid critical temperature threshold.\n"); }
+if ($tempwarn !~ /\d+/) { usage ("Invalid critical temperature threshold.\n"); }
+
+if ($runtimecrit !~ /\d+/) {
+  usage ("Invalid critical run time threshold.\n");
+}
+if ($runtimewarn !~ /\d+/) {
+  usage ("Invalid warning run time threshold.\n");
+}
+
+if ($loadcrit !~ /\d+/ || $loadcrit < 0 || $loadcrit > 100) {
+  usage ("Invalid critical load threshold.\n");
+}
+if ($loadwarn !~ /\d+/ || $loadwarn < 0 || $loadwarn > 100) {
+  usage ("Invalid warning load threshold.\n");
+}
+
+
+# APC UPS OIDs
+# APC MIBs are available at ftp://ftp.apcftp.com/software/pnetmib/mib
+my $upsBasicOutputStatus          = ".1.3.6.1.4.1.318.1.1.1.4.1.1.0";
+my $upsBasicBatteryStatus         = ".1.3.6.1.4.1.318.1.1.1.2.1.1.0";
+my $upsAdvInputLineFailCause      = ".1.3.6.1.4.1.318.1.1.1.3.2.5.0";
+my $upsAdvBatteryTemperature      = ".1.3.6.1.4.1.318.1.1.1.2.2.2.0";
+my $upsAdvBatteryRunTimeRemaining = ".1.3.6.1.4.1.318.1.1.1.2.2.3.0";
+my $upsAdvBatteryReplaceIndicator = ".1.3.6.1.4.1.318.1.1.1.2.2.4.0";
+my $upsAdvOutputLoad              = ".1.3.6.1.4.1.318.1.1.1.4.2.3.0";
+my $upsAdvTestDiagnosticsResults  = ".1.3.6.1.4.1.318.1.1.1.7.2.3.0";
+
+my @outputStatVals = (
+  [ undef, undef ],                                     # pad 0
+  [ undef, undef ],                                     # pad 1
+  [ "onLine",                   $ERRORS{'OK'} ],        # 2
+  [ "onBattery",                $ERRORS{'WARNING'} ],   # 3
+  [ "onSmartBoost",             $ERRORS{'WARNING'} ],   # 4
+  [ "timedSleeping",            $ERRORS{'WARNING'} ],   # 5
+  [ "softwareBypass",           $ERRORS{'WARNING'} ],   # 6
+  [ "off",                      $ERRORS{'CRITICAL'} ],  # 7
+  [ "rebooting",                $ERRORS{'WARNING'} ],   # 8
+  [ "switchedBypass",           $ERRORS{'WARNING'} ],   # 9
+  [ "hardwareFailureBypass",    $ERRORS{'CRITICAL'} ],  # 10
+  [ "sleepingUntilPowerReturn", $ERRORS{'CRITICAL'} ],  # 11
+  [ "onSmartTrim",              $ERRORS{'WARNING'} ],   # 12
+);
+
+my @failCauseVals = (
+  undef,
+  "noTransfer",
+  "highLineVoltage",
+  "brownout",
+  "blackout",
+  "smallMomentarySag",
+  "deepMomentarySag",
+  "smallMomentarySpike",
+  "largeMomentarySpike",
+  "selfTest",
+  "rateOfVoltageChnage",
+);
+
+my @battStatVals = (
+  [ undef, undef ],                             # pad 0
+  [ undef, undef ],                             # pad 1
+  [ "batteryNormal",    $ERRORS{'OK'} ],        # 2
+  [ "batteryLow",       $ERRORS{'CRITICAL'} ],  # 3
+);
+
+my @battReplVals = (
+  [ undef, undef ],                                     # pad 0
+  [ "noBatteryNeedsReplacing",  $ERRORS{'OK'} ],        # 1
+  [ "batteryNeedsReplacing",    $ERRORS{'CRITICAL'} ],  # 2
+);
+
+my @diagnosticsResultsVals = (
+  [ undef, undef ],                             # pad 0
+  [ "OK",               $ERRORS{'OK'} ],        # 1
+  [ "failed",           $ERRORS{'CRITICAL'} ],  # 2
+  [ "invalidTest",      $ERRORS{'CRITICAL'} ],  # 3
+  [ "testInProgress",   $ERRORS{'OK'} ],        # 4
+);
+
+my $exitval     = $ERRORS{'UNKNOWN'};
+my $data;
+my $onbattery   = 3;
+
+$data = get_snmp_int_val( $upsBasicOutputStatus );
+
+print "Output status: ";
+if (defined ($data) && defined ($outputStatVals[$data][0])) {
+  print "$outputStatVals[$data][0] | ";
+  escalate_exitval($outputStatVals[$data][1]);
+} else {
+  print "unknown | ";
+}
+
+$data = get_snmp_int_val( $upsAdvBatteryRunTimeRemaining );
+
+print "Rem time: ";
+if (defined ($data)) {
+  my $hrs  = int($data / (60 * 60 * 100)); # Data is hundredths of a second
+  my $mins = int($data / (60 * 100)) % 60;
+  my $secs = ($data % 100) / 100;
+  printf "%d:%02d:%05.2f | ", $hrs, $mins, $secs;
+  if ($data <= $runtimecrit) {
+    escalate_exitval($ERRORS{'CRITICAL'});
+  } elsif ($data <= $runtimewarn) {
+    escalate_exitval($ERRORS{'WARNING'});
+  } else {
+    escalate_exitval($ERRORS{'OK'});
+  }
+} else {
+  print "unknown | ";
+}
+
+$data = get_snmp_int_val( $upsBasicBatteryStatus );
+
+print "Battery status: ";
+if (defined ($data) && defined ($battStatVals[$data][0])) {
+  my $failcause = "unknown";
+  my $fc = get_snmp_int_val( $upsAdvInputLineFailCause );
+  if ($data == $onbattery) {
+    if (defined ($failCauseVals[$fc])) { $failcause = $failCauseVals[$fc]; }
+    print "$battStatVals[$data][0] ($failcause) | ";
+  } else {
+    print "$battStatVals[$data][0] | ";
+  }
+  escalate_exitval($battStatVals[$data][1]);
+} else {
+  print "unknown | ";
+}
+
+$data = get_snmp_int_val( $upsAdvBatteryTemperature );
+
+print "Battery temp(C): ";
+if (defined ($data)) {
+  print "$data | ";
+  if ($data >= $tempcrit) {
+    escalate_exitval($ERRORS{'CRITICAL'});
+  } elsif ($data >= $tempwarn) {
+    escalate_exitval($ERRORS{'WARNING'});
+  } else {
+    escalate_exitval($ERRORS{'OK'});
+  }
+} else {
+  print "unknown | ";
+}
+
+$data = get_snmp_int_val( $upsAdvBatteryReplaceIndicator );
+
+print "Battery repl: ";
+if (defined ($data) && defined ($battReplVals[$data][0])) {
+  print "$battReplVals[$data][0] | ";
+  escalate_exitval($battReplVals[$data][1]);
+} else {
+  print "unknown | ";
+}
+
+$data = get_snmp_int_val( $upsAdvOutputLoad );
+
+print "Output load (%): ";
+if (defined ($data)) {
+  print "$data | ";
+  if ($data >= $loadcrit) {
+    escalate_exitval($ERRORS{'CRITICAL'});
+  } elsif ($data >= $loadwarn) {
+    escalate_exitval($ERRORS{'WARNING'});
+  } else {
+    escalate_exitval($ERRORS{'OK'});
+  }
+} else {
+  print "unknown | ";
+}
+
+$data = get_snmp_int_val( $upsAdvTestDiagnosticsResults );
+
+print "Diag result: ";
+if (defined ($data) && defined ($diagnosticsResultsVals[$data][0])) {
+  print "$diagnosticsResultsVals[$data][0]\n";
+  escalate_exitval($diagnosticsResultsVals[$data][1]);
+} else {
+  print "unknown\n";
+}
+
+
+exit $exitval;
+
+
+sub print_usage () {
+        print "Usage: $PROGNAME -H <host> -T temp -t temp -R minutes -r minutes\n";
+        print "  -L percent -l percent\n";
+}
+
+sub print_help () {
+        print_revision($PROGNAME,'$Revision$');
+        print "Copyright (c) 2001 Gerald Combs/Jeffrey Blank/Karl DeBisschop
+
+This plugin reports the status of an APC UPS equipped with an SNMP management
+module.
+
+";
+        print_usage();
+        print "
+-H, --hostname=HOST
+   Name or IP address of host to check
+-T --temp-critical
+   Battery degrees C above which a CRITICAL status will result (default: 60)
+-t --temp-warning
+   Battery degrees C above which a WARNING status will result (default: 40)
+-R --runtime-critical
+   Minutes remaining below which a CRITICAL status will result (default: 30)
+-r --runtime-warning
+   Minutes remaining below which a WARNING status will result (default: 60)
+-L --load-critical
+   Output load pct above which a CRITICAL status will result (default: 85
+-l --load-warning
+   Output load pct above which a WARNING status will result (default: 50
+
+";
+        support();
+}
+
+sub get_snmp_int_val ($) {
+  my $val=0;
+  my $oid = shift(@_);
+
+  $val = `/usr/bin/snmpget $host public $oid 2> /dev/null`;
+  my @test = split(/ /,$val,3);
+
+  return undef unless (defined ($test[2]));
+
+  if ($test[2] =~ /\(\d+\)/) {  # Later versions of UCD SNMP
+    ($val) = ($test[2] =~ /\((\d+)\)/);
+  } elsif ($test[2] =~ /: \d+/) {
+    ($val) = ($test[2] =~ /: (\d+)/);
+  } else {
+    $val = $test[2];
+  }
+
+  return $val;
+}
+
+sub escalate_exitval ($) {
+  my $newval = shift(@_);
+
+  if ($newval > $exitval) { $exitval = $newval; }
+}
diff --git a/contrib/check_bgpstate.pl b/contrib/check_bgpstate.pl
new file mode 100644
index 00000000..6658a0b8
--- /dev/null
+++ b/contrib/check_bgpstate.pl
@@ -0,0 +1,215 @@
+#!/usr/bin/perl -w
+#
+# check_bgpstate.pl - nagios plugin 
+#
+# Copyright (C) 2000 Christoph Kron
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+#
+# Report bugs to: ck@zet.net
+#
+# 11.01.2000 Version 1.0
+
+
+
+use strict;
+
+use Net::SNMP;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+
+# whois programm for RIPE database queries
+my $whois = '/usr/bin/whois';
+my $status;
+my $TIMEOUT = 30;
+
+# critical bgp sessions
+my %uplinks = ( 1273, 'Uplink ECRC',
+                1755, 'Uplink EBONE',
+                3300, 'Uplink AUCS'
+              );
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+
+my %bgpPeerState = (  
+           '1',"idle",
+           '2',"connect",
+           '3',"active",
+           '4',"opensent",
+           '5',"openconfirm",
+           '6',"established"
+        );
+my $state = "UNKNOWN";
+my $answer = "";
+my $snmpkey;
+my $snmpoid;
+my $key;
+my $community = "public";
+my $port = 161;
+my @snmpoids;
+my $snmpbgpPeerState = '1.3.6.1.2.1.15.3.1.2';
+my $snmpbgpPeerLocalAddr = '1.3.6.1.2.1.15.3.1.5';
+my $snmpbgpPeerRemoteAddr = '1.3.6.1.2.1.15.3.1.7';
+my $snmpbgpPeerRemoteAs = '1.3.6.1.2.1.15.3.1.9';
+my $hostname;
+my $session;
+my $error;
+my $response;
+my %bgpStatus;
+my $bgpestablished =0 ;
+my $bgpcritical =0;
+my $bgpdown =0;
+my $bgpidle =0;
+my $bgpmessage;
+my $asname;
+my $remoteas;
+my @output;
+
+sub usage {
+  printf "\nMissing arguments!\n";
+  printf "\n";
+  printf "Perl bgpstate plugin for Nagios\n";
+  printf "monitors all BGP sessions\n";
+  printf "usage: \n";
+  printf "check_bgpstate.pl -c <READCOMMUNITY> -p <PORT> <HOSTNAME>\n";
+  printf "Copyright (C) 2000 Christoph Kron\n";
+  printf "check_bgpstate.pl comes with ABSOLUTELY NO WARRANTY\n";
+  printf "This programm is licensed under the terms of the ";
+  printf "GNU General Public License\n(check source code for details)\n";
+  printf "\n\n";
+  exit $ERRORS{"UNKNOWN"};
+}
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No snmp response from $hostname (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+$status = GetOptions("community=s",\$community,
+                     "port=i",\$port);
+if ($status == 0)
+{
+        &usage;
+}
+  
+   #shift;
+   $hostname  = shift || &usage;
+
+
+push(@snmpoids, $snmpbgpPeerState);
+push(@snmpoids, $snmpbgpPeerLocalAddr);
+push(@snmpoids, $snmpbgpPeerRemoteAddr);
+push(@snmpoids, $snmpbgpPeerRemoteAs);
+
+foreach $snmpoid (@snmpoids) {
+
+   ($session, $error) = Net::SNMP->session(
+      -hostname  => $hostname,
+      -community => $community,
+      -port      => $port
+   );
+
+   if (!defined($session)) {
+      $state='UNKNOWN';
+      $answer=$error;
+      print ("$state: $answer");
+      exit $ERRORS{$state};
+   }
+
+   if (!defined($response = $session->get_table($snmpoid))) {
+      $answer=$session->error;
+      $session->close;
+      $state = 'CRITICAL';
+      print ("$state: $answer,$community,$snmpkey");
+      exit $ERRORS{$state};
+   }
+
+   foreach $snmpkey (keys %{$response}) {
+      $snmpkey =~ m/.*\.(\d+\.\d+\.\d+\.\d+$)/;
+      $key =  $1;
+#      printf "debug: $snmpkey: $key -> $response->{$snmpkey}\n";
+      $bgpStatus{$key}{$snmpoid} = $response->{$snmpkey};
+   }
+   $session->close;
+}
+
+foreach $key (keys %bgpStatus) {
+   if ($bgpStatus{$key}{$snmpbgpPeerState} == 6 ) { 
+      $bgpestablished++;
+   }
+   elsif ($bgpStatus{$key}{$snmpbgpPeerState} == 1 ) {
+      $bgpidle++;
+   }
+   else { 
+       $bgpdown++ ;
+       if (exists($uplinks{$bgpStatus{$key}{$snmpbgpPeerRemoteAs}}) ) {
+          $bgpcritical++;
+       }
+       @output = `$whois -T aut-num AS$bgpStatus{$key}{$snmpbgpPeerRemoteAs}`;
+
+   $asname = "";
+   foreach (@output) {
+     if (m/as-name/) {
+        $asname = $_;
+        $asname =~ s/as-name://;
+        last;
+     }
+     if ( $asname =~ "" && m/descr/ ) {
+        $asname = $_;
+        $asname =~ s/descr://;
+     }
+   }
+   $asname =~ s/^\s*//;
+   $asname =~ s/\s*$//;
+       $bgpmessage .= sprintf("Peering with AS%s not established -> %s<BR>",
+                           $bgpStatus{$key}{$snmpbgpPeerRemoteAs},
+                           $asname);
+   }
+}
+   
+
+   if ($bgpdown > 0) {
+      if ($bgpcritical > 0) {
+         $state = 'CRITICAL';
+      }
+      else {
+         $state = 'WARNING';
+      }
+      $answer = sprintf("host '%s', sessions up: %d, down: %d, shutdown: %d<BR>",
+                        $hostname,
+                        $bgpestablished,
+                        $bgpdown, $bgpidle);
+      $answer = $answer . $bgpmessage . "\n";
+   }
+   else {
+      $state = 'OK';
+      $answer = sprintf("host '%s', sessions up: %d, down: %d, shutdown: %d\n",
+                        $hostname,
+                        $bgpestablished,
+                        $bgpdown,$bgpidle);
+   }
+
+print ("$state: $answer");
+exit $ERRORS{$state};
+
diff --git a/contrib/check_dhcp.c b/contrib/check_dhcp.c
new file mode 100644
index 00000000..8168b947
--- /dev/null
+++ b/contrib/check_dhcp.c
@@ -0,0 +1,992 @@
+/******************************************************************************
+*
+* CHECK_DHCP.C
+*
+* Program: DHCP plugin for Nagios
+* License: GPL
+* Copyright (c) 2001 Ethan Galstad (nagios@nagios.org)
+*
+* License Information:
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+*****************************************************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+#include <features.h>
+#include <linux/if_ether.h>
+#include <getopt.h>
+#include <net/if.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+
+#define PROGNAME "check_dhcp"
+
+/*#define DEBUG*/
+#define HAVE_GETOPT_H
+
+
+/**** Common definitions ****/
+
+#define STATE_OK          0
+#define STATE_WARNING     1
+#define STATE_CRITICAL    2
+#define STATE_UNKNOWN     -1
+
+#define OK                0
+#define ERROR             -1
+
+#define FALSE             0
+#define TRUE              1
+
+
+/**** DHCP definitions ****/
+
+#define MAX_DHCP_CHADDR_LENGTH           16
+#define MAX_DHCP_SNAME_LENGTH            64
+#define MAX_DHCP_FILE_LENGTH             128
+#define MAX_DHCP_OPTIONS_LENGTH          312
+
+
+typedef struct dhcp_packet_struct{
+        u_int8_t  op;                   /* packet type */
+        u_int8_t  htype;                /* type of hardware address for this machine (Ethernet, etc) */
+        u_int8_t  hlen;                 /* length of hardware address (of this machine) */
+        u_int8_t  hops;                 /* hops */
+        u_int32_t xid;                  /* random transaction id number - chosen by this machine */
+        u_int16_t secs;                 /* seconds used in timing */
+        u_int16_t flags;                /* flags */
+        struct in_addr ciaddr;          /* IP address of this machine (if we already have one) */
+        struct in_addr yiaddr;          /* IP address of this machine (offered by the DHCP server) */
+        struct in_addr siaddr;          /* IP address of DHCP server */
+        struct in_addr giaddr;          /* IP address of DHCP relay */
+        unsigned char chaddr [MAX_DHCP_CHADDR_LENGTH];      /* hardware address of this machine */
+        char sname [MAX_DHCP_SNAME_LENGTH];    /* name of DHCP server */
+        char file [MAX_DHCP_FILE_LENGTH];      /* boot file name (used for diskless booting?) */
+        char options[MAX_DHCP_OPTIONS_LENGTH];  /* options */
+        }dhcp_packet;
+
+
+typedef struct dhcp_offer_struct{
+        struct in_addr server_address;   /* address of DHCP server that sent this offer */
+        struct in_addr offered_address;  /* the IP address that was offered to us */
+        u_int32_t lease_time;            /* lease time in seconds */
+        u_int32_t renewal_time;          /* renewal time in seconds */
+        u_int32_t rebinding_time;        /* rebinding time in seconds */
+        struct dhcp_offer_struct *next;
+        }dhcp_offer;
+
+
+typedef struct requested_server_struct{
+        struct in_addr server_address;
+        struct requested_server_struct *next;
+        }requested_server;
+
+
+#define BOOTREQUEST     1
+#define BOOTREPLY       2
+
+#define DHCPDISCOVER    1
+#define DHCPOFFER       2
+#define DHCPREQUEST     3
+#define DHCPDECLINE     4
+#define DHCPACK         5
+#define DHCPNACK        6
+#define DHCPRELEASE     7
+
+#define DHCP_OPTION_MESSAGE_TYPE        53
+#define DHCP_OPTION_HOST_NAME           12
+#define DHCP_OPTION_BROADCAST_ADDRESS   28
+#define DHCP_OPTION_REQUESTED_ADDRESS   50
+#define DHCP_OPTION_LEASE_TIME          51
+#define DHCP_OPTION_RENEWAL_TIME        58
+#define DHCP_OPTION_REBINDING_TIME      59
+
+#define DHCP_INFINITE_TIME              0xFFFFFFFF
+
+#define DHCP_BROADCAST_FLAG 32768
+
+#define DHCP_SERVER_PORT   67
+#define DHCP_CLIENT_PORT   68
+
+#define ETHERNET_HARDWARE_ADDRESS            1     /* used in htype field of dhcp packet */
+#define ETHERNET_HARDWARE_ADDRESS_LENGTH     6     /* length of Ethernet hardware addresses */
+
+unsigned char client_hardware_address[MAX_DHCP_CHADDR_LENGTH]="";
+
+char network_interface_name[8]="eth0";
+
+u_int32_t packet_xid=0;
+
+u_int32_t dhcp_lease_time=0;
+u_int32_t dhcp_renewal_time=0;
+u_int32_t dhcp_rebinding_time=0;
+
+int dhcpoffer_timeout=2;
+
+dhcp_offer *dhcp_offer_list=NULL;
+requested_server *requested_server_list=NULL;
+
+int valid_responses=0;     /* number of valid DHCPOFFERs we received */
+int requested_servers=0;   
+int requested_responses=0;
+
+int request_specific_address=FALSE;
+int received_requested_address=FALSE;
+struct in_addr requested_address;
+
+
+int process_arguments(int, char **);
+int call_getopt(int, char **);
+int validate_arguments(void);
+void print_usage(void);
+void print_help(void);
+
+int get_hardware_address(int,char *);
+
+int send_dhcp_discover(int);
+int get_dhcp_offer(int);
+
+int get_results(void);
+
+int add_dhcp_offer(struct in_addr,dhcp_packet *);
+int free_dhcp_offer_list(void);
+int free_requested_server_list(void);
+
+int create_dhcp_socket(void);
+int close_dhcp_socket(int);
+int send_dhcp_packet(void *,int,int,struct sockaddr_in *);
+int receive_dhcp_packet(void *,int,int,int,struct sockaddr_in *);
+
+
+
+int main(int argc, char **argv){
+        int dhcp_socket;
+        int result;
+
+        if(process_arguments(argc,argv)!=OK){
+                /*usage("Invalid command arguments supplied\n");*/
+                printf("Invalid command arguments supplied\n");
+                exit(STATE_UNKNOWN);
+                }
+
+
+        /* create socket for DHCP communications */
+        dhcp_socket=create_dhcp_socket();
+
+        /* get hardware address of client machine */
+        get_hardware_address(dhcp_socket,network_interface_name);
+
+        /* send DHCPDISCOVER packet */
+        send_dhcp_discover(dhcp_socket);
+
+        /* wait for a DHCPOFFER packet */
+        get_dhcp_offer(dhcp_socket);
+
+        /* close socket we created */
+        close_dhcp_socket(dhcp_socket);
+
+        /* determine state/plugin output to return */
+        result=get_results();
+
+        /* free allocated memory */
+        free_dhcp_offer_list();
+        free_requested_server_list();
+
+        return result;
+        }
+
+
+
+/* determines hardware address on client machine */
+int get_hardware_address(int sock,char *interface_name){
+        struct ifreq ifr;
+
+        strncpy((char *)&ifr.ifr_name,interface_name,sizeof(ifr.ifr_name));
+        
+        /* try and grab hardware address of requested interface */
+        if(ioctl(sock,SIOCGIFHWADDR,&ifr)<0){
+                printf("Error: Could not get hardware address of interface '%s'\n",interface_name);
+                exit(STATE_UNKNOWN);
+                }
+
+        memcpy(&client_hardware_address[0],&ifr.ifr_hwaddr.sa_data,6);
+
+#ifdef DEBUG
+        printf("Hardware address: %02x:%02x:%02x:",client_hardware_address[0],client_hardware_address[1],client_hardware_address[2]);
+        printf("%02x:",client_hardware_address[3]);
+        printf("%02x:%02x\n",client_hardware_address[4],client_hardware_address[5]);
+        printf("\n");
+#endif
+
+        return OK;
+        }
+
+
+/* sends a DHCPDISCOVER broadcast message in an attempt to find DHCP servers */
+int send_dhcp_discover(int sock){
+        dhcp_packet discover_packet;
+        struct sockaddr_in sockaddr_broadcast;
+
+
+        /* clear the packet data structure */
+        bzero(&discover_packet,sizeof(discover_packet));
+
+
+        /* boot request flag (backward compatible with BOOTP servers) */
+        discover_packet.op=BOOTREQUEST;
+
+        /* hardware address type */
+        discover_packet.htype=ETHERNET_HARDWARE_ADDRESS;
+
+        /* length of our hardware address */
+        discover_packet.hlen=ETHERNET_HARDWARE_ADDRESS_LENGTH;
+
+        discover_packet.hops=0;
+
+        /* transaction id is supposed to be random */
+        srand(time(NULL));
+        packet_xid=random();
+        discover_packet.xid=htonl(packet_xid);
+
+        /**** WHAT THE HECK IS UP WITH THIS?!?  IF I DON'T MAKE THIS CALL, ONLY ONE SERVER RESPONSE IS PROCESSED!!!! ****/
+        /* downright bizzarre... */
+        ntohl(discover_packet.xid);
+
+        /*discover_packet.secs=htons(65535);*/
+        discover_packet.secs=0xFF;
+
+        /* tell server it should broadcast its response */ 
+        discover_packet.flags=htons(DHCP_BROADCAST_FLAG);
+
+        /* our hardware address */
+        memcpy(discover_packet.chaddr,client_hardware_address,ETHERNET_HARDWARE_ADDRESS_LENGTH);
+
+        /* first four bytes of options field is magic cookie (as per RFC 2132) */
+        discover_packet.options[0]='\x63';
+        discover_packet.options[1]='\x82';
+        discover_packet.options[2]='\x53';
+        discover_packet.options[3]='\x63';
+
+        /* DHCP message type is embedded in options field */
+        discover_packet.options[4]=DHCP_OPTION_MESSAGE_TYPE;    /* DHCP message type option identifier */
+        discover_packet.options[5]='\x01';               /* DHCP message option length in bytes */
+        discover_packet.options[6]=DHCPDISCOVER;
+
+        /* the IP address we're requesting */
+        if(request_specific_address==TRUE){
+                discover_packet.options[7]=DHCP_OPTION_REQUESTED_ADDRESS;
+                discover_packet.options[8]='\x04';
+                memcpy(&discover_packet.options[9],&requested_address,sizeof(requested_address));
+                }
+        
+        /* send the DHCPDISCOVER packet to broadcast address */
+        sockaddr_broadcast.sin_family=AF_INET;
+        sockaddr_broadcast.sin_port=htons(DHCP_SERVER_PORT);
+        sockaddr_broadcast.sin_addr.s_addr=INADDR_BROADCAST;
+        bzero(&sockaddr_broadcast.sin_zero,sizeof(sockaddr_broadcast.sin_zero));
+
+
+#ifdef DEBUG
+        printf("DHCPDISCOVER to %s port %d\n",inet_ntoa(sockaddr_broadcast.sin_addr),ntohs(sockaddr_broadcast.sin_port));
+        printf("DHCPDISCOVER XID: %lu (0x%X)\n",ntohl(discover_packet.xid),ntohl(discover_packet.xid));
+        printf("DHCDISCOVER ciaddr:  %s\n",inet_ntoa(discover_packet.ciaddr));
+        printf("DHCDISCOVER yiaddr:  %s\n",inet_ntoa(discover_packet.yiaddr));
+        printf("DHCDISCOVER siaddr:  %s\n",inet_ntoa(discover_packet.siaddr));
+        printf("DHCDISCOVER giaddr:  %s\n",inet_ntoa(discover_packet.giaddr));
+#endif
+
+        /* send the DHCPDISCOVER packet out */
+        send_dhcp_packet(&discover_packet,sizeof(discover_packet),sock,&sockaddr_broadcast);
+
+#ifdef DEBUG
+        printf("\n\n");
+#endif
+
+        return OK;
+        }
+
+
+
+
+/* waits for a DHCPOFFER message from one or more DHCP servers */
+int get_dhcp_offer(int sock){
+        dhcp_packet offer_packet;
+        struct sockaddr_in source;
+        int result=OK;
+        int timeout=1;
+        int responses=0;
+        int x;
+        time_t start_time;
+        time_t current_time;
+
+        time(&start_time);
+
+        /* receive as many responses as we can */
+        for(responses=0,valid_responses=0;;){
+
+                time(&current_time);
+                if((current_time-start_time)>=dhcpoffer_timeout)
+                        break;
+
+#ifdef DEBUG
+                printf("\n\n");
+#endif
+
+                bzero(&source,sizeof(source));
+                bzero(&offer_packet,sizeof(offer_packet));
+
+                result=OK;
+                result=receive_dhcp_packet(&offer_packet,sizeof(offer_packet),sock,dhcpoffer_timeout,&source);
+                
+                if(result!=OK){
+#ifdef DEBUG
+                        printf("Result=ERROR\n");
+#endif
+                        continue;
+                        }
+                else{
+#ifdef DEBUG
+                        printf("Result=OK\n");
+#endif
+                        responses++;
+                        }
+
+#ifdef DEBUG
+                printf("DHCPOFFER from IP address %s\n",inet_ntoa(source.sin_addr));
+                printf("DHCPOFFER XID: %lu (0x%X)\n",ntohl(offer_packet.xid),ntohl(offer_packet.xid));
+#endif
+
+                /* check packet xid to see if its the same as the one we used in the discover packet */
+                if(ntohl(offer_packet.xid)!=packet_xid){
+#ifdef DEBUG
+                        printf("DHCPOFFER XID (%lu) did not match DHCPDISCOVER XID (%lu) - ignoring packet\n",ntohl(offer_packet.xid),packet_xid);
+#endif
+                        continue;
+                        }
+
+                /* check hardware address */
+                result=OK;
+#ifdef DEBUG
+                printf("DHCPOFFER chaddr: ");
+#endif
+                for(x=0;x<ETHERNET_HARDWARE_ADDRESS_LENGTH;x++){
+#ifdef DEBUG
+                        printf("%02X",(unsigned char)offer_packet.chaddr[x]);
+#endif
+                        if(offer_packet.chaddr[x]!=client_hardware_address[x]){
+                                result=ERROR;
+                                }
+                        }
+#ifdef DEBUG
+                printf("\n");
+#endif
+                if(result==ERROR){
+#ifdef DEBUG
+                        printf("DHCPOFFER hardware address did not match our own - ignoring packet\n");
+#endif
+                        continue;
+                        }
+
+#ifdef DEBUG
+                printf("DHCPOFFER ciaddr: %s\n",inet_ntoa(offer_packet.ciaddr));
+                printf("DHCPOFFER yiaddr: %s\n",inet_ntoa(offer_packet.yiaddr));
+                printf("DHCPOFFER siaddr: %s\n",inet_ntoa(offer_packet.siaddr));
+                printf("DHCPOFFER giaddr: %s\n",inet_ntoa(offer_packet.giaddr));
+#endif
+
+                add_dhcp_offer(source.sin_addr,&offer_packet);
+
+                valid_responses++;
+                }
+
+#ifdef DEBUG
+        printf("Total responses seen on the wire: %d\n",responses);
+        printf("Valid responses for this machine: %d\n",valid_responses);
+#endif
+
+        return OK;
+        }
+
+
+
+/* sends a DHCP packet */
+int send_dhcp_packet(void *buffer, int buffer_size, int sock, struct sockaddr_in *dest){
+        struct sockaddr_in myname;
+        int result;
+
+        result=sendto(sock,(char *)buffer,buffer_size,0,(struct sockaddr_in *)dest,sizeof(*dest));
+
+#ifdef DEBUG
+        printf("send_dhcp_packet result: %d\n",result);
+#endif
+
+        if(result<0)
+                return ERROR;
+
+        return OK;
+        }
+
+
+
+/* receives a DHCP packet */
+int receive_dhcp_packet(void *buffer, int buffer_size, int sock, int timeout, struct sockaddr_in *address){
+        struct timeval tv;
+        fd_set readfds;
+        int recv_result;
+        socklen_t address_size;
+        struct sockaddr_in source_address;
+
+
+        /* wait for data to arrive (up time timeout) */
+        tv.tv_sec=timeout;
+        tv.tv_usec=0;
+        FD_ZERO(&readfds);
+        FD_SET(sock,&readfds);
+        select(sock+1,&readfds,NULL,NULL,&tv);
+
+        /* make sure some data has arrived */
+        if(!FD_ISSET(sock,&readfds)){
+#ifdef DEBUG
+                printf("No (more) data recieved\n");
+#endif
+                return ERROR;
+                }
+
+        else{
+
+                /* why do we need to peek first?  i don't know, its a hack.  without it, the source address of the first packet received was
+                   not being interpreted correctly.  sigh... */
+                bzero(&source_address,sizeof(source_address));
+                recv_result=recvfrom(sock,(char *)buffer,buffer_size,MSG_PEEK,(struct sockaddr_in *)&source_address,&address_size);
+#ifdef DEBUG
+                printf("recv_result_1: %d\n",recv_result);
+#endif
+                recv_result=recvfrom(sock,(char *)buffer,buffer_size,0,(struct sockaddr_in *)&source_address,&address_size);
+#ifdef DEBUG
+                printf("recv_result_2: %d\n",recv_result);
+#endif
+
+                if(recv_result==-1){
+#ifdef DEBUG
+                        printf("recvfrom() failed, ");
+                        printf("errno: (%d) -> %s\n",errno,strerror(errno));
+#endif
+                        return ERROR;
+                        }
+                else{
+#ifdef DEBUG
+                        printf("receive_dhcp_packet() result: %d\n",recv_result);
+                        printf("receive_dhcp_packet() source: %s\n",inet_ntoa(source_address.sin_addr));
+#endif
+
+                        memcpy(address,&source_address,sizeof(source_address));
+                        return OK;
+                        }
+                }
+
+        return OK;
+        }
+
+
+
+/* creates a socket for DHCP communication */
+int create_dhcp_socket(void){
+        struct sockaddr_in myname;
+        int sock;
+        int flag=1;
+
+        /* Set up the address we're going to bind to. */
+        bzero(&myname,sizeof(myname));
+        myname.sin_family=AF_INET;
+        myname.sin_port=htons(DHCP_CLIENT_PORT);
+        myname.sin_addr.s_addr=INADDR_ANY;                 /* listen on any address */
+        bzero(&myname.sin_zero,sizeof(myname.sin_zero));
+
+        /* create a socket for DHCP communications */
+        sock=socket(AF_INET,SOCK_DGRAM,IPPROTO_UDP);
+        if(sock<0){
+                printf("Error: Could not create socket!\n");
+                exit(STATE_UNKNOWN);
+                }
+
+#ifdef DEBUG
+        printf("DHCP socket: %d\n",sock);
+#endif
+
+        /* set the reuse address flag so we don't get errors when restarting */
+        flag=1;
+        if(setsockopt(sock,SOL_SOCKET,SO_REUSEADDR,(char *)&flag,sizeof(flag))<0){
+                printf("Error: Could not set reuse address option on DHCP socket!\n");
+                exit(STATE_UNKNOWN);
+                }
+
+        /* set the broadcast option - we need this to listen to DHCP broadcast messages */
+        if(setsockopt(sock,SOL_SOCKET,SO_BROADCAST,(char *)&flag,sizeof flag)<0){
+                printf("Error: Could not set broadcast option on DHCP socket!\n");
+                exit(STATE_UNKNOWN);
+                }
+
+        /* bind the socket */
+        if(bind(sock,(struct sockaddr *)&myname,sizeof(myname))<0){
+                printf("Error: Could not bind to DHCP socket (port %d)!  Check your privileges...\n",DHCP_CLIENT_PORT);
+                exit(STATE_UNKNOWN);
+                }
+
+        return sock;
+        }
+
+
+
+
+
+/* closes DHCP socket */
+int close_dhcp_socket(int sock){
+
+        close(sock);
+
+        return OK;
+        }
+
+
+
+
+/* adds a requested server address to list in memory */
+int add_requested_server(struct in_addr server_address){
+        requested_server *new_server;
+
+        new_server=(requested_server *)malloc(sizeof(requested_server));
+        if(new_server==NULL)
+                return ERROR;
+
+        new_server->server_address=server_address;
+
+        new_server->next=requested_server_list;
+        requested_server_list=new_server;
+
+        requested_servers++;
+
+#ifdef DEBUG
+        printf("Requested server address: %s\n",inet_ntoa(new_server->server_address));
+#endif
+
+        return OK;
+        }
+
+
+
+
+/* adds a DHCP OFFER to list in memory */
+int add_dhcp_offer(struct in_addr source,dhcp_packet *offer_packet){
+        dhcp_offer *new_offer;
+        int x;
+        int y;
+        unsigned option_type;
+        unsigned option_length;
+
+        if(offer_packet==NULL)
+                return ERROR;
+
+        /* process all DHCP options present in the packet */
+        for(x=4;x<MAX_DHCP_OPTIONS_LENGTH;){
+
+                /* end of options (0 is really just a pad, but bail out anyway) */
+                if((int)offer_packet->options[x]==-1 || (int)offer_packet->options[x]==0)
+                        break;
+
+                /* get option type */
+                option_type=offer_packet->options[x++];
+
+                /* get option length */
+                option_length=offer_packet->options[x++];
+
+#ifdef DEBUG
+                printf("Option: %d (0x%02X)\n",option_type,option_length);
+#endif
+
+                /* get option data */
+                if(option_type==DHCP_OPTION_LEASE_TIME)
+                        dhcp_lease_time=ntohl(*((u_int32_t *)&offer_packet->options[x]));
+                if(option_type==DHCP_OPTION_RENEWAL_TIME)
+                        dhcp_renewal_time=ntohl(*((u_int32_t *)&offer_packet->options[x]));
+                if(option_type==DHCP_OPTION_REBINDING_TIME)
+                        dhcp_rebinding_time=ntohl(*((u_int32_t *)&offer_packet->options[x]));
+
+                /* skip option data we're ignoring */
+                else
+                        for(y=0;y<option_length;y++,x++);
+                }
+
+#ifdef DEBUG
+        if(dhcp_lease_time==DHCP_INFINITE_TIME)
+                printf("Lease Time: Infinite\n");
+        else
+                printf("Lease Time: %lu seconds\n",(unsigned long)dhcp_lease_time);
+        if(dhcp_renewal_time==DHCP_INFINITE_TIME)
+                printf("Renewal Time: Infinite\n");
+        else
+                printf("Renewal Time: %lu seconds\n",(unsigned long)dhcp_renewal_time);
+        if(dhcp_rebinding_time==DHCP_INFINITE_TIME)
+                printf("Rebinding Time: Infinite\n");
+        printf("Rebinding Time: %lu seconds\n",(unsigned long)dhcp_rebinding_time);
+#endif
+
+        new_offer=(dhcp_offer *)malloc(sizeof(dhcp_offer));
+
+        if(new_offer==NULL)
+                return ERROR;
+
+
+        new_offer->server_address=source;
+        new_offer->offered_address=offer_packet->yiaddr;
+        new_offer->lease_time=dhcp_lease_time;
+        new_offer->renewal_time=dhcp_renewal_time;
+        new_offer->rebinding_time=dhcp_rebinding_time;
+
+
+#ifdef DEBUG
+        printf("Added offer from server @ %s",inet_ntoa(new_offer->server_address));
+        printf(" of IP address %s\n",inet_ntoa(new_offer->offered_address));
+#endif
+
+        /* add new offer to head of list */
+        new_offer->next=dhcp_offer_list;
+        dhcp_offer_list=new_offer;
+
+        return OK;
+        }
+
+
+
+
+/* frees memory allocated to DHCP OFFER list */
+int free_dhcp_offer_list(void){
+        dhcp_offer *this_offer;
+        dhcp_offer *next_offer;
+
+        for(this_offer=dhcp_offer_list;this_offer!=NULL;this_offer=next_offer){
+                next_offer=this_offer->next;
+                free(this_offer);
+                }
+
+        return OK;
+        }
+
+
+
+
+/* frees memory allocated to requested server list */
+int free_requested_server_list(void){
+        requested_server *this_server;
+        requested_server *next_server;
+
+        for(this_server=requested_server_list;this_server!=NULL;this_server=next_server){
+                next_server=this_server->next;
+                free(this_server);
+                }
+        
+        return OK;
+        }
+
+
+/* gets state and plugin output to return */
+int get_results(void){
+        dhcp_offer *temp_offer;
+        requested_server *temp_server;
+        int result;
+        u_int32_t max_lease_time=0;
+
+        received_requested_address=FALSE;
+
+        /* checks responses from requested servers */
+        requested_responses=0;
+        if(requested_servers>0){
+
+                for(temp_server=requested_server_list;temp_server!=NULL;temp_server=temp_server->next){
+
+                        for(temp_offer=dhcp_offer_list;temp_offer!=NULL;temp_offer=temp_offer->next){
+
+                                /* get max lease time we were offered */
+                                if(temp_offer->lease_time>max_lease_time || temp_offer->lease_time==DHCP_INFINITE_TIME)
+                                        max_lease_time=temp_offer->lease_time;
+                                
+                                /* see if we got the address we requested */
+                                if(!memcmp(&requested_address,&temp_offer->offered_address,sizeof(requested_address)))
+                                        received_requested_address=TRUE;
+
+                                /* see if the servers we wanted a response from talked to us or not */
+                                if(!memcmp(&temp_offer->server_address,&temp_server->server_address,sizeof(temp_server->server_address))){
+#ifdef DEBUG
+                                        printf("DHCP Server Match: Offerer=%s",inet_ntoa(temp_offer->server_address));
+                                        printf(" Requested=%s\n",inet_ntoa(temp_server->server_address));
+#endif                                 
+                                        requested_responses++;
+                                        }
+                                }
+                        }
+
+                }
+
+        /* else check and see if we got our requested address from any server */
+        else{
+
+                for(temp_offer=dhcp_offer_list;temp_offer!=NULL;temp_offer=temp_offer->next){
+
+                        /* get max lease time we were offered */
+                        if(temp_offer->lease_time>max_lease_time || temp_offer->lease_time==DHCP_INFINITE_TIME)
+                                max_lease_time=temp_offer->lease_time;
+                                
+                        /* see if we got the address we requested */
+                        if(!memcmp(&requested_address,&temp_offer->offered_address,sizeof(requested_address)))
+                                received_requested_address=TRUE;
+                        }
+                }
+
+        result=STATE_OK;
+        if(valid_responses==0)
+                result=STATE_CRITICAL;
+        else if(requested_servers>0 && requested_responses==0)
+                result=STATE_CRITICAL;
+        else if(requested_responses<requested_servers)
+                result=STATE_WARNING;
+        else if(request_specific_address==TRUE && received_requested_address==FALSE)
+                result=STATE_WARNING;
+
+
+        printf("DHCP %s: ",(result==STATE_OK)?"ok":"problem");
+
+        /* we didn't receive any DHCPOFFERs */
+        if(dhcp_offer_list==NULL){
+                printf("No DHCPOFFERs were received.\n");
+                return result;
+                }
+
+        printf("Received %d DHCPOFFER(s)",valid_responses);
+
+        if(requested_servers>0)
+                printf(", %s%d of %d requested servers responded",((requested_responses<requested_servers) && requested_responses>0)?"only ":"",requested_responses,requested_servers);
+
+        if(request_specific_address==TRUE)
+                printf(", requested address (%s) was %soffered",inet_ntoa(requested_address),(received_requested_address==TRUE)?"":"not ");
+
+        printf(", max lease time = ");
+        if(max_lease_time==DHCP_INFINITE_TIME)
+                printf("Infinity");
+        else
+                printf("%lu sec",(unsigned long)max_lease_time);
+
+        printf(".\n");
+
+        return result;
+        }
+
+
+
+
+
+
+/* print usage help */
+void print_help(void){
+
+        /*print_revision(PROGNAME,"$Revision$");*/
+
+        printf("Copyright (c) 2001 Ethan Galstad (nagios@nagios.org)\n\n");
+        printf("This plugin tests the availability of DHCP servers on a network.\n\n");
+
+        print_usage();
+
+        printf
+                ("\nOptions:\n"
+                 " -s, --serverip=IPADDRESS\n"
+                 "   IP address of DHCP server that we must hear from\n"
+                 " -r, --requestedip=IPADDRESS\n"
+                 "   IP address that should be offered by at least one DHCP server\n"
+                 " -t, --timeout=INTEGER\n"
+                 "   Seconds to wait for DHCPOFFER before timeout occurs\n"
+                 " -i, --interface=STRING\n"
+                 "   Interface to to use for listening (i.e. eth0)\n"
+                 " -v, --verbose\n"
+                 "   Print extra information (command-line use only)\n"
+                 " -h, --help\n"
+                 "   Print detailed help screen\n"
+                 " -V, --version\n"
+                 "   Print version information\n\n"
+                 );
+
+        /*support();*/
+
+        return;
+        }
+
+
+/* prints usage information */
+void print_usage(void){
+
+        printf("Usage: %s [-s serverip] [-r requestedip] [-t timeout] [-i interface]\n",PROGNAME);
+        printf("       %s --help\n",PROGNAME);
+        printf("       %s --version\n",PROGNAME);
+
+        return;
+        }
+
+
+
+
+/* process command-line arguments */
+int process_arguments(int argc, char **argv){
+        int c;
+
+        if(argc<1)
+                return ERROR;
+
+        c=0;
+        while((c+=(call_getopt(argc-c,&argv[c])))<argc){
+
+                /*
+                if(is_option(argv[c]))
+                        continue;
+                */
+                }
+
+        return validate_arguments();
+        }
+
+
+
+int call_getopt(int argc, char **argv){
+        int c=0;
+        int i=0;
+        struct in_addr ipaddress;
+
+#ifdef HAVE_GETOPT_H
+        int option_index = 0;
+        static struct option long_options[] =
+        { 
+                {"serverip",       required_argument,0,'s'},
+                {"requestedip",    required_argument,0,'r'},
+                {"timeout",        required_argument,0,'t'},
+                {"interface",      required_argument,0,'i'},
+                {"verbose",        no_argument,      0,'v'},
+                {"version",        no_argument,      0,'V'},
+                {"help",           no_argument,      0,'h'},
+                {0,0,0,0}
+        };
+#endif
+
+        while(1){
+#ifdef HAVE_GETOPT_H
+                c=getopt_long(argc,argv,"+hVvt:s:r:t:i:",long_options,&option_index);
+#else
+                c=getopt(argc,argv,"+?hVvt:s:r:t:i:");
+#endif
+
+                i++;
+
+                if(c==-1||c==EOF||c==1)
+                        break;
+
+                switch(c){
+                case 'w':
+                case 'r':
+                case 't':
+                case 'i':
+                        i++;
+                        break;
+                default:
+                        break;
+                        }
+
+                switch(c){
+
+                case 's': /* DHCP server address */
+                        if(inet_aton(optarg,&ipaddress))
+                                add_requested_server(ipaddress);
+                        /*
+                        else
+                                usage("Invalid server IP address\n");
+                        */
+                        break;
+
+                case 'r': /* address we are requested from DHCP servers */
+                        if(inet_aton(optarg,&ipaddress)){
+                                requested_address=ipaddress;
+                                request_specific_address=TRUE;
+                                }
+                        /*
+                        else
+                                usage("Invalid requested IP address\n");
+                        */
+                        break;
+
+                case 't': /* timeout */
+
+                        /*
+                        if(is_intnonneg(optarg))
+                        */
+                        if(atoi(optarg)>0)
+                                dhcpoffer_timeout=atoi(optarg);
+                        /*
+                        else
+                                usage("Time interval must be a nonnegative integer\n");
+                        */
+                        break;
+
+                case 'i': /* interface name */
+
+                        strncpy(network_interface_name,optarg,sizeof(network_interface_name)-1);
+                        network_interface_name[sizeof(network_interface_name)-1]='\x0';
+
+                        break;
+
+                case 'V': /* version */
+
+                        /*print_revision(PROGNAME,"$Revision$");*/
+                        exit(STATE_OK);
+
+                case 'h': /* help */
+
+                        print_help();
+                        exit(STATE_OK);
+
+                case '?': /* help */
+
+                        /*usage("Invalid argument\n");*/
+                        break;
+
+                default:
+                        break;
+                        }
+                }
+
+        return i;
+        }
+
+
+
+int validate_arguments(void){
+
+        return OK;
+        }
+
diff --git a/contrib/check_dlswcircuit.pl b/contrib/check_dlswcircuit.pl
new file mode 100755
index 00000000..f6ef9311
--- /dev/null
+++ b/contrib/check_dlswcircuit.pl
@@ -0,0 +1,221 @@
+#!/usr/bin/perl -w
+#
+# check_dlswcircuit.pl - nagios plugin 
+# 
+# Checks if a Cisco Dlsw circuit is connected.
+#
+#
+# Copyright (C) 2000 Carsten Foss & Christoph Kron
+# 
+# Basically this is an adapted version of Christoph Kron's (ck@zet.net) check_ifoperstatus.pl plugin.
+# most of the thanks should go to him.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+# Arguments : -s <SourceMac> -d <DestMac> -c <READCOMMUNITY> -p <PORT> <HOSTNAME or IP-Addr>
+#               -
+# Source & Dest Mac/Sap arguments must be given in Hex as this example : 40.00.01.37.45.01.ss (Where ss is the sap) 
+#
+# Sample command line : check_dlswcircuit.pl -s 40.00.01.37.45.01.04 -d 40.00.02.37.45.02.04 -c secret 1.2.3.4
+#
+# Sample host.cfg entry :
+#service[Dlsw-xx]=NCP1-NCP2;0;24x7;3;5;1;router-admins;240;24x7;1;1;0;;check_dlswcircuit!-s 40.00.01.37.45.01.04!-d 40.00..01.37.45.02.04!-c secret!1.2.3.4
+# remember to add the service to commands.cfg , something like this:
+# command[check_dlswcircuit]=$USER1$/check_dlswcircuit.pl $ARG1$ $ARG2$ $ARG3$ $ARG4$ $ARG5$
+#
+# Report bugs to: cfo@dmdata.dk
+#
+# 11.03.2000 Version 1.0
+
+use strict;
+
+use Net::SNMP;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+
+my $status;
+my $TIMEOUT = 15;
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my %dlswCircuitStatus = (
+          '1','disconnected',
+        '2','circuitStart',
+        '3','resolvePending',
+        '4','circuitPending',
+        '5','circuitEstablished',
+        '6','connectPending',
+        '7','contactPending',
+        '8','connected',
+        '9','disconnectPending',
+        '10','haltPending',
+        '11','haltPendingNoack',
+        '13','circuitRestart',
+        '14','restartPending');
+
+my $state = "UNKNOWN";
+my $answer = "";
+my $smac = "";
+my $dmac = "";
+my $community = "public";
+my $port = 161;
+#Dlsw Circuit Oid enterprises.9.10.9.1.5.2.1.17.6.0.96.148.47.230.166.4.6.64.0.1.55.69.2.4 = 8
+my $enterpriseOid = "1.3.6.1.4.1";
+my $ciscoDlswCircuitOid = ".9.10.9.1.5.2.1.17.";
+my $unknownOid = "6.";
+my $smacOid = "";
+my $dmacOid = "";
+my $tmpOid = "";
+my @tmparg;
+my $snmpoid;
+my @snmpoids;
+my $hostname;
+my $session;
+my $error;
+my $response;
+my $p = "";
+my $q = "";
+
+sub usage {
+  printf "\nMissing arguments!\n";
+  printf "\n";
+  printf "Perl Check Cisco Dlsw Circuit State plugin for Nagios\n";
+  printf  "checks operational status of specified DLSW Circuit\n";
+  printf "usage: \n";
+  printf "check_dlswcircuit.pl -s <SourceMac> -d <DestMac> -c <READCOMMUNITY> -p <PORT> <HOSTNAME>";
+  printf "\nCopyright (C) 2000 Carsten Foss\n";
+  printf "check_dlswcircuit.pl comes with ABSOLUTELY NO WARRANTY\n";
+  printf "This programm is licensed under the terms of the ";
+  printf "GNU General Public License\n(check source code for details)\n";
+  printf "\n\n";
+  exit $ERRORS{"UNKNOWN"};
+}
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No snmp response from $hostname (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+$status = GetOptions("sourcemac=s",\$smac,"destmac=s",\$dmac,
+                     "community=s",\$community,
+                     "port=i",\$port);
+if ($status == 0)
+{
+        &usage;
+}
+
+#
+#Convert Source Mac & Sap
+#  
+   @tmparg = split(/\./,$smac);
+   #print "-$smac-\n";
+   #print "@tmparg\n";
+   #print "$#tmparg\n";
+   if($#tmparg != 6)
+   {
+     print "SourceMac/Sap format $smac not valid\n";
+     &usage;
+   }
+   while($p = shift @tmparg)
+   {
+     $q = hex($p); 
+     $smacOid = $smacOid.$q;
+     $smacOid = $smacOid.'.';
+   }
+
+   #print "@tmparg1\n";
+   #print "$smacOid\n";
+
+#
+#Convert Dest Mac & Sap
+#  
+   @tmparg = split(/\./,$dmac);
+   #print "-$dmac-\n";
+   #print "@tmparg\n";
+   #print "$#tmparg\n";
+   if($#tmparg != 6)
+   {
+     print "DestMac/Sap format $dmac not valid\n";
+     &usage;
+   }
+
+   while($p = shift @tmparg)
+   {
+     $q = hex($p); 
+     $dmacOid = $dmacOid.$q;
+     $dmacOid = $dmacOid.'.';
+   }
+#  Remove Trailing Dot
+   $dmacOid = substr($dmacOid,0,length($dmacOid)-1);
+   
+
+   #print "@tmparg1\n";
+   #print "$dmacOid\n";
+#Build the Dlsw Oic to use
+   $snmpoid = $enterpriseOid.$ciscoDlswCircuitOid.$unknownOid.$smacOid.$unknownOid.$dmacOid ;
+   #print "$snmpoid\n";
+
+   #shift;
+   $hostname  = shift || &usage;
+
+   ($session, $error) = Net::SNMP->session(
+      -hostname  => $hostname,
+      -community => $community,
+      -port      => $port
+   );
+
+   if (!defined($session)) {
+      $state='UNKNOWN';
+      $answer=$error;
+      print ("$state: $answer");
+      exit $ERRORS{$state};
+   }
+
+   push(@snmpoids,$snmpoid);
+   #push(@snmpoids,$snmpLocIfDescr);
+
+   if (!defined($response = $session->get_request(@snmpoids))) {
+      $answer=$session->error;
+      $session->close;
+      $state = 'CRITICAL';
+      print ("$state: $answer,$community,$smac - $dmac");
+      exit $ERRORS{$state};
+   }
+
+   $answer = sprintf("dlsw circuit %s - %s at host '%s',is %s\n", 
+      $smac,
+        $dmac,
+      $hostname, 
+      $dlswCircuitStatus{$response->{$snmpoid}}
+   );
+
+   $session->close;
+
+   if ( $response->{$snmpoid} == 8 ) {
+      $state = 'OK';
+   }
+   else {
+        $state = 'CRITICAL';
+   }
+
+print ("$state: $answer");
+exit $ERRORS{$state};
diff --git a/contrib/check_dns_random.pl b/contrib/check_dns_random.pl
new file mode 100644
index 00000000..787d4644
--- /dev/null
+++ b/contrib/check_dns_random.pl
@@ -0,0 +1,75 @@
+#!/usr/bin/perl
+# ------------------------------------------------------------------------------
+# File Name:            check_dns_random.pl
+# Author:               Richard Mayhew - South Africa
+# Date:                 2000/01/26
+# Version:              1.0
+# Description:          This script will check to see if dns resolves hosts
+#                       randomly from a list using the check_dns plugin. 
+# Email:                netsaint@splash.co.za
+# ------------------------------------------------------------------------------
+# Copyright 1999 (c) Richard Mayhew
+# Credits go to Ethan Galstad for coding Nagios
+# If any changes are made to this script, please mail me a copy of the
+# changes :)
+# License GPL
+# ------------------------------------------------------------------------------
+# Date          Author          Reason
+# ----          ------          ------
+# 1999/09/26    RM              Creation
+# ------------------------------------------------------------------------------
+
+# -----------------------------------------------------------------[ Require ]--
+require 5.004;
+
+# --------------------------------------------------------------------[ Uses ]--
+use Socket;
+use strict;
+
+# --------------------------------------------------------------[ Enviroment ]--
+$ENV{PATH} = "/bin";
+$ENV{BASH_ENV} = "";
+$|=1;
+
+my $host = shift || &usage;
+
+my $domainfile = "/usr/local/nagios/etc/domains.list";
+my $wc = `/usr/bin/wc -l $domainfile`;
+my $check = "/usr/local/nagios/libexec/check_dns";
+my $x = 0;
+my $srv_file = "";
+my $z = "";
+my $y = "";
+
+open(DOMAIN,"<$domainfile") or die "Error Opening $domainfile File!\n";
+        while (<DOMAIN>) {
+          $srv_file .= $_;
+}
+        close(DOMAIN);
+                my @data = split(/\n/,$srv_file);
+
+chomp $wc;
+$wc =~ s/ //g;
+$wc =~ s/domains//g;
+
+$x = rand $wc;
+($z,$y) = split(/\./,$x);
+
+print `$check $data[$z] $host`;
+
+
+
+sub usage
+{
+        print "Minimum arguments not supplied!\n";
+        print "\n";
+        print "Perl Check Random DNS plugin for Nagios\n";
+        print "Copyright (c) 2000 Richard Mayhew\n";
+        print "\n";
+        print "Usage: check_dns_random.pl <host>\n";
+        print "\n";
+        print "<host> = DNS server you would like to query.\n";
+        exit -1;
+
+}
+
diff --git a/contrib/check_email_loop.pl b/contrib/check_email_loop.pl
new file mode 100644
index 00000000..733406da
--- /dev/null
+++ b/contrib/check_email_loop.pl
@@ -0,0 +1,268 @@
+#!/usr/bin/perl 
+#
+# (c)2000 Benjamin Schmid, blueshift@gmx.net (emergency use only ;-)
+# Copyleft by GNU GPL
+#
+#
+# check_email_loop Nagios Plugin
+#
+# This script sends a mail with a specific id in the subject via
+# an given smtp-server to a given email-adress. When the script
+# is run again, it checks for this Email (with its unique id) on
+# a given pop3 account and send another mail.
+# 
+#
+# Example: check_email_loop.pl -poph=mypop -popu=user -pa=password
+#          -smtph=mailer -from=returnadress@yoursite.com
+#          -to=remaileradress@friend.com -pendc=2 -lostc=0
+#
+# This example will send eacht time this check is executed a new
+# mail to remaileradress@friend.com using the SMTP-Host mailer.
+# Then it looks for any back-forwarded mails in the POP3 host
+# mypop. In this Configuration CRITICAL state will be reached if  
+# more than 2 Mails are pending (meaning that they did not came 
+# back till now) or if a mails got lost (meaning a mail, that was
+# send later came back prior to another mail).
+# 
+
+use Net::POP3;
+use Net::SMTP;
+use strict;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+# ----------------------------------------
+
+my $TIMEOUT = 120;
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my $state = "UNKNOWN";
+my ($sender,$receiver, $pophost, $popuser, $poppasswd, $smtphost);
+my ($poptimeout,$smtptimeout,$pinginterval)=(60,60,5);
+my ($lostwarn, $lostcrit,$pendwarn, $pendcrit);
+
+# Internal Vars
+my ($pop,$msgcount,@msglines,$statinfo,@messageids,$newestid);
+my ($matchcount,$statfile) = (0,"check_email_loop.stat");
+
+# Subs declaration
+sub usage;
+sub messagematchs;
+sub nsexit;
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: $0 Time-Out $TIMEOUT s \n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+# Evaluate Command Line Parameters
+my $status = GetOptions(
+                        "from=s",\$sender,
+                        "to=s",\$receiver,
+                        "pophost=s",\$pophost,
+                        "popuser=s",\$popuser,
+                        "passwd=s",\$poppasswd,
+                        "poptimeout=i",\$poptimeout,
+                        "smtphost=s",\$smtphost,
+                        "smtptimeout=i",\$smtptimeout,
+                        "statfile=s",\$statfile,
+                        "interval=i",\$pinginterval,
+                        "lostwarr=i",\$lostwarn,
+                        "lostcrit=i",\$lostcrit,
+                        "pendwarn=i",\$pendwarn,
+                        "pendcrit=i",\$pendcrit,
+                        );
+usage() if ($status == 0 || ! ($pophost && $popuser && $poppasswd &&
+        $smtphost && $receiver && $sender ));
+
+# Try to read the ids of the last send emails out of statfile
+if (open STATF, "$statfile") {
+  @messageids = <STATF>;
+  chomp @messageids;
+  close STATF;
+}
+
+# Try to open statfile for writing 
+if (!open STATF, ">$statfile") {
+  nsexit("Failed to open mail-ID database $statfile for writing",'CRITICAL');
+}
+
+# Ok - check if it's time to release another mail
+
+# ...
+
+# creating new serial id
+my $serial = time();
+$serial = "ID#" . $serial . "#$$";
+
+# sending new ping email
+my $smtp = Net::SMTP->new($smtphost,Timeout=>$smtptimeout) 
+  || nsexit("SMTP connect timeout ($smtptimeout s)",'CRITICAL');
+($smtp->mail($sender) &&
+ $smtp->to($receiver) &&
+ $smtp->data() &&
+ $smtp->datasend("To: $receiver\nSubject: E-Mail Ping [$serial]\n\n".
+                 "This is a automatically sended E-Mail.\n".
+                 "It ist not intended for human reader.\n\n".
+                 "Serial No: $serial\n") &&
+ $smtp->dataend() &&
+ $smtp->quit
+ ) || nsexit("Error delivering message",'CRITICAL');
+
+# no the interessting part: let's if they are receiving ;-)
+
+$pop = Net::POP3->new( $pophost, 
+                 Timeout=>$poptimeout) 
+       || nsexit("POP3 connect timeout (>$poptimeout s, host: $pophost)",'CRITICAL');
+
+$msgcount=$pop->login($popuser,$poppasswd);
+
+$statinfo="$msgcount mails on POP3";
+
+nsexit("POP3 login failed (user:$popuser)",'CRITICAL') if (!defined($msgcount));
+
+# Count messages, that we are looking 4:
+while ($msgcount > 0) {
+  @msglines = @{$pop->get($msgcount)};
+
+  for (my $i=0; $i < scalar @messageids; $i++) {
+    if (messagematchsid(\@msglines,$messageids[$i])) { 
+      $matchcount++;
+      # newest received mail than the others, ok remeber id.
+      $newestid = $messageids[$i] if ($messageids[$i] > $newestid || !defined $newestid);
+      $pop->delete($msgcount);  # remove E-Mail from POP3 server
+      splice @messageids, $i, 1;# remove id from List
+      last;                     # stop looking in list
+    }
+  } 
+
+  $msgcount--;
+}
+
+$pop->quit();  # necessary for pop3 deletion!
+
+# traverse through the message list and mark the lost mails
+# that mean mails that are older than the last received mail.
+if (defined $newestid) {
+  $newestid =~ /\#(\d+)\#/;
+  $newestid = $1;
+  for (my $i=0; $i < scalar @messageids; $i++) {
+    $messageids[$i] =~ /\#(\d+)\#/;
+    my $akid = $1;
+    if ($akid < $newestid) {
+      $messageids[$i] =~ s/^ID/LI/; # mark lost
+    }
+  }
+}
+
+# Write list to id-Database
+foreach my $id (@messageids) {
+  print STATF  "$id\n";
+}
+print STATF "$serial\n";     # remember send mail of this session
+close STATF;
+
+# ok - count lost and pending mails;
+my @tmp = grep /^ID/, @messageids;
+my $pendingm = scalar @tmp;
+@tmp = grep /^LI/, @messageids;
+my $lostm = scalar @tmp; 
+
+# Evaluate the Warnin/Crit-Levels
+if (defined $pendwarn && $pendingm > $pendwarn) { $state = 'WARNING'; }
+if (defined $lostwarn && $lostm > $lostwarn) { $state = 'WARNING'; }
+if (defined $pendcrit && $pendingm > $pendcrit) { $state = 'CRITICAL'; }
+if (defined $lostcrit && $lostm > $lostcrit) { $state = 'CRITICAL'; }
+
+if ((defined $pendwarn || defined $pendcrit || defined $lostwarn 
+     || defined $lostcrit) && ($state eq 'UNKNOWN')) {$state='OK';}
+
+
+# Append Status info
+$statinfo = $statinfo . ", $matchcount mail(s) came back,".
+            " $pendingm pending, $lostm lost.";
+
+# Exit in a Nagios-compliant way
+nsexit($statinfo);
+
+# ----------------------------------------------------------------------
+
+sub usage {
+  print "check_email_loop 1.0 Nagios Plugin - Real check of a E-Mail system\n";
+  print "=" x 75,"\nERROR: Missing or wrong arguments!\n","=" x 75,"\n";
+  print "This script sends a mail with a specific id in the subject via an given\n";
+  print "smtp-server to a given email-adress. When the script is run again, it checks\n";
+  print "for this Email (with its unique id) on a given pop3 account and sends \n";
+  print "another mail.\n";
+  print "\nThe following options are available:\n";
+  print "   -from=text         email adress of send (for mail returnr on errors)\n";
+  print "   -to=text           email adress to which the mails should send to\n";
+  print "   -pophost=text      IP or name of the POP3-host to be checked\n";
+  print "   -popuser=text      Username of the POP3-account\n";
+  print "   -passwd=text       Password for the POP3-user\n";
+  print "   -poptimeout=num    Timeout in seconds for the POP3-server\n";
+  print "   -smtphost=text     IP oder name of the SMTP host\n";
+  print "   -smtptimeout=num   Timeout in seconds for the SMTP-server\n";
+  print "   -statfile=text     File to save ids of messages ($statfile)\n";
+#  print "   -interval=num      Time (in minutes) that must pass by before sending\n"
+#  print "                      another Ping-mail (gibe a new try);\n"; 
+  print "   -lostwarn=num      WARNING-state if more than num lost emails\n";
+  print "   -lostcrit=num      CRITICAL \n";
+  print "   -pendwarn=num      WARNING-state if more than num pending emails\n";
+  print "   -pendcrit=num      CRITICAL \n";
+  print " Options may abbreviated!\n";
+  print " LOST mails are mails, being sent before the last mail arrived back.\n";
+  print " PENDING mails are those, which are not. (supposed to be on the way)\n";
+  print "\nExample: \n";
+  print " $0 -poph=host -pa=pw -popu=popts -smtph=host -from=root\@me.com\n ";
+  print "      -to=remailer\@testxy.com -lostc=0 -pendc=2\n";
+  print "\nCopyleft 19.10.2000, Benjamin Schmid\n";
+  print "This script comes with ABSOLUTELY NO WARRANTY\n";
+  print "This programm is licensed under the terms of the ";
+  print "GNU General Public License\n\n";
+  exit $ERRORS{"UNKNOWN"};
+}
+
+# ---------------------------------------------------------------------
+
+sub nsexit {
+  my ($msg,$code) = @_;
+  $code=$state if (!defined $code);
+  print "$code: $msg\n" if (defined $msg);
+  exit $ERRORS{$code};
+}
+
+# ---------------------------------------------------------------------
+
+sub messagematchsid {
+  my ($mailref,$id) = (@_);
+  my (@tmp);
+  my $match = 0;
+ 
+  # ID
+  $id =~ s/^LI/ID/;    # evtl. remove lost mail mark
+  @tmp = grep /Subject: E-Mail Ping \[/, @$mailref;
+  chomp @tmp;
+  if (($tmp[0] =~ /$id/)) 
+    { $match = 1; }
+
+  # Sender:
+#  @tmp = grep /^From:\s+/, @$mailref;
+#  if (@tmp && $sender ne "") 
+#    { $match = $match && ($tmp[0]=~/$sender/); }
+
+  # Receiver:
+#  @tmp = grep /^To: /, @$mailref;
+#  if (@tmp && $receiver ne "") 
+#    { $match = $match && ($tmp[0]=~/$receiver/); }
+
+  return $match;
+}
+
+# ---------------------------------------------------------------------
diff --git a/contrib/check_fping_in.c b/contrib/check_fping_in.c
new file mode 100644
index 00000000..50fd5eea
--- /dev/null
+++ b/contrib/check_fping_in.c
@@ -0,0 +1,430 @@
+/******************************************************************************
+*
+* CHECK_INET_FPING.C
+*
+* Program: Fping plugin for Nagios
+* License: GPL
+* Copyright (c) 1999 Didi Rieder (adrieder@sbox.tu-graz.ac.at)
+* $Id$
+*
+* Modifications:
+*
+* 08-24-1999 Didi Rieder (adrieder@sbox.tu-graz.ac.at)
+*            Intial Coding
+* 09-11-1999 Karl DeBisschop (kdebiss@alum.mit.edu)
+*            Change to spopen
+*            Fix so that state unknown is returned by default
+*            (formerly would give state ok if no fping specified)
+*            Add server_name to output
+*            Reformat to 80-character standard screen
+* 11-18-1999 Karl DeBisschop (kdebiss@alum.mit.edu)
+*            set STATE_WARNING of stderr written or nonzero status returned
+* 09-29-2000 Matthew Grant (matthewg@plain.co.nz)
+*            changes for monitoring multiple hosts for checking Internet
+*            reachibility
+*
+* Description:
+*
+* This plugin will use the /bin/fping command (from nagios) to ping
+* the specified host for a fast check if the host is alive. Note that
+* it is necessary to set the suid flag on fping.
+******************************************************************************/
+
+#include "config.h"
+#include "common.h"
+#include "popen.h"
+#include "utils.h"
+
+#define PROGNAME "check_fping"
+#define PACKET_COUNT 15
+#define PACKET_SIZE 56
+#define CRITICAL_COUNT 2
+#define WARNING_COUNT 1
+#define UNKNOWN_PACKET_LOSS 200 /* 200% */
+#define UNKNOWN_TRIP_TIME -1.0 /* -1 seconds */
+
+#define STRSZ 100
+
+int textscan(char *buf);
+int process_arguments(int, char **);
+int get_threshold (char *arg, char *rv[2]);
+void print_usage(void);
+void print_help(void);
+
+char *server_names=NULL;
+char *name="INTERNET";
+int cthresh=CRITICAL_COUNT;
+int wthresh=WARNING_COUNT;
+int nnames=0;
+int tpl=UNKNOWN_PACKET_LOSS;
+double trta=UNKNOWN_TRIP_TIME;
+int packet_size=PACKET_SIZE;
+int packet_count=PACKET_COUNT;
+int verbose=FALSE;
+int fail = 0;
+int not_found = 0;
+int rta_fail = 0;
+int pl_fail = 0;
+int unreachable = 0;
+
+int main(int argc, char **argv){
+        int result;
+        int status=STATE_UNKNOWN;
+        char *servers=NULL;
+        char *command_line=NULL;
+        char *input_buffer=NULL;
+        char *pl_buffer=NULL; 
+        char *rta_buffer=NULL; 
+        input_buffer=malloc(MAX_INPUT_BUFFER);
+        rta_buffer = malloc(80);
+        pl_buffer = malloc(80);
+        memset(rta_buffer, 0, 80);
+        memset(pl_buffer, 0, 80);
+        
+        if(process_arguments(argc,argv)==ERROR)
+                usage("Could not parse arguments\n");
+
+        servers=strscpy(servers,server_names);
+
+        /* compose the command */
+        command_line=ssprintf
+                (command_line,"%s -b %d -c %d %s",
+                 PATH_TO_FPING,
+                 packet_size,
+                 packet_count,
+                 servers);
+
+        if (verbose) printf("%s\n",command_line);
+
+        /* run the command */
+        child_process=spopen(command_line);
+        if(child_process==NULL){
+                printf("Unable to open pipe: %s\n",command_line);
+                return STATE_UNKNOWN;
+        }
+
+        child_stderr=fdopen(child_stderr_array[fileno(child_process)],"r");
+        if(child_stderr==NULL){
+                printf("Could not open stderr for %s\n",command_line);
+        }
+
+        while (fgets(input_buffer,MAX_INPUT_BUFFER-1,child_process)) {
+                if (verbose) printf("%s",input_buffer);
+                result = textscan(input_buffer);
+                status = max(status,result);
+        }
+
+        while(fgets(input_buffer,MAX_INPUT_BUFFER-1,child_stderr)) {
+                if (verbose) printf("%s",input_buffer);
+                result = textscan(input_buffer);
+                status = max(status,result);
+        }
+        
+        (void)fclose(child_stderr);
+
+        /* close the pipe */
+        if(spclose(child_process))
+                status=max(status,STATE_WARNING);
+
+        /* Analyse fail count and produce results */
+        if (fail >= wthresh) {
+                status = max(status, STATE_WARNING);
+        }
+
+        if (fail >= cthresh) {
+                status = max(status, STATE_CRITICAL);
+        }
+        
+        if( tpl != UNKNOWN_PACKET_LOSS ) {
+                snprintf(pl_buffer, 80, ", %d PL", pl_fail);
+        }
+
+        if( trta != UNKNOWN_TRIP_TIME ) {
+                snprintf(rta_buffer, 80, ", %d RTA", rta_fail);
+
+        }
+        
+        printf("FPING %s - %s, %d of %d fail, %d NF, %d UR%s%s\n",
+                        state_text(status),
+                        (name != NULL ? name : server_names),
+                        fail,
+                        nnames,
+                        not_found,
+                        unreachable,
+                        pl_buffer,
+                        rta_buffer);
+        
+        return status;
+}
+
+
+
+/* analyse fping output - each event resulting in an increment of fail
+ * must be mutually exclusive. packet loss and round trip time analysed 
+ * together, both at once just results in one increment of fail
+ */
+int textscan(char *buf)
+{
+        char *rtastr=NULL;
+        char *losstr=NULL;
+        double loss;
+        double rta;
+        int status=STATE_OK;
+        
+        if (strstr(buf,"not found")) {
+                fail++;
+                not_found++;
+        } else if(strstr(buf,"xmt/rcv/%loss") 
+                && strstr(buf,"min/avg/max")) {
+                losstr = strstr(buf,"=");
+                losstr = 1+strstr(losstr,"/");
+                losstr = 1+strstr(losstr,"/");
+                rtastr = strstr(buf,"min/avg/max");
+                rtastr = strstr(rtastr,"=");
+                rtastr = 1+index(rtastr,'/');
+                loss = strtod(losstr,NULL);
+                rta = strtod(rtastr,NULL);
+                /* Increment fail counter
+                 */
+                if (tpl!=UNKNOWN_PACKET_LOSS && loss>tpl) {
+                        fail++;
+                }
+                else if (trta!=UNKNOWN_TRIP_TIME && rta>trta) {
+                        fail++;
+                }
+                else if (loss >= 100) {
+                        fail++;
+                }
+                /* Increment other counters 
+                 */
+                if (trta!=UNKNOWN_TRIP_TIME && rta>trta) 
+                        rta_fail++;
+                if (tpl!=UNKNOWN_PACKET_LOSS && loss>tpl) 
+                        pl_fail++;
+                if (loss >= 100) 
+                        unreachable++;
+        } else if(strstr(buf,"xmt/rcv/%loss") ) {
+                losstr = strstr(buf,"=");
+                losstr = 1+strstr(losstr,"/");
+                losstr = 1+strstr(losstr,"/");
+                loss = strtod(losstr,NULL);
+                /* Increment fail counter
+                 */
+                if (tpl!=UNKNOWN_PACKET_LOSS && loss>tpl) {
+                        fail++;
+                }
+                else if (loss >= 100) {
+                        fail++;
+                }
+                /* Increment other counters 
+                 */
+                if (tpl!=UNKNOWN_PACKET_LOSS && loss>tpl)
+                        pl_fail++;
+                if (loss >= 100) 
+                        unreachable++;
+        }
+        
+        return status;
+}
+
+
+
+
+/* process command-line arguments */
+int process_arguments(int argc, char **argv)
+{
+        int c;
+
+#ifdef HAVE_GETOPT_H
+        int option_index = 0;
+        static struct option long_options[] =
+        { 
+                {"hostname"           ,required_argument,0,'H'},
+                {"critical"           ,required_argument,0,'c'},
+                {"warning"            ,required_argument,0,'w'},
+                {"bytes"              ,required_argument,0,'b'},
+                {"number"             ,required_argument,0,'n'},
+                {"pl-threshold"       ,required_argument,0,'p'},
+                {"rta-threshold"      ,required_argument,0,'r'},
+                {"name"               ,required_argument,0,'N'},
+                {"verbose"            ,no_argument,      0,'v'},
+                {"version"            ,no_argument,      0,'V'},
+                {"help"               ,no_argument,      0,'h'},
+                {0,0,0,0}
+        };
+#else
+
+        if(argc<2) return ERROR;
+        
+        if (!is_option(argv[1])){
+                server_names=argv[1];
+                argv[1]=argv[0];
+                argv=&argv[1];
+                argc--;
+        }
+#endif
+        
+        while (1){
+#ifdef HAVE_GETOPT_H
+                c = getopt_long(argc,argv,"+hVvH:c:w:b:n:N:p:r:",long_options,&option_index);
+#else
+                c = getopt(argc,argv,"+hVvH:c:w:b:n:N:p:r:");
+#endif
+
+                if (c==-1||c==EOF||c==1)
+                        break;
+
+                switch (c)
+                        {
+                        case '?': /* print short usage statement if args not parsable */
+                                printf("%s: Unknown argument: %s\n\n",my_basename(argv[0]),optarg);
+                                print_usage();
+                                exit(STATE_UNKNOWN);
+                        case 'h': /* help */
+                                print_help();
+                                exit(STATE_OK);
+                        case 'V': /* version */
+                                print_revision(my_basename(argv[0]),"$Revision$");
+                                exit(STATE_OK);
+                        case 'v': /* verbose mode */
+                                verbose=TRUE;
+                                break;
+                        case 'H': /* hostname */
+                                if(is_host(optarg)==FALSE){
+                                        printf("Invalid host name/address\n\n");
+                                        print_usage();
+                                        exit(STATE_UNKNOWN);
+                                }
+                                if (server_names != NULL) 
+                                        server_names=strscat(server_names," ");
+                                server_names=strscat(server_names,optarg);
+                                nnames++;
+                                break;
+                        case 'c':
+                                if (is_intpos(optarg))
+                                        cthresh = atoi(optarg);
+                                else
+                                        usage("Critical threshold must be a positive integer"); 
+                                break;
+                        case 'w':
+                                if (is_intpos(optarg))
+                                        wthresh = atoi(optarg);
+                                else
+                                        usage("Warning threshold must be a postive integer");
+                                break;
+                        case 'r':
+                                if (is_intpos(optarg)) {
+                                        trta=strtod(optarg,NULL);
+                                } 
+                                else {
+                                        usage("RTA threshold must be a positive integer");
+                                }
+                                break;
+                        case 'p':
+                                if (is_intpos(optarg)) {
+                                        tpl=strtod(optarg,NULL);
+                                } 
+                                else {
+                                        usage("RTA threshold must be a positive integer");
+                                }
+                                break;
+                        case 'b': /* bytes per packet */
+                                if (is_intpos(optarg))
+                                        packet_size=atoi(optarg);
+                                else
+                                        usage("Packet size must be a positive integer");
+                                break;
+                        case 'N': /* Name of service */
+                                name = optarg;
+                                break;
+                        case 'n': /* number of packets */
+                                if (is_intpos(optarg))
+                                        packet_count=atoi(optarg);
+                                else
+                                        usage("Packet count must be a positive integer");
+                                break;
+                        }
+        }
+
+        while (optind < argc) {
+                if(is_host(argv[optind])==FALSE) {
+                        printf("Invalid host name/address\n\n");
+                        print_usage();
+                        exit(STATE_UNKNOWN);
+                }
+                if (server_names != NULL)
+                        server_names=strscat(server_names," ");
+                server_names=strscat(server_names,argv[optind]);
+                nnames++;
+                optind++;
+        }
+        
+        if (server_names==NULL || nnames < 2)
+                usage("At least 2 hostnames must be supplied\n\n");
+        
+        if (cthresh < 2) 
+                usage("Critical threshold must be at least 2");
+        if (cthresh > nnames)
+                usage("Critical threshold cannot be greater than number of hosts tested");
+        if (wthresh < 1)
+                usage("Warning threshold must be at least 1");
+        if (wthresh > nnames)
+                usage("Warning threshold cannot be greater than number of hosts tested");
+        if(wthresh >= cthresh)
+                usage("Warning threshold must be less than the critical threshold"); 
+        
+        return OK;
+}
+
+
+void print_usage(void)
+{
+        printf("Usage: %s <host_address> <host_address> [<host_address>] ...\n",PROGNAME);
+}
+
+
+
+
+
+void print_help(void)
+{
+
+        print_revision(PROGNAME,"$Revision$");
+
+        printf
+                ("Copyright (c) 1999 Didi Rieder (adrieder@sbox.tu-graz.ac.at)\n"
+                 "          (c) 2000 Matthew Grant (matthewg@plain.co.nz)\n"
+                 "This plugin will use the /bin/fping command (from saint) to ping the\n"
+                 "specified hosts for a fast check to see if the Internet is still \n"
+                 "reachable, and the results of the testing aggregated. Note that it\n"
+                 "is necessary to set the suid flag on fping.\n\n");
+
+        print_usage();
+
+  printf
+                ("\nOptions:\n"
+                 "-b, --bytes=INTEGER\n"
+                 "   Size of ICMP packet (default: %d)\n"
+                 "-c, --critical=INTEGER (default: %d)\n"
+                 "   critical threshold failure count\n"
+                 "-n, --number=INTEGER\n"
+                 "   Number of ICMP packets to send (default: %d)\n"
+                 "-H, --hostname=HOST\n"
+                 "   Name or IP Address of host to ping (IP Address bypasses name lookup,\n"
+                 "   reducing system load)\n"
+                 "-h, --help\n"
+                 "   Print this help screen\n"
+                 "-N, --name\n"
+                 "   Service name to print in results, defaults to INTERNET\n"
+                 "-p, --pl-threshold\n"
+                 "   Packet loss threshold - specify to turn on packet loss testing\n"
+                 "-r, --rta-threshold\n"
+                 "   Round trip average threshold - specify to turn on RTA testing\n"
+                 "-V, --version\n"
+                 "   Print version information\n"
+                 "-v, --verbose\n"
+                 "   Show details for command-line debugging (do not use with nagios server)\n"
+                 "-w, --warning=INTEGER (default: %d)\n"
+                 "   warning threshold failure count\n",
+                 PACKET_SIZE, CRITICAL_COUNT, PACKET_COUNT, WARNING_COUNT);
+}
diff --git a/contrib/check_ftpget.pl b/contrib/check_ftpget.pl
new file mode 100755
index 00000000..de7e8242
--- /dev/null
+++ b/contrib/check_ftpget.pl
@@ -0,0 +1,48 @@
+#!/usr/bin/perl -w
+## Written 12/5/00 Jeremy Hanmer 
+# $Id$
+
+use strict;
+use Net::FTP;
+use Getopt::Std;
+
+use vars qw($opt_H $opt_u $opt_p $opt_f);
+getopts("H:u:p:f:");
+
+my $host = $opt_H || 
+    die "usage: check_ftp.pl -h host [<-u user> <-p pass> <-f file>]\n";
+
+my $username = $opt_u || 'anonymous';
+my $pass = $opt_p || "$ENV{'LOGNAME'}\@$ENV{'HOSTNAME'}" ;
+
+my $file = $opt_f;
+
+my $status = 0;
+my $problem;
+my $output = "ftp ok";
+
+my $ftp = Net::FTP->new("$host") ||
+    &crit("connect");
+
+$ftp->login("$username", "$pass") ||
+    &crit("login");
+
+$ftp->get($file) ||
+    &crit("get") if $file;
+
+sub crit() 
+{
+    $problem = $_[0];
+    $status = 2;
+    if ( $problem eq 'connect' ) {
+        $output = "can't connect";
+    } elsif ( $problem eq 'login' ) {
+        $output = "can't log in";
+    } elsif ( $problem eq 'get' ) {
+        $output = "cant get $file";
+    }
+}
+
+print "$output\n";
+exit $status;
+
diff --git a/contrib/check_ifoperstatus.pl b/contrib/check_ifoperstatus.pl
new file mode 100644
index 00000000..3f21cddd
--- /dev/null
+++ b/contrib/check_ifoperstatus.pl
@@ -0,0 +1,145 @@
+#!/usr/bin/perl -w
+#
+# check_ifoperstatus.pl - nagios plugin 
+# 
+#
+#
+#
+# Copyright (C) 2000 Christoph Kron
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+#
+# Report bugs to: ck@zet.net
+#
+# 11.01.2000 Version 1.0
+
+use strict;
+
+use Net::SNMP;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+
+my $status;
+my $TIMEOUT = 15;
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my %ifOperStatus =      ('1','up',
+                         '2','down',
+                         '3','testing',
+                         '4','unknown',
+                         '5','dormant',
+                         '6','notPresent');
+
+my $state = "UNKNOWN";
+my $answer = "";
+my $snmpkey = 1;
+my $community = "public";
+my $port = 161;
+my @snmpoids;
+my $snmpIfOperStatus;
+my $snmpLocIfDescr;
+my $hostname;
+my $session;
+my $error;
+my $response;
+
+
+sub usage {
+  printf "\nMissing arguments!\n";
+  printf "\n";
+  printf "Perl Check IfOperStatus plugin for Nagios\n";
+  printf  "checks operational status of specified interface\n";
+  printf "usage: \n";
+  printf "ifoperstatus.pl -k <IF_KEY> -c <READCOMMUNITY> -p <PORT> <HOSTNAME>";
+  printf "\nCopyright (C) 2000 Christoph Kron\n";
+  printf "check_ifoperstatus.pl comes with ABSOLUTELY NO WARRANTY\n";
+  printf "This programm is licensed under the terms of the ";
+  printf "GNU General Public License\n(check source code for details)\n";
+  printf "\n\n";
+  exit $ERRORS{"UNKNOWN"};
+}
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No snmp response from $hostname (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+$status = GetOptions("key=i",\$snmpkey,
+                     "community=s",\$community,
+                     "port=i",\$port);
+if ($status == 0)
+{
+        &usage;
+}
+  
+   #shift;
+   $hostname  = shift || &usage;
+
+   ($session, $error) = Net::SNMP->session(
+      -hostname  => $hostname,
+      -community => $community,
+      -port      => $port
+   );
+
+   if (!defined($session)) {
+      $state='UNKNOWN';
+      $answer=$error;
+      print ("$state: $answer");
+      exit $ERRORS{$state};
+   }
+
+   $snmpIfOperStatus = '1.3.6.1.2.1.2.2.1.8' . "." . $snmpkey;
+   $snmpLocIfDescr = '1.3.6.1.4.1.9.2.2.1.1.28' . "." . $snmpkey;
+
+
+   push(@snmpoids,$snmpIfOperStatus);
+   push(@snmpoids,$snmpLocIfDescr);
+
+   if (!defined($response = $session->get_request(@snmpoids))) {
+      $answer=$session->error;
+      $session->close;
+      $state = 'CRITICAL';
+      print ("$state: $answer,$community,$snmpkey");
+      exit $ERRORS{$state};
+   }
+
+   $answer = sprintf("host '%s',%s(%s) is %s\n", 
+      $hostname, 
+      $response->{$snmpLocIfDescr},
+      $snmpkey, 
+      $ifOperStatus{$response->{$snmpIfOperStatus}}
+   );
+
+   $session->close;
+
+   if ( $response->{$snmpIfOperStatus} == 1 ) {
+      $state = 'OK';
+   }
+   else {
+        $state = 'CRITICAL';
+   }
+
+print ("$state: $answer");
+exit $ERRORS{$state};
+
diff --git a/contrib/check_ifstatus.pl b/contrib/check_ifstatus.pl
new file mode 100644
index 00000000..a7ab39ec
--- /dev/null
+++ b/contrib/check_ifstatus.pl
@@ -0,0 +1,178 @@
+#!/usr/bin/perl -w
+#
+# check_ifstatus.pl - nagios plugin 
+# 
+#
+# Copyright (C) 2000 Christoph Kron
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+#
+# Report bugs to: ck@zet.net
+#
+# 11.01.2000 Version 1.0
+
+use strict;
+
+use Net::SNMP;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+
+my $status;
+my $TIMEOUT = 1500;
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my %ifOperStatus =      ('1','up',
+                         '2','down',
+                         '3','testing',
+                         '4','unknown',
+                         '5','dormant',
+                         '6','notPresent');
+
+my $state = "UNKNOWN";
+my $answer = "";
+my $snmpkey;
+my $snmpoid;
+my $key;
+my $community = "public";
+my $port = 161;
+my @snmpoids;
+my $snmpIfAdminStatus = '1.3.6.1.2.1.2.2.1.7';
+my $snmpIfDescr = '1.3.6.1.2.1.2.2.1.2';
+my $snmpIfOperStatus = '1.3.6.1.2.1.2.2.1.8';
+my $snmpLocIfDescr = '1.3.6.1.4.1.9.2.2.1.1.28';
+my $hostname;
+my $session;
+my $error;
+my $response;
+my %ifStatus;
+my $ifup =0 ;
+my $ifdown =0;
+my $ifdormant = 0;
+my $ifmessage;
+
+sub usage {
+  printf "\nMissing arguments!\n";
+  printf "\n";
+  printf "Perl Check IfStatus plugin for Nagios\n";
+  printf "monitors operational status of each interface\n";
+  printf "usage: \n";
+  printf "check_ifstatus.pl -c <READCOMMUNITY> -p <PORT> <HOSTNAME>\n";
+  printf "Copyright (C) 2000 Christoph Kron\n";
+  printf "check_ifstatus.pl comes with ABSOLUTELY NO WARRANTY\n";
+  printf "This programm is licensed under the terms of the ";
+  printf "GNU General Public License\n(check source code for details)\n";
+  printf "\n\n";
+  exit $ERRORS{"UNKNOWN"};
+}
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No snmp response from $hostname (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+$status = GetOptions("community=s",\$community,
+                     "port=i",\$port);
+if ($status == 0)
+{
+        &usage;
+}
+  
+   #shift;
+   $hostname  = shift || &usage;
+
+
+
+   push(@snmpoids,$snmpIfOperStatus);
+   push(@snmpoids,$snmpLocIfDescr);
+   push(@snmpoids,$snmpIfAdminStatus);
+   push(@snmpoids,$snmpIfDescr);
+
+foreach $snmpoid (@snmpoids) {
+
+   ($session, $error) = Net::SNMP->session(
+      -hostname  => $hostname,
+      -community => $community,
+      -port      => $port
+   );
+
+   if (!defined($session)) {
+      $state='UNKNOWN';
+      $answer=$error;
+      print ("$state: $answer");
+      exit $ERRORS{$state};
+   }
+
+   if (!defined($response = $session->get_table($snmpoid))) {
+      $answer=$session->error;
+      $session->close;
+      $state = 'CRITICAL';
+      print ("$state: $answer,$community,$snmpkey");
+      exit $ERRORS{$state};
+   }
+
+   foreach $snmpkey (keys %{$response}) {
+      $snmpkey =~ /.*\.(\d+)$/;
+      $key = $1;
+      $ifStatus{$key}{$snmpoid} = $response->{$snmpkey};
+   }
+   $session->close;
+}
+
+   foreach $key (keys %ifStatus) {
+      # check only if interface is administratively up
+      if ($ifStatus{$key}{$snmpIfAdminStatus} == 1 ) {
+         if ($ifStatus{$key}{$snmpIfOperStatus} == 1 ) { $ifup++ ;}
+         if ($ifStatus{$key}{$snmpIfOperStatus} == 2 ) {
+             $ifdown++ ;
+             $ifmessage .= sprintf("%s: down -> %s<BR>",
+                                 $ifStatus{$key}{$snmpIfDescr},
+                                 $ifStatus{$key}{$snmpLocIfDescr});
+
+         }
+         if ($ifStatus{$key}{$snmpIfOperStatus} == 5 ) { $ifdormant++ ;}
+      }
+   }
+   
+
+   if ($ifdown > 0) {
+      $state = 'CRITICAL';
+      $answer = sprintf("host '%s', interfaces up: %d, down: %d, dormant: %d<BR>",
+                        $hostname,
+                        $ifup,
+                        $ifdown,
+                        $ifdormant);
+      $answer = $answer . $ifmessage . "\n";
+   }
+   else {
+      $state = 'OK';
+      $answer = sprintf("host '%s', interfaces up: %d, down: %d, dormant: %d\n",
+                        $hostname,
+                        $ifup,
+                        $ifdown,
+                        $ifdormant);
+   }
+
+print ("$state: $answer");
+exit $ERRORS{$state};
+
diff --git a/contrib/check_ipxping.c b/contrib/check_ipxping.c
new file mode 100644
index 00000000..1ba10fe6
--- /dev/null
+++ b/contrib/check_ipxping.c
@@ -0,0 +1,200 @@
+/******************************************************************************************
+ *
+ * CHECK_IPXPING.C
+ *
+ * Program: IPX ping plugin for Nagios
+ * License: GPL
+ * Copyright (c) 1999 Ethan Galstad (nagios@nagios.org)
+ *
+ * Last Modified: 09-24-1999
+ *
+ * Command line: CHECK_IPXPING <dest_network> <dest_address> <wrtt> <crtt>
+ *
+ * Description:
+ *
+ * This plugin will use the /usr/bin/ipxping command to ping the specified host using the
+ * IPX protocol.  Note: Linux users must have IPX support compiled into the kernerl and
+ * must have IPX configured correctly in order for this plugin to work.
+ * If the round trip time value is above the <wrtt> level, a STATE_WARNING is
+ * returned.  If it exceeds the <crtt> level, a STATE_CRITICAL is returned.
+ *
+ *
+ *
+ * IMPORTANT!!
+ *
+ * This plugin will only work with the ipxping command that has been ported to Linux.
+ * The version for Sun takes different command line arguments and differs in its output.
+ *
+ *****************************************************************************************/
+
+#include "../common/config.h"
+#include "../common/common.h"
+#include "netutils.h"
+
+/* this should be moved out to the configure script! */
+#define IPXPING_COMMAND "/tmp/ipxping/ipxping"
+
+/* these should be moved to the common header file */
+#define MAX_IPXNET_ADDRESS_LENGTH       12
+#define MAX_IPXHOST_ADDRESS_LENGTH      18
+
+int socket_timeout=DEFAULT_SOCKET_TIMEOUT;
+char dest_network[MAX_IPXNET_ADDRESS_LENGTH];
+char dest_address[MAX_IPXHOST_ADDRESS_LENGTH];
+int wrtt;
+int crtt;
+
+int process_arguments(int,char **);
+
+FILE * spopen(const char *);
+int spclose(FILE *);
+
+int main(int argc, char **argv){
+        char command_line[MAX_INPUT_BUFFER];
+        int rtt;
+        int bytes_returned;
+        int result=STATE_OK;
+        FILE *fp;
+        char input_buffer[MAX_INPUT_BUFFER];
+        char *substr;
+        int current_line;
+
+        if(process_arguments(argc,argv)!=OK){
+                printf("Incorrect arguments supplied\n");
+                printf("\n");
+                printf("IPX ping plugin for Nagios\n");
+                printf("Copyright (c) 1999 Ethan Galstad (nagios@nagios.org)\n");
+                printf("Last Modified: 09-24-1999\n");
+                printf("License: GPL\n");
+                printf("\n");
+                printf("Usage: %s <dest_network> <dest_address> <wrtt> <crtt> [-to to_sec]\n",argv[0]);
+                printf("\n");
+                printf("Options:\n");
+                printf(" <dest_network> = IPX network that the remote host lies on.  (Hex Format - 00:00:00:00)\n");
+                printf(" <dest_address> = MAC address of the remote host.  (Hex Format - 00:00:00:00:00:00)\n");
+                printf(" <wrtt>         = Round trip time in milliseconds necessary to result in a WARNING state\n");
+                printf(" <crtt>         = Round trip time in milliseconds necessary to result in a CRITICAL state\n");
+                printf(" [to_sec]       = Seconds before we should timeout waiting for ping result.  Default = %d sec\n",DEFAULT_SOCKET_TIMEOUT);
+                printf("\n");
+                printf("Notes:\n");
+                printf("This plugin will use the /usr/bin/ipxping command to ping the specified host using\n");
+                printf("the IPX protocol.  IPX support must be compiled into the kernel and your host must\n");
+                printf("be correctly configured to use IPX before this plugin will work! An RPM package of\n");
+                printf("the ipxping binary can be found at...\n");
+                printf("http://www.rpmfind.net/linux/RPM/contrib/libc5/i386/ipxping-0.0-2.i386.shtml\n");
+                printf("\n");
+                return STATE_UNKNOWN;
+                }
+  
+        /* create the command line to use... */
+        sprintf(command_line,"%s %s %s",IPXPING_COMMAND,dest_network,dest_address);
+
+        /* initialize alarm signal handling */
+        signal(SIGALRM,socket_timeout_alarm_handler);
+
+        /* set socket timeout */
+        alarm(socket_timeout);
+
+        /* run the command */
+        fp = spopen(command_line);
+        if(fp==NULL){
+                printf("Unable to open pipe: %s",command_line);
+                return STATE_UNKNOWN;
+                }
+
+        current_line=0;
+        while(fgets(input_buffer,MAX_INPUT_BUFFER-1,fp)){
+
+                current_line++;
+
+                /* skip the first line of the output */
+                if(current_line==1)
+                        continue;
+
+                /* we didn't get the "is alive" */
+                if(current_line==2 && !strstr(input_buffer,"is alive"))
+                        result=STATE_CRITICAL;
+
+                /* get the round trip time */
+                if(current_line==3){
+                        substr=strtok(input_buffer,":");
+                        substr=strtok(NULL,"\n");
+                        rtt=atoi(substr);
+                        }
+
+                /* get the number of bytes returned */
+                if(current_line==4 && strstr(input_buffer,"bytes returned")){
+                        bytes_returned=atoi(input_buffer);
+                        }
+                }
+
+        /* close the pipe */
+        spclose(fp);
+
+        /* reset the alarm */
+        alarm(0);
+
+        if(current_line==1 || result==STATE_CRITICAL)
+                printf("IPX Ping problem - No response from host\n");
+        else{
+
+                if(rtt>crtt)
+                        result=STATE_CRITICAL;
+                else if(rtt>wrtt)
+                        result=STATE_WARNING;
+
+                printf("IPX Ping %s - RTT = %d ms, %d bytes returned from %s %s\n",(result==STATE_OK)?"ok":"problem",rtt,bytes_returned,dest_network,dest_address);
+                }
+        
+
+        return result;
+        }
+
+
+
+/* process all arguments passed on the command line */
+int process_arguments(int argc, char **argv){
+        int x;
+
+        /* no options were supplied */
+        if(argc<5)
+                return ERROR;
+
+        /* get the destination network address */
+        strncpy(dest_network,argv[1],sizeof(dest_network)-1);
+        dest_network[sizeof(dest_network)-1]='\x0';
+
+        /* get the destination host address */
+        strncpy(dest_address,argv[2],sizeof(dest_address)-1);
+        dest_address[sizeof(dest_address)-1]='\x0';
+
+        /* get the round trip time variables */
+        wrtt=atoi(argv[3]);
+        crtt=atoi(argv[4]);
+
+        /* process remaining arguments */
+        for(x=6;x<=argc;x++){
+
+                /* we got the timeout to use */
+                if(!strcmp(argv[x-1],"-to")){
+                        if(x<argc){
+                                socket_timeout=atoi(argv[x]);
+                                if(socket_timeout<=0)
+                                        return ERROR;
+                                x++;
+                                }
+                        else
+                                return ERROR;
+                        }
+
+                /* else we got something else... */
+                else
+                        return ERROR;
+                }
+
+        return OK;
+        }
+
+
+
+
diff --git a/contrib/check_joy.sh b/contrib/check_joy.sh
new file mode 100755
index 00000000..cd076db9
--- /dev/null
+++ b/contrib/check_joy.sh
@@ -0,0 +1,69 @@
+#! /bin/sh
+
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
+
+PROGNAME=`basename $0`
+PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'`
+REVISION=`echo '$Revision$' | sed -e 's/[^0-9.]//g'`
+STATUS=""
+
+. $PROGPATH/utils.sh
+
+
+print_usage() {
+        echo "Usage: $PROGNAME /dev/js<#> <button #>"
+}
+
+print_help() {
+        print_revision $PROGNAME $REVISION
+        echo ""
+        print_usage
+        echo ""
+        echo "This plugin checks a joystick button status using the "
+        echo "joyreadbutton utility from the joyd package."
+        echo ""
+        support
+        exit 0
+}
+
+if [ $# -ne 2 ]; then
+        print_usage
+        exit 0
+fi
+
+case "$1" in
+        --help)
+                print_help
+                exit 0
+                ;;
+        -h)
+                print_help
+                exit 0
+                ;;
+        --version)
+        print_revision $PROGNAME $REVISION
+                exit 0
+                ;;
+        -V)
+                print_revision $PROGNAME $REVISION
+                exit 0
+                ;;
+        /dev/js*)
+                joyreadbutton $1 $2 1>&1 1>/dev/null
+                STATUS=$?
+                if [ "$STATUS" -eq 0 ]; then
+                        echo OK
+                        exit 0
+                elif [ "$STATUS" -eq 1 ];then
+                        echo CRITICAL
+                        exit 2
+                else
+                        echo UNKNOWN
+                        exit -1
+                fi
+                ;;
+        *)
+                print_usage
+                exit 0
+                ;;
+esac
diff --git a/contrib/check_maxchannels.pl b/contrib/check_maxchannels.pl
new file mode 100644
index 00000000..a3ce525b
--- /dev/null
+++ b/contrib/check_maxchannels.pl
@@ -0,0 +1,231 @@
+#!/usr/bin/perl -w
+#
+# check_maxchannels.pl - nagios plugin 
+# 
+#
+# Copyright (C) 2000 Christoph Kron
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+#
+# Report bugs to: ck@zet.net
+#
+# 11.01.2000 Version 1.0
+
+use strict;
+
+use Net::SNMP;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+
+my $status;
+my $TIMEOUT = 15;
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+        
+my $state = "UNKNOWN";
+my $answer = "";
+my $snmpkey;
+my $snmpoid;
+my $key;
+my $community = "public";
+my $port = 161;
+my @snmpoids;
+# free channels
+my $snmpWanAvailableChannels = '1.3.6.1.4.1.529.4.23.0';
+# maximum channels
+my $snmpWanSwitchedChannels = '1.3.6.1.4.1.529.4.24.0';
+my $snmpWanDisabledChannels = '1.3.6.1.4.1.529.4.25.0';
+my $snmpWanActiveChannels = '1.3.6.1.4.1.529.4.26.0';
+my $snmpWanNailedChannels = '1.3.6.1.4.1.529.4.27.0';
+my $snmpWanOutOfServiceChannels = '1.3.6.1.4.1.529.4.28.0';
+my $snmpEventCurrentActiveSessions = '1.3.6.1.4.1.529.10.6.0';
+# since startup
+my $snmpEventTotalNoModems = '1.3.6.1.4.1.529.10.15.0';
+# lan modem
+my $snmpDeadLanModem = '1.3.6.1.4.1.529.15.7.0';
+my $snmpDisabledLanModem = '1.3.6.1.4.1.529.15.5.0';
+my $snmpSuspectLanModem = '1.3.6.1.4.1.529.15.3.0';
+my $snmpAvailLanModem = '1.3.6.1.4.1.529.15.1.0';
+my $snmpBusyLanModem = '1.3.6.1.4.1.529.15.9.0';
+# max modems
+my $snmpMdmNumber  = '1.3.6.1.2.1.38.1.1.0';
+my $hostname;
+my $session;
+my $error;
+my $response;
+my %wanStatus;
+
+
+my $WanAvailableChannels;
+my $WanSwitchedChannels;
+my $WanDisabledChannels;
+my $WanActiveChannels;
+my $WanNailedChannels;
+my $WanOutOfServiceChannels;
+my $EventCurrentActiveSessions;
+my $EventTotalNoModems;
+my $DeadLanModem;
+my $DisabledLanModem;
+my $SuspectLanModem;
+my $AvailLanModem;
+my $BusyLanModem;
+my $MdmNumber;
+
+
+sub usage {
+  printf "\nMissing arguments!\n";
+  printf "\n";
+  printf "Perl Check maxchannels plugin for Nagios\n";
+  printf "monitors ISDN lines and modems on Ascend MAX 2000/4000/6000/TNT\n";
+  printf "usage: \n";
+  printf "check_maxchannel.pl -c <READCOMMUNITY> -p <PORT> <HOSTNAME>\n";
+  printf "Copyright (C) 2000 Christoph Kron\n";
+  printf "check_maxchannels.pl comes with ABSOLUTELY NO WARRANTY\n";
+  printf "This programm is licensed under the terms of the ";
+  printf "GNU General Public License\n(check source code for details)\n";
+  printf "\n\n";
+  exit $ERRORS{"UNKNOWN"};
+}
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No snmp response from $hostname (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+$status = GetOptions("community=s",\$community,
+                     "port=i",\$port);
+if ($status == 0)
+{
+        &usage;
+}
+  
+   #shift;
+   $hostname  = shift || &usage;
+
+
+
+push(@snmpoids,$snmpWanAvailableChannels);
+push(@snmpoids,$snmpWanSwitchedChannels);
+push(@snmpoids,$snmpWanDisabledChannels);
+push(@snmpoids,$snmpWanActiveChannels);
+push(@snmpoids,$snmpWanNailedChannels);
+push(@snmpoids,$snmpWanOutOfServiceChannels);
+
+push(@snmpoids,$snmpEventCurrentActiveSessions);
+
+push(@snmpoids,$snmpEventTotalNoModems);
+push(@snmpoids,$snmpDeadLanModem);
+push(@snmpoids,$snmpDisabledLanModem);
+push(@snmpoids,$snmpSuspectLanModem);
+push(@snmpoids,$snmpAvailLanModem);
+push(@snmpoids,$snmpBusyLanModem);
+push(@snmpoids,$snmpMdmNumber);
+
+   ($session, $error) = Net::SNMP->session(
+      -hostname  => $hostname,
+      -community => $community,
+      -port      => $port
+   );
+
+   if (!defined($session)) {
+      $state='UNKNOWN';
+      $answer=$error;
+      print ("$state: $answer");
+      exit $ERRORS{$state};
+   }
+
+   if (!defined($response = $session->get_request(@snmpoids))) {
+      $answer=$session->error;
+      $session->close;
+      $state = 'CRITICAL';
+      print ("$state: $answer,$community");
+      exit $ERRORS{$state};
+   }
+
+
+$WanAvailableChannels = $response->{$snmpWanAvailableChannels};
+$WanSwitchedChannels = $response->{$snmpWanSwitchedChannels};
+$WanDisabledChannels = $response->{$snmpWanDisabledChannels};
+$WanActiveChannels = $response->{$snmpWanActiveChannels};
+$WanNailedChannels = $response->{$snmpWanNailedChannels};
+$WanOutOfServiceChannels = $response->{$snmpWanOutOfServiceChannels};
+$EventCurrentActiveSessions = $response->{$snmpEventCurrentActiveSessions};
+$EventTotalNoModems = $response->{$snmpEventTotalNoModems};
+$DeadLanModem = $response->{$snmpDeadLanModem};
+$DisabledLanModem = $response->{$snmpDisabledLanModem};
+$SuspectLanModem = $response->{$snmpSuspectLanModem};
+$AvailLanModem = $response->{$snmpAvailLanModem};
+$BusyLanModem = $response->{$snmpBusyLanModem};
+$MdmNumber = $response->{$snmpMdmNumber};
+
+# less than 50% -> WARNING
+if ( 0 < $WanOutOfServiceChannels 
+     && $WanOutOfServiceChannels < ($snmpWanSwitchedChannels * 0.5) ) {
+   $state = 'WARNING';
+}
+elsif ($WanOutOfServiceChannels > 0) {
+   $state = 'CRITICAL';
+}
+elsif ($DeadLanModem > 0) {
+   $state = 'CRITICAL';
+}
+elsif ($SuspectLanModem > 0) {
+   $state = 'WARNING';
+}
+elsif ($AvailLanModem == 0) {
+   $state = 'WARNING';
+}
+else {
+   $state = 'OK';
+}
+
+
+$answer =  sprintf("active sessions: %d (%d), active modems: %d (%d)<BR>",
+                $EventCurrentActiveSessions,
+                $WanSwitchedChannels,
+                $BusyLanModem,
+                $MdmNumber);
+                
+$answer .= sprintf("channels available: %d, disabled: %d",
+                $WanAvailableChannels,
+                $WanDisabledChannels);
+
+$answer .= sprintf(", out of service: %d, nailed: %d<BR>",
+                $WanOutOfServiceChannels,
+                $WanNailedChannels);
+
+$answer .= sprintf("modems avail.: %d, disabled: %d, suspect: %d, dead: %d<BR>",
+                $AvailLanModem,
+                $DisabledLanModem,
+                $SuspectLanModem,
+                $DeadLanModem);
+
+$answer .= sprintf("unserviced modem calls: %d (since startup)\n",
+                $EventTotalNoModems);
+
+$session->close;
+
+print ("$state: $answer");
+exit $ERRORS{$state};
+
diff --git a/contrib/check_maxwanstate.pl b/contrib/check_maxwanstate.pl
new file mode 100644
index 00000000..4fbb9da2
--- /dev/null
+++ b/contrib/check_maxwanstate.pl
@@ -0,0 +1,201 @@
+#!/usr/bin/perl -w
+#
+# check_maxwanstate.pl - nagios plugin 
+# 
+#
+# Copyright (C) 2000 Christoph Kron
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+#
+# Report bugs to: ck@zet.net
+#
+# 11.01.2000 Version 1.0
+
+use strict;
+
+use Net::SNMP;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+
+my $status;
+my $TIMEOUT = 1500;
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my %wanLineState = (
+            1,'ls-unknown',
+            2,'ls-does-not-exist',
+            3,'ls-disabled',
+            4,'ls-no-physical',
+            5,'ls-no-logical',
+            6,'ls-point-to-point',
+            7,'ls-multipoint-1',
+            8,'ls-multipoint-2',
+            9,'ls-loss-of-sync',
+            10,'ls-yellow-alarm',
+            11,'ls-ais-receive',
+            12,'ls-no-d-channel',
+            13,'ls-active',
+            14,'ls-maintenance');
+
+my %wanLineType = (
+        '1.3.6.1.4.1.529.4.1','Any',
+        '1.3.6.1.4.1.529.4.2','T1',
+        '1.3.6.1.4.1.529.4.3','E1',
+        '1.3.6.1.4.1.529.4.4','Dpnss',
+        '1.3.6.1.4.1.529.4.5','Bri',
+        '1.3.6.1.4.1.529.4.6','S562',
+        '1.3.6.1.4.1.529.4.7','S564',
+        '1.3.6.1.4.1.529.4.8','Sdsl',
+        '1.3.6.1.4.1.529.4.9','AdslCap');
+        
+my $state = "UNKNOWN";
+my $answer = "";
+my $snmpkey;
+my $snmpoid;
+my $key;
+my $community = "public";
+my $port = 161;
+my @snmpoids;
+my $snmpWanLineName = '1.3.6.1.4.1.529.4.21.1.2';
+my $snmpWanLineType = '1.3.6.1.4.1.529.4.21.1.3';
+my $snmpWanLineState = '1.3.6.1.4.1.529.4.21.1.5';
+my $snmpWanLineUsage = '1.3.6.1.4.1.529.4.21.1.8';
+
+my $hostname;
+my $session;
+my $error;
+my $response;
+my %wanStatus;
+my $ifup =0 ;
+my $ifdown =0;
+my $ifdormant = 0;
+my $ifmessage;
+
+sub usage {
+  printf "\nMissing arguments!\n";
+  printf "\n";
+  printf "Perl Check maxwanstate plugin for Nagios\n";
+  printf "monitors E1/T1 interface status\n";
+  printf "usage: \n";
+  printf "check_maxwanstate.pl -c <READCOMMUNITY> -p <PORT> <HOSTNAME>";
+  printf "Copyright (C) 2000 Christoph Kron\n";
+  printf "check_maxwanstate.pl comes with ABSOLUTELY NO WARRANTY\n";
+  printf "This programm is licensed under the terms of the ";
+  printf "GNU General Public License\n(check source code for details)\n";
+  printf "\n\n";
+  exit $ERRORS{"UNKNOWN"};
+}
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No snmp response from $hostname (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+$status = GetOptions("community=s",\$community,
+                     "port=i",\$port);
+if ($status == 0)
+{
+        &usage;
+}
+  
+   #shift;
+   $hostname  = shift || &usage;
+
+
+
+push(@snmpoids,$snmpWanLineUsage);
+push(@snmpoids,$snmpWanLineState);
+push(@snmpoids,$snmpWanLineName);
+push(@snmpoids,$snmpWanLineType);
+
+foreach $snmpoid (@snmpoids) {
+
+   ($session, $error) = Net::SNMP->session(
+      -hostname  => $hostname,
+      -community => $community,
+      -port      => $port
+   );
+
+   if (!defined($session)) {
+      $state='UNKNOWN';
+      $answer=$error;
+      print ("$state: $answer");
+      exit $ERRORS{$state};
+   }
+
+   if (!defined($response = $session->get_table($snmpoid))) {
+      $answer=$session->error;
+      $session->close;
+      $state = 'CRITICAL';
+      print ("$state: $answer,$community,$snmpkey");
+      exit $ERRORS{$state};
+   }
+
+   foreach $snmpkey (keys %{$response}) {
+      $snmpkey =~ /.*\.(\d+)$/;
+      $key = $1;
+      $wanStatus{$key}{$snmpoid} = $response->{$snmpkey};
+   }
+   $session->close;
+}
+
+   foreach $key (keys %wanStatus) {
+      # look only at active Interfaces lu-trunk(5)
+      if ($wanStatus{$key}{$snmpWanLineUsage} == 5 ) {
+
+         # 13 -> active
+         if ($wanStatus{$key}{$snmpWanLineState} == 13 ) {
+             $ifup++;
+         }
+         else {
+             $ifdown++ ;
+             $ifmessage .= sprintf("%s interface status : %s (%s)<BR>",
+                         $wanLineType{$wanStatus{$key}{$snmpWanLineType}},
+                         $wanLineState{$wanStatus{$key}{$snmpWanLineState}},
+                         $wanStatus{$key}{$snmpWanLineName});
+
+         }
+      }
+   }
+   
+
+   if ($ifdown > 0) {
+      $state = 'CRITICAL';
+      $answer = sprintf("host '%s', interfaces up: %d, down: %d<BR>",
+                        $hostname,
+                        $ifup,
+                        $ifdown);
+      $answer = $answer . $ifmessage . "\n";
+   }
+   else {
+      $state = 'OK';
+      $answer = sprintf("host '%s', interfaces up: %d, down: %d\n",
+                        $hostname,
+                        $ifup,
+                        $ifdown);
+   }
+
+print ("$state: $answer");
+exit $ERRORS{$state};
+
diff --git a/contrib/check_mem.pl b/contrib/check_mem.pl
new file mode 100644
index 00000000..f0c82129
--- /dev/null
+++ b/contrib/check_mem.pl
@@ -0,0 +1,146 @@
+#!/usr/bin/perl -w
+# $Id$
+
+# check_mem.pl Copyright (C) 2000 Dan Larsson <dl@tyfon.net>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# you should have received a copy of the GNU General Public License
+# along with this program (or with Nagios);  if not, write to the
+# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA
+
+# Tell Perl what we need to use
+use strict;
+use Getopt::Std;
+
+use vars qw($opt_c $opt_f $opt_u $opt_w
+            $free_memory $used_memory $total_memory
+            $crit_level $warn_level
+            %exit_codes @memlist
+            $percent $fmt_pct 
+            $verb_err $command_line);
+
+# Predefined exit codes for Nagios
+%exit_codes   = ('UNKNOWN' ,-1,
+                 'OK'      , 0,
+                 'WARNING' , 1,
+                 'CRITICAL', 2,);
+
+# Turn this to 1 to see reason for parameter errors (if any)
+$verb_err     = 0;
+
+# This the unix command string that brings Perl the data
+$command_line = `vmstat | tail -1 | awk '{print \$4,\$5}'`;
+
+chomp $command_line;
+@memlist      = split(/ /, $command_line);
+
+# Define the calculating scalars
+$used_memory  = $memlist[0];
+$free_memory  = $memlist[1];
+$total_memory = $used_memory + $free_memory;
+
+# Get the options
+if ($#ARGV le 0)
+{
+  &usage;
+}
+else
+{
+  getopts('c:fuw:');
+}
+
+# Shortcircuit the switches
+if (!$opt_w or $opt_w == 0 or !$opt_c or $opt_c == 0)
+{
+  print "*** You must define WARN and CRITICAL levels!" if ($verb_err);
+  &usage;
+}
+elsif (!$opt_f and !$opt_u)
+{
+  print "*** You must select to monitor either USED or FREE memory!" if ($verb_err);
+  &usage;
+}
+
+# Check if levels are sane
+if ($opt_w <= $opt_c and $opt_f)
+{
+  print "*** WARN level must not be less than CRITICAL when checking FREE memory!" if ($verb_err);
+  &usage;
+}
+elsif ($opt_w >= $opt_c and $opt_u)
+{
+  print "*** WARN level must not be greater than CRITICAL when checking USED memory!" if ($verb_err);
+  &usage;
+}
+
+$warn_level   = $opt_w;
+$crit_level   = $opt_c;
+
+if ($opt_f)
+{
+  $percent    = $free_memory / $total_memory * 100;
+  $fmt_pct    = sprintf "%.1f", $percent;
+  if ($percent <= $crit_level)
+  {
+    print "Memory CRITICAL - $fmt_pct% ($free_memory kB) free\n";
+    exit $exit_codes{'CRITICAL'};
+  }
+  elsif ($percent <= $warn_level)
+  {
+    print "Memory WARNING - $fmt_pct% ($free_memory kB) free\n";
+    exit $exit_codes{'WARNING'};
+  }
+  else
+  {
+    print "Memory OK - $fmt_pct% ($free_memory kB) free\n";
+    exit $exit_codes{'OK'};
+  }
+}
+elsif ($opt_u)
+{
+  $percent    = $used_memory / $total_memory * 100;
+  $fmt_pct    = sprintf "%.1f", $percent;
+  if ($percent >= $crit_level)
+  {
+    print "Memory CRITICAL - $fmt_pct% ($used_memory kB) used\n";
+    exit $exit_codes{'CRITICAL'};
+  }
+  elsif ($percent >= $warn_level)
+  {
+    print "Memory WARNING - $fmt_pct% ($used_memory kB) used\n";
+    exit $exit_codes{'WARNING'};
+  }
+  else
+  {
+    print "Memory OK - $fmt_pct% ($used_memory kB) used\n";
+    exit $exit_codes{'OK'};
+  }
+}
+
+# Show usage
+sub usage()
+{
+  print "\ncheck_mem.pl v1.0 - Nagios Plugin\n\n";
+  print "usage:\n";
+  print " check_mem.pl -<f|u> -w <warnlevel> -c <critlevel>\n\n";
+  print "options:\n";
+  print " -f           Check FREE memory\n";
+  print " -u           Check USED memory\n";
+  print " -w PERCENT   Percent free/used when to warn\n";
+  print " -c PERCENT   Percent free/used when critical\n";
+  print "\nCopyright (C) 2000 Dan Larsson <dl\@tyfon.net>\n";
+  print "check_mem.pl comes with absolutely NO WARRANTY either implied or explicit\n";
+  print "This program is licensed under the terms of the\n";
+  print "GNU General Public License (check source code for details)\n";
+  exit $exit_codes{'UNKNOWN'}; 
+}
diff --git a/contrib/check_memory.tgz b/contrib/check_memory.tgz
new file mode 100644
index 00000000..b0f80160
--- /dev/null
+++ b/contrib/check_memory.tgz
diff --git a/contrib/check_mysql.c b/contrib/check_mysql.c
new file mode 100644
index 00000000..9abacf87
--- /dev/null
+++ b/contrib/check_mysql.c
@@ -0,0 +1,75 @@
+/*****************************************************************
+ *
+ * Program: check_mysql.c
+ * License: GPL
+ *
+ * Written by Tim Weippert
+ *  (based on plugins by Ethan Galstad and MySQL example code)
+ *
+ * Command line: check_mysql <host> [user] [passwd]
+ *      <host> can be the FQDN or the IP-Adress
+ *      [user] and [passwd] are optional
+ *      
+ * Description:
+ * 
+ * This plugin attempts to connect to an MySQL Server
+ * with the optional specified parameters user and passwd.
+ * Normaly the host and a user HAVE to assigned.
+ *
+ * The plugin returns 
+ * STATE_OK and the Version Number of the Server when all is fine
+ * STATE_CRITICAL if the Connection can't be esablished
+ * STATE_WARNING if the connection was established but the 
+ * program can't get the Versoin Number
+ * STATE_UNKNOWN if to many parameters are given
+ *
+ * Copyright (c) 1999 by Tim Weippert
+ *
+ * Changes:
+ *   16.12.1999: Changed the return codes from numbers to statements
+ *               
+ *******************************************************************/
+
+#include "../common/config.h"
+#include "../common/common.h"
+#include "mysql.h"
+
+MYSQL mysql;
+
+int main(int argc, char **argv)
+{
+  uint i = 0;
+  char *host;
+  char *user;
+  char *passwd;
+  
+  char *status;
+  char *version;
+  
+  if ( argc > 4 ) {
+    printf("Too many Arguments supplied - %i .\n", argc);
+    printf("Usage: %s <host> [user] [passwd]\n", argv[0]);
+    return STATE_UNKNOWN;
+  }
+
+  (host = argv[1]) || (host = NULL);
+  (user = argv[2]) || (user = NULL);
+  (passwd = argv[3]) || (passwd = NULL);
+                  
+  if (!(mysql_connect(&mysql,host,user,passwd))) {
+    printf("Can't connect to Mysql on Host: %s\n", host);
+    return STATE_CRITICAL;
+  }
+  
+  if ( !(version = mysql_get_server_info(&mysql)) ) {
+    printf("Connect OK, but can't get Serverinfo ... something wrong !\n");
+    return STATE_WARNING;
+  }
+  
+  printf("Mysql ok - Running Version: %s\n", version);
+  
+  mysql_close(&mysql);
+  return STATE_OK;
+}
+                                                                                                            
+
diff --git a/contrib/check_mysql.pl b/contrib/check_mysql.pl
new file mode 100644
index 00000000..143d5a5a
--- /dev/null
+++ b/contrib/check_mysql.pl
@@ -0,0 +1,73 @@
+#!/nyet/bin/perl 
+#
+# (c)1999 Mitch Wright, NetLine Corporation
+# Read the GNU copyright stuff for all the legalese
+#
+# Check to see that our MySQL server(s) are up and running.
+# This plugin requires that mysqladmin(1) is installed on the system.
+# Since it is part of the MySQL distribution, that should be a problem.
+#
+# If no parameters are giving, a usage statement is output.
+#
+# Exit 0 on success, providing some informational output
+# Exit 2 on failure, provide what we can...
+#
+
+require 5.004;
+
+sub usage;
+
+my $TIMEOUT = 15;
+my $MYSQLADMIN = "/usr/local/bin/mysqladmin";
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my $host = shift || &usage(%ERRORS);
+my $user = shift || &usage(%ERRORS);
+my $pass = shift || "";
+my $warn = shift || 60;
+my $crit = shift || 100;
+
+my $state = "OK";
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: No response from MySQL server (alarm)\n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+open (OUTPUT,
+      "$MYSQLADMIN -h $host -u $user --password=\"$pass\" version 2>&1
+      |");
+
+while (<OUTPUT>) {
+  if (/failed/) { $state="CRITICAL"; s/.*://; $status=$_; last; }
+  next if /^\s*$/;
+  if (/^Server version\s+(\d+.*)/) { $version = $1; next; }
+  if (/^Uptime:\s+(\d.*)/) { $uptime = $1; next; }
+  if (/^Threads:\s+(\d+)\s+/) { $threads = $1; next; }
+}
+
+$status = "Version $version -- $threads Threads <br>Uptime $uptime" if
+$state ne "CRITICAL";
+
+if ($threads >= $warn) { $state = "WARNING"; }
+if ($threads >= $crit) { $state = "CRITICAL"; }
+
+print $status;
+exit $ERRORS{$state};
+
+sub usage {
+   print "Required arguments not given!\n\n";
+   print "MySQL status checker plugin for Nagios, V1.01\n";
+   print "Copyright (c) 1999-2000 Mitch Wright \n\n";
+   print "Usage: check_mysql.pl <host> <user> [<pass> [<warn>
+   [<crit>]]]\n\n"; print "       <pass> = password to use for <user> at
+   <host>\n"; print "       <warn> = number of threads to warn us
+   about\n"; print "       <crit> = number of threads to scream at us
+   about\n"; exit $ERRORS{"UNKNOWN"};
+}
diff --git a/contrib/check_nagios.pl b/contrib/check_nagios.pl
new file mode 100644
index 00000000..7d15d4db
--- /dev/null
+++ b/contrib/check_nagios.pl
@@ -0,0 +1,48 @@
+#!/usr/bin/perl
+# denao - denao@uol.com.br - Systems Engineering
+# Universo Online - http://www.uol.com.br 
+use DBI;
+use Time::Local;
+
+my $t_lambuja = 5;           # (expire_minutes)
+my $databasename = "";       # The name of nagios database (i.e.: nagios)
+my $table = "programstatus";
+my $where = "localhost";     # The machine where the database
+my $port = "3306";
+my $base = "DBI:mysql:$databasename:$where:$port";
+my $user = "";               # the user to connect to the database 
+                             # (needs permission to "select at programstatus table only"
+my $password = "";           # the password (if any)
+my %results;
+my @fields = qw( last_update );
+my $dbh = DBI->connect($base,$user,$password);
+my $fields = join(', ', @fields);
+my $query = "SELECT $fields FROM $table";
+
+my $sth = $dbh->prepare($query);
+$sth->execute();
+
+@results{@fields} = ();
+$sth->bind_columns(map { \$results{$_} } @fields);
+
+$sth->fetch();
+$sth->finish();
+$dbh->disconnect();
+
+check_update();
+
+sub check_update {
+($yea,$mon,$day,$hou,$min,$sec)=($results{last_update}=~/(\d+)\-(\d+)\-(\d+)\s(\d+)\:(\d+)\:(\d+)/);
+($sec_now, $min_now, $hou_now, $day_now, $mon_now, $yea_now) = (localtime(time))[0,1,2,3,4,5];
+$mon_now+=1; $yea_now+=1900;
+$unixdate=timelocal($sec,$min,$hou,$day,$mon,$yea);
+$unixdate_now=timelocal($sec_now,$min_now,$hou_now,$day_now,$mon_now,$yea_now);
+   if (scalar($unixdate_now - $unixdate) > scalar($t_lambuja * 60)) {
+       print "Nagios problem: nagios is down, for at least " . scalar($t_lambuja) . " minutes.\n";
+       exit(1);
+   } else {
+       print "Nagios ok: status data updated " . scalar($unixdate_now - $unixdate) . " seconds ago\n";
+       exit(0);
+   }
+}
+
diff --git a/contrib/check_netapp.pl b/contrib/check_netapp.pl
new file mode 100755
index 00000000..d556e9da
--- /dev/null
+++ b/contrib/check_netapp.pl
@@ -0,0 +1,178 @@
+#!/usr/bin/perl -wT
+# check_netapp
+# 
+# Copyright (C) 2000  Leland E. Vandervort <leland@mmania.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# you should have received a copy of the GNU General Public License
+# along with this program (or with Nagios);  if not, write to the
+# Free Software Foundation, Inc., 59 Temple Place - Suite 330, 
+# Boston, MA 02111-1307, USA
+####################################
+# checks for overtemperature, fans, psu, and nfs operations/second on
+# Network Appliance Filers.  
+# Returns:  
+#  OK if temp, fans, psu OK and Ops/Sec below warning and critical
+#   Thresholds (default is warning=3500, critical=5000)  
+#    ** Note:  See the specifications for your Filer model for 
+#       the thresholds !
+#  Returns Warning if NFS Ops/Sec is above warning threshold
+#    (default 3500, or specified by -o command line option)
+#  Returns Critical if NFS Ops/Sec is above critical threshold
+#    ( -m option, or default 5000), or if overtem, psufault, or
+#    fanfault detected.
+#
+####################################
+#  Notes on operational limits for NetApp Filers:
+#   Platform                     Maximum Ops/Second (recommended)
+#   -------------------------------------------------------------
+#   F230                         1000
+#   F740                         5500
+#   F760                         9000
+####################################
+
+use Net::SNMP;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+my $status;
+my $response = "";
+my $TIMEOUT = 10;
+my $community = "public";
+my $port = 161;
+my $opsthresh = "3500";
+my $critical = "5000";
+
+my $status_string = "";
+
+my %OIDLIST = (
+                overtemp        =>      '1.3.6.1.4.1.789.1.2.4.1.0',
+                failedfan       =>      '1.3.6.1.4.1.789.1.2.4.2.0',
+                failedpsu       =>      '1.3.6.1.4.1.789.1.2.4.4.0',
+                nfsops          =>      '1.3.6.1.4.1.789.1.2.2.1.0'
+              );
+
+
+
+my %STATUSCODE = (  'UNKNOWN' => '-1',
+                    'OK' => '0',
+                    'WARNING' => '1',
+                    'CRITICAL' => '2');
+
+my $state = "UNKNOWN";
+
+
+$SIG{'ALRM'} = sub {
+    print "ERROR: No snmp response from $hostname (sigALRM)\n";
+    exit($STATUSCODE{"UNKNOWN"});
+};
+
+alarm($TIMEOUT);                    
+
+sub get_nfsops {
+        my $nfsops_start = &SNMPGET($OIDLIST{nfsops});
+        sleep(1);
+        my $nfsops_end = &SNMPGET($OIDLIST{nfsops});
+        my $nfsopspersec = $nfsops_end - $nfsops_start;
+        return($nfsopspersec);
+}
+
+
+sub show_help {
+    printf("\nPerl NetApp filer plugin for Nagios\n");
+    printf("Usage:\n");
+    printf("
+  check_netapp [options] <hostname>
+  Options:
+    -c snmp-community
+    -p snmp-port
+    -o Operations per second warning threshold 
+    -m Operations per second critical threshold
+
+");
+    printf("Copyright (C)2000 Leland E. Vandervort\n");
+    printf("check_netapp comes with absolutely NO WARRANTY either implied or explicit\n");
+    printf("This program is licensed under the terms of the\n");
+    printf("GNU General Public License\n(check source code for details)\n\n\n");
+    exit($STATUSCODE{"UNKNOWN"});
+}
+ 
+
+$status = GetOptions( "community=s", \$community,
+                      "port=i",      \$port,
+                      "opsthresh=i", \$opsthresh,
+                      "maxops=i",    \$critical );
+                     
+if($status == 0) {
+    &show_help;
+}
+
+sub SNMPGET {
+    $OID = shift;
+    ($session,$error) = Net::SNMP->session(
+        Hostname        =>      $hostname,
+        Community       =>      $community,
+        Port            =>      $port
+        );
+    if(!defined($session)) {
+        printf("$state %s\n", $error);
+        exit($STATUSCODE{$state});
+    }
+    if(!defined($response = $session->get_request($OID))) {
+        printf("$state %s\n", $session->error());
+        $session->close();
+        exit($STATUSCODE{$state});
+    }
+    $session->close();
+    return($response->{$OID});
+}
+
+$hostname = shift || &show_help;
+
+my $tempcheck = &SNMPGET($OIDLIST{overtemp});
+if($tempcheck == 1) {
+        $state = "OK";
+        $status_string .= "Temp OK ";
+}
+else {
+        $state = "CRITICAL";
+        $status_string .= "Temp CRIT";
+}
+
+foreach $element ('failedfan','failedpsu') {
+        my $my_return = &SNMPGET($OIDLIST{$element});
+        if(($my_return =~ /no/) || ($my_return == 0)) {
+                $status_string .= "$element = $my_return ";
+                $state = "OK";
+        }
+        else {
+                $status_string .= "$element = $my_return ";
+                $state = "CRITICAL";
+        }
+}
+
+my $tmp_opssec = &get_nfsops();
+
+if ($tmp_opssec >= $critical) {
+        $state = "CRITICAL";
+}
+elsif ($tmp_opssec >= $opsthresh) {
+        $state = "WARNING";
+}
+else {
+        $state = "OK";
+}
+
+$status_string .= "Ops\/Sec = $tmp_opssec ";
+
+print "$state $status_string\n";
+exit($STATUSCODE{$state});
diff --git a/contrib/check_nmap.py b/contrib/check_nmap.py
new file mode 100644
index 00000000..4f53406d
--- /dev/null
+++ b/contrib/check_nmap.py
@@ -0,0 +1,440 @@
+#!/usr/bin/python
+# Change the above line if python is somewhere else
+
+#
+# check_nmap
+#  
+# Program: nmap plugin for Nagios
+# License: GPL
+# Copyright (c)  2000 Jacob Lundqvist (jaclu@galdrion.com)
+#
+_version_ = '1.20'
+#
+#
+# Description:
+#
+# Does a nmap scan, compares open ports to those given on command-line
+# Reports warning for closed that should be open and error for
+# open that should be closed.
+# If optional ports are given, no warning is given if they are closed
+# and they are included in the list of valid ports.
+#
+#   Requirements:
+#     python
+#     nmap
+#
+# History
+# -------
+# 1.20   2000-07-15 jaclu Updated params to correctly comply to plugin-standard
+#                         moved support classes to utils.py
+# 1.16   2000-07-14 jaclu made options and return codes more compatible with 
+#                         the plugin developer-guidelines
+# 1.15   2000-07-14 jaclu added random string to temp-file name
+# 1.14   2000-07-14 jaclu added check for error from subproc
+# 1.10   2000-07-14 jaclu converted main part to class
+# 1.08   2000-07-13 jaclu better param parsing
+# 1.07   2000-07-13 jaclu changed nmap param to -P0
+# 1.06   2000-07-13 jaclu make sure tmp file is deleted on errors
+# 1.05   2000-07-12 jaclu in debug mode, show exit code
+# 1.03   2000-07-12 jaclu error handling on nmap output
+# 1.01   2000-07-12 jaclu added license
+# 1.00   2000-07-12 jaclu implemented timeout handling
+# 0.20   2000-07-10 jaclu Initial release
+
+
+import sys, os, string, whrandom
+
+import tempfile
+from getopt import getopt
+
+#
+# import generic Nagios-plugin stuff
+#
+import utils
+
+# Where temp files should be placed
+tempfile.tempdir='/usr/local/nagios/var'
+
+# Base name for tempfile
+tempfile.template='check_nmap_tmp.'
+
+# location and possibly params for nmap
+nmap_cmd='/usr/bin/nmap -P0'
+
+
+
+
+
+
+#
+#  the class that does all the real work in this plugin...
+#
+# 
+class CheckNmap:
+
+    # Retcodes, so we are compatible with nagios
+    #ERROR=    -1
+    UNKNOWN=  -1
+    OK=        0
+    WARNING=   1
+    CRITICAL=  2
+
+
+    def __init__(self,cmd_line=[]):
+        """Constructor.
+           arguments:
+             cmd_line: normaly sys.argv[1:] if called as standalone program
+        """
+        self.tmp_file=''
+        self.host=''       # host to check
+        self.timeout=10    
+        self.debug=0       # 1= show debug info
+        self.ports=[]      # list of mandatory ports
+        self.opt_ports=[]  # list of optional ports
+        self.ranges=''     # port ranges for nmap
+        self.exit_code=0   # numerical exit-code
+        self.exit_msg=''   # message to caller
+        
+        self.ParseCmdLine(cmd_line)
+        
+    def Run(self):
+        """Actually run the process.
+           This method should be called exactly once.
+        """
+        
+        #
+        # Only call check_host if cmd line was accepted earlier
+        #
+        if self.exit_code==0:
+            self.CheckHost()
+
+        self.CleanUp()
+        return self.exit_code,self.exit_msg
+    
+    def Version(self):
+        return 'check_nmap %s' % _version_
+    
+    #-----------------------------------------
+    #
+    # class internal stuff below...
+    #
+    #-----------------------------------------
+    
+    #
+    # Param checks
+    #
+    def param2int_list(self,s):
+        lst=string.split(string.replace(s,',',' '))
+        try:
+            for i in range(len(lst)):
+                lst[i]=int(lst[i])
+        except:
+            lst=[]
+        return lst
+            
+    def ParseCmdLine(self,cmd_line):
+        try:
+            opt_list=getopt(cmd_line,'vH:ho:p:r:t:V',['debug','host=','help',
+                'optional=','port=','range=','timeout','version'])
+            for opt in opt_list[0]:
+                if opt[0]=='-v' or opt[0]=='--debug':
+                    self.debug=1
+                elif opt[0]=='-H' or opt[0]=='--host':
+                    self.host=opt[1]
+                elif opt[0]=='-h' or opt[0]=='--help':
+                    doc_help()
+                    self.exit_code=1 # request termination
+                    break
+                elif opt[0]=='-o' or opt[0]=='--optional':
+                    self.opt_ports=self.param2int_list(opt[1])
+                elif opt[0]=='-p' or opt[0]=='--port':
+                    self.ports=self.param2int_list(opt[1])
+                elif opt[0]=='-r' or opt[0]=='--range':
+                    r=string.replace(opt[1],':','-')
+                    self.ranges=r
+                elif opt[0]=='-t' or opt[0]=='--timeout':
+                    self.timeout=opt[1]
+                elif opt[0]=='-V' or opt[0]=='--version':
+                    print self.Version()
+                    self.exit_code=1 # request termination
+                    break
+                else:
+                    self.host=''
+                    break
+
+        except:
+            # unknown param
+            self.host=''
+            
+        if self.debug:
+            print 'Params:'
+            print '-------'
+            print 'host             = %s' % self.host
+            print 'timeout          = %s' % self.timeout
+            print 'ports            = %s' % self.ports
+            print 'optional ports   = %s' % self.opt_ports
+            print 'ranges           = %s' % self.ranges
+            print
+        
+        #
+        # a option that wishes us to terminate now has been given...
+        # 
+        # This way, you can test params in debug mode and see what this 
+        # program recognised by suplying a version param at the end of
+        # the cmd-line
+        #
+        if self.exit_code<>0:
+            sys.exit(self.UNKNOWN)
+            
+        if self.host=='':
+            doc_syntax()
+            self.exit_code=self.UNKNOWN
+            self.exit_msg='UNKNOWN: bad params, try running without any params for syntax'
+                
+
+    def CheckHost(self):
+        'Check one host using nmap.'
+        #
+        # Create a tmp file for storing nmap output
+        #
+        # The tempfile module from python 1.5.2 is stupid
+        # two processes runing at aprox the same time gets 
+        # the same tempfile...
+        # For this reason I use a random suffix for the tmp-file
+        # Still not 100% safe, but reduces the risk significally
+        # I also inserted checks at various places, so that
+        # _if_ two processes in deed get the same tmp-file
+        # the only result is a normal error message to nagios
+        #
+        r=whrandom.whrandom()
+        self.tmp_file=tempfile.mktemp('.%s')%r.randint(0,100000)
+        if self.debug:
+            print 'Tmpfile is: %s'%self.tmp_file
+        #
+        # If a range is given, only run nmap on this range
+        #
+        if self.ranges<>'':
+            global nmap_cmd # needed, to avoid error on next line
+                            # since we assigns to nmap_cmd :)
+            nmap_cmd='%s -p %s' %(nmap_cmd,self.ranges) 
+        #
+        # Prepare a task
+        #
+        t=utils.Task('%s %s' %(nmap_cmd,self.host))
+        #
+        # Configure a time-out handler
+        #
+        th=utils.TimeoutHandler(t.Kill, time_to_live=self.timeout, 
+                                debug=self.debug)
+        #
+        #  Fork of nmap cmd
+        #
+        t.Run(detach=0, stdout=self.tmp_file,stderr='/dev/null')
+        #
+        # Wait for completition, error or timeout
+        #
+        nmap_exit_code=t.Wait(idlefunc=th.Check, interval=1)
+        #
+        # Check for timeout
+        #
+        if th.WasTimeOut():
+            self.exit_code=self.CRITICAL
+            self.exit_msg='CRITICAL - Plugin timed out after %s seconds' % self.timeout
+            return
+        #
+        # Check for exit status of subprocess
+        # Must do this after check for timeout, since the subprocess
+        # also returns error if aborted.
+        #
+        if nmap_exit_code <> 0:
+            self.exit_code=self.UNKNOWN
+            self.exit_msg='nmap program failed with code %s' % nmap_exit_code
+            return
+        #
+        # Read output
+        #
+        try:
+            f = open(self.tmp_file, 'r')
+            output=f.readlines()
+            f.close()
+        except:
+            self.exit_code=self.UNKNOWN
+            self.exit_msg='Unable to get output from nmap'
+            return
+
+        #
+        # Store open ports in list
+        #  scans for lines where first word contains '/'
+        #  and stores part before '/'
+        #
+        self.active_ports=[]
+        try:
+            for l in output:
+                if len(l)<2:
+                    continue
+                s=string.split(l)[0]
+                if string.find(s,'/')<1:
+                    continue
+                p=string.split(s,'/')[0]
+                self.active_ports.append(int(p))
+        except:
+            # failure due to strange output...
+            pass
+
+        if self.debug:
+            print 'Ports found by nmap:   ',self.active_ports
+        #
+        # Filter out optional ports, we don't check status for them...
+        #
+        try:
+            for p in self.opt_ports:
+                self.active_ports.remove(p)
+            
+            if self.debug and len(self.opt_ports)>0:
+                print 'optional ports removed:',self.active_ports
+        except:
+            # under extreame loads the remove(p) above failed for me
+            # a few times, this exception hanlder handles
+            # this bug-alike situation...
+            pass
+
+        opened=self.CheckOpen() 
+        closed=self.CheckClosed()
+        
+        if opened <>'':
+            self.exit_code=self.CRITICAL
+            self.exit_msg='PORTS CRITICAL - Open:%s Closed:%s'%(opened,closed)
+        elif closed <>'':
+            self.exit_code=self.WARNING
+            self.exit_msg='PORTS WARNING - Closed:%s'%closed
+        else:
+            self.exit_code=self.OK
+            self.exit_msg='PORTS ok - Only defined ports open'
+    
+    
+    #
+    # Compares requested ports on with actually open ports
+    # returns all open that should be closed
+    #
+    def CheckOpen(self):
+        opened=''
+        for p in self.active_ports:
+            if p not in self.ports:
+                opened='%s %s' %(opened,p)
+        return opened
+        
+    #
+    # Compares requested ports with actually open ports
+    # returns all ports that are should be open
+    #
+    def CheckClosed(self):
+        closed=''
+        for p in self.ports:
+            if p not in self.active_ports:
+                closed='%s %s' % (closed,p)
+        return closed
+
+
+    def CleanUp(self):
+        #
+        # If temp file exists, get rid of it
+        #
+        if self.tmp_file<>'' and os.path.isfile(self.tmp_file):
+            try:
+                os.remove(self.tmp_file)
+            except:
+                # temp-file colition, some other process already
+                # removed the same file... 
+                pass        
+    
+        #
+        # Show numerical exits as string in debug mode
+        #
+        if self.debug:
+            print 'Exitcode:',self.exit_code,
+            if self.exit_code==self.UNKNOWN:
+                print 'UNKNOWN'
+            elif self.exit_code==self.OK:
+                print 'OK'
+            elif self.exit_code==self.WARNING:
+                print 'WARNING'
+            elif self.exit_code==self.CRITICAL:
+                print 'CRITICAL'
+            else:
+                print 'undefined'
+        #
+        # Check if invalid exit code
+        #
+        if self.exit_code<-1 or self.exit_code>2:
+            self.exit_msg=self.exit_msg+' - undefined exit code (%s)' % self.exit_code
+            self.exit_code=self.UNKNOWN
+
+
+        
+
+
+#
+# Help texts
+#
+def doc_head():
+    print """
+check_nmap plugin for Nagios
+Copyright (c) 2000 Jacob Lundqvist (jaclu@galdrion.com)
+License: GPL
+Version: %s""" % _version_
+    
+
+def doc_syntax():
+    print """
+Usage: check_ports [-v|--debug] [-H|--host host] [-V|--version] [-h|--help]
+                   [-o|--optional port1,port2,port3 ...] [-r|--range range]
+                   [-p|--port port1,port2,port3 ...] [-t|--timeout timeout]"""
+    
+
+def doc_help():
+    'Help is displayed if run without params.'
+    doc_head()
+    doc_syntax()
+    print """
+Options:
+ -h         = help (this screen ;-)
+ -v         = debug mode, show some extra output
+ -H host    = host to check (name or IP#)
+ -o ports   = optional ports that can be open (one or more),
+              no warning is given if optional port is closed
+ -p ports   = ports that should be open (one or more)
+ -r range   = port range to feed to nmap.  Example: :1024,2049,3000:7000
+ -t timeout = timeout in seconds, default 10
+ -V         = Version info
+ 
+This plugin attempts to verify open ports on the specified host.
+
+If all specified ports are open, OK is returned.
+If any of them are closed, WARNING is returned (except for optional ports)
+If other ports are open, CRITICAL is returned
+
+If possible, supply an IP address for the host address, 
+as this will bypass the DNS lookup.        
+"""
+
+
+#
+# Main
+#
+if __name__ == '__main__':
+
+    if len (sys.argv) < 2:
+        #
+        # No params given, show syntax and exit
+        #
+        doc_syntax()
+        sys.exit(-1)
+        
+    nmap=CheckNmap(sys.argv[1:])
+    exit_code,exit_msg=nmap.Run()
+    
+    #
+    # Give Nagios a msg and a code
+    #
+    print exit_msg
+    sys.exit(exit_code)
diff --git a/contrib/check_nwstat.pl b/contrib/check_nwstat.pl
new file mode 100644
index 00000000..2194640e
--- /dev/null
+++ b/contrib/check_nwstat.pl
@@ -0,0 +1,188 @@
+#!/usr/bin/perl
+#
+#  check_nwstat.pl: Nagios plugin that uses Jim Drews' nwstat.pl for
+#     MRTG instead of emulating it.  For use particularly with Cliff
+#     Woolley's mrtgext.pl Unix companion to Drews' MRTGEXT.NLM, where
+#     mrtgext.pl can contain custom commands that check_nwstat won't recognize,
+#     though this also does its best to perfectly emulate the C version
+#     of check_nwstat.
+#
+
+
+######################################################################
+#  Configuration
+######################################################################
+
+$nwstatcmd = "/apps/mrtg/helpers/nwstat.pl";
+
+use Getopt::Long;
+
+$::host      = shift || &usage(%ERROR);
+$::opt_v     = undef;
+$::opt_wv    = undef;
+$::opt_cv    = undef;
+$::opt_to    = 10;
+$::opt_url   = undef;
+
+GetOptions (qw(v=s wv=i cv=i to=i url=s)) || &usage(%ERROR);
+
+my $cmd1     = "";
+my $cmd2     = "ZERO";
+my $backward = 0;
+my $desc     = "";
+my $okstr    = "OK";
+my $probstr  = "Problem";
+my $result   = "";
+my @CMD;
+my %ERROR    = ("UNKNOWN"   => -1,
+                "OK"        =>  0,
+                "WARNING"   =>  1,
+                "CRITICAL"  =>  2);
+my $status   = $ERROR{"OK"};
+
+
+######################################################################
+#  Main program
+######################################################################
+
+$SIG{'ALRM'} = sub { 
+    print "Connection timed out\n";
+    exit $ERROR{"CRITICAL"};
+};
+
+# translate table for compatability with
+# check_nwstat (C version)
+SWITCH: for ($::opt_v) {
+           /^LOAD(1|5|15)$/
+                       && do { $desc = "Load <status> - Up <cmd2>, ".
+                                       "$1-min load average = <cmd0>%";
+                               $cmd1 = "UTIL$1";  last; };
+           /^CONNS$/   && do { $desc = "Conns <status>: ".
+                                       "<cmd0> current connections";
+                               $cmd1 = "CONNECT"; last; };
+           /^CDBUFF$/  && do { $desc = "Dirty cache buffers = <cmd0>";
+                               $cmd1 = "S3";      last; };
+           /^LTCH$/    && do { $desc = "Long term cache hits = <cmd0>%";
+                               $cmd1 = "S1";
+                               $backward = 1;     last; };
+           /^CBUFF$/   && do { $desc = "Total cache buffers = <cmd0>";
+                               $cmd1 = "S2";
+                               $backward = 1;     last; };
+           /^LRUM$/    && do { $desc = "LRU sitting time = <cmd0> minutes";
+                               $cmd1 = "S5";
+                               $backward = 1;     last; };
+           /^VPF(.*)$/ && do { $desc = "<status><int(cmd0/1024)> MB ".
+                                       "(<result>%) free on volume $1";
+                               $okstr = ""; $probstr = "Only ";
+                               $cmd1 = "VKF$1";
+                               $cmd2 = "VKS$1";
+                               $backward = 1;     last; };
+           /^VKF/      && do { $desc = "<status><cmd0> KB free on volume $1";
+                               $okstr = ""; $probstr = "Only ";
+                               $cmd1 = "$::opt_v";
+                               $backward = 1;     last; };
+           /^$/        && die "Nothing to check!";
+           $desc = "<status>: <cmd0>";
+           $cmd1 = "$::opt_v";
+        }
+
+
+# begin timeout period, run the check
+alarm($::opt_to);
+open  ( CMD, "$nwstatcmd $host $cmd1 $cmd2|" ) || die "Couldn't execute nwstat";
+@CMD = <CMD>;
+close ( CMD );
+alarm(0);
+
+for (@CMD) { chomp; }
+
+# for any variables that manipulate the results instead of
+# just using <cmd0> directly, do that manipulation here into <result>
+SWITCH: for ($::opt_v) {
+           /^VPF/       && do { $result=int(("$CMD[0]"/"$CMD[1]")*100); last; };
+           $result = "$CMD[0]";
+        }
+
+if ("$result" == -1) {
+   $status = $ERROR{"UNKNOWN"};
+   $desc = "Server returned \"variable unknown\"";
+} elsif ("$result" == -2) {
+   $status = $ERROR{"CRITICAL"};
+   $desc = "Connection failed";
+}
+
+if (defined($::opt_cv) && $status == $ERROR{"OK"}) {
+   if ($backward) {
+      ("$result" <= "$::opt_cv") && ( $status = $ERROR{"CRITICAL"} );
+   } else {
+      ("$result" >= "$::opt_cv") && ( $status = $ERROR{"CRITICAL"} );
+   }
+}
+if (defined($::opt_wv) && $status == $ERROR{"OK"}) {
+   if ($backward) {
+      ("$result" <= "$::opt_wv") && ( $status = $ERROR{"WARNING"} );
+   } else {
+      ("$result" >= "$::opt_wv") && ( $status = $ERROR{"WARNING"} );
+   }
+}
+
+$desc =~ s/<status>/($status == $ERROR{"OK"})?"$okstr":"$probstr"/eg;
+$desc =~ s/<([^>]*)cmd([0-3])([^>]*)>/eval("$1\"$CMD[$2]\"$3")/eg;
+$desc =~ s/<result>/"$result"/eg;
+
+if (defined($::opt_url)) {
+   print "<A HREF=\"$::opt_url\">$desc</A>\n";
+} else {
+   print "$desc\n";
+}
+exit $status;
+
+
+######################################################################
+#  Subroutines
+######################################################################
+
+sub usage {
+
+    %ERROR = shift;
+
+    print <<EOF
+check_nwstat.pl plugin for Nagios
+by Cliff Woolley, (c) 2000
+
+Usage: ./check_nwstat.pl <host_address> [-v variable] [-wv warn_value] [-cv crit_value] [-to to_sec] [-url url_value]
+
+Options:
+ [variable]   = Variable to check.  Valid variables include:
+                  LOAD1    = 1 minute average CPU load
+                  LOAD5    = 5 minute average CPU load
+                  LOAD15   = 15 minute average CPU load
+                  CONNS    = number of currently licensed connections
+                  VPF<vol> = percent free space on volume <vol>
+                  VKF<vol> = KB of free space on volume <vol>
+                  LTCH     = percent long term cache hits
+                  CBUFF    = current number of cache buffers
+                  CDBUFF   = current number of dirty cache buffers
+                  LRUM     = LRU sitting time in minutes
+ [warn_value] = Threshold for value necessary to result in a warning status
+ [crit_value] = Threshold for value necessary to result in a critical status
+ [to_sec]     = Number of secs before connection times out - default is 10 sec
+ [url_value]  = URL to use in output as a hyperlink.  Useful to link to a page
+                with more details or history for this variable (ie an MRTG page)
+
+This plugin attempts to contact the MRTGEXT NLM running on a Novell server
+to gather the requested system information.
+
+Notes:
+ - This plugin requres that the MRTGEXT.NLM file distributed with
+   James Drews' MRTG extension for NetWare (available from
+   http://www.engr.wisc.edu/~drews/mrtg/) be loaded on the Novell
+   servers you wish to check.
+ - Critical thresholds should be lower than warning thresholds when
+   the following variables are checked: VPF, VKF, LTCH, CBUFF, and LRUM.
+EOF
+;
+
+    exit $ERROR{"UNKNOWN"};
+}
+
diff --git a/contrib/check_ora_table_space.pl b/contrib/check_ora_table_space.pl
new file mode 100644
index 00000000..24497b24
--- /dev/null
+++ b/contrib/check_ora_table_space.pl
@@ -0,0 +1,82 @@
+#!/usr/bin/perl
+#
+# Program check_ora_table_space
+# Written by: Erwan Arzur (erwan@netvalue.com)
+# License: GPL
+#
+# Last Modified: $Date$
+# Revisiin: $Revision$
+#
+# "check_ora_table_space.pl" plugin to check the state of Oracle 
+# table spaces. Scarce documentation.
+#
+# you need DBD-Oracle-1.03.tar.gz and DBI-1.13.tar.gz from CPAN.org as
+# well as some Oracle client stuff to use it.
+#
+# The SQL request comes from www.dbasupport.com
+#
+
+use DBI;
+$ENV{"ORACLE_HOME"}="/intranet/apps/oracle";
+
+my $host = shift || &usage ("no host specified");
+my $sid  = shift || &usage ("no sid specified");
+my $port = shift || &usage ("no port specified");
+my $dbuser = shift || &usage ("no user specified");
+my $dbpass = shift || &usage ("no password specified");
+my $tablespace = shift || &usage ("no table space  specified");
+
+my $alertpct = int(shift) || &usage ("no warning state percentage specified");
+my $critpct =  int(shift) || &usage ("no critical state percentage specified");
+
+my $dbh = DBI->connect( "dbi:Oracle:host=$host;port=$port;sid=$sid", $dbuser, $dbpass, { PrintError => 0, AutoCommit => 1, RaiseError => 0 } )
+        || &error ("cannot connect to $dbname: $DBI::errstr\n");
+
+#$sth = $dbh->prepare(q{SELECT tablespace_name, SUM(BYTES)/1024/1024 FreeSpace FROM dba_free_space group by tablespace_name}) 
+my $exit_code = -1;
+$sth = $dbh->prepare(<<EOF
+select a.TABLESPACE_NAME, a.total,nvl(b.used,0) USED, 
+nvl((b.used/a.total)*100,0) PCT_USED 
+from (select TABLESPACE_NAME, sum(bytes)/(1024*1024) total 
+from sys.dba_data_files group by TABLESPACE_NAME) a, 
+(select TABLESPACE_NAME,bytes/(1024*1024) used from sys.SM\$TS_USED) b 
+where  a.TABLESPACE_NAME='$tablespace' and 
+ a.TABLESPACE_NAME=b.TABLESPACE_NAME(+)
+EOF
+)
+        || &error("Cannot prepare request : $DBI::errstr\n");
+$sth->execute 
+        || &error("Cannot execute request : $DBI::errstr\n");
+
+while (($tbname, $total, $used, $pct_used) = $sth->fetchrow)
+{
+        $pct_used=int($pct_used);
+        print STDOUT "size: " . $total . " MB Used:" . int($used) . " MB (" . int($pct_used) . "%)\n";
+        #print "table space $answer\n";
+        if ($pct_used > $alertpct) {
+                if ($pct_used > $critpct) {
+                        $exit_code = 2
+                } else {
+                        $exit_code = 1;
+                }
+        } else {
+                $exit_code = 0; 
+        }
+}
+
+$rc = $dbh->disconnect 
+        || &error ("Cannot disconnect from database : $dbh->errstr\n");
+
+exit ($exit_code);
+
+sub usage {
+        print "@_\n" if @_;
+        print "usage : check_ora_table_space.pl <host> <sid> <port> <user> <passwd> <tablespace> <pctwarn> <pctcrit>\n";
+        exit (-1);
+}
+
+sub error {
+        print "@_\n" if @_;
+        exit (2);
+}
+
diff --git a/contrib/check_pop3.pl b/contrib/check_pop3.pl
new file mode 100644
index 00000000..c0c2712c
--- /dev/null
+++ b/contrib/check_pop3.pl
@@ -0,0 +1,144 @@
+#!/usr/bin/perl
+# ------------------------------------------------------------------------------
+# File Name:            check_pop3.pl
+# Author:               Richard Mayhew - South Africa
+# Date:                 2000/01/21
+# Version:              1.0
+# Description:          This script will check to see if an POP3 is running
+#                       and whether authentication can take place.
+# Email:                netsaint@splash.co.za
+# ------------------------------------------------------------------------------
+# Copyright 1999 (c) Richard Mayhew
+# Credits go to Ethan Galstad for coding Nagios
+# If any changes are made to this script, please mail me a copy of the
+# changes :)
+# License GPL
+# ------------------------------------------------------------------------------
+# Date          Author          Reason
+# ----          ------          ------
+# 1999/09/20    RM              Creation
+# 1999/09/20    TP              Changed script to use strict, more secure by
+#                               specifying $ENV variables. The bind command is
+#                               still insecure through.  Did most of my work
+#                               with perl -wT and 'use strict'
+# 2000/01/20    RM              Corrected POP3 Exit State.
+# 2000/01/21    RM              Fix Exit Codes Again!!
+# ------------------------------------------------------------------------------
+
+# -----------------------------------------------------------------[ Require ]--
+require 5.004;
+
+# --------------------------------------------------------------------[ Uses ]--
+use Socket;
+use strict;
+
+# --------------------------------------------------------------[ Enviroment ]--
+$ENV{PATH} = "/bin";
+$ENV{BASH_ENV} = "";
+$|=1;
+# ------------------------------------------------------------------[ Global ]--
+my $TIMEOUT = 60;
+        
+# -------------------------------------------------------------------[ usage ]--
+sub usage
+{
+        print "Minimum arguments not supplied!\n";
+        print "\n";
+        print "Perl Check POP3 plugin for Nagios\n";
+        print "Copyright (c) 2000 Richard Mayhew\n";
+        print "\n";
+        print "Usage: check_pop3.pl <host> <username> <password> [port]\n";
+        print "\n";
+        print "<port> = Port that the pop3 daemon is running on <host>. Defaults to 110.\n";
+        exit -1;
+
+}
+
+# --------------------------------------------------------------[ bindRemote ]--
+sub bindRemote
+{
+        my ($in_remotehost, $in_remoteport, $in_hostname) = @_;
+        my $proto;
+        my $sockaddr;
+        my $this;
+        my $thisaddr;
+        my $that;
+        my ($name, $aliases,$type,$len,$thataddr) = gethostbyname($in_remotehost);
+
+        if (!socket(ClientSocket,AF_INET, SOCK_STREAM, $proto)) { die $!; }
+        $sockaddr = 'S n a4 x8';
+        $this = pack($sockaddr, AF_INET, 0, $thisaddr);
+        $that = pack($sockaddr, AF_INET, $in_remoteport, $thataddr);
+        if (!bind(ClientSocket, $this)) { print "Connection Refused"; exit 2; }
+        if (!connect(ClientSocket, $that)) { print "Connection Refused"; exit 2; }
+        select(ClientSocket); $| = 1; select(STDOUT);
+        return \*ClientSocket;
+}
+
+# ====================================================================[ MAIN ]==
+MAIN:
+{
+        my $hostname;
+        my $remotehost = shift || &usage;
+        my $username = shift || &usage;
+        my $password = shift || &usage;
+        my $remoteport = shift || 110;
+
+        # Just in case of problems, let's not hang Nagios
+        $SIG{'ALRM'} = sub {
+                print "Something is Taking a Long Time, Increase Your TIMEOUT (Currently Set At $TIMEOUT Seconds)\n";
+                exit -1;
+        };
+        
+        alarm($TIMEOUT);
+
+        chop($hostname = `hostname`);
+        my ($name, $alias, $proto) = getprotobyname('tcp');
+        my $ClientSocket = &bindRemote($remotehost,$remoteport,$hostname);
+        
+
+print ClientSocket "user $username\n";
+
+#Debug Server
+#print "user $username\n";
+
+#Sleep or 3 secs, incase server is slow.
+sleep 3;
+
+print ClientSocket "pass $password\n";
+
+#Debug Server
+#print "pass $password\n";
+
+while (<ClientSocket>) {
+
+print ClientSocket "pass $password\n";
+
+#Debug Server
+#print $_;
+
+err($_) if (m/\-ERR\s+(.*)\s+.*/);
+message($_) if (m/\+OK Mailbox open,\s+(.*\d)\s+messages.*/);
+}
+}
+
+sub message 
+{
+        my $answer = "UNKNOWN";
+        $answer = "Pop3 OK - Total Messages On Server :- $1";   
+        alarm(0);
+        print ClientSocket "quit\n";
+        print "$answer";
+        exit 0;
+}
+
+sub err
+{
+        my $answer = "UNKNOWN";
+        $answer = "Pop3 Error :- $1";
+        alarm(0);
+        print ClientSocket "quit\n";
+        print "$answer";
+        exit 2;
+}
+
diff --git a/contrib/check_qmailq.pl b/contrib/check_qmailq.pl
new file mode 100755
index 00000000..4c3f68ff
--- /dev/null
+++ b/contrib/check_qmailq.pl
@@ -0,0 +1,121 @@
+#!/usr/bin/perl 
+#
+# check_qmailq.pl - nagios plugin 
+# This plugin allows you to check the number of Mails in a qmail-
+# queue. PLUGIN NEEDS CONFIGURATION ! (see below) 
+#
+# Copyright 2000 Benjamin Schmid
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+#
+# Emergency E-Mail :) blueshift@gmx.net
+#
+
+### CONFIGURATION SECTION ####################
+
+my $statcommand  = "/var/qmail/bin/qmail-qstat";
+my $queuewarn = 5;      # Warning, if more than x mail in Queue
+my $queuecrit = 10;     # Critical if "--"
+my $prewarn = 1;        # Warning, if more than x unhandled mails 
+                        # (not in Queue
+my $precrit = 5;        # Critical, if  "--"
+
+### CONFIURATION SECTION END ################
+
+use strict;
+use Carp;
+
+#use Getopt::Long;
+#&Getopt::Long::config('auto_abbrev');
+
+
+
+my $TIMEOUT = 15;
+
+my %ERRORS = ('UNKNOWN' , '-1',
+              'OK' , '0',
+              'WARNING', '1',
+              'CRITICAL', '2');
+
+my $state = "UNKNOWN";
+my $answer = "";
+
+#sub usage {
+#  printf "\nMissing arguments!\n";
+#  printf "\n";
+#  printf "Printer Server Queue Nagios Plugin\n";
+#  printf "monitors jobs in lpr queues\n";
+#  printf "usage: \n";
+#  printf "check_lpq.pl \n";
+#  printf "Copyright (C) 2000 Benjamin Schmid\n";
+#  printf "check_lpq.pl comes with ABSOLUTELY NO WARRANTY\n";
+#  printf "This programm is licensed under the terms of the ";
+#  printf "GNU General Public License\n(check source code for details)\n";
+#  printf "\n\n";
+#  exit $ERRORS{"UNKNOWN"};
+#}
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+     print ("ERROR: check_lpq.pl Time-Out $TIMEOUT s \n");
+     exit $ERRORS{"UNKNOWN"};
+};
+alarm($TIMEOUT);
+
+
+#$status = GetOptions("community=s",\$community,
+#                     "port=i",\$port);
+#if ($status == 0)
+#{
+#        &usage;
+#}
+  
+#   $hostname  = shift || &usage;
+
+if (! open STAT, "$statcommand|") {
+  print ("$state: $statcommand returns no result!");
+  exit $ERRORS{$state};
+}
+my @lines = <STAT>;
+close STAT;
+
+# Mails in Queues
+if ($lines[0]=~/^messages in queue: (\d+)/) {
+  my $anzq = $1;
+  $answer = $answer . "$anzq";
+  $state='WARNING' if ($anzq >= $queuewarn);
+  $state='CRITICAL' if ($anzq >= $queuecrit);
+} else {
+  $state='CRITICAL';
+  $answer="Keine gueltigte Antwort (Zeile #1) von $statcommand\n";
+}
+
+# Unverarbeite Mails
+if ($lines[1]=~/^messages in queue but not yet preprocessed: (\d+)/) {
+  my $anzp = $1;
+  $answer = $answer . " E-Mail(s) nicht ausgeliefert, $anzp unverarbeitet.";
+  $state='WARNING' if ($anzp >= $prewarn && $state eq 'UNKNOWN');
+  $state='CRITICAL' if ($anzp >= $precrit);
+} else {
+  $state='CRITICAL';
+  $answer=$answer . "Keine gueltigte Antwort (Zeile #2) von $statcommand\n";
+}
+
+$state = 'OK' if ($state eq 'UNKNOWN');
+
+print ("$state: $answer\n");
+exit $ERRORS{$state};
+
diff --git a/contrib/check_rrd_data.pl b/contrib/check_rrd_data.pl
new file mode 100644
index 00000000..0ff8750b
--- /dev/null
+++ b/contrib/check_rrd_data.pl
@@ -0,0 +1,129 @@
+#!/usr/bin/perl -wT
+
+# check_rrd_data plugin for nagios
+#
+# usage:
+#    check_rrd machine_id perlexp_warn perlexp_crit perlexp_default [ds]
+#
+# Checks data from a RRD file. machine_id is normally an IP address, that has
+# to be mapped to a RRD file, by means of the config file (by default
+# /var/spool/nagios/rrd-files, a file with pairs of (machine_id,rrd_file),
+# separated by whitespace). It can be a RRD file, too.
+#
+# The Perl expressions are expressions to be evaluated in the following cases:
+#
+# - perlexp_crit. The first one, to check if there is a critical situation. If
+# it returns other than "", it will be a critical message.
+# - perlexp_warn. The second one to be evaluated. If returns other than "", a
+# warning will be issued to Nagios.
+# - perlexp_default. If both of the above return "", it will be evaluated, and
+# wathever returns this expression will be returned by the script. NOTE that
+# this is different from the other two cases, to allow the user issue a
+# warning or critical failure even if the other two don't return it.
+#
+# Use these hosts.cfg entries as examples
+#
+# command[check_ping]=$USER1$/check_rrd_data.pl $HOSTADDRESS$ \
+#       'return "CHECK_CRICKET_PING: Warning\n" if ($value > 10);' 'return \
+#       "CHECK_CRICKET_PING: Critical\n" if ($value > 100);' 'printf \
+#       "PING OK - RTA = %.2fms\n", $value; return 0;' 1
+# service[machine]=PING;0;24x7;3;5;1;router-admins;240;24x7;1;1;1;;check_ping
+#
+# initial version: 28 Nov 2000 by Esteban Manchado Velázquez
+# current status: 0.1
+#
+# Copyright Notice: GPL
+#
+
+# Doesn't work! Why?
+# BEGIN {
+        # my $runtimedir = substr($0,0,rindex($0,'/'));
+        # require "$runtimedir/utils.pm";
+# }
+
+require '/usr/libexec/nagios/plugins/utils.pm';
+use RRD::File;
+# use strict;                   # RRD:File and utils.pm don't like this
+
+my $configfilepath = "/var/spool/nagios/rrd-files";     # Change if needed
+my %hostfile;                                           # For storing config
+my $rrdfile;                                            # RRD file to open
+
+$ENV{'PATH'} = "/bin:/usr/bin";
+$ENV{'ENV'} = "";
+
+if (scalar @ARGV != 4 && scalar @ARGV != 5) {
+        print STDERR join "' '", @ARGV, "\n";
+        my $foo = 'check_rrd_data';
+        print STDERR $foo, " <file.rrd> <perl_exp_warn> <perl_exp_crit> <perl_exp_default> [<ds>]\n\n";
+        print STDERR "<perl_exp_*> is an expression that gets evaluated with \$_ at the current\n";
+        print STDERR "value of the data source. If it returns something other than \"\", there\n";
+        print STDERR "will be a warning or a critical failure. Else, the expression\n";
+        print STDERR "<perl_exp_default> will be evaluated\n";
+        exit;
+}
+
+# Check configuration file
+open F, $configfilepath or do {
+        print "Can't open config file $configfilepath\n";
+        return $ERRORS{'UNKNOWN'};
+};
+while (<F>) {
+        next unless /(.+)\s+(.+)/;
+        $hostfile{$1} = $2;
+}
+close F;
+
+# Default
+my $ds = defined $ARGV[4]?$ARGV[4]:0;
+        # print "\$ds = " . $ds . ":";
+        # print "\$ARGV[4] = " . $ARGV[4] . ":";
+$ds =~ s/\$//g;         # Sometimes Nagios gives 1$ as the last parameter
+
+# Guess which RRD file have to be opened
+$rrdfile = $ARGV[0] if (-r $ARGV[0]);           # First the parameter
+$rrdfile = $hostfile{$ARGV[0]} unless $rrdfile; # Second, the config file
+        # print "$ARGV[0]:";
+
+if (! $rrdfile) {
+        print "Can't open data file for $ARGV[0]\n";    # Aaaargh!
+        return $ERRORS{'UNKNOWN'};      # Unknown
+}
+
+        # print "Opening file $rrdfile:";
+my $rrd = new RRD::File ( -file => $rrdfile );
+$rrd->open();
+if (! $rrd->loadHeader()) {
+        print "Couldn't read header from $rrdfile\n";
+        exit $ERRORS{'UNKNOWN'};        # Unknown
+}
+my $value = $rrd->getDSCurrentValue($ds);
+$rrd->close();
+
+# Perl expressions to evaluate
+my ($perl_exp_warn, $perl_exp_crit, $perl_exp_default) =
+                ($ARGV[1], $ARGV[2], $ARGV[3]);
+my $result;     # Result of the expressions (will be printed)
+my @data;       # Special data reserved for the expressions, to pass data
+
+# First check for critical errors
+$perl_exp_crit =~ /(.*)/;
+$perl_exp_crit = $1;
+$result = eval $perl_exp_crit;
+if ($result) {
+        print $result;
+        exit 2;         # Critical
+}
+
+# Check for warnings
+$perl_exp_warn =~ /(.*)/;
+$perl_exp_warn = $1;
+$result = eval $perl_exp_warn;
+if ($result) {
+        print $result;
+        exit 1;         # Warning
+}
+
+$perl_exp_default =~ /(.*)/;
+$perl_exp_default = $1;
+eval $perl_exp_default; # Normally returns 0 (OK)
diff --git a/contrib/check_sap.sh b/contrib/check_sap.sh
new file mode 100755
index 00000000..eadf977e
--- /dev/null
+++ b/contrib/check_sap.sh
@@ -0,0 +1,70 @@
+#!/bin/sh 
+################################################################################ 
+# 
+# CHECK_SAP plugin for Nagios 
+# 
+# Written by Karel Salavec (karel.salavec@ct.cz) 
+# Last Modified: 20Apr2000 
+# 
+# Command line: CHECK_SAP <typ_of_check> <param1> <param2> [<param3>] 
+# 
+# Description: 
+# This plugin will attempt to open an SAP connection with the message 
+# server or application server. 
+#  It need the sapinfo program installed on your server (see Notes). 
+# 
+#  Notes: 
+#   - This plugin requires that the saprfc-devel-45A-1.i386.rpm (or higher) 
+#     package be installed on your machine. Sapinfo program 
+#     is a part of this package. 
+#   - You can find this package at SAP ftp server in 
+#    /general/misc/unsupported/linux 
+# 
+# 
+#  Parameters: 
+#  $1 - type of checking - valid values: "ms" = message server 
+#                                        "as" = application server 
+#  $2 - SAP server identification - can be IP address, DNS name or SAP 
+#       connect string (for example: /H/saprouter/S/sapdp01/H/sapserv3) 
+#  $3 - for $1="ms" - SAP system name (for example: DEV, TST, ... ) 
+#       for $1="as" - SAP system number - note: central instance have sysnr=00 
+#  $4 - valid only for $1="ms" - logon group name - default: PUBLIC 
+# 
+#  Example of command definitions for nagios: 
+# 
+#  command[check_sap_ms]=/usr/local/nagios/libexec/check_sap ms $HOSTADDRESS$ $ARG1$ $ARG2$ 
+#  command[check_sap_as]=/usr/local/nagios/libexec/check_sap as $HOSTADDRESS$ $ARG1$ 
+#  command[check_sap_ex]=/usr/local/nagios/libexec/check_sap as $ARG1$ $ARG2$ 
+#                        (for ARG1 see SAP OOS1 transaction) 
+#
+##############################################################################
+
+if [ $# -lt 3 ]; then
+echo "Need min. 3 parameters"
+exit 2
+fi
+
+case "$1"
+  in
+    ms)
+        if [ $4 ]
+          then
+            params="r3name=$3 mshost=$2 group=$4"
+        else
+          params="r3name=$3 mshost=$2"
+        fi
+        ;;
+    as)
+        params="ashost=$2 sysnr=$3"
+        ;;
+    *)
+        echo "The first parametr must be ms (message server) or as (application server)!"
+        exit 2
+        ;;
+esac
+
+if /usr/sap/rfcsdk/bin/sapinfo $params | grep -i ERROR ; then
+exit 2
+else
+exit 0
+fi
diff --git a/contrib/check_sockets.pl b/contrib/check_sockets.pl
new file mode 100644
index 00000000..b8ae24a2
--- /dev/null
+++ b/contrib/check_sockets.pl
@@ -0,0 +1,145 @@
+#! /usr/bin/perl
+# ------------------------------------------------------------------------------
+# File Name:            check_sockets.pl
+# Author:               Richard Mayhew - South Africa
+# Date:                 2000/07/11
+# Version:              1.0
+# Description:          This script will check to see how may open sockets
+#                       a server has and waron respectivly
+# Email:                netsaint@splash.co.za
+# ------------------------------------------------------------------------------
+# Copyright 1999 (c) Richard Mayhew
+# Credits go to Ethan Galstad for coding Nagios
+# If any changes are made to this script, please mail me a copy of the
+# changes :)
+# Some code taken from Charlie Cook (check_disk.pl)
+# License GPL
+#
+# ------------------------------------------------------------------------------
+# Date          Author          Reason
+# ----          ------          ------
+# 1999/09/20    RM              Creation
+# 1999/09/20    TP              Changed script to use strict, more secure by
+#                               specifying $ENV variables. The bind command is
+#                               still insecure through.  Did most of my work
+#                               with perl -wT and 'use strict'
+#
+# ------------------------------------------------------------------------------
+
+# -----------------------------------------------------------------[ Require ]--
+require 5.004;
+# --------------------------------------------------------------------[ Uses ]--
+use Socket;
+use strict;
+# --------------------------------------------------------------[ Enviroment ]--
+$ENV{'PATH'}='/bin:/sbin:/usr/bin:/usr/sbin';
+$ENV{BASH_ENV} = "";
+# ------------------------------------------------------------------[ Global ]--
+my $TIMEOUT = 20;
+my %ERRORS = (
+        'UNKNOWN', '-1',
+        'OK', '0',
+        'WARNING', '1',
+        'CRITICAL', '2');
+# --------------------------------------------------------------[ connection ]--
+sub connection
+{
+        my ($in_total,$in_warn,$in_crit,$in_high) = @_;
+        my $state;
+        my $answer;
+
+        $in_total =~ s/\ //g;
+        if ($in_total >= 0) {
+
+                if ($in_total > $in_crit) {
+                        $state = "CRITICAL";
+                        $answer = "Critical Number Of Sockets Connected : $in_total (Limit = $in_crit)\n";
+
+                } elsif ($in_total > $in_warn) {
+                        $state = "WARNING";
+                        $answer = "Warning Number Of Sockets Connected : $in_total (Limit = $in_warn)\n";
+
+                } else {
+                        if ($in_high ne "") {
+                        $answer = "Sockets OK - Current Sockets: $in_total : $in_high\n";
+                        }
+                        if ($in_high eq "") {
+                        $answer = "Sockets OK - Current Sockets: $in_total\n";
+                        }
+                        $state = "OK";
+                        }
+
+        } else {
+                $state = "UNKNOWN";
+                $answer = "Something is Really WRONG! Sockets Is A Negative Figure!\n";
+        }
+        
+        print $answer;
+        exit $ERRORS{$state};
+}
+
+# -------------------------------------------------------------------[ usage ]--
+sub usage
+{
+        print "Minimum arguments not supplied!\n";
+        print "\n";
+        print "Perl Check Sockets plugin for Nagios\n";
+        print "Copyright (c) 2000 Richard Mayhew\n";
+        print "\n";
+        print "Usage: check_sockets.pl <type> <warn> <crit>\n";
+        print "\n";
+        print "<type> = TOTAL, TCP, UDP, RAW.\n";
+        print "<warn> = Number of sockets connected at which a warning message will be generated.[Default = 256]\n";
+        print "<crit> = Number of sockets connected at which a critical message will be generated.[Default = 512]\n";
+        exit $ERRORS{"UNKNOWN"};
+
+}
+
+# ====================================================================[ MAIN ]==
+MAIN:
+{
+        my $type = shift || &usage;
+        my $warn = shift || 256;
+        my $crit = shift || 512;
+        my $data;       
+        my @data;
+        my $line;
+        my $data1;
+        my $data2;
+        my $data3;
+        my $junk;
+        my $total1;
+        my $total2;
+        $type = uc $type;
+        if ($type eq "TOTAL") {
+        $type = "sockets";
+        }
+
+        # Just in case of problems, let's not hang Nagios
+        $SIG{'ALRM'} = sub {
+                print "Somthing is Taking a Long Time, Increase Your TIMEOUT (Currently Set At $TIMEOUT Seconds)\n";
+                exit $ERRORS{"UNKNOWN"};
+        };
+
+        $data = `/bin/cat /proc/net/sockstat`;
+        @data = split("\n",$data);
+        alarm($TIMEOUT);
+        my $output = "";
+        my $high;
+
+
+        foreach $line (@data) {
+                if ($line =~ /$type/) {
+                ($data1,$data2,$data3) = split(" ",$line,3);    
+
+                        if ($data3 =~ /highest/){
+                        ($total1,$junk,$total2) = split(" ",$data3,3);  
+                        $output = $total1;
+                        $high = $total2;
+                        }
+                        else {$output = $data3;}
+        alarm(0);
+        connection($output,$warn,$crit,$high);
+                }
+        }
+}
diff --git a/contrib/check_timeout.c b/contrib/check_timeout.c
new file mode 100644
index 00000000..858bdfe9
--- /dev/null
+++ b/contrib/check_timeout.c
@@ -0,0 +1,55 @@
+/*****************************************************************************
+ *
+ * CHECK_TIMEOUT.C
+ *
+ * Program: Plugin timeout tester for Nagios
+ * License: GPL
+ * Copyright (c) 1999 Ethan Galstad (nagios@nagios.org)
+ *
+ * Last Modified: 01-10-2000
+ *
+ * Command line: CHECK_TIMEOUT <something..>
+ *
+ * Description:
+ * This 'plugin' - if you want to call it that - doesn't do anything.  It
+ * just stays in a loop forever and never exits, and is therefore useful for
+ * testing service and host check timeouts in Nagios.  You must supply at
+ * least one argument on the command line in order to activate the loop.
+ *
+ ****************************************************************************/
+
+#include <stdio.h>
+#include <unistd.h>
+
+
+int main(int argc, char **argv){
+
+        if(argc==1){
+                printf("Incorrect arguments supplied\n");
+                printf("\n");
+                printf("Plugin timeout tester for Nagios\n");
+                printf("Copyright (c) 1999 Ethan Galstad (nagios@nagios.org)\n");
+                printf("Last Modified: 01-10-2000\n");
+                printf("License: GPL\n");
+                printf("\n");
+                printf("Usage: %s <something>\n",argv[0]);
+                printf("\n");
+                printf("Options:\n");
+                printf(" <something> = Anything at all...\n");
+                printf("\n");
+                printf("Notes:\n");
+                printf("This 'plugin' doesn't do anything.  It is designed to never exit and therefore\n");
+                printf("provides an easy way of testing service and host check timeouts in Nagios.\n");
+                printf("\n");
+                return 0;
+                }
+
+        /* let's never leave here, okay? */
+        while(1)
+                sleep(1);
+
+        return 0;
+        }
+
+
+
diff --git a/contrib/check_uptime.c b/contrib/check_uptime.c
new file mode 100644
index 00000000..46a1b826
--- /dev/null
+++ b/contrib/check_uptime.c
@@ -0,0 +1,99 @@
+/******************************************************************************
+ *
+ * CHECK_UPTIME.C
+ *
+ * Program: Uptime plugin for Nagios
+ * License: GPL
+ * Copyright (c) 2000 Teresa Ramanan (teresa@redowl.org)
+ *
+ * Based on CHECK_LOAD.C
+ * Copyright (c) 1999 Felipe Gustavo de Almeida <galmeida@linux.ime.usp.br>
+ *
+ * Last Modified: $Date$
+ *
+ * Command line: CHECK_UPTIME <host_address>
+ * 
+ * Description:
+ *
+ * This plugin parses the output from "uptime", tokenizing it with ',' as the
+ * delimiter. Returning only the number of days and/or the hours and minutes
+ * a machine has been up and running.
+ *
+ *****************************************************************************/
+
+#include "common/config.h"
+#include "common/common.h"
+#include "common/utils.h"
+#include "common/popen.h"
+
+int main(int argc, char **argv)
+{
+
+  int result;
+  char input_buffer[MAX_INPUT_BUFFER];
+  int ct;
+  int i;
+  char *tok1 = NULL;
+  char *daytok = NULL;
+  char *hrmintok = NULL;
+  char *runstr = NULL;
+  char tempp;
+  char ch;
+  char delim[] = ",";
+
+  if(argc != 2){
+    printf("Incorrect number of arguments supplied\n");
+    printf("\n");
+    print_revision(argv[0],"$Revision$");
+    printf("Copyright (c) 2000 Teresa Ramanan (tlr@redowl.org)\n");
+    printf("\n");
+    printf("Usage: %s <host_address>\n",argv[0]);
+    printf("\n");
+    return STATE_UNKNOWN;
+  }
+
+  child_process = spopen(PATH_TO_UPTIME);
+  if(child_process==NULL){
+      printf("Error opening %s\n",PATH_TO_UPTIME);
+      return STATE_UNKNOWN;
+  }
+  child_stderr=fdopen(child_stderr_array[fileno(child_process)],"r");
+  if(child_stderr==NULL){
+    printf("Could not open stderr for %s\n",PATH_TO_UPTIME);
+  }
+  fgets(input_buffer,MAX_INPUT_BUFFER-1,child_process);
+  i = 0;
+  ct = 0;
+
+  /* Let's mark the end of this string for parsing purposes */
+  input_buffer[strlen(input_buffer)-1]='\0';
+
+  tempp = input_buffer[0];
+  while(ch != '\0'){
+    ch = (&tempp)[i];
+    if (ch == ',') { ct++; }
+    i++;
+  }
+  runstr = input_buffer;
+  tok1 = strsep(&runstr, delim);
+  if (ct > 4) {
+    hrmintok = strsep(&runstr, delim);
+    hrmintok++;
+    daytok = strstr(tok1,"up");
+  }
+  else {
+    hrmintok = strstr(tok1, "up");
+  }
+
+  result = spclose(child_process);
+  if(result){
+    printf("Error code %d returned in %s\n",result,PATH_TO_UPTIME);
+    return STATE_UNKNOWN;
+  }
+  if (hrmintok == NULL) {
+    printf("Problem - unexpected data returned\n");
+    return STATE_UNKNOWN;
+  }
+  printf("%s%s%s\n",(daytok == NULL)?"":daytok,(daytok == NULL)?"":",",hrmintok);
+  return STATE_OK;
+}
diff --git a/contrib/checkciscotemp.pl b/contrib/checkciscotemp.pl
new file mode 100644
index 00000000..a702a89e
--- /dev/null
+++ b/contrib/checkciscotemp.pl
@@ -0,0 +1,163 @@
+#!/usr/bin/perl -wT
+# check_ciscotemp.pl
+# 
+# Copyright (C) 2000  Leland E. Vandervort <leland@mmania.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# you should have received a copy of the GNU General Public License
+# along with this program (or with Nagios);  if not, write to the
+# Free Software Foundation, Inc., 59 Temple Place - Suite 330, 
+# Boston, MA 02111-1307, USA
+####################################
+# Nagios pluging to check inlet and outlet temperatures on 
+# Cisco router platforms which support environmental monitoring
+# (7200, 7500, GSR12000...)
+####################################
+# default temperature thresholds are 30C for inlet, 40C outlet.
+# if input or output is less than thresholds, returns OK
+# if equal to (the temps don't change that rapidly) returns WARNING
+# if greater than threshold, returns CRITICAL
+# if undetermined, or cannot access environmental, returns UNKNOWN
+# (in accordance with the plugin coding guidelines)
+####################################
+
+use Net::SNMP;
+use Getopt::Long;
+&Getopt::Long::config('auto_abbrev');
+
+my $status;
+my $response = "";
+my $timeout = 10;
+my $community = "public";
+my $port = 161;
+my $INTAKE_TEMP = "1.3.6.1.4.1.9.9.13.1.3.1.3.1";
+my $OUTLET_TEMP = "1.3.6.1.4.1.9.9.13.1.3.1.3.3";
+my $in_temp;
+my $out_temp;
+my $inlet_thresh = 30;
+my $outlet_thresh = 40;
+
+my %STATUSCODE = (  'UNKNOWN' => '-1',
+                    'OK' => '0',
+                    'WARNING' => '1',
+                    'CRITICAL' => '2');
+
+my $state = "UNKNOWN";
+
+
+$SIG{'ALRM'} = sub {
+    print "ERROR: No snmp response from $hostname (sigALRM)\n";
+    exit($STATUSCODE{"UNKNOWN"});
+};
+
+Getopt::Long::Configure('bundling');
+$status = GetOptions
+        ("community=s", \$community,
+         "C=s",         \$community,
+         "H=s",         \$hostname,
+         "hostname=s",  \$hostname,
+         "port=i",      \$port,
+         "timeout=i",   \$timeout,
+         "c=s",         \$critical_vals,
+         "w=s",         \$warning_vals,
+         "ithresh=i",   \$inlet_thresh,
+         "othresh=i",   \$outlet_thresh);
+                     
+if($status == 0) {
+    &show_help;
+}
+
+unless (defined($hostname)) {
+    $hostname = shift || &show_help;
+}
+
+if (defined($critical_vals)) {
+    die "Cannot Parse Critical Thresholds\n"
+        unless (split(/:/,$critical_vals)>=2);
+    ($inlet_thresh,$outlet_thresh) = @_
+}
+die unless(defined($inlet_thresh) && defined($outlet_thresh));
+
+if (defined($warning_vals)) {
+    die "Cannot Parse Critical Thresholds\n"
+        unless (split(/:/,$warning_vals)>=2);
+    ($inlet_warn,$outlet_warn) = @_;
+}else{
+    $inlet_warn=$inlet_thresh;
+    $outlet_warn=$outlet_thresh;
+}
+
+alarm($timeout);                    
+
+$in_temp = &SNMPGET($INTAKE_TEMP);
+$out_temp = &SNMPGET($OUTLET_TEMP);
+
+if (($in_temp < $inlet_thresh) && ($out_temp < $outlet_thresh)) {
+    $state = "OK";
+}
+elsif (($in_temp == $inlet_thresh) || ($out_temp == $outlet_thresh)) {
+    if(($in_temp > $inlet_thresh) || ($out_temp > $outlet_thresh)) {
+        $state = "CRITICAL";
+    }
+    else {
+        $state = "WARNING";
+    }
+}
+elsif (($in_temp > $inlet_thresh) || ($out_temp > $outlet_thresh)) {
+    $state = "CRITICAL";
+}
+else {
+    $state = "WARNING";
+}
+
+print "$state Inlet Temp: $in_temp Outlet Temp: $out_temp\n";
+exit($STATUSCODE{$state});
+
+sub show_help {
+    printf("\nPerl envmon temperature plugin for Nagios\n");
+    printf("Usage:\n");
+    printf("
+  check_ciscotemp [options] <hostname>
+  Options:
+    -C snmp-community
+    -p snmp-port
+    -i input temperature threshold
+    -o output temperature threshold
+
+");
+    printf("Copyright (C)2000 Leland E. Vandervort\n");
+    printf("check_ciscotemp comes with absolutely NO WARRANTY either implied or explicit\n");
+    printf("This program is licensed under the terms of the\n");
+    printf("GNU General Public License\n(check source code for details)\n\n\n");
+    exit($STATUSCODE{"UNKNOWN"});
+}
+
+sub SNMPGET {
+    $OID = shift;
+    ($session,$error) = Net::SNMP->session(
+        Hostname        =>      $hostname,
+        Community       =>      $community,
+        Port            =>      $port
+        );
+    if(!defined($session)) {
+        printf("$state %s\n", $error);
+        exit($STATUSCODE{$state});
+    }
+    if(!defined($response = $session->get_request($OID))) {
+        printf("$state %s\n", $session->error());
+        $session->close();
+        exit($STATUSCODE{$state});
+    }
+    $session->close();
+    return($response->{$OID});
+}
+
diff --git a/contrib/maser-oracle.pl b/contrib/maser-oracle.pl
new file mode 100644
index 00000000..aa2741f1
--- /dev/null
+++ b/contrib/maser-oracle.pl
@@ -0,0 +1,13 @@
+#!/usr/bin/perl
+
+# Oracle plugin submitted by Christopher Maser (maser@onvista.de)
+# 12/31/1999
+
+my $host=$ARGV[0];
+my @test=`tnsping $host`;
+my $arg=$test[6];
+chomp $arg;
+if ($arg =~ /^OK (.*)/)
+{print "$arg"; exit 0}
+else {exit 2;}
+
diff --git a/contrib/mrtgext.pl b/contrib/mrtgext.pl
new file mode 100644
index 00000000..b9e9f6b9
--- /dev/null
+++ b/contrib/mrtgext.pl
@@ -0,0 +1,291 @@
+#!/usr/bin/perl -w
+#
+#  mrtgext.pl  v0.3
+#    (c)2000 Cliff Woolley, Washington and Lee University
+#    jwoolley@wlu.edu
+#
+#  A UNIX counterpart to Jim Drews' MRTG Extension for netware servers
+#  Mimics output of mrtgext.nlm using output of various standard UNIX
+#  programs (df, uptime, and uname)
+#
+#  Dependencies:  I make some assumptions about the output format of
+#  your df and uptime commands.  If you have nonstandard outputs for
+#  any of these, either pick a different command that gives more
+#  standard output or modify the script below.  Example: use /usr/bin/bdf
+#  on HP-UX instead of /usr/bin/df, because bdf follows the output format
+#  I expect while df does not.  This was written on Linux and tested on
+#  HP-UX 10.20 (with changes to the subroutines at the bottom of the
+#  program to reflect HP's command parameters); similar tweaking could
+#  well be required to port this to other platforms.  If you get it
+#  working on your platform, please send me any changes you had to
+#  make so I can try to incorporate them.
+#
+#
+#  Following is what I expect the programs' outputs to look like:
+#  
+#  ======= df ========
+#  Filesystem           1k-blocks      Used Available Use% Mounted on
+#  /dev/sda1              1014696    352708    609612  37% /
+#  /dev/sda2              2262544    586712   1559048  27% /apps
+#  /dev/sda3              4062912    566544   3286604  15% /share
+#  /dev/sr0                651758    651758         0 100% /cdrom
+#  ===================
+#
+#  ===== uptime ======
+#  3:17pm  up 15 days,  4:40,  5 users,  load average: 0.12, 0.26, 0.33
+#  ===================
+#
+
+###############################################################
+#  Configuration section
+###############################################################
+
+$dfcmd          = "/bin/df 2>/dev/null";
+$uptimecmd      = "/usr/bin/uptime";
+%customcmds     = ( "PROCS"    => "numprocesses",
+                    "ZOMBIES"  => "numzombies",
+                    "MEMFREE"  => "memfree",
+                    "SWAPUSED" => "swapused",
+                    "TCPCONNS" => "tcpconns",
+                    "CLIENTS"  => "ipclients" );
+                           # These are functions that you can
+                           # define and customize for your system.
+                           # You probably need to change the provided
+                           # subroutines to work on your system (if
+                           # not Linux).
+
+$rootfsnickname = "root";  # this is necessary as a kludge to
+                           # better match the netware behavior.
+                           # if you already have a _filesystem_
+                           # mounted as /root, then you'll need
+                           # to change this to something else
+$DEBUG          = 0;
+$recvtimeout    = 30;
+
+
+###############################################################
+#  Program section
+###############################################################
+
+require 5.004;
+
+use Sys::Hostname;
+
+
+$DEBUG = $ARGV[0] unless ($DEBUG);
+$SIG{'ALRM'} = sub { exit 1; };
+
+# some things never change
+$hostname = hostname;
+
+
+if ( $DEBUG ) {
+    $| = 1;
+    print scalar localtime,": mrtgext.pl started\n";
+}
+
+# timeout period 
+alarm($recvtimeout);
+my $items = <STDIN>;
+alarm(0);
+
+$items =~ s/[\r\n]//g;
+( $DEBUG ) && print scalar localtime,": request: \"$items\"\n";
+my @items = split (/\s+/,"$items");
+( $DEBUG ) && print scalar localtime,": ",scalar @items," item(s) to process\n";
+
+my $uptime = `$uptimecmd`;
+my @df     = grep {/^\//} `$dfcmd`;
+
+my $processed = 1;
+
+foreach $_ (@items) {
+    ( $DEBUG ) && print scalar localtime,": processing item #$processed: \"$_\"\n";
+    $_ = uc; #convert $_ to upper case
+    if    ( /^UTIL1$/ ) {
+        $uptime =~ /load average: ([^,]+),/;
+        print $1 * 100,"\n";
+    }
+    elsif ( /^UTIL5$/ ) {
+        $uptime =~ /load average: [^,]+, ([^,]+)/;
+        print $1 * 100,"\n";
+    }
+    elsif ( /^UTIL15$/ ) {
+        $uptime =~ /load average: [^,]+, [^,]+, ([^,]+)/;
+        print $1 * 100,"\n";
+    }
+    elsif ( /^CONNECT$/ ) {
+        $uptime =~ /(\d+) users?,/;
+        print "$1\n";
+    }
+    elsif ( /^NAME$/ ) {
+        print "$hostname\n";
+    }
+    elsif ( /^UPTIME$/ ) {
+        $uptime =~ /up (.*),\s+\d+\s+users?,/;
+        print "$1\n";
+    }
+    elsif ( /^VOLUMES$/ ) {
+        foreach $dfline (@df) {
+            my $volname = (split(/\s+/, "$dfline"))[5];
+            $volname =~ s/^\/$/$rootfsnickname/;
+            $volname =~ s/^\///;
+            $volname =~ s/\//_/g;
+            print "$volname\n";
+        }
+    }
+    elsif ( /^VF(\w*)$/ ) {
+        my $volname = ("$1" eq uc("$rootfsnickname")) ? "/" : "$1";
+        foreach $dfline (@df) {
+            my @dfline = split(/\s+/, "$dfline");
+            if ($dfline[5] =~ /^\/?$volname$/i ) {
+                print (($dfline[1]-$dfline[2]) * 1024,"\n");
+                goto done;
+            }
+        }
+        ( $DEBUG ) && print scalar localtime,": ERROR: volume not found.\n";
+        print "-1\n";
+    }
+    elsif ( /^VU(\w*)$/ ) {
+        my $volname = ("$1" eq uc("$rootfsnickname")) ? "/" : "$1";
+        foreach $dfline (@df) {
+            my @dfline = split(/\s+/, "$dfline");
+            if ($dfline[5] =~ /^\/?$volname$/i ) {
+                print ($dfline[2] * 1024,"\n");
+                goto done;
+            }
+        }
+        ( $DEBUG ) && print scalar localtime,": ERROR: volume not found.\n";
+        print "-1\n";
+    }
+    elsif ( /^VS(\w*)$/ ) {
+        my $volname = ("$1" eq uc("$rootfsnickname")) ? "/" : "$1";
+        foreach $dfline (@df) {
+            my @dfline = split(/\s+/, "$dfline");
+            if ($dfline[5] =~ /^\/?$volname$/i ) {
+                print ($dfline[1] * 1024,"\n");
+                goto done;
+            }
+        }
+        ( $DEBUG ) && print scalar localtime,": ERROR: volume not found.\n";
+        print "-1\n";
+    }
+    elsif ( /^VKF(\w*)$/ ) {
+        my $volname = ("$1" eq uc("$rootfsnickname")) ? "/" : "$1";
+        foreach $dfline (@df) {
+            my @dfline = split(/\s+/, "$dfline");
+            if ($dfline[5] =~ /^\/?$volname$/i ) {
+                print (($dfline[1]-$dfline[2]),"\n");
+                goto done;
+            }
+        }
+        ( $DEBUG ) && print scalar localtime,": ERROR: volume not found.\n";
+        print "-1\n";
+    }
+    elsif ( /^VKU(\w*)$/ ) {
+        my $volname = ("$1" eq uc("$rootfsnickname")) ? "/" : "$1";
+        foreach $dfline (@df) {
+            my @dfline = split(/\s+/, "$dfline");
+            if ($dfline[5] =~ /^\/?$volname$/i ) {
+                print ($dfline[2],"\n");
+                goto done;
+            }
+        }
+        ( $DEBUG ) && print scalar localtime,": ERROR: volume not found.\n";
+        print "-1\n";
+    }
+    elsif ( /^VKS(\w*)$/ ) {
+        my $volname = ("$1" eq uc("$rootfsnickname")) ? "/" : "$1";
+        foreach $dfline (@df) {
+            my @dfline = split(/\s+/, "$dfline");
+            if ($dfline[5] =~ /^\/?$volname$/i ) {
+                print ($dfline[1],"\n");
+                goto done;
+            }
+        }
+        ( $DEBUG ) && print scalar localtime,": ERROR: volume not found.\n";
+        print "-1\n";
+    }
+    elsif ( /^ZERO$/ ) {
+        print "0\n";
+    }
+    elsif (exists( $customcmds{"$_"} )) {
+        my $cmdsub = "$customcmds{$_}";
+        print &$cmdsub."\n";
+    }
+    else {
+        print "-1\n";
+    }
+    done: $processed++;
+}
+( $DEBUG ) && print scalar localtime,": done.\n";
+
+
+###############################################################
+#  CUSTOMIZED PROCEDURES
+###############################################################
+
+sub numprocesses {
+
+    my $num = `/bin/ps -eaf | /usr/bin/tail -n +2 | /usr/bin/wc -l`;
+    chomp ($num);
+    $num =~ s/\s+//g;
+
+    $num;
+}
+
+sub numzombies {
+
+    my $num = `/bin/ps -afx | /usr/bin/awk '{print \$3}' | /usr/bin/grep Z | /usr/bin/tail -n +2 | /usr/bin/wc -l`;
+    chomp ($num);
+    $num =~ s/\s+//g;
+
+    $num;
+}
+
+sub tcpconns {
+
+    my $num = `/bin/netstat -nt | /usr/bin/tail -n +3 | /usr/bin/wc -l`;
+    chomp ($num);
+    $num =~ s/\s+//g;
+
+    $num;
+}
+
+sub ipclients {
+
+    my $num = `/bin/netstat -nt | /usr/bin/tail -n +3 | /usr/bin/awk '{print \$5}' | /bin/cut -d : -f 1 | /usr/bin/sort -nu | /usr/bin/wc -l`;
+    chomp ($num);
+    $num =~ s/\s+//g;
+
+    $num;
+}
+
+sub memfree {
+
+    open( FP, "/proc/meminfo" );
+    my @meminfo = <FP>;
+    close(FP);
+
+    #         total:    used:    free:  shared: buffers:  cached:
+    # Mem:  994615296 592801792 401813504 91193344 423313408 93118464
+    # Swap: 204791808        0 204791808
+    my ($total,$free,$buffers,$cache) = (split(/ +/,$meminfo[1]))[1,3,5,6];
+    
+    int(($free+$buffers+$cache)/$total*100);
+}
+
+sub swapused {
+
+    open( FP, "/proc/meminfo" );
+    my @meminfo = <FP>;
+    close(FP);
+
+    #         total:    used:    free:  shared: buffers:  cached:
+    # Mem:  994615296 592424960 402190336 89821184 423313408 93077504
+    # Swap: 204791808        0 204791808
+
+    my ($total,$used) = (split(/ +/,$meminfo[2]))[1,2];
+    
+    int($used/$total*100);
+}
diff --git a/contrib/readme.txt b/contrib/readme.txt
new file mode 100644
index 00000000..d9ae0250
--- /dev/null
+++ b/contrib/readme.txt
@@ -0,0 +1,147 @@
+Contrib Plugins README
+----------------------
+
+This directory contains plugins which have been contributed by various people, but that
+have not yet been incorporated into the core plugins distribution.
+
+If you have questions regarding the use of these plugins, try contacting the author(s)
+or post a message to the nagios-users mailing list (nagios-users@onelist.com)
+requesting assistance.
+
+
+Plugin Overview
+---------------
+
+berger-ping.tar.gz      - Perl script version of the check_ping plugin and a corresponding
+                          CGI (mtr.cgi) that uses mtr to traceroute a path to a host.
+                          (Gary Berger)
+
+bowen-langley_plugins.tar.gz
+                        - Several C plugins including check_inode, check_boot, etc.
+                          (Adam Bown & Thomas Langley)
+
+
+check_bgpstate.tar.gz   - Perl script intended for monitoring BGP sessions on Cisco routers.
+                          Only useful if you are using BGP4 as a routing protocol.  For 
+                          critical alert the AS (autonomous system) number has to be in the
+                          uplinks hash (see the source code).  Requires SNMP read community.
+                          (Christoph Kron)
+
+check_breeze.tar.gz     - Perl script to test signal strength on Breezecom wireless
+                          equipment (Jeffrey Blank)
+
+check_dns_random.tar.gz - Perl script to see if dns resolves hosts randomly from a list 
+                          using the check_dns plugin (Richard Mayhew)
+
+check_flexlm.tar.gz     - Perl script to check a flexlm licensing manager using lmtest
+                          (Ernst-Dieter Martin)
+
+check_hltherm.tar.gz    - C program to check the temperature on a Hot Little Therm temperature
+                          probe.  The HLT device, along with temperature probes, can be obtained
+                          from Spiderplant at http://www.spiderplant.com
+                          (Ethan Galstad)
+
+check_ifoperstatus.tar.gz
+                        - Perl script that checks the operational interface status (up/down) for
+                          one interface on cisco/ascend routers. Especially useful for monitoring 
+                          leased lines.  Requires SNMP read community and SNMP interface key.
+                          (Christoph Kron)         
+
+check_ifstatus.tar.gz   - Perl script that checks operational interface status for every interface
+                          on cisco routers. Requires SNMP read community.
+                          (Christoph Kron)
+
+check_ipxping.tar.gz    - C program that it similiar to the check_ping plugin, except that it
+                          send IPX ping packets to Novell servers or other IPX devices.  This
+                          requires the ipxping binary for Linux systems.  It does NOT by work
+                          without modification with the ipxping binary for SunOS/Solaris.
+                          (Ethan Galstad)
+
+check_maxchannels.tar.gz
+                        - Perl script that can only be used for monitoring Ascend/Lucent Max/TNT
+                          access server. Checks ISDN channels and modem cards. Also shows ISDN and
+                          modem usage.  Requires SNMP read community.
+                          (Christoph Kron)
+
+check_maxwanstate.tar.gz 
+                        - Perl script that can only be used for monitoring Ascend/Lucent Max/TNT
+                          access server. Checks if every enabled E1/T1 interface is operational
+                          (link active). Requires SNMP read community.
+                          (Christoph Kron)
+
+check_memory.tgz        - C program to check available system memory - RAM, swap, buffers,
+                          and cache (Joshua Jackson)
+
+check_nfs.tar.gz        - Perl script to test and NFS server using rpcinfo
+                          (Ernst-Dieter Martin)
+                          <NOW PART OF check_rpc IN CORE>
+
+check_ntp.tar.gz        - Perl script to check an NTP time source (Bo Kernsey)
+                          <MOVED TO CORE>
+
+check_ora.tar.gz        - Shell script that will check an Oracle database and the TNS listener.
+                          Unlike the check_oracle plugin, this plugin detects when a database is
+                          down and does not create temp files (Jason Hedden)
+                          <MOVED TO CORE>
+
+check_pop3.tar.gz       - Perl script that checks to see if POP3 is running and whether or not
+                          authentication can take place (Richard Mayhew)
+
+check_radius.tar.gz     - C program to check RADIUS authentication. This is a hacked version of 
+                          the Cistron Radiusd program radtest that acts as a plugin for Nagios.
+                          The vast majority of the code was written by someone at Livingston
+                          Enterprises and Cistron.  NOTE: Due to the copyright restrictions in 
+                          this code, it cannot be distributed under the GPL license, and thus 
+                          will not appear in the core plugin distribution!
+                          (Adam Jacob)
+
+check_real.tar.gz       - C program to check the status of a REAL media server 
+                          (Pedro Leite)
+                          <MOVED TO CORE>
+
+check_rpc.pl.gz         - Perl script to check rpc services.  Will check to see if the a specified
+                          program is running on the specified server (Chris Kolquist)
+
+check_sap.tar.gz        - Shell script to check an SAP message or application server.  Requires
+                          that you install the saprfc-devel-45A-1.i386.rpm (or higher) package 
+                          on your system.  The package can be obtained from the SAP FTP site in 
+                          the /general/misc/unsupported/linux directory. (Kavel Salavec)
+
+check_uptime.tar.gz     - C program to check system uptime.  Must be compiled with the release
+                          1.2.8 or later of the plugins. (Teresa Ramanan)
+
+check_wave.tar.gz       - Perl script to test signal strength on Speedlan wireless
+                          equipment (Jeffrey Blank)
+
+hopcroft-plugins.tar.gz - Various example plugin scripts contributed by Stanley Hopcroft.
+                          Includes a plugin to check Internet connectivity by checking various
+                          popular search engines, a plugin to check the availability of login
+                          to a TN/3270 mainframe database using Expect to search for "usual"
+                          screens, and another plugin to test the availability of a database
+                          search via the web.
+                          (Stanley Hopcroft)
+
+maser-oracle.tar.gz     - This is a modification to the check_oracle plugin script that returns
+                          the response time in milliseconds.  Requires the Oracle tnsping utility.
+                          (Christoph Maser)
+
+radius.tar.gz           - Code modifications necessary to make the radexample app 
+                          supplied with the radiusclient code work as a RADIUS plugin
+                          for Nagios (Nick Shore)
+
+vincent-check_radius.tar.gz
+                        - C program to check RADIUS authentication.  Requires the radiusclient 
+                          library available from ftp://ftp.cityline.net/pub/radiusclient/
+                          (Robert August Vincent II)
+                          <MOVED TO CORE>
+
+weipert-mysql.tar.gz    - C program to check a connection to a MySQL database server, with an
+                          optional username and password.  Requires mysql.h and libmysqlclient
+                          to compile (Time Weipert)
+
+wright-mysql.tar.gz     - Perl script to check MySQL database servers.  Requires that mysqladmin(1)
+                          be installed on the system (included in the MySQL distribution).  This
+                          plugin can accept warning and critical thresholds for the number of threads
+                          in use by the server (Mitch Wright)
+
+
diff --git a/contrib/restrict.pl b/contrib/restrict.pl
new file mode 100755
index 00000000..75ea5698
--- /dev/null
+++ b/contrib/restrict.pl
@@ -0,0 +1,26 @@
+#!/usr/bin/perl
+
+eval 'exec /usr/bin/perl -S $0 ${1+"$@"}'
+    if 0;
+
+# Set this to your local Nagios plugin path
+my $pluginpath = "/usr/libexec/nagios/plugins/";
+
+# Put all the legal commands (i.e. the commands that are
+# not Nagios checks but are allowed to be executed anyway)
+# in the following associative array.
+my %legal_cmds = ("nc" => "/usr/sbin/nc");
+
+# This will not work on OpenSSH
+# It does work on ssh-1.2.27-1i
+@arg = split ' ',$ENV{'SSH_ORIGINAL_COMMAND'};
+
+$arg[0] =~ s/.*\///;            # strip leading path
+$arg[0] =~ tr/-_.a-zA-Z0-9/X/c; # change atypical chars to X
+
+if (!defined ($cmd = $legal_cmds{$arg[0]}))
+{
+  $cmd = $pluginpath . $arg[0];
+}
+
+exec { $cmd } @arg or die "Can't exec $cmd: $!";
diff --git a/contrib/tarballs/berger-ping.tar.gz b/contrib/tarballs/berger-ping.tar.gz
new file mode 100644
index 00000000..cc58750d
--- /dev/null
+++ b/contrib/tarballs/berger-ping.tar.gz
diff --git a/contrib/tarballs/bowen-langley_plugins.tar.gz b/contrib/tarballs/bowen-langley_plugins.tar.gz
new file mode 100644
index 00000000..6195109f
--- /dev/null
+++ b/contrib/tarballs/bowen-langley_plugins.tar.gz
diff --git a/contrib/tarballs/check_bgp-1.0.tar.gz b/contrib/tarballs/check_bgp-1.0.tar.gz
new file mode 100644
index 00000000..9d45c195
--- /dev/null
+++ b/contrib/tarballs/check_bgp-1.0.tar.gz
diff --git a/contrib/tarballs/check_breeze.tar.gz b/contrib/tarballs/check_breeze.tar.gz
new file mode 100644
index 00000000..fb5186ef
--- /dev/null
+++ b/contrib/tarballs/check_breeze.tar.gz
diff --git a/contrib/tarballs/check_flexlm.tar.gz b/contrib/tarballs/check_flexlm.tar.gz
new file mode 100644
index 00000000..4ab71441
--- /dev/null
+++ b/contrib/tarballs/check_flexlm.tar.gz
diff --git a/contrib/tarballs/check_hltherm.tar.gz b/contrib/tarballs/check_hltherm.tar.gz
new file mode 100644
index 00000000..7c45cc87
--- /dev/null
+++ b/contrib/tarballs/check_hltherm.tar.gz
diff --git a/contrib/tarballs/check_hprsc.tar.gz b/contrib/tarballs/check_hprsc.tar.gz
new file mode 100644
index 00000000..8998ff83
--- /dev/null
+++ b/contrib/tarballs/check_hprsc.tar.gz
diff --git a/contrib/tarballs/check_radius.tar.gz b/contrib/tarballs/check_radius.tar.gz
new file mode 100644
index 00000000..70bb08a2
--- /dev/null
+++ b/contrib/tarballs/check_radius.tar.gz
diff --git a/contrib/tarballs/check_wave.tar.gz b/contrib/tarballs/check_wave.tar.gz
new file mode 100644
index 00000000..755be5a9
--- /dev/null
+++ b/contrib/tarballs/check_wave.tar.gz
diff --git a/contrib/tarballs/hopcroft-plugins.tar.gz b/contrib/tarballs/hopcroft-plugins.tar.gz
new file mode 100644
index 00000000..0406a743
--- /dev/null
+++ b/contrib/tarballs/hopcroft-plugins.tar.gz
diff --git a/contrib/tarballs/radius.tar.gz b/contrib/tarballs/radius.tar.gz
new file mode 100644
index 00000000..022dc3be
--- /dev/null
+++ b/contrib/tarballs/radius.tar.gz
diff --git a/contrib/urlize.pl b/contrib/urlize.pl
new file mode 100644
index 00000000..8bb591f2
--- /dev/null
+++ b/contrib/urlize.pl
@@ -0,0 +1,16 @@
+#!/usr/bin/perl
+#
+# urlize.pl
+#   jcw, 5/12/00
+#
+# A wrapper around Nagios plugins that provides a URL link in the output
+#
+
+($#ARGV < 1) && die "Incorrect arguments";
+my $url = shift;
+
+chomp ($result = `@ARGV`);
+print "<A HREF=\"$url\">$result</A>\n";
+
+# exit with same exit value as the child produced
+exit ($? >> 8);
diff --git a/contrib/utils.py b/contrib/utils.py
new file mode 100644
index 00000000..73d795c9
--- /dev/null
+++ b/contrib/utils.py
@@ -0,0 +1,310 @@
+#
+#
+# Util classes for Nagios plugins
+#
+#
+
+
+
+#==========================================================================
+#
+# Version: = '$Id$'
+#
+# (C) Rob W.W. Hooft, Nonius BV, 1998
+#
+# Contact r.hooft@euromail.net for questions/suggestions.
+# See: <http://starship.python.net/crew/hooft/>
+# Distribute freely.
+#
+# jaclu@galdrion.com 2000-07-14
+#   Some changes in error handling of Run() to avoid error garbage
+#   when used from Nagios plugins
+#   I also removed the following functions: AbortableWait() and _buttonkill() 
+#   since they are only usable with Tkinter
+
+import sys,os,signal,time,string
+
+class error(Exception):
+    pass
+
+class _ready(Exception):
+    pass
+
+def which(filename):
+    """Find the file 'filename' in the execution path. If no executable
+       file is found, return None"""
+    for dir in string.split(os.environ['PATH'],os.pathsep):
+        fn=os.path.join(dir,filename)
+        if os.path.exists(fn):
+            if os.stat(fn)[0]&0111:
+                return fn
+    else:
+        return None
+    
+class Task:
+    """Manage asynchronous subprocess tasks.
+       This differs from the 'subproc' package!
+        - 'subproc' connects to the subprocess via pipes
+        - 'task' lets the subprocess run autonomously.
+       After starting the task, we can just:
+        - ask whether it is finished yet
+        - wait until it is finished
+        - perform an 'idle' task (e.g. Tkinter's mainloop) while waiting for
+          subprocess termination
+        - kill the subprocess with a specific signal
+        - ask for the exit code.
+       Summarizing:
+        - 'subproc' is a sophisticated os.popen()
+        - 'task' is a sophisticated os.system()
+       Another difference of task with 'subproc':
+        - If the Task() object is deleted, before the subprocess status
+          was retrieved, the child process will stay.
+          It will never be waited for (i.e., the process will turn into
+          a zombie. Not a good idea in general).
+
+       Public data:
+           None.
+
+       Public methods:
+           __init__, __str__, Run, Wait, Kill, Done, Status.
+    """
+    def __init__(self,command):
+        """Constructor.
+           arguments:
+               command: the command to run, in the form of a string,
+                        or a tuple or list of words.
+           """
+        if type(command)==type(''):
+            self.cmd=command
+            self.words=string.split(command)
+        elif type(command)==type([]) or type(command)==type(()):
+            # Surround each word by ' '. Limitation: words cannot contain ' chars
+            self.cmd="'"+string.join(command,"' '")+"'"
+            self.words=tuple(command)
+        else:
+            raise error("command must be tuple, list, or string")
+        self.pid=None
+        self.status=None
+
+    def Run(self,usesh=0,detach=0,stdout=None,stdin=None,stderr=None):
+        """Actually run the process.
+           This method should be called exactly once.
+           optional arguments:
+               usesh=0: if 1, run 'sh -c command', if 0, split the
+                        command into words, and run it by ourselves.
+                        If usesh=1, the 'Kill' method might not do what
+                        you want (it will kill the 'sh' process, not the
+                        command).
+               detach=0: if 1, run 'sh -c 'command&' (regardless of
+                         'usesh'). Since the 'sh' process will immediately
+                         terminate, the task created will be inherited by
+                         'init', so you can safely forget it.  Remember that if
+                         detach=1, Kill(), Done() and Status() will manipulate
+                         the 'sh' process; there is no way to find out about the
+                         detached process.
+               stdout=None: filename to use as stdout for the child process.
+                            If None, the stdout of the parent will be used.
+               stdin= None: filename to use as stdin for the child process.
+                            If None, the stdin of the parent will be used.
+               stderr=None: filename to use as stderr for the child process.
+                            If None, the stderr of the parent will be used.
+           return value:                            
+               None
+        """
+        if self.pid!=None:
+            raise error("Second run on task forbidden")
+        self.pid=os.fork()
+        if not self.pid:
+            for fn in range(3,256): # Close all non-standard files in a safe way
+                try:
+                    os.close(fn)
+                except os.error:
+                    pass
+            #
+            # jaclu@galdrion.com 2000-07-14
+            #
+            # I changed this bit somewhat, since Nagios plugins
+            # should send only limited errors to the caller
+            # The original setup here corupted output when there was an error.
+            # Instead the caller should check result of Wait() and anything
+            # not zero should be reported as a failure.
+            #
+            try:
+                if stdout: # Replace stdout by file
+                    os.close(1)
+                    i=os.open(stdout,os.O_CREAT|os.O_WRONLY|os.O_TRUNC,0666)
+                    if i!=1:
+                        sys.stderr.write("stdout not opened on 1!\n")
+                if stdin: # Replace stdin by file
+                    os.close(0)
+                    i=os.open(stdin,os.O_RDONLY)
+                    if i!=0:
+                        sys.stderr.write("stdin not opened on 0!\n")
+                if stderr: # Replace stderr by file
+                    os.close(2)
+                    i=os.open(stderr,os.O_CREAT|os.O_WRONLY|os.O_TRUNC,0666)
+                    if i!=2:
+                        sys.stdout.write("stderr not opened on 2!\n")
+                #try:
+                if detach:
+                    os.execv('/bin/sh',('sh','-c',self.cmd+'&'))
+                elif usesh:
+                    os.execv('/bin/sh',('sh','-c',self.cmd))
+                else:
+                    os.execvp(self.words[0],self.words)
+            except:
+                #print self.words
+                #sys.stderr.write("Subprocess '%s' execution failed!\n"%self.cmd)
+                sys.exit(1)
+        else:
+            # Mother process
+            if detach:
+                # Should complete "immediately"
+                self.Wait()
+
+    def Wait(self,idlefunc=None,interval=0.1):
+        """Wait for the subprocess to terminate.
+           If the process has already terminated, this function will return
+           immediately without raising an error.
+           optional arguments:
+               idlefunc=None: a callable object (function, class, bound method)
+                              that will be called every 0.1 second (or see
+                              the 'interval' variable) while waiting for
+                              the subprocess to terminate. This can be the
+                              Tkinter 'update' procedure, such that the GUI
+                              doesn't die during the run. If this is set to
+                              'None', the process will really wait. idlefunc
+                              should ideally not take a very long time to
+                              complete...
+               interval=0.1: The interval (in seconds) with which the 'idlefunc'
+                             (if any) will be called.
+           return value:
+               the exit status of the subprocess (0 if successful).
+        """
+        if self.status!=None:
+            # Already finished
+            return self.status
+        if callable(idlefunc):
+            while 1:
+                try:
+                    pid,status=os.waitpid(self.pid,os.WNOHANG)
+                    if pid==self.pid:
+                        self.status=status
+                        return status
+                    else:
+                        idlefunc()
+                        time.sleep(interval)
+                except KeyboardInterrupt:
+                    # Send the interrupt to the inferior process.
+                    self.Kill(signal=signal.SIGINT)
+        elif idlefunc:
+            raise error("Non-callable idle function")
+        else:
+            while 1:
+                try:
+                    pid,status=os.waitpid(self.pid,0)
+                    self.status=status
+                    return status
+                except KeyboardInterrupt:
+                    # Send the interrupt to the inferior process.
+                    self.Kill(signal=signal.SIGINT)
+
+    def Kill(self,signal=signal.SIGTERM):
+        """Send a signal to the running subprocess.
+           optional arguments:
+               signal=SIGTERM: number of the signal to send.
+                               (see os.kill)
+           return value:
+               see os.kill()
+        """
+        if self.status==None:
+            # Only if it is not already finished
+            return os.kill(self.pid,signal)
+
+    def Done(self):
+        """Ask whether the process has already finished.
+           return value:
+               1: yes, the process has finished.
+               0: no, the process has not finished yet.
+        """
+        if self.status!=None:
+            return 1
+        else:
+            pid,status=os.waitpid(self.pid,os.WNOHANG)
+            if pid==self.pid:
+                #print "OK:",pid,status
+                self.status=status
+                return 1
+            else:
+                #print "NOK:",pid,status
+                return 0
+
+    def Status(self):
+        """Ask for the status of the task.
+           return value:
+               None: process has not finished yet (maybe not even started).
+               any integer: process exit status.
+        """
+        self.Done()
+        return self.status
+
+    def __str__(self):
+        if self.pid!=None:
+            if self.status!=None:
+                s2="done, exit status=%d"%self.status
+            else:
+                s2="running"
+        else:
+            s2="prepared"
+        return "<%s: '%s', %s>"%(self.__class__.__name__,self.cmd,s2)
+
+
+#==========================================================================
+#
+#
+# Class: TimeoutHandler
+# License: GPL
+# Copyright (c)  2000 Jacob Lundqvist (jaclu@galdrion.com)
+#
+# Version: 1.0  2000-07-14
+#
+# Description:
+#  On init, suply a call-back kill_func that should be called on timeout
+#
+#  Make sure that what ever you are doing is calling Check periodically
+# 
+#  To check if timeout was triggered call WasTimeOut returns (true/false)
+#
+
+import time,sys
+
+class TimeoutHandler:
+    def __init__(self,kill_func,time_to_live=10,debug=0):
+        'Generic time-out handler.'
+        self.kill_func=kill_func
+        self.start_time=time.time()
+        self.stop_time=+self.start_time+int(time_to_live)
+        self.debug=debug
+        self.aborted=0
+    
+    def Check(self):
+        'Call this periodically to check for time-out.'
+        if self.debug:
+            sys.stdout.write('.')
+            sys.stdout.flush()
+        if time.time()>=self.stop_time:
+            self.TimeOut()
+            
+    def TimeOut(self):
+        'Trigger the time-out callback.'
+        self.aborted=1
+        if self.debug:
+            print 'Timeout, aborting'
+        self.kill_func()
+        
+    def WasTimeOut(self):
+        'Indicates if timeout was triggered 1=yes, 0=no.'
+        if self.debug:
+            print ''
+            print 'call duration: %.2f seconds' % (time.time()-self.start_time)
+        return self.aborted