1 files changed, 229 insertions, 0 deletions

diff --git a/contrib/check_ica_master_browser.pl b/contrib/check_ica_master_browser.pl
new file mode 100755
index 00000000..1bbab60b
--- /dev/null
+++ b/contrib/check_ica_master_browser.pl
@@ -0,0 +1,229 @@
+#!/usr/bin/perl -w
+
+# $Id$
+
+# $Log$
+# Revision 1.1  2005/01/25 09:09:33  stanleyhopcroft
+# New plugin - checks that ICA master browser is what it should be (important for firewalled dialup)
+#
+
+use strict ;
+
+use IO::Socket;
+use IO::Select;
+use Getopt::Long ;
+
+use lib qw(/usr/local/nagios/libexec) ;
+use utils qw(%ERRORS &print_revision &support &usage);
+use packet_utils qw(&pdump &tethereal) ;
+
+my $PROGNAME = 'check_ica_master_browser' ;
+
+# You might have to change this...
+
+my $PACKET_TIMEOUT      = 1;
+                                                                                                # Number of seconds to wait for further UDP packets
+my $TEST_COUNT          = 2;
+                                                                                                # Number of datagrams sent without reply 
+my $BUFFER_SIZE         = 1500;
+                                                                                                # buffer size used for 'recv' calls.
+my $ICA_PORT            = 1604;
+                                                                                                # what port ICA runs on. Unlikely to change.
+
+# End user config.
+
+my ($debug, $preferred_master, $bcast_addr, $ica_browser, $timeout) ;
+
+Getopt::Long::Configure('bundling', 'no_ignore_case');
+GetOptions
+        ("V|version"     => \&version,
+         "h|help"        => \&help,
+         "v|verbose"     => \$debug,
+         "B|broadcast_addr:s"   => \$bcast_addr,
+         "I|ica_browser:s"      => \$ica_browser,
+         "P|preferred_master:s" => \$preferred_master,
+         "T|Packet_timeout:i"   => \$timeout,
+) ;
+
+
+my $broadcast_addr = $1 if $bcast_addr and $bcast_addr =~ m#(\d+\.\d+\.\d+\.\d+)# ;
+usage("Invalid broadcast address: $bcast_addr")
+        if $bcast_addr and not defined($broadcast_addr)  ;
+
+usage("You must provide either the name of an ICA browser or the broadcast address of the subnet containing them\n")
+        unless ($ica_browser or $broadcast_addr) ;
+
+usage("You must provide the name or address of a preferred ICA master browser\n")
+        unless ($preferred_master) ;
+
+my $preferred_master_n = $preferred_master =~ m#(\d+\.\d+\.\d+\.\d+)#
+        ? $preferred_master
+        : inet_ntoa(scalar gethostbyname($preferred_master)) ;
+
+my $Timeout = $timeout || $PACKET_TIMEOUT ;
+
+                                                                                                # Definitions of query strings. Change at your own risk :)
+                                                                                                # this info was gathered with tcpdump whilst trying to use an ICA client,
+                                                                                                # so I'm not 100% sure of what each value is.
+
+my $bcast_helo = &tethereal(<<'End_of_Tethereal_trace', '1e') ;
+0020  ff ff 04 d6 06 44 00 26 4a 76 1e 00 01 30 02 fd   .....D.&Jv...0..
+0030  a8 e3 00 02 f5 95 9f f5 30 07 00 00 00 00 00 00   ........0.......
+0040  00 00 00 00 00 00 01 00                           ........
+End_of_Tethereal_trace
+
+my $direct_helo = &tethereal(<<'End_of_Tethereal_trace', '20') ;
+0020  64 17 05 0f 06 44 00 28 ab b5 20 00 01 30 02 fd   d....D.(.. ..0..
+0030  a8 e3 00 00 00 00 00 00 00 00 00 00 00 00 00 00   ................
+0040  00 00 00 00 00 00 00 00 00 00                     ........
+End_of_Tethereal_trace
+
+my $Udp =  IO::Socket::INET->new( Proto => 'udp' )
+        || die "Socket failure: $!";
+
+                                                                                                # select is here to allow us to set timeouts on the connections.  Otherwise they 
+                                                                                                # just 'stop' until a server appears.
+
+my $select =  IO::Select->new($Udp)
+        || die "Select failure: $!";
+
+$Udp->sockopt(SO_BROADCAST, 1 );
+
+my ($remote_host, $buff, $destination, $raddr, $rport, $rhost, @remote_response);
+my ($query_message, $send_addr, $this_test) ;
+
+$buff = '';
+$this_test = 0;
+
+                                                                                                # If there is no response to the first helo packet it will be resent
+                                                                                                # up to $TEST_COUNT (see at the top).
+
+$query_message = $broadcast_addr ? $bcast_helo : $direct_helo ;
+$destination   = $broadcast_addr ? $broadcast_addr: $ica_browser ;
+$send_addr = sockaddr_in($ICA_PORT, inet_aton($destination) ) ;
+
+while ( ++$this_test <= $TEST_COUNT && !$buff ) {
+
+        print "Sending helo datagram. datagram number: ", $this_test, "\n"
+                if $debug ;
+
+        print "Querying $destination for master browser\n"
+                if  $debug  ;
+        &pdump($query_message)
+                if $debug ;
+        $Udp->send($query_message, 0, $send_addr ); 
+        if ( $select->can_read($Timeout) ) {
+                $remote_host = $Udp->recv($buff, $BUFFER_SIZE, 0 );
+        }
+
+        last
+                if $buff ;
+        sleep 1 ;
+
+} 
+
+                                                                                                # Ok we've looped several times, looking for a response. If we don't have one 
+                                                                                                # yet, we simply mark the whole lot as being unavailable.
+
+unless ( $buff ) {
+        print "Failed. No response to helo datagram (master browser query) from $destination.\n" ;
+        exit $ERRORS{CRITICAL} ;
+}
+
+($rport, $raddr) = sockaddr_in( $remote_host );
+$rhost = gethostbyaddr( $raddr, AF_INET );
+my @tmpbuf = unpack('C*', $buff );
+if ( $debug ) {
+        print "$rhost:$rport responded with: ",length($buff), " bytes\n";
+        &pdump($buff) ;
+}
+
+                                                                                                # Now we have a response, then we need to figure out the master browser, and 
+                                                                                                # query it for published applications...
+
+my $master_browser = join '.', @tmpbuf[32..35] ;
+my ($master_browser_a) = gethostbyaddr(inet_aton($master_browser), AF_INET) =~ /^(\w+?)\./ ;
+     
+                                                                                                # Ok should probably error check this, because it's remotely possible
+                                                                                                # that a server response might be completely wrong...
+      
+print "Master browser = $master_browser_a/$master_browser\n"
+        if  $debug ;
+
+$send_addr = sockaddr_in($ICA_PORT, inet_aton($master_browser));
+
+my $subject_clause = $bcast_addr ? "of the \"$destination\" subnet" : "known to ICA server \"$destination\"" ;
+
+if ( $master_browser eq  $preferred_master_n ) {
+        print "Preferred master browser \"$preferred_master\" __is__ the master browser (\"$master_browser_a/$master_browser\") $subject_clause.\n" ;
+        exit $ERRORS{OK} ;
+} else {
+        print "\"\u$preferred_master\" is __not__ the master browser (\"$master_browser_a/$master_browser\") $subject_clause: remote clients (dialup) may not find Published applications from Master Browser.\n" ;
+        exit $ERRORS{CRITICAL} ;
+}
+
+close $Udp;
+
+
+sub print_usage () {
+        print "Usage: $PROGNAME (-B <broadcast_address>| -I <citrix_server>) - P <preferred_master_browser>" ;
+}
+
+sub print_help () {
+        print_revision($PROGNAME,'$Revision$ ');
+        print "Copyright (c) 2002 Ed Rolison/Tom De Blende/S Hopcroft
+
+Perl Check Citrix Master Browser plugin for Nagios.
+
+Returns OK if the Citrix master browser is that given by the -P option.
+
+The plugin works by
+  If the -B option is specified, sends a broadcast helo to find the address of the Citrix master browser in the specified subnet.
+    return critical if there is no reply;
+  Else if the -I option is specified 
+    send a direct helo to the specified server until there is a response (containing the address of the Citrix master browser)
+
+
+  return Critical if the response does not contain the address of the 'preferred master browser' (-P option).
+  return OK
+
+  How ICA Clients Use the Master ICA Browser.
+
+Citrix ICA Clients must locate the master browser to get the address of a server or published application.
+
+The Citrix ICA Client can locate the master browser by sending out broadcast packets, or,
+if the address of a Citrix server is specified in the Citrix ICA Client or in an ICA file,
+the ICA Client locates the master browser by sending directed packets to the specified address.
+The ICA Client requests the address of the ICA master browser from the Citrix server.
+
+";
+        print_usage();
+        print '
+-B, --broadcast_address:STRING
+   The broadcast address that should contain Citrix master browser. This option takes precedence over -I.
+-I, --ica_browser:STRING
+   Optional name or address of an ICA server that could be the master browser (used when broadcast not possible).
+-P, --preferred_master:STRING
+   Name or address of the ICA server that _should_ be the master browser.
+   Required.
+-T, --packet-timeout:INTEGER
+   Time to wait for UDP packets (default 1 sec).
+-v, --verbose
+   Debugging output.
+-h, --help
+   This stuff.
+
+';
+        support();
+}
+
+sub version () {
+        print_revision($PROGNAME,'$Revision$ ');
+        exit $ERRORS{'OK'};
+}
+
+sub help () {
+        print_help();
+        exit $ERRORS{'OK'};
+}
+