1 files changed, 671 insertions, 0 deletions

diff --git a/gl/regex.h b/gl/regex.h
new file mode 100644
index 0000000..6885ebd
--- /dev/null
+++ b/gl/regex.h
@@ -0,0 +1,671 @@
+/* Definitions for data structures and routines for the regular
+   expression library.
+   Copyright (C) 1985,1989-93,1995-98,2000,2001,2002,2003,2005,2006
+   Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License along
+   with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef _REGEX_H
+#define _REGEX_H 1
+
+#include <sys/types.h>
+
+/* Allow the use in C++ code.  */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Define __USE_GNU_REGEX to declare GNU extensions that violate the
+   POSIX name space rules.  */
+#undef __USE_GNU_REGEX
+#if (defined _GNU_SOURCE                                        \
+     || (!defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE     \
+         && !defined _XOPEN_SOURCE))
+# define __USE_GNU_REGEX 1
+#endif
+
+#ifdef _REGEX_LARGE_OFFSETS
+
+/* Use types and values that are wide enough to represent signed and
+   unsigned byte offsets in memory.  This currently works only when
+   the regex code is used outside of the GNU C library; it is not yet
+   supported within glibc itself, and glibc users should not define
+   _REGEX_LARGE_OFFSETS.  */
+
+/* The type of the offset of a byte within a string.
+   For historical reasons POSIX 1003.1-2004 requires that regoff_t be
+   at least as wide as off_t.  However, many common POSIX platforms set
+   regoff_t to the more-sensible ssize_t and the Open Group has
+   signalled its intention to change the requirement to be that
+   regoff_t be at least as wide as ptrdiff_t and ssize_t; see XBD ERN
+   60 (2005-08-25).  We don't know of any hosts where ssize_t or
+   ptrdiff_t is wider than ssize_t, so ssize_t is safe.  */
+typedef ssize_t regoff_t;
+
+/* The type of nonnegative object indexes.  Traditionally, GNU regex
+   uses 'int' for these.  Code that uses __re_idx_t should work
+   regardless of whether the type is signed.  */
+typedef size_t __re_idx_t;
+
+/* The type of object sizes.  */
+typedef size_t __re_size_t;
+
+/* The type of object sizes, in places where the traditional code
+   uses unsigned long int.  */
+typedef size_t __re_long_size_t;
+
+#else
+
+/* Use types that are binary-compatible with the traditional GNU regex
+   implementation, which mishandles strings longer than INT_MAX.  */
+
+typedef int regoff_t;
+typedef int __re_idx_t;
+typedef unsigned int __re_size_t;
+typedef unsigned long int __re_long_size_t;
+
+#endif
+
+/* The following two types have to be signed and unsigned integer type
+   wide enough to hold a value of a pointer.  For most ANSI compilers
+   ptrdiff_t and size_t should be likely OK.  Still size of these two
+   types is 2 for Microsoft C.  Ugh... */
+typedef long int s_reg_t;
+typedef unsigned long int active_reg_t;
+
+/* The following bits are used to determine the regexp syntax we
+   recognize.  The set/not-set meanings are chosen so that Emacs syntax
+   remains the value 0.  The bits are given in alphabetical order, and
+   the definitions shifted by one from the previous bit; thus, when we
+   add or remove a bit, only one other definition need change.  */
+typedef unsigned long int reg_syntax_t;
+
+#ifdef __USE_GNU_REGEX
+
+/* If this bit is not set, then \ inside a bracket expression is literal.
+   If set, then such a \ quotes the following character.  */
+# define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
+
+/* If this bit is not set, then + and ? are operators, and \+ and \? are
+     literals.
+   If set, then \+ and \? are operators and + and ? are literals.  */
+# define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
+
+/* If this bit is set, then character classes are supported.  They are:
+     [:alpha:], [:upper:], [:lower:],  [:digit:], [:alnum:], [:xdigit:],
+     [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
+   If not set, then character classes are not supported.  */
+# define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
+
+/* If this bit is set, then ^ and $ are always anchors (outside bracket
+     expressions, of course).
+   If this bit is not set, then it depends:
+        ^  is an anchor if it is at the beginning of a regular
+           expression or after an open-group or an alternation operator;
+        $  is an anchor if it is at the end of a regular expression, or
+           before a close-group or an alternation operator.
+
+   This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
+   POSIX draft 11.2 says that * etc. in leading positions is undefined.
+   We already implemented a previous draft which made those constructs
+   invalid, though, so we haven't changed the code back.  */
+# define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
+
+/* If this bit is set, then special characters are always special
+     regardless of where they are in the pattern.
+   If this bit is not set, then special characters are special only in
+     some contexts; otherwise they are ordinary.  Specifically,
+     * + ? and intervals are only special when not after the beginning,
+     open-group, or alternation operator.  */
+# define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
+
+/* If this bit is set, then *, +, ?, and { cannot be first in an re or
+     immediately after an alternation or begin-group operator.  */
+# define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
+
+/* If this bit is set, then . matches newline.
+   If not set, then it doesn't.  */
+# define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
+
+/* If this bit is set, then . doesn't match NUL.
+   If not set, then it does.  */
+# define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
+
+/* If this bit is set, nonmatching lists [^...] do not match newline.
+   If not set, they do.  */
+# define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
+
+/* If this bit is set, either \{...\} or {...} defines an
+     interval, depending on RE_NO_BK_BRACES.
+   If not set, \{, \}, {, and } are literals.  */
+# define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
+
+/* If this bit is set, +, ? and | aren't recognized as operators.
+   If not set, they are.  */
+# define RE_LIMITED_OPS (RE_INTERVALS << 1)
+
+/* If this bit is set, newline is an alternation operator.
+   If not set, newline is literal.  */
+# define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
+
+/* If this bit is set, then `{...}' defines an interval, and \{ and \}
+     are literals.
+  If not set, then `\{...\}' defines an interval.  */
+# define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
+
+/* If this bit is set, (...) defines a group, and \( and \) are literals.
+   If not set, \(...\) defines a group, and ( and ) are literals.  */
+# define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
+
+/* If this bit is set, then \<digit> matches <digit>.
+   If not set, then \<digit> is a back-reference.  */
+# define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
+
+/* If this bit is set, then | is an alternation operator, and \| is literal.
+   If not set, then \| is an alternation operator, and | is literal.  */
+# define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
+
+/* If this bit is set, then an ending range point collating higher
+     than the starting range point, as in [z-a], is invalid.
+   If not set, then when ending range point collates higher than the
+     starting range point, the range is ignored.  */
+# define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
+
+/* If this bit is set, then an unmatched ) is ordinary.
+   If not set, then an unmatched ) is invalid.  */
+# define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
+
+/* If this bit is set, succeed as soon as we match the whole pattern,
+   without further backtracking.  */
+# define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
+
+/* If this bit is set, do not process the GNU regex operators.
+   If not set, then the GNU regex operators are recognized. */
+# define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
+
+/* If this bit is set, turn on internal regex debugging.
+   If not set, and debugging was on, turn it off.
+   This only works if regex.c is compiled -DDEBUG.
+   We define this bit always, so that all that's needed to turn on
+   debugging is to recompile regex.c; the calling code can always have
+   this bit set, and it won't affect anything in the normal case. */
+# define RE_DEBUG (RE_NO_GNU_OPS << 1)
+
+/* If this bit is set, a syntactically invalid interval is treated as
+   a string of ordinary characters.  For example, the ERE 'a{1' is
+   treated as 'a\{1'.  */
+# define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1)
+
+/* If this bit is set, then ignore case when matching.
+   If not set, then case is significant.  */
+# define RE_ICASE (RE_INVALID_INTERVAL_ORD << 1)
+
+/* This bit is used internally like RE_CONTEXT_INDEP_ANCHORS but only
+   for ^, because it is difficult to scan the regex backwards to find
+   whether ^ should be special.  */
+# define RE_CARET_ANCHORS_HERE (RE_ICASE << 1)
+
+/* If this bit is set, then \{ cannot be first in an bre or
+   immediately after an alternation or begin-group operator.  */
+# define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1)
+
+/* If this bit is set, then no_sub will be set to 1 during
+   re_compile_pattern.  */
+# define RE_NO_SUB (RE_CONTEXT_INVALID_DUP << 1)
+
+#endif /* defined __USE_GNU_REGEX */
+
+/* This global variable defines the particular regexp syntax to use (for
+   some interfaces).  When a regexp is compiled, the syntax used is
+   stored in the pattern buffer, so changing this does not affect
+   already-compiled regexps.  */
+extern reg_syntax_t re_syntax_options;
+
+#ifdef __USE_GNU_REGEX
+/* Define combinations of the above bits for the standard possibilities.
+   (The [[[ comments delimit what gets put into the Texinfo file, so
+   don't delete them!)  */
+/* [[[begin syntaxes]]] */
+# define RE_SYNTAX_EMACS 0
+
+# define RE_SYNTAX_AWK                                                  \
+  (RE_BACKSLASH_ESCAPE_IN_LISTS   | RE_DOT_NOT_NULL                     \
+   | RE_NO_BK_PARENS              | RE_NO_BK_REFS                       \
+   | RE_NO_BK_VBAR                | RE_NO_EMPTY_RANGES                  \
+   | RE_DOT_NEWLINE               | RE_CONTEXT_INDEP_ANCHORS            \
+   | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
+
+# define RE_SYNTAX_GNU_AWK                                              \
+  ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \
+   & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS            \
+       | RE_CONTEXT_INVALID_OPS ))
+
+# define RE_SYNTAX_POSIX_AWK                                            \
+  (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS              \
+   | RE_INTERVALS           | RE_NO_GNU_OPS)
+
+# define RE_SYNTAX_GREP                                                 \
+  (RE_BK_PLUS_QM              | RE_CHAR_CLASSES                         \
+   | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS                            \
+   | RE_NEWLINE_ALT)
+
+# define RE_SYNTAX_EGREP                                                \
+  (RE_CHAR_CLASSES        | RE_CONTEXT_INDEP_ANCHORS                    \
+   | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE                    \
+   | RE_NEWLINE_ALT       | RE_NO_BK_PARENS                             \
+   | RE_NO_BK_VBAR)
+
+# define RE_SYNTAX_POSIX_EGREP                                          \
+  (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES                     \
+   | RE_INVALID_INTERVAL_ORD)
+
+/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff.  */
+# define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
+
+# define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
+
+/* Syntax bits common to both basic and extended POSIX regex syntax.  */
+# define _RE_SYNTAX_POSIX_COMMON                                        \
+  (RE_CHAR_CLASSES | RE_DOT_NEWLINE      | RE_DOT_NOT_NULL              \
+   | RE_INTERVALS  | RE_NO_EMPTY_RANGES)
+
+# define RE_SYNTAX_POSIX_BASIC                                          \
+  (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM | RE_CONTEXT_INVALID_DUP)
+
+/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
+   RE_LIMITED_OPS, i.e., \? \+ \| are not recognized.  Actually, this
+   isn't minimal, since other operators, such as \`, aren't disabled.  */
+# define RE_SYNTAX_POSIX_MINIMAL_BASIC                                  \
+  (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
+
+# define RE_SYNTAX_POSIX_EXTENDED                                       \
+  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS                  \
+   | RE_CONTEXT_INDEP_OPS   | RE_NO_BK_BRACES                           \
+   | RE_NO_BK_PARENS        | RE_NO_BK_VBAR                             \
+   | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD)
+
+/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is
+   removed and RE_NO_BK_REFS is added.  */
+# define RE_SYNTAX_POSIX_MINIMAL_EXTENDED                               \
+  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS                  \
+   | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES                           \
+   | RE_NO_BK_PARENS        | RE_NO_BK_REFS                             \
+   | RE_NO_BK_VBAR          | RE_UNMATCHED_RIGHT_PAREN_ORD)
+/* [[[end syntaxes]]] */
+
+#endif /* defined __USE_GNU_REGEX */
+
+#ifdef __USE_GNU_REGEX
+
+/* Maximum number of duplicates an interval can allow.  POSIX-conforming
+   systems might define this in <limits.h>, but we want our
+   value, so remove any previous define.  */
+# ifdef RE_DUP_MAX
+#  undef RE_DUP_MAX
+# endif
+
+/* RE_DUP_MAX is 2**15 - 1 because an earlier implementation stored
+   the counter as a 2-byte signed integer.  This is no longer true, so
+   RE_DUP_MAX could be increased to (INT_MAX / 10 - 1), or to
+   ((SIZE_MAX - 2) / 10 - 1) if _REGEX_LARGE_OFFSETS is defined.
+   However, there would be a huge performance problem if someone
+   actually used a pattern like a\{214748363\}, so RE_DUP_MAX retains
+   its historical value.  */
+# define RE_DUP_MAX (0x7fff)
+
+#endif /* defined __USE_GNU_REGEX */
+
+
+/* POSIX `cflags' bits (i.e., information for `regcomp').  */
+
+/* If this bit is set, then use extended regular expression syntax.
+   If not set, then use basic regular expression syntax.  */
+#define REG_EXTENDED 1
+
+/* If this bit is set, then ignore case when matching.
+   If not set, then case is significant.  */
+#define REG_ICASE (1 << 1)
+
+/* If this bit is set, then anchors do not match at newline
+     characters in the string.
+   If not set, then anchors do match at newlines.  */
+#define REG_NEWLINE (1 << 2)
+
+/* If this bit is set, then report only success or fail in regexec.
+   If not set, then returns differ between not matching and errors.  */
+#define REG_NOSUB (1 << 3)
+
+
+/* POSIX `eflags' bits (i.e., information for regexec).  */
+
+/* If this bit is set, then the beginning-of-line operator doesn't match
+     the beginning of the string (presumably because it's not the
+     beginning of a line).
+   If not set, then the beginning-of-line operator does match the
+     beginning of the string.  */
+#define REG_NOTBOL 1
+
+/* Like REG_NOTBOL, except for the end-of-line.  */
+#define REG_NOTEOL (1 << 1)
+
+/* Use PMATCH[0] to delimit the start and end of the search in the
+   buffer.  */
+#define REG_STARTEND (1 << 2)
+
+
+/* If any error codes are removed, changed, or added, update the
+   `__re_error_msgid' table in regcomp.c.  */
+
+typedef enum
+{
+  _REG_ENOSYS = -1,     /* This will never happen for this implementation.  */
+  _REG_NOERROR = 0,     /* Success.  */
+  _REG_NOMATCH,         /* Didn't find a match (for regexec).  */
+
+  /* POSIX regcomp return error codes.  (In the order listed in the
+     standard.)  */
+  _REG_BADPAT,          /* Invalid pattern.  */
+  _REG_ECOLLATE,        /* Invalid collating element.  */
+  _REG_ECTYPE,          /* Invalid character class name.  */
+  _REG_EESCAPE,         /* Trailing backslash.  */
+  _REG_ESUBREG,         /* Invalid back reference.  */
+  _REG_EBRACK,          /* Unmatched left bracket.  */
+  _REG_EPAREN,          /* Parenthesis imbalance.  */
+  _REG_EBRACE,          /* Unmatched \{.  */
+  _REG_BADBR,           /* Invalid contents of \{\}.  */
+  _REG_ERANGE,          /* Invalid range end.  */
+  _REG_ESPACE,          /* Ran out of memory.  */
+  _REG_BADRPT,          /* No preceding re for repetition op.  */
+
+  /* Error codes we've added.  */
+  _REG_EEND,            /* Premature end.  */
+  _REG_ESIZE,           /* Compiled pattern bigger than 2^16 bytes.  */
+  _REG_ERPAREN          /* Unmatched ) or \); not returned from regcomp.  */
+} reg_errcode_t;
+
+#ifdef _XOPEN_SOURCE
+# define REG_ENOSYS     _REG_ENOSYS
+#endif
+#define REG_NOERROR     _REG_NOERROR
+#define REG_NOMATCH     _REG_NOMATCH
+#define REG_BADPAT      _REG_BADPAT
+#define REG_ECOLLATE    _REG_ECOLLATE
+#define REG_ECTYPE      _REG_ECTYPE
+#define REG_EESCAPE     _REG_EESCAPE
+#define REG_ESUBREG     _REG_ESUBREG
+#define REG_EBRACK      _REG_EBRACK
+#define REG_EPAREN      _REG_EPAREN
+#define REG_EBRACE      _REG_EBRACE
+#define REG_BADBR       _REG_BADBR
+#define REG_ERANGE      _REG_ERANGE
+#define REG_ESPACE      _REG_ESPACE
+#define REG_BADRPT      _REG_BADRPT
+#define REG_EEND        _REG_EEND
+#define REG_ESIZE       _REG_ESIZE
+#define REG_ERPAREN     _REG_ERPAREN
+
+/* struct re_pattern_buffer normally uses member names like `buffer'
+   that POSIX does not allow.  In POSIX mode these members have names
+   with leading `re_' (e.g., `re_buffer').  */
+#ifdef __USE_GNU_REGEX
+# define _REG_RE_NAME(id) id
+# define _REG_RM_NAME(id) id
+#else
+# define _REG_RE_NAME(id) re_##id
+# define _REG_RM_NAME(id) rm_##id
+#endif
+
+/* The user can specify the type of the re_translate member by
+   defining the macro RE_TRANSLATE_TYPE, which defaults to unsigned
+   char *.  This pollutes the POSIX name space, so in POSIX mode just
+   use unsigned char *.  */
+#ifdef __USE_GNU_REGEX
+# ifndef RE_TRANSLATE_TYPE
+#  define RE_TRANSLATE_TYPE unsigned char *
+# endif
+# define REG_TRANSLATE_TYPE RE_TRANSLATE_TYPE
+#else
+# define REG_TRANSLATE_TYPE unsigned char *
+#endif
+
+/* This data structure represents a compiled pattern.  Before calling
+   the pattern compiler, the fields `buffer', `allocated', `fastmap',
+   `translate', and `no_sub' can be set.  After the pattern has been
+   compiled, the `re_nsub' field is available.  All other fields are
+   private to the regex routines.  */
+
+struct re_pattern_buffer
+{
+  /* Space that holds the compiled pattern.  It is declared as
+     `unsigned char *' because its elements are sometimes used as
+     array indexes.  */
+  unsigned char *_REG_RE_NAME (buffer);
+
+  /* Number of bytes to which `buffer' points.  */
+  __re_long_size_t _REG_RE_NAME (allocated);
+
+  /* Number of bytes actually used in `buffer'.  */
+  __re_long_size_t _REG_RE_NAME (used);
+
+  /* Syntax setting with which the pattern was compiled.  */
+  reg_syntax_t _REG_RE_NAME (syntax);
+
+  /* Pointer to a fastmap, if any, otherwise zero.  re_search uses the
+     fastmap, if there is one, to skip over impossible starting points
+     for matches.  */
+  char *_REG_RE_NAME (fastmap);
+
+  /* Either a translate table to apply to all characters before
+     comparing them, or zero for no translation.  The translation is
+     applied to a pattern when it is compiled and to a string when it
+     is matched.  */
+  REG_TRANSLATE_TYPE _REG_RE_NAME (translate);
+
+  /* Number of subexpressions found by the compiler.  */
+  size_t re_nsub;
+
+  /* Zero if this pattern cannot match the empty string, one else.
+     Well, in truth it's used only in `re_search_2', to see whether or
+     not we should use the fastmap, so we don't set this absolutely
+     perfectly; see `re_compile_fastmap' (the `duplicate' case).  */
+  unsigned int _REG_RE_NAME (can_be_null) : 1;
+
+  /* If REGS_UNALLOCATED, allocate space in the `regs' structure
+     for `max (RE_NREGS, re_nsub + 1)' groups.
+     If REGS_REALLOCATE, reallocate space if necessary.
+     If REGS_FIXED, use what's there.  */
+#ifdef __USE_GNU_REGEX
+# define REGS_UNALLOCATED 0
+# define REGS_REALLOCATE 1
+# define REGS_FIXED 2
+#endif
+  unsigned int _REG_RE_NAME (regs_allocated) : 2;
+
+  /* Set to zero when `regex_compile' compiles a pattern; set to one
+     by `re_compile_fastmap' if it updates the fastmap.  */
+  unsigned int _REG_RE_NAME (fastmap_accurate) : 1;
+
+  /* If set, `re_match_2' does not return information about
+     subexpressions.  */
+  unsigned int _REG_RE_NAME (no_sub) : 1;
+
+  /* If set, a beginning-of-line anchor doesn't match at the beginning
+     of the string.  */
+  unsigned int _REG_RE_NAME (not_bol) : 1;
+
+  /* Similarly for an end-of-line anchor.  */
+  unsigned int _REG_RE_NAME (not_eol) : 1;
+
+  /* If true, an anchor at a newline matches.  */
+  unsigned int _REG_RE_NAME (newline_anchor) : 1;
+
+/* [[[end pattern_buffer]]] */
+};
+
+typedef struct re_pattern_buffer regex_t;
+
+/* This is the structure we store register match data in.  See
+   regex.texinfo for a full description of what registers match.  */
+struct re_registers
+{
+  __re_size_t _REG_RM_NAME (num_regs);
+  regoff_t *_REG_RM_NAME (start);
+  regoff_t *_REG_RM_NAME (end);
+};
+
+
+/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
+   `re_match_2' returns information about at least this many registers
+   the first time a `regs' structure is passed.  */
+#if !defined RE_NREGS && defined __USE_GNU_REGEX
+# define RE_NREGS 30
+#endif
+
+
+/* POSIX specification for registers.  Aside from the different names than
+   `re_registers', POSIX uses an array of structures, instead of a
+   structure of arrays.  */
+typedef struct
+{
+  regoff_t rm_so;  /* Byte offset from string's start to substring's start.  */
+  regoff_t rm_eo;  /* Byte offset from string's start to substring's end.  */
+} regmatch_t;
+
+/* Declarations for routines.  */
+
+/* Sets the current default syntax to SYNTAX, and return the old syntax.
+   You can also simply assign to the `re_syntax_options' variable.  */
+extern reg_syntax_t re_set_syntax (reg_syntax_t __syntax);
+
+/* Compile the regular expression PATTERN, with length LENGTH
+   and syntax given by the global `re_syntax_options', into the buffer
+   BUFFER.  Return NULL if successful, and an error string if not.  */
+extern const char *re_compile_pattern (const char *__pattern, size_t __length,
+                                       struct re_pattern_buffer *__buffer);
+
+
+/* Compile a fastmap for the compiled pattern in BUFFER; used to
+   accelerate searches.  Return 0 if successful and -2 if was an
+   internal error.  */
+extern int re_compile_fastmap (struct re_pattern_buffer *__buffer);
+
+
+/* Search in the string STRING (with length LENGTH) for the pattern
+   compiled into BUFFER.  Start searching at position START, for RANGE
+   characters.  Return the starting position of the match, -1 for no
+   match, or -2 for an internal error.  Also return register
+   information in REGS (if REGS and BUFFER->no_sub are nonzero).  */
+extern regoff_t re_search (struct re_pattern_buffer *__buffer,
+                           const char *__string, __re_idx_t __length,
+                           __re_idx_t __start, regoff_t __range,
+                           struct re_registers *__regs);
+
+
+/* Like `re_search', but search in the concatenation of STRING1 and
+   STRING2.  Also, stop searching at index START + STOP.  */
+extern regoff_t re_search_2 (struct re_pattern_buffer *__buffer,
+                             const char *__string1, __re_idx_t __length1,
+                             const char *__string2, __re_idx_t __length2,
+                             __re_idx_t __start, regoff_t __range,
+                             struct re_registers *__regs,
+                             __re_idx_t __stop);
+
+
+/* Like `re_search', but return how many characters in STRING the regexp
+   in BUFFER matched, starting at position START.  */
+extern regoff_t re_match (struct re_pattern_buffer *__buffer,
+                          const char *__string, __re_idx_t __length,
+                          __re_idx_t __start, struct re_registers *__regs);
+
+
+/* Relates to `re_match' as `re_search_2' relates to `re_search'.  */
+extern regoff_t re_match_2 (struct re_pattern_buffer *__buffer,
+                            const char *__string1, __re_idx_t __length1,
+                            const char *__string2, __re_idx_t __length2,
+                            __re_idx_t __start, struct re_registers *__regs,
+                            __re_idx_t __stop);
+
+
+/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
+   ENDS.  Subsequent matches using BUFFER and REGS will use this memory
+   for recording register information.  STARTS and ENDS must be
+   allocated with malloc, and must each be at least `NUM_REGS * sizeof
+   (regoff_t)' bytes long.
+
+   If NUM_REGS == 0, then subsequent matches should allocate their own
+   register data.
+
+   Unless this function is called, the first search or match using
+   PATTERN_BUFFER will allocate its own register data, without
+   freeing the old data.  */
+extern void re_set_registers (struct re_pattern_buffer *__buffer,
+                              struct re_registers *__regs,
+                              __re_size_t __num_regs,
+                              regoff_t *__starts, regoff_t *__ends);
+
+#if defined _REGEX_RE_COMP || defined _LIBC
+# ifndef _CRAY
+/* 4.2 bsd compatibility.  */
+extern char *re_comp (const char *);
+extern int re_exec (const char *);
+# endif
+#endif
+
+/* GCC 2.95 and later have "__restrict"; C99 compilers have
+   "restrict", and "configure" may have defined "restrict".  */
+#ifndef __restrict
+# if ! (2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__))
+#  if defined restrict || 199901L <= __STDC_VERSION__
+#   define __restrict restrict
+#  else
+#   define __restrict
+#  endif
+# endif
+#endif
+/* gcc 3.1 and up support the [restrict] syntax.  Don't trust
+   sys/cdefs.h's definition of __restrict_arr, though, as it
+   mishandles gcc -ansi -pedantic.  */
+#undef __restrict_arr
+#if ((199901L <= __STDC_VERSION__                                       \
+      || ((3 < __GNUC__ || (3 == __GNUC__ && 1 <= __GNUC_MINOR__))      \
+          && !__STRICT_ANSI__))                                         \
+     && !defined __GNUG__)
+# define __restrict_arr __restrict
+#else
+# define __restrict_arr
+#endif
+
+/* POSIX compatibility.  */
+extern int regcomp (regex_t *__restrict __preg,
+                    const char *__restrict __pattern,
+                    int __cflags);
+
+extern int regexec (const regex_t *__restrict __preg,
+                    const char *__restrict __string, size_t __nmatch,
+                    regmatch_t __pmatch[__restrict_arr],
+                    int __eflags);
+
+extern size_t regerror (int __errcode, const regex_t *__restrict __preg,
+                        char *__restrict __errbuf, size_t __errbuf_size);
+
+extern void regfree (regex_t *__preg);
+
+
+#ifdef __cplusplus
+}
+#endif  /* C++ */
+
+#endif /* regex.h */