summaryrefslogtreecommitdiffstats
path: root/plugins-scripts
diff options
context:
space:
mode:
Diffstat (limited to 'plugins-scripts')
-rwxr-xr-xplugins-scripts/check_breeze.pl2
-rwxr-xr-xplugins-scripts/check_disk_smb.pl2
-rwxr-xr-xplugins-scripts/check_file_age.pl4
-rwxr-xr-xplugins-scripts/check_flexlm.pl2
-rwxr-xr-xplugins-scripts/check_ifoperstatus.pl4
-rwxr-xr-xplugins-scripts/check_ifstatus.pl3
-rwxr-xr-xplugins-scripts/check_ircd.pl6
-rwxr-xr-xplugins-scripts/check_log.sh3
-rwxr-xr-xplugins-scripts/check_mailq.pl2
-rwxr-xr-xplugins-scripts/check_mssql.pl4
-rwxr-xr-xplugins-scripts/check_netdns.pl4
-rwxr-xr-xplugins-scripts/check_ntp.pl471
-rwxr-xr-xplugins-scripts/check_oracle.sh1
-rwxr-xr-xplugins-scripts/check_rpc.pl4
-rwxr-xr-xplugins-scripts/check_sensors.sh5
-rwxr-xr-xplugins-scripts/check_wave.pl2
-rw-r--r--plugins-scripts/subst.in12
17 files changed, 506 insertions, 25 deletions
diff --git a/plugins-scripts/check_breeze.pl b/plugins-scripts/check_breeze.pl
index 5ff4fcfa..917a1c6f 100755
--- a/plugins-scripts/check_breeze.pl
+++ b/plugins-scripts/check_breeze.pl
@@ -13,7 +13,7 @@ $PROGNAME = "check_breeze";
13sub print_help (); 13sub print_help ();
14sub print_usage (); 14sub print_usage ();
15 15
16$ENV{'PATH'}=''; 16$ENV{'PATH'}='@trusted_path@';
17$ENV{'BASH_ENV'}=''; 17$ENV{'BASH_ENV'}='';
18$ENV{'ENV'}=''; 18$ENV{'ENV'}='';
19 19
diff --git a/plugins-scripts/check_disk_smb.pl b/plugins-scripts/check_disk_smb.pl
index b0a61144..36259d59 100755
--- a/plugins-scripts/check_disk_smb.pl
+++ b/plugins-scripts/check_disk_smb.pl
@@ -33,7 +33,7 @@ sub print_usage ();
33 33
34$PROGNAME = "check_disk_smb"; 34$PROGNAME = "check_disk_smb";
35 35
36$ENV{'PATH'}=''; 36$ENV{'PATH'}='@trusted_path@';
37$ENV{'BASH_ENV'}=''; 37$ENV{'BASH_ENV'}='';
38$ENV{'ENV'}=''; 38$ENV{'ENV'}='';
39 39
diff --git a/plugins-scripts/check_file_age.pl b/plugins-scripts/check_file_age.pl
index 2781c2ac..e0280381 100755
--- a/plugins-scripts/check_file_age.pl
+++ b/plugins-scripts/check_file_age.pl
@@ -36,6 +36,10 @@ my ($result, $message, $age, $size, $st);
36 36
37$PROGNAME="check_file_age"; 37$PROGNAME="check_file_age";
38 38
39$ENV{'PATH'}='@trusted_path@';
40$ENV{'BASH_ENV'}='';
41$ENV{'ENV'}='';
42
39$opt_w = 240; 43$opt_w = 240;
40$opt_c = 600; 44$opt_c = 600;
41$opt_W = 0; 45$opt_W = 0;
diff --git a/plugins-scripts/check_flexlm.pl b/plugins-scripts/check_flexlm.pl
index a0b007fb..de63d3ab 100755
--- a/plugins-scripts/check_flexlm.pl
+++ b/plugins-scripts/check_flexlm.pl
@@ -44,7 +44,7 @@ $PROGNAME="check_flexlm";
44sub print_help (); 44sub print_help ();
45sub print_usage (); 45sub print_usage ();
46 46
47$ENV{'PATH'}=''; 47$ENV{'PATH'}='@trusted_path@';
48$ENV{'BASH_ENV'}=''; 48$ENV{'BASH_ENV'}='';
49$ENV{'ENV'}=''; 49$ENV{'ENV'}='';
50 50
diff --git a/plugins-scripts/check_ifoperstatus.pl b/plugins-scripts/check_ifoperstatus.pl
index 26fae76d..159eb62e 100755
--- a/plugins-scripts/check_ifoperstatus.pl
+++ b/plugins-scripts/check_ifoperstatus.pl
@@ -49,6 +49,10 @@ sub usage ($);
49sub print_usage (); 49sub print_usage ();
50sub process_arguments (); 50sub process_arguments ();
51 51
52$ENV{'PATH'}='@trusted_path@';
53$ENV{'BASH_ENV'}='';
54$ENV{'ENV'}='';
55
52my $timeout; 56my $timeout;
53my $status; 57my $status;
54my %ifOperStatus = ('1','up', 58my %ifOperStatus = ('1','up',
diff --git a/plugins-scripts/check_ifstatus.pl b/plugins-scripts/check_ifstatus.pl
index 588e5df3..4760a281 100755
--- a/plugins-scripts/check_ifstatus.pl
+++ b/plugins-scripts/check_ifstatus.pl
@@ -47,6 +47,9 @@ sub usage ($);
47sub print_usage (); 47sub print_usage ();
48sub process_arguments (); 48sub process_arguments ();
49 49
50$ENV{'PATH'}='@trusted_path@';
51$ENV{'BASH_ENV'}='';
52$ENV{'ENV'}='';
50 53
51my $status; 54my $status;
52my %ifOperStatus = ('1','up', 55my %ifOperStatus = ('1','up',
diff --git a/plugins-scripts/check_ircd.pl b/plugins-scripts/check_ircd.pl
index e45e9fc1..dab65954 100755
--- a/plugins-scripts/check_ircd.pl
+++ b/plugins-scripts/check_ircd.pl
@@ -62,9 +62,9 @@ sub bindRemote ($$);
62 62
63# -------------------------------------------------------------[ Enviroment ]-- 63# -------------------------------------------------------------[ Enviroment ]--
64 64
65$ENV{PATH} = ""; 65$ENV{'PATH'}='@trusted_path@';
66$ENV{ENV} = ""; 66$ENV{'BASH_ENV'}='';
67$ENV{BASH_ENV} = ""; 67$ENV{'ENV'}='';
68 68
69# -----------------------------------------------------------------[ Global ]-- 69# -----------------------------------------------------------------[ Global ]--
70 70
diff --git a/plugins-scripts/check_log.sh b/plugins-scripts/check_log.sh
index 54408cbd..be4c7be1 100755
--- a/plugins-scripts/check_log.sh
+++ b/plugins-scripts/check_log.sh
@@ -57,8 +57,6 @@
57 57
58# Paths to commands used in this script. These 58# Paths to commands used in this script. These
59# may have to be modified to match your system setup. 59# may have to be modified to match your system setup.
60# TV: removed PATH restriction. Need to think more about what this means overall
61#PATH=""
62 60
63GREP="/bin/egrep" 61GREP="/bin/egrep"
64DIFF="/bin/diff" 62DIFF="/bin/diff"
@@ -71,6 +69,7 @@ TOUCH="/bin/touch"
71PROGNAME=`/bin/basename $0` 69PROGNAME=`/bin/basename $0`
72PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'` 70PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'`
73REVISION="@NP_VERSION@" 71REVISION="@NP_VERSION@"
72PATH="@trusted_path@"
74 73
75. $PROGPATH/utils.sh 74. $PROGPATH/utils.sh
76 75
diff --git a/plugins-scripts/check_mailq.pl b/plugins-scripts/check_mailq.pl
index a7de87bf..488cf2f1 100755
--- a/plugins-scripts/check_mailq.pl
+++ b/plugins-scripts/check_mailq.pl
@@ -40,7 +40,7 @@ sub print_help ();
40sub print_usage (); 40sub print_usage ();
41sub process_arguments (); 41sub process_arguments ();
42 42
43$ENV{'PATH'}=''; 43$ENV{'PATH'}='@trusted_path@';
44$ENV{'BASH_ENV'}=''; 44$ENV{'BASH_ENV'}='';
45$ENV{'ENV'}=''; 45$ENV{'ENV'}='';
46$PROGNAME = "check_mailq"; 46$PROGNAME = "check_mailq";
diff --git a/plugins-scripts/check_mssql.pl b/plugins-scripts/check_mssql.pl
index e3e7391d..cf23ae82 100755
--- a/plugins-scripts/check_mssql.pl
+++ b/plugins-scripts/check_mssql.pl
@@ -35,6 +35,10 @@ use strict;
35 35
36my $PROGNAME = "check_mssql"; 36my $PROGNAME = "check_mssql";
37 37
38$ENV{'PATH'}='@trusted_path@';
39$ENV{'BASH_ENV'}='';
40$ENV{'ENV'}='';
41
38my ( 42my (
39 $server,$database,$username,$password,$query,$help,$verbose,$timeout, 43 $server,$database,$username,$password,$query,$help,$verbose,$timeout,
40 $dbh,$sth,$row, 44 $dbh,$sth,$row,
diff --git a/plugins-scripts/check_netdns.pl b/plugins-scripts/check_netdns.pl
index 5b246429..6e0d02d1 100755
--- a/plugins-scripts/check_netdns.pl
+++ b/plugins-scripts/check_netdns.pl
@@ -33,6 +33,10 @@ use utils ;
33 33
34my $PROGNAME = "check_netdns"; 34my $PROGNAME = "check_netdns";
35 35
36$ENV{'PATH'}='@trusted_path@';
37$ENV{'BASH_ENV'}='';
38$ENV{'ENV'}='';
39
36Getopt::Long::Configure(`bundling`); 40Getopt::Long::Configure(`bundling`);
37GetOptions("V" => $opt_V, "version" => $opt_V, 41GetOptions("V" => $opt_V, "version" => $opt_V,
38 "h" => $opt_h, "help" => $opt_h, 42 "h" => $opt_h, "help" => $opt_h,
diff --git a/plugins-scripts/check_ntp.pl b/plugins-scripts/check_ntp.pl
new file mode 100755
index 00000000..cdcbffac
--- /dev/null
+++ b/plugins-scripts/check_ntp.pl
@@ -0,0 +1,471 @@
1#!/usr/bin/perl -w
2#
3# (c)1999 Ian Cass, Knowledge Matters Ltd.
4# Read the GNU copyright stuff for all the legalese
5#
6# Check NTP time servers plugin. This plugin requires the ntpdate utility to
7# be installed on the system, however since it's part of the ntp suite, you
8# should already have it installed.
9#
10#
11# Nothing clever done in this program - its a very simple bare basics hack to
12# get the job done.
13#
14# Things to do...
15# check @words[9] for time differences greater than +/- x secs & return a
16# warning.
17#
18# (c) 1999 Mark Jewiss, Knowledge Matters Limited
19# 22-9-1999, 12:45
20#
21# Modified script to accept 2 parameters or set defaults.
22# Now issues warning or critical alert is time difference is greater than the
23# time passed.
24#
25# These changes have not been tested completely due to the unavailability of a
26# server with the incorrect time.
27#
28# (c) 1999 Bo Kersey, VirCIO - Managed Server Solutions <bo@vircio.com>
29# 22-10-99, 12:17
30#
31# Modified the script to give useage if no parameters are input.
32#
33# Modified the script to check for negative as well as positive
34# time differences.
35#
36# Modified the script to work with ntpdate 3-5.93e Wed Apr 14 20:23:03 EDT 1999
37#
38# Modified the script to work with ntpdate's that return adjust or offset...
39#
40#
41# Script modified 2000 June 01 by William Pietri <william@bianca.com>
42#
43# Modified script to handle weird cases:
44# o NTP server doesn't respond (e.g., has died)
45# o Server has correct time but isn't suitable synchronization
46# source. This happens while starting up and if contact
47# with master has been lost.
48#
49# Modifed to run under Embedded Perl (sghosh@users.sf.net)
50# - combined logic some blocks together..
51#
52# Added ntpdate check for stratum 16 desynch peer (James Fidell) Feb 03, 2003
53#
54# ntpdate - offset is in seconds
55# changed ntpdc to ntpq - jitter/dispersion is in milliseconds
56#
57# Patch for for regex for stratum1 refid.
58
59require 5.004;
60use POSIX;
61use strict;
62use Getopt::Long;
63use vars qw($opt_V $opt_h $opt_H $opt_t $opt_w $opt_c $opt_O $opt_j $opt_k $verbose $PROGNAME $def_jitter $ipv4 $ipv6);
64use lib utils.pm;
65use utils qw($TIMEOUT %ERRORS &print_revision &support);
66
67$PROGNAME="check_ntp";
68
69sub print_help ();
70sub print_usage ();
71
72$ENV{'PATH'}='@trusted_path@';
73$ENV{'BASH_ENV'}='';
74$ENV{'ENV'}='';
75
76# defaults in sec
77my $DEFAULT_OFFSET_WARN = 60; # 1 minute
78my $DEFAULT_OFFSET_CRIT = 120; # 2 minutes
79# default in millisec
80my $DEFAULT_JITTER_WARN = 5000; # 5 sec
81my $DEFAULT_JITTER_CRIT = 10000; # 10 sec
82
83Getopt::Long::Configure('bundling');
84GetOptions
85 ("V" => \$opt_V, "version" => \$opt_V,
86 "h" => \$opt_h, "help" => \$opt_h,
87 "v" => \$verbose, "verbose" => \$verbose,
88 "4" => \$ipv4, "use-ipv4" => \$ipv4,
89 "6" => \$ipv6, "use-ipv6" => \$ipv6,
90 "w=f" => \$opt_w, "warning=f" => \$opt_w, # offset|adjust warning if above this number
91 "c=f" => \$opt_c, "critical=f" => \$opt_c, # offset|adjust critical if above this number
92 "O" => \$opt_O, "zero-offset" => \$opt_O, # zero-offset bad
93 "j=s" => \$opt_j, "jwarn=i" => \$opt_j, # jitter warning if above this number
94 "k=s" => \$opt_k, "jcrit=i" => \$opt_k, # jitter critical if above this number
95 "t=s" => \$opt_t, "timeout=i" => \$opt_t,
96 "H=s" => \$opt_H, "hostname=s" => \$opt_H);
97
98if ($opt_V) {
99 print_revision($PROGNAME,'@NP_VERSION@');
100 exit $ERRORS{'OK'};
101}
102
103if ($opt_h) {
104 print_help();
105 exit $ERRORS{'OK'};
106}
107
108# jitter test params specified
109if (defined $opt_j || defined $opt_k ) {
110 $def_jitter = 1;
111}
112
113$opt_H = shift unless ($opt_H);
114my $host = $1 if ($opt_H && $opt_H =~ m/^([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+|[a-zA-Z][-a-zA-Z0-9]+(\.[a-zA-Z][-a-zA-Z0-9]+)*)$/);
115unless ($host) {
116 print "No target host specified\n";
117 print_usage();
118 exit $ERRORS{'UNKNOWN'};
119}
120
121my ($timeout, $owarn, $ocrit, $jwarn, $jcrit);
122
123$timeout = $TIMEOUT;
124($opt_t) && ($opt_t =~ /^([0-9]+)$/) && ($timeout = $1);
125
126$owarn = $DEFAULT_OFFSET_WARN;
127($opt_w) && ($opt_w =~ /^([0-9.]+)$/) && ($owarn = $1);
128
129$ocrit = $DEFAULT_OFFSET_CRIT;
130($opt_c) && ($opt_c =~ /^([0-9.]+)$/) && ($ocrit = $1);
131
132$jwarn = $DEFAULT_JITTER_WARN;
133($opt_j) && ($opt_j =~ /^([0-9]+)$/) && ($jwarn = $1);
134
135$jcrit = $DEFAULT_JITTER_CRIT;
136($opt_k) && ($opt_k =~ /^([0-9]+)$/) && ($jcrit = $1);
137
138if ($ocrit < $owarn ) {
139 print "Critical offset should be larger than warning offset\n";
140 print_usage();
141 exit $ERRORS{"UNKNOWN"};
142}
143
144if ($def_jitter) {
145 if ($opt_k < $opt_j) {
146 print "Critical jitter should be larger than warning jitter\n";
147 print_usage();
148 exit $ERRORS{'UNKNOWN'};
149 }
150}
151
152
153my $stratum = -1;
154my $ignoreret = 0;
155my $answer = undef;
156my $offset = undef;
157my $jitter = undef;
158my $syspeer = undef;
159my $candidate = 0;
160my @candidates;
161my $msg; # first line of output to print if format is invalid
162
163my $state = $ERRORS{'UNKNOWN'};
164my $ntpdate_error = $ERRORS{'UNKNOWN'};
165my $jitter_error = $ERRORS{'UNKNOWN'};
166
167# some systems don't have a proper ntpq (migrated from ntpdc)
168my $have_ntpq = undef;
169if ($utils::PATH_TO_NTPQ && -x $utils::PATH_TO_NTPQ ) {
170 $have_ntpq = 1;
171}else{
172 $have_ntpq = 0;
173}
174
175# Just in case of problems, let's not hang Nagios
176$SIG{'ALRM'} = sub {
177 print ("ERROR: No response from ntp server (alarm)\n");
178 exit $ERRORS{"UNKNOWN"};
179};
180alarm($timeout);
181
182# Determine protocol to be used for ntpdate and ntpq
183my $ntpdate = $utils::PATH_TO_NTPDATE;
184my $ntpq = $utils::PATH_TO_NTPQ;
185if ($ipv4) {
186 $ntpdate .= " -4";
187 $ntpq .= " -4";
188}
189elsif ($ipv6) {
190 $ntpdate .= " -6";
191 $ntpq .= " -6";
192}
193# else don't use any flags
194
195###
196###
197### First, check ntpdate
198###
199###
200
201if (!open (NTPDATE, $ntpdate . " -q $host 2>&1 |")) {
202 print "Could not open $ntpdate: $!\n";
203 exit $ERRORS{"UNKNOWN"};
204}
205
206my $out;
207while (<NTPDATE>) {
208 #print if ($verbose); # noop
209 $msg = $_ unless ($msg);
210 $out .= "$_ ";
211
212 if (/stratum\s(\d+)/) {
213 $stratum = $1;
214 }
215
216 if (/(offset|adjust)\s+([-.\d]+)/i) {
217 $offset = $2;
218
219 # An offset of 0.000000 with an error is probably bogus. Actually,
220 # it's probably always bogus, but let's be paranoid here.
221 # Has been reported that 0.0000 happens in a production environment
222 # on Solaris 8 so this check should be taken out - SF tracker 1150777
223 if (defined $opt_O ) {
224 if ($offset == 0) { undef $offset;}
225 }
226
227 $ntpdate_error = defined ($offset) ? $ERRORS{"OK"} : $ERRORS{"CRITICAL"};
228 print "ntperr = $ntpdate_error \n" if $verbose;
229
230 }
231
232 if (/no server suitable for synchronization found/) {
233 if ($stratum == 16) {
234 $ntpdate_error = $ERRORS{"WARNING"};
235 $msg = "Desynchronized peer server found";
236 $ignoreret=1;
237 }
238 else {
239 $ntpdate_error = $ERRORS{"CRITICAL"};
240 $msg = "No suitable peer server found - ";
241 }
242 }
243
244}
245$out =~ s/\n//g;
246close (NTPDATE) ||
247 die $! ? "$out - Error closing $ntpdate pipe: $!"
248 : "$out - Exit status: $? from $ntpdate\n";
249
250# declare an error if we also get a non-zero return code from ntpdate
251# unless already set to critical
252if ( $? && !$ignoreret ) {
253 print "stderr = $? : $! \n" if $verbose;
254 $ntpdate_error = $ntpdate_error == $ERRORS{"CRITICAL"} ? $ERRORS{"CRITICAL"} : $ERRORS{"UNKNOWN"} ;
255 print "ntperr = $ntpdate_error : $!\n" if $verbose;
256}
257
258###
259###
260### Then scan xntpq/ntpq if it exists
261### and look in the 11th column for jitter
262###
263# Field 1: Tally Code ( Space, 'x','.','-','+','#','*','o')
264# Only match for '*' which implies sys.peer
265# or 'o' which implies pps.peer
266# If both exist, the last one is picked.
267# Field 2: address of the remote peer
268# Field 3: Refid of the clock (0.0.0.0 if unknown, WWWV/PPS/GPS/ACTS/USNO/PCS/... if Stratum1)
269# Field 4: stratum (0-15)
270# Field 5: Type of the peer: local (l), unicast (u), multicast (m)
271# broadcast (b); not sure about multicast/broadcast
272# Field 6: last packet receive (in seconds)
273# Field 7: polling interval
274# Field 8: reachability resgister (octal)
275# Field 9: delay
276# Field 10: offset
277# Field 11: dispersion/jitter
278#
279# According to bug 773588 Some solaris xntpd implementations seemto match on
280# "#" even though the docs say it exceeds maximum distance. Providing patch
281# here which will generate a warining.
282
283if ($have_ntpq) {
284
285 if ( open(NTPQ, $ntpq . " -np $host 2>&1 |") ) {
286 while (<NTPQ>) {
287 print $_ if ($verbose);
288 if ( /timed out/ ){
289 $have_ntpq = 0 ;
290 last ;
291 }
292 # number of candidates on <host> for sys.peer
293 if (/^(\*|\+|\#|o])/) {
294 ++$candidate;
295 push (@candidates, $_);
296 print "Candidate count= $candidate\n" if ($verbose);
297 }
298
299 # match sys.peer or pps.peer
300 if (/^(\*|o)(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+)/) {
301 $syspeer = $2;
302 $stratum = $4;
303 $jitter = $11;
304 print "match $_ \n" if $verbose;
305 if ($jitter > $jcrit) {
306 print "Jitter_crit = $11 :$jcrit\n" if ($verbose);
307 $jitter_error = $ERRORS{'CRITICAL'};
308 } elsif ($jitter > $jwarn ) {
309 print "Jitter_warn = $11 :$jwarn\n" if ($verbose);
310 $jitter_error = $ERRORS{'WARNING'};
311 } else {
312 $jitter_error = $ERRORS{'OK'};
313 }
314 } else {
315 print "No match!\n" if $verbose;
316 $jitter = '(not parsed)';
317 }
318
319 }
320 close NTPQ ||
321 die $! ? "Error closing $ntpq pipe: $!"
322 : "Exit status: $? from $ntpq\n";
323
324 # if we did not match sys.peer or pps.peer but matched # candidates only
325 # generate a warning
326 # based on bug id 773588
327 unless (defined $syspeer) {
328 if ($#candidates >=0) {
329 foreach my $c (@candidates) {
330 $c =~ /^(#)([-0-9.\s]+)\s+([-0-9A-Za-z_().]+)\s+([-0-9.]+)\s+([lumb-]+)\s+([-0-9m.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)\s+([-0-9.]+)/;
331 $syspeer = $2;
332 $stratum = $4;
333 $jitter = $11;
334 print "candidate match $c \n" if $verbose;
335 if ($jitter > $jcrit) {
336 print "Candidate match - Jitter_crit = $11 :$jcrit\n" if ($verbose);
337 $jitter_error = $ERRORS{'CRITICAL'};
338 }elsif ($jitter > $jwarn ) {
339 print "Candidate match - Jitter_warn = $11 :$jwarn \n" if ($verbose);
340 $jitter_error = $ERRORS{'WARNING'};
341 } else {
342 $jitter_error = $ERRORS{'WARNING'};
343 }
344 }
345
346 }
347 }
348 }
349}
350
351
352if ($ntpdate_error != $ERRORS{'OK'}) {
353 $state = $ntpdate_error;
354 if ($ntpdate_error == $ERRORS{'WARNING'} ) {
355 $answer = $msg;
356 }
357 else {
358 $answer = $msg . "Server for ntp probably down";
359 }
360
361 if (defined($offset) && abs($offset) > $ocrit) {
362 $state = $ERRORS{'CRITICAL'};
363 $answer = "Server Error and offset $offset sec > +/- $ocrit sec";
364 } elsif (defined($offset) && abs($offset) > $owarn) {
365 $answer = "Server error and offset $offset sec > +/- $owarn sec";
366 } elsif (defined($jitter) && abs($jitter) > $jcrit) {
367 $answer = "Server error and jitter $jitter msec > +/- $jcrit msec";
368 } elsif (defined($jitter) && abs($jitter) > $jwarn) {
369 $answer = "Server error and jitter $jitter msec > +/- $jwarn msec";
370 }
371
372} elsif ($have_ntpq && $jitter_error != $ERRORS{'OK'}) {
373 $state = $jitter_error;
374 $answer = "Jitter $jitter too high";
375 if (defined($offset) && abs($offset) > $ocrit) {
376 $state = $ERRORS{'CRITICAL'};
377 $answer = "Jitter error and offset $offset sec > +/- $ocrit sec";
378 } elsif (defined($offset) && abs($offset) > $owarn) {
379 $answer = "Jitter error and offset $offset sec > +/- $owarn sec";
380 } elsif (defined($jitter) && abs($jitter) > $jcrit) {
381 $answer = "Jitter error and jitter $jitter msec > +/- $jcrit msec";
382 } elsif (defined($jitter) && abs($jitter) > $jwarn) {
383 $answer = "Jitter error and jitter $jitter msec > +/- $jwarn msec";
384 }
385
386} elsif( !$have_ntpq ) { # no errors from ntpdate and no ntpq or ntpq timed out
387 if (abs($offset) > $ocrit) {
388 $state = $ERRORS{'CRITICAL'};
389 $answer = "Offset $offset sec > +/- $ocrit sec";
390 } elsif (abs($offset) > $owarn) {
391 $state = $ERRORS{'WARNING'};
392 $answer = "Offset $offset sec > +/- $owarn sec";
393 } elsif (( abs($offset) > $owarn) && $def_jitter ) {
394 $state = $ERRORS{'WARNING'};
395 $answer = "Offset $offset sec > +/- $owarn sec, ntpq timed out";
396 } elsif ( $def_jitter ) {
397 $state = $ERRORS{'WARNING'};
398 $answer = "Offset $offset secs, ntpq timed out";
399 } else{
400 $state = $ERRORS{'OK'};
401 $answer = "Offset $offset secs";
402 }
403
404
405
406} else { # no errors from ntpdate or ntpq
407 if (abs($offset) > $ocrit) {
408 $state = $ERRORS{'CRITICAL'};
409 $answer = "Offset $offset sec > +/- $ocrit sec, jitter $jitter msec";
410 } elsif (abs($jitter) > $jcrit ) {
411 $state = $ERRORS{'CRITICAL'};
412 $answer = "Jitter $jitter msec> +/- $jcrit msec, offset $offset sec";
413 } elsif (abs($offset) > $owarn) {
414 $state = $ERRORS{'WARNING'};
415 $answer = "Offset $offset sec > +/- $owarn sec, jitter $jitter msec";
416 } elsif (abs($jitter) > $jwarn ) {
417 $state = $ERRORS{'WARNING'};
418 $answer = "Jitter $jitter msec> +/- $jwarn msec, offset $offset sec";
419
420 } else {
421 $state = $ERRORS{'OK'};
422 $answer = "Offset $offset secs, jitter $jitter msec, peer is stratum $stratum";
423 }
424
425}
426
427foreach my $key (keys %ERRORS) {
428 if ($state==$ERRORS{$key}) {
429# print ("NTP $key: $answer");
430 print ("NTP $key: $answer|offset=$offset, jitter=" . $jitter/1000 . ",peer_stratum=$stratum\n");
431 last;
432 }
433}
434exit $state;
435
436
437####
438#### subs
439
440sub print_usage () {
441 print "Usage: $PROGNAME -H <host> [-46] [-O] [-w <warn>] [-c <crit>] [-j <warn>] [-k <crit>] [-v verbose]\n";
442}
443
444sub print_help () {
445 print_revision($PROGNAME,'@NP_VERSION@');
446 print "Copyright (c) 2003 Bo Kersey/Karl DeBisschop\n";
447 print "\n";
448 print_usage();
449 print "
450Checks the local timestamp offset versus <host> with ntpdate
451Checks the jitter/dispersion of clock signal between <host> and its sys.peer with ntpq\n
452-O (--zero-offset)
453 A zero offset on \"ntpdate\" will generate a CRITICAL.\n
454-w (--warning)
455 Clock offset in seconds at which a warning message will be generated.\n Defaults to $DEFAULT_OFFSET_WARN.
456-c (--critical)
457 Clock offset in seconds at which a critical message will be generated.\n Defaults to $DEFAULT_OFFSET_CRIT.
458-j (--jwarn)
459 Clock jitter in milliseconds at which a warning message will be generated.\n Defaults to $DEFAULT_JITTER_WARN.
460-k (--jcrit)
461 Clock jitter in milliseconds at which a critical message will be generated.\n Defaults to $DEFAULT_JITTER_CRIT.
462
463 If jitter/dispersion is specified with -j or -k and ntpq times out, then a
464 warning is returned.\n
465-4 (--use-ipv4)
466 Use IPv4 connection
467-6 (--use-ipv6)
468 Use IPv6 connection
469\n";
470support();
471}
diff --git a/plugins-scripts/check_oracle.sh b/plugins-scripts/check_oracle.sh
index b653372e..efa1df19 100755
--- a/plugins-scripts/check_oracle.sh
+++ b/plugins-scripts/check_oracle.sh
@@ -9,6 +9,7 @@
9PROGNAME=`basename $0` 9PROGNAME=`basename $0`
10PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'` 10PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'`
11REVISION="@NP_VERSION@" 11REVISION="@NP_VERSION@"
12PATH="@trusted_path@"
12 13
13. $PROGPATH/utils.sh 14. $PROGPATH/utils.sh
14 15
diff --git a/plugins-scripts/check_rpc.pl b/plugins-scripts/check_rpc.pl
index 3a6f7179..f7fe0321 100755
--- a/plugins-scripts/check_rpc.pl
+++ b/plugins-scripts/check_rpc.pl
@@ -37,9 +37,9 @@ sub print_help ();
37sub print_usage (); 37sub print_usage ();
38sub in ($$); 38sub in ($$);
39 39
40$ENV{'BASH_ENV'}=''; 40$ENV{'PATH'}='@trusted_path@';
41$ENV{'BASH_ENV'}='';
41$ENV{'ENV'}=''; 42$ENV{'ENV'}='';
42$ENV{'PATH'}='';
43$ENV{'LC_ALL'}='C'; 43$ENV{'LC_ALL'}='C';
44 44
45#Initialise protocol for each progname number 45#Initialise protocol for each progname number
diff --git a/plugins-scripts/check_sensors.sh b/plugins-scripts/check_sensors.sh
index 874e1049..53db9b49 100755
--- a/plugins-scripts/check_sensors.sh
+++ b/plugins-scripts/check_sensors.sh
@@ -1,14 +1,13 @@
1#!/bin/sh 1#!/bin/sh
2 2
3PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
4
5PROGNAME=`basename $0` 3PROGNAME=`basename $0`
6PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'` 4PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'`
7REVISION="@NP_VERSION@" 5REVISION="@NP_VERSION@"
6TRUSTED_PATH="@trusted_path@"
7PATH=${TRUSTED_PATH:-"/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin"}
8 8
9. $PROGPATH/utils.sh 9. $PROGPATH/utils.sh
10 10
11
12print_usage() { 11print_usage() {
13 echo "Usage: $PROGNAME" [--ignore-fault] 12 echo "Usage: $PROGNAME" [--ignore-fault]
14} 13}
diff --git a/plugins-scripts/check_wave.pl b/plugins-scripts/check_wave.pl
index b8ec3f03..51927534 100755
--- a/plugins-scripts/check_wave.pl
+++ b/plugins-scripts/check_wave.pl
@@ -16,7 +16,7 @@ $PROGNAME = "check_wave";
16sub print_help (); 16sub print_help ();
17sub print_usage (); 17sub print_usage ();
18 18
19$ENV{'PATH'}=''; 19$ENV{'PATH'}='@trusted_path@';
20$ENV{'BASH_ENV'}=''; 20$ENV{'BASH_ENV'}='';
21$ENV{'ENV'}=''; 21$ENV{'ENV'}='';
22 22
diff --git a/plugins-scripts/subst.in b/plugins-scripts/subst.in
index 66777d75..c730b770 100644
--- a/plugins-scripts/subst.in
+++ b/plugins-scripts/subst.in
@@ -45,17 +45,9 @@ BEGIN {
45 sub(c,which(c,path)); 45 sub(c,which(c,path));
46} 46}
47 47
48# Trusted path mechanism (deprecated) 48# Trusted path mechanism
49 49/@trusted_path@/ {sub(/@trusted_path@/,"@with_trusted_path@");}
50/^[ \t]*\$ENV[ \t]*\{[ \t'"]*PATH[ \t"']*\}[ \t]*=/ {
51 sub(/\=[ \t]*['"][^"']+["']/,"='@with_trusted_path@' # autoconf-derived");
52}
53
54/^[\t ]*(export[\t ]*)?PATH[\t ]*=['"]+.+["']$/ {
55 sub(/\=.*$/,"='@with_trusted_path@' # autoconf-derived");
56}
57 50
58{ 51{
59 print; 52 print;
60} 53}
61