1 files changed, 0 insertions, 5426 deletions
diff --git a/po/fr.po b/po/fr.po
deleted file mode 100644
index a85945a..0000000
--- a/po/fr.po
+++ /dev/null
@@ -1,5426 +0,0 @@
-# translation of fr.po to
-# Messages français pour Nagios Plugins
-# Copyright (C) 2003-2023 Nagios Plugin Development Group
-# This file is distributed under the same license as the nagiosplug package.
-#
-# Karl DeBisschop <kdebisschop@users.sourceforge.net>, 2003.
-# Benoit Mortier <benoit.mortier@opensides.be>, 2004, 2006, 2007.
-# Thomas Guyot-Sionnest <dermoth@aei.ca>, 2007.
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: devel@monitoring-plugins.org\n"
-"POT-Creation-Date: 2023-10-01 00:46+0200\n"
-"PO-Revision-Date: 2010-04-21 23:38-0400\n"
-"Last-Translator: \n"
-"Language-Team: Monitoring Plugin Development Team <devel@monitoring-plugins."
-"org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms:  nplurals=2; plural=(n != 1);\n"
-"X-Generator: KBabel 1.11.4\n"
-msgid "Could not parse arguments"
-msgstr "Impossible de décomposer les arguments"
-msgid "Cannot catch SIGALRM"
-msgstr "Impossible d'obtenir le signal SIGALRM"
-#, fuzzy, c-format
-msgid "SSH connection failed: %s\n"
-msgstr "L'exécution de la commande à distance %s à échoué\n"
-#, c-format
-msgid "Remote command execution failed: %s\n"
-msgstr "L'exécution de la commande à distance %s à échoué\n"
-#, c-format
-msgid "%s - check_by_ssh: Remote command '%s' returned status %d\n"
-msgstr ""
-#, c-format
-msgid "SSH WARNING: could not open %s\n"
-msgstr "SSH AVERTISSEMENT: impossible d'ouvrir %s\n"
-#, c-format
-msgid "%s: Error parsing output\n"
-msgstr "%s: Erreur d'analyse du résultat\n"
-msgid "Timeout interval must be a positive integer"
-msgstr "Le délai d'attente doit être un entier positif"
-msgid "Port must be a positive integer"
-msgstr "Le numéro du port doit être un entier positif"
-msgid "skip-stdout argument must be an integer"
-msgstr "Le nombres de lignes à sauter (skip-stdout) doit être un entier"
-msgid "skip-stderr argument must be an integer"
-msgstr "Le nombres de lignes à sauter (skip-stderr) doit être un entier"
-#, c-format
-msgid "%s: You must provide a host name\n"
-msgstr "%s: Vous devez fournir un nom d'hôte\n"
-msgid "No remotecmd"
-msgstr "Pas de commande distante"
-#, c-format
-msgid "%s: Argument limit of %d exceeded\n"
-msgstr ""
-msgid "Can not (re)allocate 'commargv' buffer\n"
-msgstr "Impossible de réallouer le tampon 'commargv'\n"
-#, c-format
-msgid ""
-"%s: In passive mode, you must provide a service name for each command.\n"
-msgstr ""
-"%s: En mode passif, vous devez fournir un service pour chaque commande.\n"
-#, fuzzy, c-format
-msgid ""
-"%s: In passive mode, you must provide the host short name from the "
-"monitoring configs.\n"
-msgstr ""
-"%s: En mode passif, vous devez fournir le nom court du hôte mentionné dans "
-"la configuration de nagios.\n"
-#, c-format
-msgid "This plugin uses SSH to execute commands on a remote host"
-msgstr "Ce plugin utilise SSH pour exécuter des commandes sur un hôte distant"
-msgid "tell ssh to use Protocol 1 [optional]"
-msgstr "dire à ssh d'utiliser le protocole version 1 [optionnel]"
-msgid "tell ssh to use Protocol 2 [optional]"
-msgstr "dire à ssh d'utiliser le protocole 2 [optionnel]"
-msgid "Ignore all or (if specified) first n lines on STDOUT [optional]"
-msgstr ""
-msgid "Ignore all or (if specified) first n lines on STDERR [optional]"
-msgstr ""
-msgid "Exit with an warning, if there is an output on STDERR"
-msgstr ""
-msgid ""
-"tells ssh to fork rather than create a tty [optional]. This will always "
-"return OK if ssh is executed"
-msgstr ""
-msgid "command to execute on the remote machine"
-msgstr "commande à exécuter sur la machine distante"
-msgid "SSH user name on remote host [optional]"
-msgstr "Nom d'utilisateur ssh sur la machine distante [optionnel]"
-msgid "identity of an authorized key [optional]"
-msgstr "Identité de la clé autorisée [optionnel]"
-#, fuzzy
-msgid "external command file for monitoring [optional]"
-msgstr "commande externe pour nagios [optionnel]"
-#, fuzzy
-msgid "list of monitoring service names, separated by ':' [optional]"
-msgstr "liste des services nagios, séparés par ':' [optionnel] "
-#, fuzzy
-msgid "short name of host in the monitoring configuration [optional]"
-msgstr "nom court de l'hôte dans la configuration nagios [optionnel]"
-msgid "Call ssh with '-o OPTION' (may be used multiple times) [optional]"
-msgstr ""
-"appelle ssh avec '-o OPTION' (peut être utilisé plusieurs fois) [optionnel]"
-#, fuzzy
-msgid "Tell ssh to use this configfile [optional]"
-msgstr "dire à ssh d'utiliser le protocole version 1 [optionnel]"
-msgid "Tell ssh to suppress warning and diagnostic messages [optional]"
-msgstr ""
-"dire à ssh de supprimer les messages d'erreurs et de diagnostic [optionnel]"
-msgid "Make connection problems return UNKNOWN instead of CRITICAL"
-msgstr ""
-msgid "The most common mode of use is to refer to a local identity file with"
-msgstr ""
-msgid "the '-i' option. In this mode, the identity pair should have a null"
-msgstr ""
-msgid "passphrase and the public key should be listed in the authorized_keys"
-msgstr ""
-msgid "file of the remote host. Usually the key will be restricted to running"
-msgstr ""
-msgid "only one command on the remote server. If the remote SSH server tracks"
-msgstr ""
-msgid "invocation arguments, the one remote program may be an agent that can"
-msgstr ""
-msgid "execute additional commands as proxy"
-msgstr ""
-msgid "To use passive mode, provide multiple '-C' options, and provide"
-msgstr "Pour utiliser le mode passif, utilisez plusieurs fois l'option '-C',et"
-msgid ""
-"all of -O, -s, and -n options (servicelist order must match '-C'options)"
-msgstr ""
-"et les options -O, -s, n (l'ordre des services doit correspondre aux "
-"multiples options '-C)"
-msgid "Examples:"
-msgstr "Exemples:"
-msgid "Usage:"
-msgstr "Utilisation:"
-#, fuzzy, c-format
-msgid "Host/Service Cluster Plugin for Monitoring"
-msgstr "Plugin de Cluster d'Hôte/Service pour Nagios 2"
-msgid "Options:"
-msgstr "Options:"
-msgid "Check service cluster status"
-msgstr "Vérifie l'état d'un cluster de services"
-msgid "Check host cluster status"
-msgstr "Vérifie l'état d'un cluster d'hôtes"
-msgid "Optional prepended text output (i.e. \"Host cluster\")"
-msgstr "Texte optionnel accolé à la sortie (i.e. \"Cluster d'hôtes\")"
-msgid "Specifies the range of hosts or services in cluster that must be in a"
-msgstr "Défini le nombre d'hôtes ou de services du cluster qui doivent être"
-msgid "non-OK state in order to return a WARNING status level"
-msgstr "dans un état non-OK pour retourner un état AVERTISSEMENT"
-msgid "non-OK state in order to return a CRITICAL status level"
-msgstr "dans un état non-OK pour retourner un état CRITIQUE"
-msgid "The status codes of the hosts or services in the cluster, separated by"
-msgstr "Les codes d'état des hôtes ou des services du cluster, séparés par des"
-msgid "commas"
-msgstr "virgules"
-msgid "Notes:"
-msgstr "Notes:"
-msgid ""
-"Will alert critical if there are 3 or more service data points in a non-OK"
-msgstr ""
-msgid "state."
-msgstr ""
-#, c-format
-msgid "Looking for: '%s'\n"
-msgstr "Recherche de: '%s'\n"
-msgid "dig returned an error status"
-msgstr "dig à renvoyé un état d'erreur"
-msgid "Server not found in ANSWER SECTION"
-msgstr "Le serveur n'a pas été trouvé dans l'ANSWER SECTION"
-msgid "No ANSWER SECTION found"
-msgstr "Pas d' ANSWER SECTION trouvé"
-msgid "Probably a non-existent host/domain"
-msgstr "Probablement un hôte/domaine inexistant"
-#, c-format
-msgid "Port must be a positive integer - %s"
-msgstr "Le numéro du port doit être un entier positif - %s"
-#, c-format
-msgid "Warning interval must be a positive integer - %s"
-msgstr "Le seuil d'avertissement doit être un entier positif - %s"
-#, c-format
-msgid "Critical interval must be a positive integer - %s"
-msgstr "Le seuil critique doit être un entier positif - %s"
-#, c-format
-msgid "Timeout interval must be a positive integer - %s"
-msgstr "Le délai d'attente doit être un entier positif - %s"
-#, fuzzy, c-format
-msgid "This plugin tests the DNS service on the specified host using dig"
-msgstr "Ce plugin teste le service DNS sur l'hôte spécifié en utilisant dig"
-msgid "Force dig to only use IPv4 query transport"
-msgstr ""
-msgid "Force dig to only use IPv6 query transport"
-msgstr ""
-msgid "Machine name to lookup"
-msgstr "Nom de machine à rechercher"
-msgid "Record type to lookup (default: A)"
-msgstr "Type d'enregistrement à rechercher (par défaut: A)"
-msgid ""
-"An address expected to be in the answer section. If not set, uses whatever"
-msgstr ""
-"Une adresse qui devrait se trouver dans la section réponce. Si omit, utilise"
-msgid "was in -l"
-msgstr "ce qui est passé au paramètre -l"
-msgid "Pass STRING as argument(s) to dig"
-msgstr ""
-#, c-format
-msgid "DISK %s: %s not found\n"
-msgstr "DISK %s: %s non trouvé\n"
-#, c-format
-msgid "CRITICAL"
-msgstr "CRITIQUE"
-#, c-format
-msgid "unit type %s not known\n"
-msgstr "unité de type %s inconnue\n"
-#, c-format
-msgid "failed allocating storage for '%s'\n"
-msgstr "Impossible d'allouer de l'espace pour '%s'\n"
-#, c-format
-msgid "UNKNOWN"
-msgstr "INCONNU"
-msgid "Must set a threshold value before using -p\n"
-msgstr ""
-msgid "Could not compile regular expression"
-msgstr "Impossible de compiler l'expression rationnelle"
-msgid "Must set -E before selecting paths\n"
-msgstr ""
-msgid "Must set group value before selecting paths\n"
-msgstr ""
-msgid ""
-"Paths need to be selected before using -i/-I. Use -A to select all paths "
-"explicitly"
-msgstr ""
-msgid ""
-"Must set a threshold value before using -r/-R/-A (--ereg-path/--eregi-path/--"
-"all)\n"
-msgstr ""
-msgid "Regular expression did not match any path or disk"
-msgstr ""
-msgid "Unknown argument"
-msgstr "Argument inconnu"
-#, c-format
-msgid " for %s\n"
-msgstr " pour %s\n"
-msgid ""
-"This plugin checks the amount of used disk space on a mounted file system"
-msgstr "Ce plugin vérifie la place utilisé sur un système de fichier monté"
-msgid ""
-"and generates an alert if free space is less than one of the threshold values"
-msgstr ""
-"et génère une alerte si la place disponible est plus petite qu'un des seuils "
-"fourni"
-msgid "Exit with WARNING status if less than INTEGER units of disk are free"
-msgstr ""
-"Sortir avec un résultat AVERTISSEMENT si moins de X unités de disques sont "
-"libres"
-msgid "Exit with WARNING status if less than PERCENT of disk space is free"
-msgstr ""
-"Sortir avec un résultat AVERTISSEMENT si moins de X pour-cent du disque est "
-"libre"
-msgid "Exit with CRITICAL status if less than INTEGER units of disk are free"
-msgstr ""
-"Sortir avec un résultat CRITIQUE si moins de X unités du disque sont libres"
-#, fuzzy
-msgid "Exit with CRITICAL status if less than PERCENT of disk space is free"
-msgstr ""
-"Sortir avec un résultat CRITIQUE si moins de X pour-cent du disque est libre"
-msgid "Exit with WARNING status if less than PERCENT of inode space is free"
-msgstr ""
-"Sortir avec un résultat AVERTISSEMENT si moins de X pour-cent des inodes "
-"sont libres"
-msgid "Exit with CRITICAL status if less than PERCENT of inode space is free"
-msgstr ""
-"Sortir avec un résultat CRITIQUE si moins de X pour-cent des inodes sont "
-"libres"
-msgid ""
-"Mount point or block device as emitted by the mount(8) command (may be "
-"repeated)"
-msgstr ""
-msgid "Ignore device (only works if -p unspecified)"
-msgstr "Ignorer le périphérique (marche seulement lorsque -p est utilisé)"
-msgid "Clear thresholds"
-msgstr "Effacer les seuils"
-msgid "For paths or partitions specified with -p, only check for exact paths"
-msgstr ""
-msgid "Display only devices/mountpoints with errors"
-msgstr "Afficher seulement les périphériques/point de montage avec des erreurs"
-msgid "Don't account root-reserved blocks into freespace in perfdata"
-msgstr ""
-msgid "Display inode usage in perfdata"
-msgstr ""
-msgid ""
-"Group paths. Thresholds apply to (free-)space of all partitions together"
-msgstr ""
-msgid "Same as '--units kB'"
-msgstr "Pareil à '--units kB'"
-msgid "Only check local filesystems"
-msgstr "Vérifier seulement les systèmes de fichiers locaux"
-msgid ""
-"Only check local filesystems against thresholds. Yet call stat on remote "
-"filesystems"
-msgstr ""
-msgid "to test if they are accessible (e.g. to detect Stale NFS Handles)"
-msgstr ""
-#, fuzzy
-msgid "Display the (block) device instead of the mount point"
-msgstr "Afficher le point de montage au lieu de la partition"
-msgid "Same as '--units MB'"
-msgstr "Pareil à '--units MB'"
-msgid "Explicitly select all paths. This is equivalent to -R '.*'"
-msgstr ""
-msgid ""
-"Case insensitive regular expression for path/partition (may be repeated)"
-msgstr ""
-"Expression rationnelle indépendante de la case pour un répertoire ou une "
-"partition (peut être utilisé plusieurs fois)"
-msgid "Regular expression for path or partition (may be repeated)"
-msgstr ""
-"Expression rationnelle pour un répertoire ou une partition (peut être "
-"utilisé plusieurs fois)"
-msgid ""
-"Regular expression to ignore selected path/partition (case insensitive) (may "
-"be repeated)"
-msgstr ""
-"Expression rationnelle pour ignorer un répertoire ou une partition (peut "
-"être utilisé plusieurs fois)"
-msgid ""
-"Regular expression to ignore selected path or partition (may be repeated)"
-msgstr ""
-"Expression rationnelle pour ignorer un répertoire ou une partition (peut "
-"être utilisé plusieurs fois)"
-msgid ""
-"Return OK if no filesystem matches, filesystem does not exist or is "
-"inaccessible."
-msgstr ""
-msgid "(Provide this option before -p / -r / --ereg-path if used)"
-msgstr ""
-msgid "Choose bytes, kB, MB, GB, TB (default: MB)"
-msgstr "Choisissez octets, kb, MB, GB, TB (par défaut: MB)"
-#, fuzzy
-msgid ""
-"Ignore all filesystems of types matching given regex(7) (may be repeated)"
-msgstr ""
-"Ignorer tout les systèmes de fichiers qui correspondent au type indiqué "
-"(peut être utilisé plusieurs fois)"
-#, fuzzy
-msgid ""
-"Check only filesystems where the type matches this given regex(7) (may be "
-"repeated)"
-msgstr ""
-"Ignorer tout les systèmes de fichiers qui correspondent au type indiqué "
-"(peut être utilisé plusieurs fois)"
-msgid "General usage hints:"
-msgstr ""
-msgid ""
-"- Arguments are positional! \"-w 5 -c 1 -p /foo -w6 -c2 -p /bar\" is not the "
-"same as"
-msgstr ""
-msgid "\"-w 5 -c 1 -p /bar w6 -c2 -p /foo\"."
-msgstr ""
-msgid ""
-"- The syntax is broadly: \"{thresholds a} {paths a} -C {thresholds b} "
-"{thresholds b} ...\""
-msgstr ""
-msgid "Checks /tmp and /var at 10% and 5%, and / at 100MB and 50MB"
-msgstr "Vérifie /tmp à 10% et /var à 5% et / à 100MB et 50MB"
-msgid ""
-"Checks all filesystems not matching -r at 100M and 50M. The fs matching the -"
-"r regex"
-msgstr ""
-msgid ""
-"are grouped which means the freespace thresholds are applied to all disks "
-"together"
-msgstr ""
-msgid ""
-"Checks /foo for 1000M/500M and /bar for 5/3%. All remaining volumes use "
-"100M/50M"
-msgstr ""
-#, c-format
-msgid "%s %s: %s\n"
-msgstr ""
-msgid "is not accessible"
-msgstr ""
-msgid "nslookup returned an error status"
-msgstr "nslookup à retourné un code d'erreur"
-msgid "Warning plugin error"
-msgstr "Alerte erreur de plugin"
-#, fuzzy, c-format
-msgid "DNS CRITICAL - '%s' returned empty server string\n"
-msgstr "DNS CRITIQUE - '%s' à retourné un nom d'hôte vide\n"
-#, fuzzy, c-format
-msgid "DNS CRITICAL - No response from DNS %s\n"
-msgstr "Pas de réponse du DNS %s\n"
-#, c-format
-msgid "DNS CRITICAL - '%s' returned empty host name string\n"
-msgstr "DNS CRITIQUE - '%s' à retourné un nom d'hôte vide\n"
-msgid "Non-authoritative answer:"
-msgstr "Réponse non autoritative:"
-#, fuzzy, c-format
-msgid "Domain '%s' was not found by the server\n"
-msgstr "Le domaine %s n'a pas été trouvé par le serveur\n"
-#, c-format
-msgid "DNS CRITICAL - '%s' msg parsing exited with no address\n"
-msgstr "DNS CRITIQUE - '%s' n'a pas retourné d'adresse\n"
-#, c-format
-msgid "expected '%s' but got '%s'"
-msgstr "j'attendais '%s' mais j'ai reçu '%s'"
-#, fuzzy, c-format
-msgid "Domain '%s' was found by the server: '%s'\n"
-msgstr "Le domaine %s n'a pas été trouvé par le serveur\n"
-#, c-format
-msgid "server %s is not authoritative for %s"
-msgstr "serveur %s n'est pas autoritaire pour %s"
-#, c-format
-msgid "OK"
-msgstr "OK"
-#, c-format
-msgid "WARNING"
-msgstr "AVERTISSEMENT"
-#, c-format
-msgid "%.3f second response time"
-msgid_plural "%.3f seconds response time"
-msgstr[0] "%.3f secondes de temps de réponse "
-msgstr[1] "%.3f secondes de temps de réponse "
-#, c-format
-msgid ". %s returns %s"
-msgstr ". %s renvoie %s"
-#, c-format
-msgid "DNS WARNING - %s\n"
-msgstr "DNS AVERTISSEMENT - %s\n"
-msgid " Probably a non-existent host/domain"
-msgstr " Probablement un hôte/domaine inexistant"
-#, c-format
-msgid "DNS CRITICAL - %s\n"
-msgstr "DNS CRITIQUE - %s\n"
-#, c-format
-msgid "DNS UNKNOWN - %s\n"
-msgstr "DNS INCONNU - %s\n"
-msgid "Note: nslookup is deprecated and may be removed from future releases."
-msgstr ""
-"Note: nslookup est obsolète et pourra être retiré dans les prochaines "
-"versions."
-msgid "Consider using the `dig' or `host' programs instead.  Run nslookup with"
-msgstr ""
-"Veuillez utiliser le programme 'dig' ou 'host' à la place. Faire fonctionner "
-"nslookup avec"
-msgid "the `-sil[ent]' option to prevent this message from appearing."
-msgstr "L'option '-sil[ent]' empêche l'apparition de ce message."
-#, c-format
-msgid "No response from DNS %s\n"
-msgstr "Pas de réponse du DNS %s\n"
-#, c-format
-msgid "DNS %s has no records\n"
-msgstr "Le DNS %s n'a pas d'enregistrements\n"
-#, c-format
-msgid "Connection to DNS %s was refused\n"
-msgstr "La connexion au DNS %s à été refusée\n"
-#, c-format
-msgid "Query was refused by DNS server at %s\n"
-msgstr "La requête à été refusée par le serveur DNS %s\n"
-#, c-format
-msgid "No information returned by DNS server at %s\n"
-msgstr "Pas d'information renvoyée par le serveur DNS %s\n"
-msgid "Network is unreachable\n"
-msgstr "Le réseau est inaccessible\n"
-#, c-format
-msgid "DNS failure for %s\n"
-msgstr "DNS à échoué pour %s\n"
-msgid "Input buffer overflow\n"
-msgstr "Le tampon d'entrée a débordé\n"
-msgid ""
-"This plugin uses the nslookup program to obtain the IP address for the given "
-"host/domain query."
-msgstr ""
-"Ce plugin utilise le programme nslookup pour obtenir l'adresse IP de l'hôte/"
-"domaine à interroger."
-msgid "An optional DNS server to use may be specified."
-msgstr "Un serveur DNS à utiliser peut être indiqué."
-msgid ""
-"If no DNS server is specified, the default server(s) specified in /etc/"
-"resolv.conf will be used."
-msgstr ""
-"Si aucun serveur DNS n'est spécifié, les serveurs spécifiés dans /etc/resolv."
-"conf seront utilisé."
-msgid "The name or address you want to query"
-msgstr "Le nom ou l'adresse que vous voulez interroger"
-msgid "Optional DNS server you want to use for the lookup"
-msgstr "Serveur DNS que vous voulez utiliser pour la recherche"
-#, fuzzy
-msgid ""
-"Optional IP-ADDRESS/CIDR you expect the DNS server to return. HOST must end"
-msgstr ""
-"Adresse IP que le serveur DNS doit retourner. Les hôtes doivent se terminer "
-#, fuzzy
-msgid ""
-"with a dot (.). This option can be repeated multiple times (Returns OK if any"
-msgstr "avec un point (.). Cette option peut être répétée (Retourne OK si une"
-msgid "value matches)."
-msgstr ""
-msgid ""
-"Expect the DNS server to return NXDOMAIN (i.e. the domain was not found)"
-msgstr ""
-msgid "Cannot be used together with -a"
-msgstr ""
-msgid "Optionally expect the DNS server to be authoritative for the lookup"
-msgstr "Serveur DNS qui doit normalement être autoritaire pour la recherche"
-msgid "Return warning if elapsed time exceeds value. Default off"
-msgstr ""
-"Renvoie une alerte si le temps écoulé dépasse la valeur indiquée. Désactivé "
-"par défaut"
-msgid "Return critical if elapsed time exceeds value. Default off"
-msgstr ""
-"Renvoie critique si le temps utilisé dépasse la valeur indiquée. Désactivé "
-"par défaut"
-msgid ""
-"Return critical if the list of expected addresses does not match all "
-"addresses"
-msgstr ""
-msgid "returned. Default off"
-msgstr ""
-msgid "Arguments to check_dummy must be an integer"
-msgstr "Les arguments pour check_dummy doivent être des entiers"
-#, c-format
-msgid "Status %d is not a supported error state\n"
-msgstr "Le résultat %d n'est pas un résultat supporté\n"
-msgid ""
-"This plugin will simply return the state corresponding to the numeric value"
-msgstr ""
-"Ce plugin renverra simplement l'état correspondant à la valeur numérique"
-msgid "of the <state> argument with optional text"
-msgstr "du paramètre <state> avec un texte optionnel"
-#, c-format
-msgid "Could not open pipe: %s\n"
-msgstr "Impossible d'ouvrir le pipe: %s\n"
-#, c-format
-msgid "Could not open stderr for %s\n"
-msgstr "Impossible d'ouvrir la sortie d'erreur standard pour %s\n"
-#, fuzzy
-msgid "FPING UNKNOWN - IP address not found\n"
-msgstr "PING INCONNU - Hôte non trouvé (%s)\n"
-msgid "FPING UNKNOWN - invalid commandline argument\n"
-msgstr ""
-#, fuzzy
-msgid "FPING UNKNOWN - failed system call\n"
-msgstr "PING INCONNU - Hôte non trouvé (%s)\n"
-#, fuzzy, c-format
-msgid "FPING %s - %s (rta=%f ms)|%s\n"
-msgstr "FPING %s - %s (perte=%.0f%% )|%s\n"
-#, c-format
-msgid "FPING UNKNOWN - %s not found\n"
-msgstr "PING INCONNU - Hôte non trouvé (%s)\n"
-#, c-format
-msgid "FPING CRITICAL - %s is unreachable\n"
-msgstr "PING CRITIQUE - Hôte inaccessible (%s)\n"
-#, fuzzy, c-format
-msgid "FPING UNKNOWN - %s parameter error\n"
-msgstr "PING INCONNU - Hôte non trouvé (%s)\n"
-#, c-format
-msgid "FPING CRITICAL - %s is down\n"
-msgstr "FPING CRITIQUE - %s est en panne\n"
-#, c-format
-msgid "FPING %s - %s (loss=%.0f%%, rta=%f ms)|%s %s\n"
-msgstr "FPING %s - %s (perte=%.0f%%, rta=%f ms)|%s %s\n"
-#, c-format
-msgid "FPING %s - %s (loss=%.0f%% )|%s\n"
-msgstr "FPING %s - %s (perte=%.0f%% )|%s\n"
-msgid "Invalid hostname/address"
-msgstr "Adresse/Nom d'hôte invalide"
-msgid "IPv6 support not available\n"
-msgstr "Support IPv6 non disponible\n"
-msgid "Packet size must be a positive integer"
-msgstr "La taille du paquet doit être un entier positif"
-msgid "Packet count must be a positive integer"
-msgstr "Le nombre de paquets doit être un entier positif"
-msgid "Target timeout must be a positive integer"
-msgstr "Le seuil d'avertissement doit être un entier positif"
-msgid "Interval must be a positive integer"
-msgstr "Le délai d'attente doit être un entier positif"
-msgid "Hostname was not supplied"
-msgstr "Le nom de l'hôte n'a pas été spécifié"
-#, c-format
-msgid "%s: Only one threshold may be packet loss (%s)\n"
-msgstr ""
-"%s: Seulement un seuil peut être utilisé pour les pertes de paquets (%s)\n"
-#, c-format
-msgid "%s: Only one threshold must be packet loss (%s)\n"
-msgstr ""
-"%s: Seulement un seuil doit être utilisé pour les pertes de paquets (%s)\n"
-msgid ""
-"This plugin will use the fping command to ping the specified host for a fast "
-"check"
-msgstr ""
-"Ce plugin va utiliser la commande fping pour pinger l'hôte de manière rapide."
-msgid "Note that it is necessary to set the suid flag on fping."
-msgstr ""
-"Veuillez noter qu'il est nécessaire de mettre le bit suid sur le programme "
-"fping."
-msgid ""
-"name or IP Address of host to ping (IP Address bypasses name lookup, "
-"reducing system load)"
-msgstr ""
-"nom ou adresse IP des hôtes à pinger (l'indication d'un adresse IP évite une "
-"recherche sur le nom, ce qui réduit la charge système)"
-msgid "warning threshold pair"
-msgstr "Valeurs pour le seuil d'avertissement"
-msgid "critical threshold pair"
-msgstr "Valeurs pour le seuil critique"
-msgid "Return OK after first successful reply"
-msgstr ""
-msgid "size of ICMP packet"
-msgstr "taille du paquet ICMP"
-msgid "number of ICMP packets to send"
-msgstr "nombre de paquets ICMP à envoyer"
-msgid "Target timeout (ms)"
-msgstr ""
-msgid "Interval (ms) between sending packets"
-msgstr ""
-msgid "name or IP Address of sourceip"
-msgstr ""
-msgid "source interface name"
-msgstr ""
-#, c-format
-msgid ""
-"THRESHOLD is <rta>,<pl>%% where <rta> is the round trip average travel time "
-"(ms)"
-msgstr ""
-"Le seuil est <rta>,<pl>%% ou <rta> est le temps moyen pour l'aller retour "
-"(ms)"
-msgid ""
-"which triggers a WARNING or CRITICAL state, and <pl> is the percentage of"
-msgstr ""
-"qui déclenche résultat AVERTISSEMENT ou CRITIQUE, et <pl> est le pourcentage "
-"de"
-msgid "packet loss to trigger an alarm state."
-msgstr "paquets perdu pour déclencher une alarme."
-msgid "IPv4 is used by default. Specify -6 to use IPv6."
-msgstr ""
-#, c-format
-msgid "CRITICAL - Host type parameter incorrect!\n"
-msgstr "CRITIQUE - Argument de type hôte incorrect!\n"
-#, c-format
-msgid "CRITICAL - Host not found\n"
-msgstr "CRITIQUE - Hôte non trouvé\n"
-#, c-format
-msgid "CRITICAL - Game server down or unavailable\n"
-msgstr "CRITIQUE - Serveur de jeux en panne ou non disponible\n"
-#, c-format
-msgid "CRITICAL - Game server timeout\n"
-msgstr "CRITIQUE - Temps d'attente pour le serveur de jeux dépassé\n"
-#, c-format
-msgid "This plugin tests game server connections with the specified host."
-msgstr "Le plugin teste la connexion au serveur de jeux avec l'hôte spécifié."
-msgid "Optional port of which to connect"
-msgstr ""
-msgid "Field number in raw qstat output that contains game name"
-msgstr ""
-msgid "Field number in raw qstat output that contains map name"
-msgstr ""
-msgid "Field number in raw qstat output that contains ping time"
-msgstr ""
-msgid ""
-"This plugin uses the 'qstat' command, the popular game server status query "
-"tool."
-msgstr ""
-"Ce plugin utilise la commande 'qstat', un programme répandu pour questioner "
-"les serveurs de jeux."
-msgid ""
-"If you don't have the package installed, you will need to download it from"
-msgstr ""
-"Si vous n'avez pas le programme installé, vous devrez le télécharger depuis"
-#, fuzzy
-msgid "https://github.com/multiplay/qstat before you can use this plugin."
-msgstr ""
-"http://www.activesw.com/people/steve/qstat.html avant de pouvoir utiliser ce "
-"plugin."
-msgid "Paper Jam"
-msgstr "Bourrage Papier"
-msgid "Out of Paper"
-msgstr "Plus de Papier"
-msgid "Printer Offline"
-msgstr "Imprimante hors ligne"
-msgid "Peripheral Error"
-msgstr "Erreur du périphérique"
-msgid "Intervention Required"
-msgstr "Intervention Requise"
-msgid "Toner Low"
-msgstr "Toner Faible"
-msgid "Insufficient Memory"
-msgstr "Mémoire Insuffisante"
-msgid "A Door is Open"
-msgstr "Une porte est ouverte"
-msgid "Output Tray is Full"
-msgstr "Le bac de sortie est plein"
-msgid "Data too Slow for Engine"
-msgstr "Le données arrivent trop lentement pour l'imprimante"
-msgid "Unknown Paper Error"
-msgstr "Erreur de papier inconnue"
-#, c-format
-msgid "Printer ok - (%s)\n"
-msgstr "Imprimante ok - (%s)\n"
-#, fuzzy
-msgid "Port must be a positive short integer"
-msgstr "Le numéro du port doit être un entier positif"
-msgid "This plugin tests the STATUS of an HP printer with a JetDirect card."
-msgstr "Ce plugin teste l'état d'une imprimante HP avec une carte JetDirect."
-msgid "Net-snmp must be installed on the computer running the plugin."
-msgstr "Net-snmp doit être installé sur l'ordinateur qui exécute le plugin."
-msgid "The SNMP community name "
-msgstr "Le nom de la communauté SNMP "
-#, c-format
-msgid "(default=%s)"
-msgstr "(défaut=%s)"
-#, fuzzy
-msgid "Specify the port to check "
-msgstr "Nom de l'hôte à vérifier"
-#, fuzzy
-msgid "Disable paper check "
-msgstr "Variable a vérifier"
-msgid "file does not exist or is not readable"
-msgstr ""
-msgid "Invalid certificate expiration period"
-msgstr "Période d'expiration du certificat invalide"
-msgid ""
-"Invalid option - Valid SSL/TLS versions: 2, 3, 1, 1.1, 1.2 (with optional "
-"'+' suffix)"
-msgstr ""
-msgid "Invalid option - SSL is not available"
-msgstr "Option invalide - SSL n'est pas disponible"
-msgid "Invalid max_redirs count"
-msgstr ""
-msgid "Invalid onredirect option"
-msgstr ""
-#, c-format
-msgid "option f:%d \n"
-msgstr "option f:%d \n"
-msgid "Invalid port number"
-msgstr "Numéro de port invalide"
-#, c-format
-msgid "Could Not Compile Regular Expression: %s"
-msgstr "Impossible de compiler l'expression rationnelle: %s"
-msgid "IPv6 support not available"
-msgstr "Support IPv6 non disponible"
-msgid "You must specify a server address or host name"
-msgstr "Vous devez spécifier une adresse ou un nom d'hôte"
-msgid ""
-"If you use a client certificate you must also specify a private key file"
-msgstr ""
-msgid "HTTP UNKNOWN - Memory allocation error\n"
-msgstr "HTTP INCONNU - Impossible d'allouer la mémoire\n"
-#, c-format
-msgid "%sServer date unknown, "
-msgstr "%sDate du serveur inconnue, "
-#, c-format
-msgid "%sDocument modification date unknown, "
-msgstr "%sDate de modification du document inconnue, "
-#, c-format
-msgid "%sServer date \"%100s\" unparsable, "
-msgstr "%sDate du serveur \"%100s\" illisible, "
-#, c-format
-msgid "%sDocument date \"%100s\" unparsable, "
-msgstr "%sDate du document \"%100s\" illisible, "
-#, c-format
-msgid "%sDocument is %d seconds in the future, "
-msgstr "%sLa date du document est %d secondes dans le futur, "
-#, c-format
-msgid "%sLast modified %.1f days ago, "
-msgstr "%sDernière modification %.1f jours auparavant, "
-#, c-format
-msgid "%sLast modified %d:%02d:%02d ago, "
-msgstr "%sDernière modification %d:%02d:%02d auparavant, "
-msgid "HTTP CRITICAL - Unable to open TCP socket\n"
-msgstr "HTTP CRITIQUE - Impossible d'ouvrir un socket TCP\n"
-#, fuzzy
-msgid "HTTP UNKNOWN - Could not allocate memory for full_page\n"
-msgstr "HTTP INCONNU - Impossible d'allouer une adresse\n"
-msgid "HTTP CRITICAL - Error on receive\n"
-msgstr "HTTP CRITIQUE - Erreur dans la réception\n"
-msgid "HTTP CRITICAL - No data received from host\n"
-msgstr "HTTP CRITIQUE - Pas de données reçues de l'hôte\n"
-#, c-format
-msgid "Invalid HTTP response received from host: %s\n"
-msgstr "Réponse HTTP reçue de l'hôte invalide: %s\n"
-#, c-format
-msgid "Invalid HTTP response received from host on port %d: %s\n"
-msgstr "Réponse HTTP reçue de l'hôte sur le port %d invalide: %s\n"
-#, c-format
-msgid ""
-"%s\n"
-"%s"
-msgstr ""
-#, c-format
-msgid "Status line output matched \"%s\" - "
-msgstr "La ligne d'état correspond à \"%s\" - "
-#, c-format
-msgid "HTTP CRITICAL: Invalid Status Line (%s)\n"
-msgstr "HTTP CRITIQUE: Ligne d'état non valide (%s)\n"
-#, c-format
-msgid "HTTP CRITICAL: Invalid Status (%s)\n"
-msgstr "HTTP CRITIQUE: Etat Invalide (%s)\n"
-#, c-format
-msgid "%s - "
-msgstr ""
-#, fuzzy, c-format
-msgid "%sheader '%s' not found on '%s://%s:%d%s', "
-msgstr "%schaîne non trouvée, "
-#, fuzzy, c-format
-msgid "%sstring '%s' not found on '%s://%s:%d%s', "
-msgstr "%schaîne non trouvée, "
-#, c-format
-msgid "%spattern not found, "
-msgstr "%sexpression non trouvée, "
-#, c-format
-msgid "%spattern found, "
-msgstr "%sexpression trouvée, "
-#, c-format
-msgid "%sExecute Error: %s, "
-msgstr "%sErreur d'exécution: %s, "
-#, c-format
-msgid "%spage size %d too large, "
-msgstr "%sla taille de la page est trop grande (%d), "
-#, c-format
-msgid "%spage size %d too small, "
-msgstr "%sla taille de la page est trop petite (%d), "
-#, fuzzy, c-format
-msgid "%s - %d bytes in %.3f second response time %s|%s %s %s %s %s %s %s"
-msgstr "%s - %d octets en %.3f secondes de temps de réponse %s|%s %s"
-#, c-format
-msgid "%s - %d bytes in %.3f second response time %s|%s %s"
-msgstr "%s - %d octets en %.3f secondes de temps de réponse %s|%s %s"
-msgid "HTTP UNKNOWN - Could not allocate addr\n"
-msgstr "HTTP INCONNU - Impossible d'allouer une adresse\n"
-msgid "HTTP UNKNOWN - Could not allocate URL\n"
-msgstr "HTTP INCONNU - Impossible d'allouer l'URL\n"
-#, c-format
-msgid "HTTP UNKNOWN - Could not find redirect location - %s%s\n"
-msgstr ""
-"HTTP INCONNU - Impossible de trouver l'endroit de la redirection - %s%s\n"
-#, c-format
-msgid "HTTP UNKNOWN - Empty redirect location%s\n"
-msgstr "HTTP INCONNU - endroit de redirection vide%s\n"
-#, c-format
-msgid "HTTP UNKNOWN - Could not parse redirect location - %s%s\n"
-msgstr ""
-"HTTP INCONNU - Impossible de définir l'endroit de la redirection - %s%s\n"
-#, c-format
-msgid "HTTP WARNING - maximum redirection depth %d exceeded - %s://%s:%d%s%s\n"
-msgstr ""
-"HTTP AVERTISSEMENT - le niveau maximum de redirection %d à été dépassé - "
-"%s://%s:%d%s%s\n"
-#, fuzzy, c-format
-msgid "HTTP CRITICAL - redirection creates an infinite loop - %s://%s:%d%s%s\n"
-msgstr ""
-"HTTP AVERTISSEMENT - la redirection crée une boucle infinie - %s://%s:"
-"%d%s%s\n"
-#, c-format
-msgid "HTTP UNKNOWN - Redirection to port above %d - %s://%s:%d%s%s\n"
-msgstr "HTTP INCONNU - Redirection à un port supérieur à %d - %s://%s:%d%s%s\n"
-#, c-format
-msgid "Redirection to %s://%s:%d%s\n"
-msgstr "Redirection vers %s://%s:%d%s\n"
-msgid "This plugin tests the HTTP service on the specified host. It can test"
-msgstr ""
-"Ce plugin teste le service HTTP sur l'hôte spécifié. Il peut tester les"
-msgid "normal (http) and secure (https) servers, follow redirects, search for"
-msgstr ""
-"serveurs normaux (http) et sécurisés (https), suivre les redirections, "
-"rechercher des"
-msgid "strings and regular expressions, check connection times, and report on"
-msgstr ""
-"chaînes de caractères et expressions rationnelles, vérifier le temps de "
-"réponse"
-msgid "certificate expiration times."
-msgstr "et rapporter la date d'expiration du certificat."
-#, c-format
-msgid "In the first form, make an HTTP request."
-msgstr ""
-#, c-format
-msgid ""
-"In the second form, connect to the server and check the TLS certificate."
-msgstr ""
-#, c-format
-msgid "NOTE: One or both of -H and -I must be specified"
-msgstr "NOTE: les paramètres -H et -I peuvent être spécifiés"
-msgid "Host name argument for servers using host headers (virtual host)"
-msgstr ""
-msgid "Append a port to include it in the header (eg: example.com:5000)"
-msgstr ""
-msgid ""
-"IP address or name (use numeric address if possible to bypass DNS lookup)."
-msgstr ""
-msgid "Port number (default: "
-msgstr "Numéro du port (défaut: "
-msgid ""
-"Connect via SSL. Port defaults to 443. VERSION is optional, and prevents"
-msgstr ""
-msgid "auto-negotiation (2 = SSLv2, 3 = SSLv3, 1 = TLSv1, 1.1 = TLSv1.1,"
-msgstr ""
-msgid "1.2 = TLSv1.2). With a '+' suffix, newer versions are also accepted."
-msgstr ""
-msgid "Enable SSL/TLS hostname extension support (SNI)"
-msgstr ""
-msgid ""
-"Minimum number of days a certificate has to be valid. Port defaults to 443"
-msgstr ""
-"Nombre de jours minimum pour que le certificat soit valide. Port par défaut "
-"443"
-msgid ""
-"(when this option is used the URL is not checked by default. You can use"
-msgstr ""
-msgid " --continue-after-certificate to override this behavior)"
-msgstr ""
-msgid ""
-"Allows the HTTP check to continue after performing the certificate check."
-msgstr ""
-msgid "Does nothing unless -C is used."
-msgstr ""
-msgid "Name of file that contains the client certificate (PEM format)"
-msgstr ""
-msgid "to be used in establishing the SSL session"
-msgstr ""
-msgid "Name of file containing the private key (PEM format)"
-msgstr ""
-msgid "matching the client certificate"
-msgstr ""
-msgid "Comma-delimited list of strings, at least one of them is expected in"
-msgstr ""
-"Liste the chaines de charactères séparées par des virgules, au moins une "
-"d'elles"
-msgid "the first (status) line of the server response (default: "
-msgstr "est attendue dans la première ligne de réponse du serveur (défaut: "
-msgid ""
-"If specified skips all other status line logic (ex: 3xx, 4xx, 5xx processing)"
-msgstr ""
-"Si spécifié, surpasse toute autre logique de status (ex: 3xx, 4xx, 5xx)"
-#, fuzzy
-msgid "String to expect in the response headers"
-msgstr "Chaîne de caractères à attendre en réponse"
-msgid "String to expect in the content"
-msgstr "Chaîne de caractère attendue dans le contenu"
-msgid "URL to GET or POST (default: /)"
-msgstr "URL pour le GET ou le POST (défaut: /)"
-msgid "URL encoded http POST data"
-msgstr ""
-msgid "Set HTTP method."
-msgstr ""
-msgid "Don't wait for document body: stop reading after headers."
-msgstr ""
-"Ne pas attendre pour le corps du document: arrêter de lire après les entêtes"
-msgid "(Note that this still does an HTTP GET or POST, not a HEAD.)"
-msgstr "(Veuillez noter qu'un HTTP GET ou POST est effectué, pas un HEAD.)"
-msgid "Warn if document is more than SECONDS old. the number can also be of"
-msgstr ""
-msgid "the form \"10m\" for minutes, \"10h\" for hours, or \"10d\" for days."
-msgstr ""
-msgid "specify Content-Type header media type when POSTing\n"
-msgstr ""
-msgid "Allow regex to span newlines (must precede -r or -R)"
-msgstr ""
-msgid "Search page for regex STRING"
-msgstr ""
-msgid "Search page for case-insensitive regex STRING"
-msgstr ""
-msgid "Return CRITICAL if found, OK if not\n"
-msgstr ""
-msgid "Username:password on sites with basic authentication"
-msgstr ""
-msgid "Username:password on proxy-servers with basic authentication"
-msgstr ""
-msgid "String to be sent in http header as \"User Agent\""
-msgstr ""
-msgid ""
-"Any other tags to be sent in http header. Use multiple times for additional "
-"headers"
-msgstr ""
-msgid "Print additional performance data"
-msgstr ""
-msgid "Print body content below status line"
-msgstr ""
-msgid "Wrap output in HTML link (obsoleted by urlize)"
-msgstr ""
-msgid "How to handle redirected pages. sticky is like follow but stick to the"
-msgstr ""
-msgid "specified IP address. stickyport also ensures port stays the same."
-msgstr ""
-#, fuzzy
-msgid "Maximal number of redirects (default: "
-msgstr "PROCS   - nombre de  processus (défaut)"
-msgid "Minimum page size required (bytes) : Maximum page size required (bytes)"
-msgstr ""
-msgid "This plugin will attempt to open an HTTP connection with the host."
-msgstr "Ce plugin va essayer d'ouvrir un connexion SMTP avec l'hôte."
-msgid ""
-"Successful connects return STATE_OK, refusals and timeouts return "
-"STATE_CRITICAL"
-msgstr ""
-msgid ""
-"other errors return STATE_UNKNOWN.  Successful connects, but incorrect "
-"response"
-msgstr ""
-msgid ""
-"messages from the host result in STATE_WARNING return values.  If you are"
-msgstr ""
-msgid ""
-"checking a virtual server that uses 'host headers' you must supply the FQDN"
-msgstr ""
-msgid "(fully qualified domain name) as the [host_name] argument."
-msgstr ""
-msgid "This plugin can also check whether an SSL enabled web server is able to"
-msgstr ""
-msgid "serve content (optionally within a specified time) or whether the X509 "
-msgstr ""
-msgid "certificate is still valid for the specified number of days."
-msgstr ""
-#, fuzzy
-msgid "Please note that this plugin does not check if the presented server"
-msgstr "Ce plugin vérifie le service ntp sur l'hôte"
-msgid "certificate matches the hostname of the server, or if the certificate"
-msgstr ""
-msgid "has a valid chain of trust to one of the locally installed CAs."
-msgstr ""
-msgid ""
-"When the 'www.verisign.com' server returns its content within 5 seconds,"
-msgstr ""
-msgid ""
-"a STATE_OK will be returned. When the server returns its content but exceeds"
-msgstr ""
-msgid ""
-"the 5-second threshold, a STATE_WARNING will be returned. When an error "
-"occurs,"
-msgstr ""
-msgid "a STATE_CRITICAL will be returned."
-msgstr ""
-msgid ""
-"When the certificate of 'www.verisign.com' is valid for more than 14 days,"
-msgstr ""
-msgid ""
-"a STATE_OK is returned. When the certificate is still valid, but for less "
-"than"
-msgstr ""
-msgid ""
-"14 days, a STATE_WARNING is returned. A STATE_CRITICAL will be returned when"
-msgstr ""
-msgid "the certificate is expired."
-msgstr "le certificat est expiré."
-msgid ""
-"When the certificate of 'www.verisign.com' is valid for more than 30 days,"
-msgstr ""
-msgid "30 days, but more than 14 days, a STATE_WARNING is returned."
-msgstr ""
-msgid ""
-"A STATE_CRITICAL will be returned when certificate expires in less than 14 "
-"days"
-msgstr ""
-msgid ""
-"check_http -I 192.168.100.35 -p 80 -u https://www.verisign.com/ -S -j "
-"CONNECT -H www.verisign.com "
-msgstr ""
-msgid ""
-"all these options are needed: -I <proxy> -p <proxy-port> -u <check-url> -"
-"S(sl) -j CONNECT -H <webserver>"
-msgstr ""
-msgid ""
-"a STATE_CRITICAL will be returned. By adding a colon to the method you can "
-"set the method used"
-msgstr ""
-msgid "inside the proxied connection: -j CONNECT:POST"
-msgstr ""
-#, c-format
-msgid "Could not connect to the server at port %i\n"
-msgstr "Impossible de se connecter au serveur port %i\n"
-#, c-format
-msgid "Could not set protocol version %d\n"
-msgstr "Impossible d'utiliser le protocole version %d\n"
-#, c-format
-msgid "Could not init TLS at port %i!\n"
-msgstr "Impossible d'initialiser TLS sur le port %i!\n"
-#, c-format
-msgid "TLS not supported by the libraries!\n"
-msgstr "TLS n'est pas supporté!\n"
-#, c-format
-msgid "Could not init startTLS at port %i!\n"
-msgstr "Impossible d'initialiser startTLS sur le port %i!\n"
-#, c-format
-msgid "startTLS not supported by the library, needs LDAPv3!\n"
-msgstr ""
-"startTLS n'est pas supporté par la librairie LDAP, j'ai besoin de LDAPv3!\n"
-#, c-format
-msgid "Could not bind to the LDAP server\n"
-msgstr "Impossible de se connecter au serveur LDAP\n"
-#, c-format
-msgid "Could not search/find objectclasses in %s\n"
-msgstr "Impossible de chercher/trouver les objectclasses dans %s\n"
-#, fuzzy, c-format
-msgid "LDAP %s - found %d entries in %.3f seconds|%s %s\n"
-msgstr "%s - %d octets en %.3f secondes de temps de réponse %s|%s %s"
-#, c-format
-msgid "LDAP %s - %.3f seconds response time|%s\n"
-msgstr "LDAP %s - %.3f secondes de temps de réponse|%s\n"
-#, c-format
-msgid "%s cannot be combined with %s"
-msgstr ""
-msgid "Please specify the host name\n"
-msgstr "Veuillez spécifier le nom de l'hôte\n"
-msgid "Please specify the LDAP base\n"
-msgstr "Veuillez spécifier la base LDAP\n"
-msgid "ldap attribute to search (default: \"(objectclass=*)\""
-msgstr ""
-msgid "ldap base (eg. ou=my unit, o=my org, c=at"
-msgstr ""
-msgid "ldap bind DN (if required)"
-msgstr ""
-msgid ""
-"ldap password (if required, or set the password through environment variable "
-"'LDAP_PASSWORD')"
-msgstr ""
-msgid "use starttls mechanism introduced in protocol version 3"
-msgstr "utiliser le fonctionnement starttls du protocole version 3"
-msgid "use ldaps (ldap v2 ssl method). this also sets the default port to"
-msgstr ""
-msgid "use ldap protocol version 2"
-msgstr "utiliser le protocole ldap version 2"
-msgid "use ldap protocol version 3"
-msgstr "utiliser le protocole ldap version 3"
-msgid "default protocol version:"
-msgstr "version du protocole par défaut:"
-#, fuzzy
-msgid "Number of found entries to result in warning status"
-msgstr "Décalage résultant en un avertissement (secondes)"
-#, fuzzy
-msgid "Number of found entries to result in critical status"
-msgstr "Décalage résultant en un état critique (secondes)"
-msgid "If this plugin is called via 'check_ldaps', method 'STARTTLS' will be"
-msgstr ""
-#, c-format
-msgid ""
-" implied (using default port %i) unless --port=636 is specified. In that "
-"case\n"
-msgstr ""
-msgid "'SSL on connect' will be used no matter how the plugin was called."
-msgstr ""
-msgid ""
-"This detection is deprecated, please use 'check_ldap' with the '--starttls' "
-"or '--ssl' flags"
-msgstr ""
-msgid "to define the behaviour explicitly instead."
-msgstr ""
-msgid "The parameters --warn-entries and --crit-entries are optional."
-msgstr ""
-msgid "Warning threshold must be float or float triplet!\n"
-msgstr "Le seuil d'alerte doit être un nombre à virgule flottante!\n"
-#, c-format
-msgid "Error opening %s\n"
-msgstr "Erreur à l'ouverture de %s\n"
-#, fuzzy, c-format
-msgid "could not parse load from uptime %s: %d\n"
-msgstr "Lecture des arguments impossible\n"
-#, c-format
-msgid "Error code %d returned in %s\n"
-msgstr "Le code erreur %d à été retourné par %s\n"
-#, c-format
-msgid "Error in getloadavg()\n"
-msgstr "Erreur dans la fonction getloadavg()\n"
-#, c-format
-msgid "Error processing %s\n"
-msgstr "Erreur lors de l'utilisation de %s\n"
-#, c-format
-msgid "load average: %.2f, %.2f, %.2f"
-msgstr "Charge moyenne: %.2f, %.2f, %.2f"
-#, c-format
-msgid "Critical threshold for %d-minute load average is not specified\n"
-msgstr ""
-"Le seuil critique pour la charge système après %d minutes n'est pas "
-"spécifié\n"
-#, c-format
-msgid "Warning threshold for %d-minute load average is not specified\n"
-msgstr ""
-"Le seuil d'avertissement pour la charge système après %d minutes n'est pas "
-"spécifié\n"
-#, c-format
-msgid ""
-"Parameter inconsistency: %d-minute \"warning load\" is greater than "
-"\"critical load\"\n"
-msgstr ""
-"Arguments Incorrects: %d-minute \"alerte charge système\" est plus grand que "
-"\"alerte critique charge système\"\n"
-#, c-format
-msgid "This plugin tests the current system load average."
-msgstr "Ce plugin teste la charge système actuelle."
-msgid "Exit with WARNING status if load average exceeds WLOADn"
-msgstr ""
-"Sortir avec un résultat AVERTISSEMENT si la charge moyenne dépasse WLOAD"
-msgid "Exit with CRITICAL status if load average exceed CLOADn"
-msgstr "Sortir avec un résultat CRITIQUE si la charge moyenne excède CLOAD"
-msgid "the load average format is the same used by \"uptime\" and \"w\""
-msgstr ""
-msgid "Divide the load averages by the number of CPUs (when possible)"
-msgstr ""
-msgid "Number of processes to show when printing the top consuming processes."
-msgstr ""
-msgid "NUMBER_OF_PROCS=0 disables this feature. Default value is 0"
-msgstr ""
-#, c-format
-msgid "'%s' exited with non-zero status.\n"
-msgstr ""
-#, c-format
-msgid "some error occurred getting procs list.\n"
-msgstr ""
-msgid "Could not parse arguments\n"
-msgstr "Lecture des arguments impossible\n"
-#, c-format
-msgid "Unable to open MRTG log file\n"
-msgstr "Impossible d'ouvrir le fichier de log de MRTG\n"
-#, c-format
-msgid "Unable to process MRTG log file\n"
-msgstr "Impossible de traiter le fichier de log de MRTG\n"
-#, c-format
-msgid "MRTG data has expired (%d minutes old)\n"
-msgstr "Les données de MRTG on expirées (vieilles de %d minutes)\n"
-msgid "Avg"
-msgstr "Moyenne"
-msgid "Max"
-msgstr "Max"
-msgid "Invalid variable number"
-msgstr "Numéro de la variable invalide"
-#, c-format
-msgid ""
-"%s is not a valid expiration time\n"
-"Use '%s -h' for additional help\n"
-msgstr ""
-"%s n'est pas un temps d'expiration valide\n"
-"Utilisez '%s -h' pour de l'aide supplémentaire\n"
-msgid "Invalid variable number\n"
-msgstr "Numéro de la variable invalide\n"
-msgid "You must supply the variable number"
-msgstr "Vous devez fournir le numéro de la variable"
-msgid ""
-"This plugin will check either the average or maximum value of one of the"
-msgstr "Ce plugin va vérifier la moyenne ou le maximum d'une "
-msgid "two variables recorded in an MRTG log file."
-msgstr "deux variables du fichier de log de MRTG."
-msgid "The MRTG log file containing the data you want to monitor"
-msgstr ""
-msgid "Minutes before MRTG data is considered to be too old"
-msgstr ""
-msgid "Should we check average or maximum values?"
-msgstr ""
-msgid "Which variable set should we inspect? (1 or 2)"
-msgstr ""
-msgid "Threshold value for data to result in WARNING status"
-msgstr ""
-msgid "Threshold value for data to result in CRITICAL status"
-msgstr ""
-msgid "Type label for data (Examples: Conns, \"Processor Load\", In, Out)"
-msgstr ""
-msgid "Option units label for data (Example: Packets/Sec, Errors/Sec,"
-msgstr ""
-#, c-format
-msgid "\"Bytes Per Second\", \"%% Utilization\")"
-msgstr ""
-msgid ""
-"If the value exceeds the <vwl> threshold, a WARNING status is returned. If"
-msgstr ""
-msgid ""
-"the value exceeds the <vcl> threshold, a CRITICAL status is returned.  If"
-msgstr ""
-msgid "the data in the log file is older than <expire_minutes> old, a WARNING"
-msgstr ""
-msgid "status is returned and a warning message is printed."
-msgstr ""
-msgid ""
-"This plugin is useful for monitoring MRTG data that does not correspond to"
-msgstr ""
-msgid ""
-"bandwidth usage.  (Use the check_mrtgtraf plugin for monitoring bandwidth)."
-msgstr ""
-msgid ""
-"It can be used to monitor any kind of data that MRTG is monitoring - errors,"
-msgstr ""
-msgid ""
-"packets/sec, etc.  I use MRTG in conjunction with the Novell NLM that allows"
-msgstr ""
-msgid ""
-"me to track processor utilization, user connections, drive space, etc and"
-msgstr ""
-msgid "this plugin works well for monitoring that kind of data as well."
-msgstr ""
-msgid ""
-"- This plugin only monitors one of the two variables stored in the MRTG log"
-msgstr ""
-"- Ce plugin vérifie seulement une ou deux variables écrites dans un fichier "
-"de log MRTG"
-msgid "file.  If you want to monitor both values you will have to define two"
-msgstr ""
-msgid "commands with different values for the <variable> argument.  Of course,"
-msgstr ""
-msgid "you can always hack the code to make this plugin work for you..."
-msgstr ""
-msgid ""
-"- MRTG stands for the Multi Router Traffic Grapher.  It can be downloaded "
-"from"
-msgstr ""
-msgid "Unable to open MRTG log file"
-msgstr "Impossible d'ouvrir le fichier de log de MRTG"
-msgid "Unable to process MRTG log file"
-msgstr "Impossible de traiter le fichier de log de MRTG"
-#, fuzzy, c-format
-msgid "%s. In = %0.1f %s/s, %s. Out = %0.1f %s/s|%s %s\n"
-msgstr "%s. Entrée = %0.1f %s, %s. Sortie = %0.1f %s|%s %s\n"
-#, c-format
-msgid "Traffic %s - %s\n"
-msgstr "Trafic %s - %s\n"
-msgid ""
-"This plugin will check the incoming/outgoing transfer rates of a router,"
-msgstr ""
-"Ce plugin va vérifier le taux de transfert en entrée/sortie d'un routeur,"
-msgid "switch, etc recorded in an MRTG log.  If the newest log entry is older"
-msgstr ""
-msgid "than <expire_minutes>, a WARNING status is returned. If either the"
-msgstr ""
-msgid "incoming or outgoing rates exceed the <icl> or <ocl> thresholds (in"
-msgstr ""
-msgid "Bytes/sec), a CRITICAL status results.  If either of the rates exceed"
-msgstr ""
-msgid "the <iwl> or <owl> thresholds (in Bytes/sec), a WARNING status results."
-msgstr ""
-msgid "File to read log from"
-msgstr ""
-msgid "Minutes after which log expires"
-msgstr ""
-msgid "Test average or maximum"
-msgstr ""
-msgid "Warning threshold pair <incoming>,<outgoing>"
-msgstr "Paire de seuils d'avertissement <entrant>,<sortant>"
-msgid "Critical threshold pair <incoming>,<outgoing>"
-msgstr "Paire de seuils critique <entrant>,<sortant>"
-msgid ""
-"- MRTG stands for Multi Router Traffic Grapher. It can be downloaded from"
-msgstr ""
-msgid "- While MRTG can monitor things other than traffic rates, this"
-msgstr ""
-msgid "  plugin probably won't work with much else without modification."
-msgstr ""
-msgid "- The calculated i/o rates are a little off from what MRTG actually"
-msgstr ""
-msgid "  reports.  I'm not sure why this is right now, but will look into it"
-msgstr ""
-msgid "  for future enhancements of this plugin."
-msgstr ""
-#, c-format
-msgid "Usage"
-msgstr "Utilisation"
-#, fuzzy, c-format
-msgid "status store_result error: %s\n"
-msgstr "erreur slave store_result: %s\n"
-#, c-format
-msgid "slave query error: %s\n"
-msgstr "erreur de requête de l'esclave: %s\n"
-#, c-format
-msgid "slave store_result error: %s\n"
-msgstr "erreur slave store_result: %s\n"
-msgid "No slaves defined"
-msgstr "Pas d'esclave spécifié"
-#, c-format
-msgid "slave fetch row error: %s\n"
-msgstr "erreur esclave lecture d'une ligne: %s\n"
-#, c-format
-msgid "Slave running: %s"
-msgstr "L'esclave fonctionne: %s"
-msgid "This program tests connections to a MySQL server"
-msgstr "Ce plugin teste une connexion vers un serveur MySQL"
-msgid "Ignore authentication failure and check for mysql connectivity only"
-msgstr ""
-msgid "Use the specified socket (has no effect if -H is used)"
-msgstr ""
-msgid "Check database with indicated name"
-msgstr ""
-msgid "Read from the specified client options file"
-msgstr ""
-msgid "Use a client options group"
-msgstr ""
-msgid "Connect using the indicated username"
-msgstr ""
-msgid "Use the indicated password to authenticate the connection"
-msgstr ""
-msgid "IMPORTANT: THIS FORM OF AUTHENTICATION IS NOT SECURE!!!"
-msgstr ""
-msgid "Your clear-text password could be visible as a process table entry"
-msgstr ""
-msgid "Check if the slave thread is running properly."
-msgstr ""
-msgid "Exit with WARNING status if slave server is more than INTEGER seconds"
-msgstr ""
-"Sortir avec un résultat AVERTISSEMENT si le serveur esclave est plus de X "
-msgid "behind master"
-msgstr "secondes en retard sur le maître"
-msgid "Exit with CRITICAL status if slave server is more then INTEGER seconds"
-msgstr "Sortir avec un résultat CRITIQUE si le serveur esclave est plus de X "
-msgid "Use ssl encryption"
-msgstr ""
-msgid "Path to CA signing the cert"
-msgstr ""
-msgid "Path to SSL certificate"
-msgstr ""
-msgid "Path to private SSL key"
-msgstr ""
-msgid "Path to CA directory"
-msgstr ""
-msgid "List of valid SSL ciphers"
-msgstr ""
-msgid ""
-"There are no required arguments. By default, the local database is checked"
-msgstr ""
-"Il n'y a pas d'arguments nécessaires. Par défaut la base de donnée locale "
-"est testée"
-msgid ""
-"using the default unix socket. You can force TCP on localhost by using an"
-msgstr ""
-msgid "IP address or FQDN ('localhost' will use the socket as well)."
-msgstr ""
-msgid "You must specify -p with an empty string to force an empty password,"
-msgstr ""
-msgid "overriding any my.cnf settings."
-msgstr ""
-msgid "Cannot open status log for reading!"
-msgstr "Impossible d'ouvrir le fichier status log en lecture!"
-#, c-format
-msgid "Found process: %s %s\n"
-msgstr "Processus trouvé: %s %s\n"
-msgid "Could not locate a running Nagios process!"
-msgstr "Impossible de trouver un processus Nagios actif!"
-msgid "Cannot parse Nagios log file for valid time"
-msgstr ""
-"Impossible de trouver une date/heure valide dans le fichier de log de Nagios"
-#, c-format
-msgid "%d process"
-msgid_plural "%d processes"
-msgstr[0] "%d processus"
-msgstr[1] "%d processus"
-#, c-format
-msgid "status log updated %d second ago"
-msgid_plural "status log updated %d seconds ago"
-msgstr[0] "status log mis à jour %d secondes auparavant"
-msgstr[1] "status log mis à jour %d secondes auparavant"
-msgid "Expiration time must be an integer (seconds)\n"
-msgstr "Le délai d'expiration doit être un entier (en secondes)\n"
-#, fuzzy
-msgid "Timeout must be an integer (seconds)\n"
-msgstr "Le délai d'expiration doit être un entier (en secondes)\n"
-msgid "You must provide the status_log\n"
-msgstr "Vous devez fournir le status_log\n"
-msgid "You must provide a process string\n"
-msgstr "Vous devez fournir un nom de processus\n"
-msgid ""
-"This plugin checks the status of the Nagios process on the local machine"
-msgstr "Ce plugin vérifie l'état du processus Nagios sur la machine locale."
-msgid ""
-"The plugin will check to make sure the Nagios status log is no older than"
-msgstr "Ce plugin vérifie que le status log de Nagios n'est pas plus vieux que"
-msgid "the number of minutes specified by the expires option."
-msgstr "le nombre de minutes spécifies par l'option expire."
-msgid ""
-"It also checks the process table for a process matching the command argument."
-msgstr ""
-msgid "Name of the log file to check"
-msgstr "Nom du fichier log à vérifier"
-msgid "Minutes aging after which logfile is considered stale"
-msgstr ""
-msgid "Substring to search for in process arguments"
-msgstr ""
-msgid "Timeout for the plugin in seconds"
-msgstr ""
-#, c-format
-msgid "Wrong client version - running: %s, required: %s"
-msgstr "Mauvaise version du client utilisée: %s, nécessaire: %s"
-msgid "missing -l parameters"
-msgstr "Arguments -l manquants"
-msgid "wrong -l parameter."
-msgstr "Arguments -l erronés."
-msgid "CPU Load"
-msgstr "Charge CPU"
-#, c-format
-msgid " %lu%% (%lu min average)"
-msgstr " %lu%% (%lu moyenne minimale)"
-#, c-format
-msgid " '%lu min avg Load'=%lu%%;%lu;%lu;0;100"
-msgstr " '%lu Charge moyenne minimale'=%lu%%;%lu;%lu;0;100"
-msgid "not enough values for -l parameters"
-msgstr "pas assez de valeur pour l'argument -l"
-msgid "wrong -l argument"
-msgstr "Argument -l erroné"
-#, fuzzy, c-format
-msgid "System Uptime - %u day(s) %u hour(s) %u minute(s) |uptime=%lu"
-msgstr "Système démarré - %u jour(s) %u heure(s) %u minute(s)"
-#, c-format
-msgid "%s:\\ - total: %.2f Gb - used: %.2f Gb (%.0f%%) - free %.2f Gb (%.0f%%)"
-msgstr ""
-"%s:\\ - total: %.2f Gb - utilisé: %.2f Gb (%.0f%%) - libre %.2f Gb (%.0f%%)"
-#, c-format
-msgid "'%s:\\ Used Space'=%.2fGb;%.2f;%.2f;0.00;%.2f"
-msgstr "'%s:\\ Espace Utilisé'=%.2fGb;%.2f;%.2f;0.00;%.2f"
-msgid "Free disk space : Invalid drive"
-msgstr "Espace disque libre : Lecteur invalide"
-msgid "No service/process specified"
-msgstr "Pas de service/processus spécifié"
-msgid "could not fetch information from server\n"
-msgstr "Impossible d'obtenir l'information depuis le serveur\n"
-#, fuzzy, c-format
-msgid ""
-"Memory usage: total:%.2f MB - used: %.2f MB (%.0f%%) - free: %.2f MB (%.0f%%)"
-msgstr ""
-"Mémoire utilisée: total:%.2f Mb - utilisée: %.2f Mb (%.0f%%) - libre: %.2f "
-"Mb (%.0f%%)"
-#, fuzzy, c-format
-msgid "'Memory usage'=%.2fMB;%.2f;%.2f;0.00;%.2f"
-msgstr "'Mémoire utilisée'=%.2fMb;%.2f;%.2f;0.00;%.2f"
-msgid "No counter specified"
-msgstr "Pas de compteur spécifié"
-msgid "Minimum value contains non-numbers"
-msgstr "La valeur minimum contient des caractères non numériques"
-msgid "Maximum value contains non-numbers"
-msgstr "La valeur maximum contient des caractères non numériques"
-msgid "No unit counter specified"
-msgstr "Pas de compteur spécifié"
-msgid "Please specify a variable to check"
-msgstr "Veuillez préciser une variable a vérifier"
-msgid "Server port must be an integer\n"
-msgstr "Le port du serveur doit être un nombre entier\n"
-msgid "You must provide a server address or host name"
-msgstr "Vous devez spécifier une adresse ou un nom d'hôte"
-msgid "None"
-msgstr "Aucun"
-msgid "This plugin collects data from the NSClient service running on a"
-msgstr ""
-"Ce plugin collecte les données depuis le service NSClient tournant sur un"
-msgid "Windows NT/2000/XP/2003 server."
-msgstr "Serveur Windows NT/2000/XP/2003."
-msgid "Name of the host to check"
-msgstr "Nom de l'hôte à vérifier"
-msgid "Optional port number (default: "
-msgstr "Numéro de port optionnel (défaut: "
-msgid "Password needed for the request"
-msgstr "Mot de passe nécessaire pour la requête"
-msgid "Threshold which will result in a warning status"
-msgstr ""
-msgid "Threshold which will result in a critical status"
-msgstr ""
-msgid "Seconds before connection attempt times out (default: "
-msgstr ""
-msgid "Parameters passed to specified check (see below)"
-msgstr ""
-msgid "Display options (currently only SHOWALL works)"
-msgstr ""
-msgid "Return UNKNOWN on timeouts"
-msgstr ""
-msgid "Print this help screen"
-msgstr "Afficher l'écran d'aide"
-msgid "Print version information"
-msgstr "Afficher la version"
-msgid "Variable to check"
-msgstr "Variable a vérifier"
-msgid "Valid variables are:"
-msgstr "Les variables valides sont"
-msgid "Get the NSClient version"
-msgstr "Obtenir la version de NSClient"
-msgid "If -l <version> is specified, will return warning if versions differ."
-msgstr ""
-"si l'argument -l <version> est spécifié, une alerte AVERTISSEMENT sera "
-"renvoyée, si les versions sont différentes."
-msgid "Average CPU load on last x minutes."
-msgstr "Moyenne de la charge CPU sur les dernières x minutes."
-msgid "Request a -l parameter with the following syntax:"
-msgstr "Demande un paramètre -l avec la syntaxe suivante:"
-msgid "-l <minutes range>,<warning threshold>,<critical threshold>."
-msgstr "-l <plage de minutes>,<seuil d'avertissement>,<seuil critique>."
-msgid "<minute range> should be less than 24*60."
-msgstr "<plage de minutes> devrait être inférieur à 24*60."
-msgid ""
-"Thresholds are percentage and up to 10 requests can be done in one shot."
-msgstr ""
-"Les seuils sonts en pourcentage et un maximum de 10 requêtes peuvent être "
-"effectuées à la fois."
-msgid "Get the uptime of the machine."
-msgstr "Obtenir le temps de service de la machine."
-msgid "-l <unit> "
-msgstr ""
-msgid "<unit> = seconds, minutes, hours, or days. (default: minutes)"
-msgstr ""
-#, fuzzy
-msgid "Thresholds will use the unit specified above."
-msgstr "Ce plugin va vérifier l'heure sur l'hôte spécifié."
-msgid "Size and percentage of disk use."
-msgstr "Taille et pourcentage de l'utilisation disque."
-msgid "Request a -l parameter containing the drive letter only."
-msgstr "Demande un paramètre -l contennant uniquement la lettre du lecteur."
-msgid "Warning and critical thresholds can be specified with -w and -c."
-msgstr "Les seuils d'alerte et critiques peuvent être spécifiés avec -w et -c."
-msgid "Memory use."
-msgstr "Mémoire utilisée."
-msgid "Check the state of one or several services."
-msgstr "Vérifier l'état d'un ou plusieurs services."
-msgid "Request a -l parameters with the following syntax:"
-msgstr "Demande un paramètre -l avec la syntaxe suivante:"
-msgid "-l <service1>,<service2>,<service3>,..."
-msgstr "-l <service1>,<service2>,<service3>,..."
-msgid "You can specify -d SHOWALL in case you want to see working services"
-msgstr "Vous pouvez spécifier -d SHOWALL pour voir les services fonctionnant"
-msgid "in the returned string."
-msgstr "dans la chaîne de caractère renvoyée."
-msgid "Check if one or several process are running."
-msgstr "Vérifie si un ou plusieurs processus sont démarrés."
-msgid "Same syntax as SERVICESTATE."
-msgstr "Même syntaxe que SERVICESTATE."
-msgid "Check any performance counter of Windows NT/2000."
-msgstr "Vérifier n'importe quel compteur de performance sur Windows NT/2000."
-msgid "-l \"\\\\<performance object>\\\\counter\",\"<description>"
-msgstr "-l \"\\\\<catégorie>\\\\compteur\",\"<description>"
-msgid "The <description> parameter is optional and is given to a printf "
-msgstr "Le paramètre <description> est optionnel et est passé à la fonction "
-msgid "output command which requires a float parameter."
-msgstr "de sortie printf qui demande un paramètre de type float."
-#, c-format
-msgid "If <description> does not include \"%%\", it is used as a label."
-msgstr "Si <description> n'inclus pas \"%%\", il est utilisé comme étiquette."
-msgid "Some examples:"
-msgstr "Exemples:"
-msgid "Check any performance counter object of Windows NT/2000."
-msgstr "Vérifie n'importe quel compteur de performance de Windows NT/2000."
-msgid ""
-"Syntax: check_nt -H <hostname> -p <port> -v INSTANCES -l <counter object>"
-msgstr ""
-msgid "<counter object> is a Windows Perfmon Counter object (eg. Process),"
-msgstr ""
-msgid "if it is two words, it should be enclosed in quotes"
-msgstr ""
-msgid "The returned results will be a comma-separated list of instances on "
-msgstr ""
-msgid " the selected computer for that object."
-msgstr ""
-msgid ""
-"The purpose of this is to be run from command line to determine what "
-"instances"
-msgstr ""
-msgid ""
-" are available for monitoring without having to log onto the Windows server"
-msgstr ""
-msgid "  to run Perfmon directly."
-msgstr ""
-msgid ""
-"It can also be used in scripts that automatically create the monitoring "
-"service"
-msgstr ""
-msgid " configuration files."
-msgstr ""
-msgid "check_nt -H 192.168.1.1 -p 1248 -v INSTANCES -l Process"
-msgstr ""
-msgid ""
-"- The NSClient service should be running on the server to get any information"
-msgstr ""
-"- Le service NSClient doit rouler sur le serveur pour obtenir les "
-"informations"
-msgid "- Critical thresholds should be lower than warning thresholds"
-msgstr ""
-"- Les seuils critiques doivent être plus bas que les seuils d'avertissement"
-msgid "- Default port 1248 is sometimes in use by other services. The error"
-msgstr ""
-"- Le port par défaut 1248 est parfois utilisé par d'autres services. L'erreur"
-msgid ""
-"output when this happens contains \"Cannot map xxxxx to protocol number\"."
-msgstr "qui en résulte contiens \"Cannot map xxxxx to protocol number\"."
-msgid "One fix for this is to change the port to something else on check_nt "
-msgstr ""
-"Une possibilité pour corriger ce problème est de changer le port dans "
-"check_nt "
-msgid "and on the client service it's connecting to."
-msgstr "et dans le service auquel il se connecte."
-#, c-format
-msgid "jitter response too large (%lu bytes)\n"
-msgstr ""
-msgid "NTP CRITICAL:"
-msgstr "NTP CRITIQUE:"
-msgid "NTP WARNING:"
-msgstr "NTP AVERTISSEMENT:"
-msgid "NTP OK:"
-msgstr "NTP OK:"
-msgid "NTP UNKNOWN:"
-msgstr "NTP INCONNU:"
-msgid "Offset unknown"
-msgstr "Décalage inconnu"
-msgid "Offset"
-msgstr "Décalage"
-msgid "This plugin checks the selected ntp server"
-msgstr "Ce plugin vérifie le service ntp sur l'hôte"
-msgid "Offset to result in warning status (seconds)"
-msgstr "Décalage résultant en un avertissement (secondes)"
-msgid "Offset to result in critical status (seconds)"
-msgstr "Décalage résultant en un état critique (secondes)"
-msgid "Warning threshold for jitter"
-msgstr "Seuil d'avertissement pour la variation (jitter)"
-msgid "Critical threshold for jitter"
-msgstr "Seuil critique pour la variation (jitter)"
-msgid "Normal offset check:"
-msgstr "Vérification normale du décalage:"
-msgid ""
-"Check jitter too, avoiding critical notifications if jitter isn't available"
-msgstr ""
-"Vérifier aussi la variation (jitter) en évitant les notifications s'il n'est "
-"pas dispoible"
-msgid "(See Notes above for more details on thresholds formats):"
-msgstr ""
-"(Voir les Notes ci-dessus pour plus de détails sur le format des seuils)"
-msgid "WARNING: check_ntp is deprecated. Please use check_ntp_peer or"
-msgstr "ATTENTION: check_ntp est périmé, utilisez plutôt check_ntp_peer"
-msgid "check_ntp_time instead."
-msgstr "ou check_ntp_time."
-msgid "Server not synchronized"
-msgstr "Le serveur n'est pas synchronisé"
-msgid "Server has the LI_ALARM bit set"
-msgstr ""
-msgid ""
-"Returns UNKNOWN instead of CRITICAL or WARNING if server isn't synchronized"
-msgstr ""
-"Retourne INCONNU au lieu de CRITIQUE ou AVERTISSEMENT si le serveur n'est "
-"pas synchronisé"
-#, fuzzy
-msgid "Warning threshold for stratum of server's synchronization peer"
-msgstr "Seuil d'avertissement pour le stratum"
-#, fuzzy
-msgid "Critical threshold for stratum of server's synchronization peer"
-msgstr "Seuil critique pour le stratum"
-msgid "Warning threshold for number of usable time sources (\"truechimers\")"
-msgstr ""
-"Seuil d'avertissement pour le nombre de sources de temps utilisable "
-"(\"truechimers\")"
-msgid "Critical threshold for number of usable time sources (\"truechimers\")"
-msgstr ""
-"Seuil critique pour le nombre de sources de temps utilisable "
-"(\"truechimers\")"
-msgid "This plugin checks an NTP server independent of any commandline"
-msgstr "Ce plugin vérifie un serveur NTP sans recours aux programmes de"
-msgid "programs or external libraries."
-msgstr "la ligne de commande ou libraries externes"
-msgid "Use this plugin to check the health of an NTP server. It supports"
-msgstr ""
-"Utilisez ce plugin pour vérifier le service NTP sur l'hôte. Il supporte la"
-msgid "checking the offset with the sync peer, the jitter and stratum. This"
-msgstr ""
-"vérification du décalage avec le pair se synchronisation, la variation "
-"(jitter) et le stratum."
-msgid "plugin will not check the clock offset between the local host and NTP"
-msgstr ""
-"Ce plugin ne vérifie pas le décalage entre le serveur local et le serveur"
-msgid "server; please use check_ntp_time for that purpose."
-msgstr "NTP; utilisez plutôt check_ntp_time à cette fin."
-msgid "Simple NTP server check:"
-msgstr "Vérification simple du serveur NTP:"
-msgid "Only check the number of usable time sources (\"truechimers\"):"
-msgstr ""
-msgid "Check only stratum:"
-msgstr "Vérification du stratum seulement:"
-msgid "This plugin checks the clock offset with the ntp server"
-msgstr "Ce plugin vérifie le décalage de l'horloge avec le serveur ntp"
-msgid "Returns UNKNOWN instead of CRITICAL if offset cannot be found"
-msgstr "Retourne INCONNU au lieu de CRITIQUE si le décalage est inconnu"
-msgid "Expected offset of the ntp server relative to local server (seconds)"
-msgstr ""
-msgid "This plugin checks the clock offset between the local host and a"
-msgstr "Ce plugin vérifie le décalage de l'horloge entre se serveur local et"
-msgid "remote NTP server. It is independent of any commandline programs or"
-msgstr "le serveur NTP distant. Il ne fait aucun recours aux programmes de"
-msgid "external libraries."
-msgstr "la ligne de commande ou libraries externes."
-msgid "If you'd rather want to monitor an NTP server, please use"
-msgstr "Si vous voulez plutôt surveiller un serveur NTP, veuillez"
-msgid "check_ntp_peer."
-msgstr "utiliser check_ntp_peer."
-msgid "--time-offset is useful for compensating for servers with known"
-msgstr ""
-msgid "and expected clock skew."
-msgstr ""
-#, c-format
-msgid "NetWare %s: "
-msgstr "NetWare %s: "
-#, c-format
-msgid "Up %s,"
-msgstr "Démarré %s,"
-#, c-format
-msgid "Load %s - %s %s-min load average = %lu%%|load%s=%lu;%lu;%lu;0;100"
-msgstr ""
-"Charge %s - %s %s charge système minimale = %lu%%|charge%s=%lu;%lu;%lu;0;100"
-#, c-format
-msgid "Conns %s - %lu current connections|Conns=%lu;%lu;%lu;;"
-msgstr "Conns %s - %lu connections actuelles|Conns=%lu;%lu;%lu;;"
-#, c-format
-msgid "%s: Long term cache hits = %lu%%"
-msgstr "%s: Accès cache longue durée = %lu%%"
-#, c-format
-msgid "%s: Total cache buffers = %lu|Cachebuffers=%lu;%lu;%lu;;"
-msgstr "%s: Total des caches tampons= %lu|Caches Tampons=%lu,%lu;%lu;;"
-#, c-format
-msgid "%s: Dirty cache buffers = %lu|Dirty-Cache-Buffers=%lu;%lu;%lu;;"
-msgstr "%s: cache tampons sales = %lu|caches tampons sales=%lu;%lu;%lu;;"
-#, c-format
-msgid "%s: LRU sitting time = %lu minutes"
-msgstr ""
-#, c-format
-msgid "CRITICAL - Volume '%s' does not exist!"
-msgstr "CRITIQUE: Le volume '%s' n'existe pas!"
-#, c-format
-msgid "%s%lu KB free on volume %s|KBFree%s=%lu;%lu;%lu;;"
-msgstr "%s%lu KB libre sur le volume %s|KB libres%s=%lu;%lu;%lu;;"
-msgid "Only "
-msgstr "Seulement"
-#, c-format
-msgid "%s%lu MB free on volume %s|MBFree%s=%lu;%lu;%lu;;"
-msgstr "%s%lu MB libre sur le volume %s|MBlibre%s=%lu;%lu;%lu;;"
-#, c-format
-msgid "%s%lu MB used on volume %s|MBUsed%s=%lu;%lu;%lu;;"
-msgstr ""
-#, c-format
-msgid ""
-"%lu MB (%lu%%) free on volume %s - total %lu MB|FreeMB%s=%lu;%lu;%lu;0;100"
-msgstr ""
-"%lu MB (%lu%%) libre sur le volume %s - total %lu MB|MBlibre%s=%lu;%lu;"
-"%lu;0;100"
-#, c-format
-msgid "Directory Services Database is %s (DS version %s)"
-msgstr "La base de données Directory Services est %s (DS version %s)"
-#, c-format
-msgid "Logins are %s"
-msgstr "Les logins sont %s"
-msgid "enabled"
-msgstr "activé"
-msgid "disabled"
-msgstr "désactivé"
-msgid "CRITICAL - NRM Status is bad!"
-msgstr "CRITIQUE - le statut NRM est mauvais!"
-msgid "Warning - NRM Status is suspect!"
-msgstr ""
-msgid "OK - NRM Status is good!"
-msgstr "OK - Le status du NRM est bon!"
-#, c-format
-msgid "%lu of %lu (%lu%%) packet receive buffers used"
-msgstr "%lu de %lu (%lu%%) paquets du tampon de réception utilisés"
-#, c-format
-msgid "%lu entries in SAP table"
-msgstr "%lu entrées dans la table SAP"
-#, c-format
-msgid "%lu entries in SAP table for SAP type %d"
-msgstr "%lu entrées dans la table SAP pour le type SAP %d"
-#, c-format
-msgid "%s%lu KB purgeable on volume %s|Purge%s=%lu;%lu;%lu;;"
-msgstr "%s%lu KB effaçables sur le volume %s|Purge%s=%lu;%lu;%lu;;"
-#, c-format
-msgid "%s%lu MB purgeable on volume %s|Purge%s=%lu;%lu;%lu;;"
-msgstr "%s%lu KB effaçables sur le volume %s|Purge%s=%lu;%lu;%lu;;"
-#, c-format
-msgid "%lu MB (%lu%%) purgeable on volume %s|Purgeable%s=%lu;%lu;%lu;0;100"
-msgstr ""
-"%lu MB (%lu%%) effaçables sur le volume %s|Effacable%s=%lu;%lu;%lu;0;100"
-#, c-format
-msgid "%s%lu KB not yet purgeable on volume %s"
-msgstr "%s%lu KB pas encore effaçables sur le volume %s"
-#, c-format
-msgid "%lu MB (%lu%%) not yet purgeable on volume %s"
-msgstr "%lu MB (%lu%%) pas encore effaçables sur le volume %s"
-#, c-format
-msgid "%lu open files|Openfiles=%lu;%lu;%lu;0,0"
-msgstr ""
-#, c-format
-msgid "%lu abended threads|Abends=%lu;%lu;%lu;;"
-msgstr "%lu processus avortés|Avortés=%lu;%lu;%lu;;"
-#, c-format
-msgid "%lu current service processes (%lu max)|Processes=%lu;%lu;%lu;0;%lu"
-msgstr "%lu processus services actuels (%lu max)|Processus=%lu;%lu;%lu;0;%lu"
-msgid "CRITICAL - Time not in sync with network!"
-msgstr "CRITIQUE - Le temps n'est pas synchronisé avec le réseau!"
-msgid "OK - Time in sync with network!"
-msgstr "OK - Le temps est synchronisé avec le réseau!"
-#, c-format
-msgid "LRU sitting time = %lu seconds"
-msgstr "LRU temps d'attente = %lu secondes"
-#, c-format
-msgid "Dirty cache buffers = %lu%% of the total|DCB=%lu;%lu;%lu;0;100"
-msgstr "Buffers cache sales = %lu%% du total|DCB=%lu;%lu;%lu;0;100"
-#, c-format
-msgid "Total cache buffers = %lu%% of the original|TCB=%lu;%lu;%lu;0;100"
-msgstr "cache tampons totaux= %lu%% de l'original|TCB=%lu;%lu;%lu;0;100"
-#, c-format
-msgid "NDS Version %s"
-msgstr "Version NDS %s"
-#, c-format
-msgid "Up %s"
-msgstr "Démarré %s"
-#, c-format
-msgid "Module %s version %s is loaded"
-msgstr "Le Module %s version %s est chargé"
-#, c-format
-msgid "Module %s is not loaded"
-msgstr "Le Module %s n'est pas chargé"
-#, c-format
-msgid "CRITICAL - Value '%s' does not exist!"
-msgstr "CRITIQUE: Le valeur '%s' n'existe pas!"
-#, c-format
-msgid "%s is  %lu|%s=%lu;%lu;%lu;;"
-msgstr "%s est  %lu|%s=%lu;%lu;%lu;;"
-msgid "Nothing to check!\n"
-msgstr "Rien à vérifier!\n"
-msgid "Server port an integer\n"
-msgstr "Le port du serveur doit être un nombre entier\n"
-msgid "This plugin attempts to contact the MRTGEXT NLM running on a"
-msgstr "Ce plugin essaye de contacter le NLM MRTGEXT qui s'exécute sur"
-msgid "Novell server to gather the requested system information."
-msgstr "un serveur Novell pour récupérer l'information système demandée."
-msgid "Variable to check.  Valid variables include:"
-msgstr "Variable à vérifier.  Les variables valides sont:"
-msgid "LOAD1     = 1 minute average CPU load"
-msgstr ""
-msgid "LOAD5     = 5 minute average CPU load"
-msgstr ""
-msgid "LOAD15    = 15 minute average CPU load"
-msgstr ""
-msgid "CSPROCS   = number of current service processes (NW 5.x only)"
-msgstr "CSPROCS   = nombres de processus services actuels (NW 5.x seulement)"
-msgid "ABENDS    = number of abended threads (NW 5.x only)"
-msgstr ""
-msgid "UPTIME    = server uptime"
-msgstr ""
-msgid "LTCH      = percent long term cache hits"
-msgstr ""
-msgid "CBUFF     = current number of cache buffers"
-msgstr ""
-msgid "CDBUFF    = current number of dirty cache buffers"
-msgstr ""
-msgid "DCB       = dirty cache buffers as a percentage of the total"
-msgstr ""
-msgid "TCB       = dirty cache buffers as a percentage of the original"
-msgstr ""
-msgid "OFILES    = number of open files"
-msgstr ""
-msgid "    VMF<vol>  = MB of free space on Volume <vol>"
-msgstr ""
-msgid "    VMU<vol>  = MB used space on Volume <vol>"
-msgstr ""
-msgid "    VMP<vol>  = MB of purgeable space on Volume <vol>"
-msgstr ""
-msgid "    VPF<vol>  = percent free space on volume <vol>"
-msgstr ""
-msgid "    VKF<vol>  = KB of free space on volume <vol>"
-msgstr ""
-msgid "    VPP<vol>  = percent purgeable space on volume <vol>"
-msgstr ""
-msgid "    VKP<vol>  = KB of purgeable space on volume <vol>"
-msgstr ""
-msgid "    VPNP<vol> = percent not yet purgeable space on volume <vol>"
-msgstr ""
-msgid "    VKNP<vol> = KB of not yet purgeable space on volume <vol>"
-msgstr ""
-msgid "    LRUM      = LRU sitting time in minutes"
-msgstr ""
-msgid "    LRUS      = LRU sitting time in seconds"
-msgstr "    LRUS       = LRU temps d'attente en secondes"
-msgid "    DSDB      = check to see if DS Database is open"
-msgstr ""
-msgid "    DSVER     = NDS version"
-msgstr ""
-msgid "    UPRB      = used packet receive buffers"
-msgstr "    UPRB      = paquets du tampon de réception utilisés"
-msgid "    PUPRB     = percent (of max) used packet receive buffers"
-msgstr ""
-msgid "    SAPENTRIES = number of entries in the SAP table"
-msgstr ""
-msgid "    SAPENTRIES<n> = number of entries in the SAP table for SAP type <n>"
-msgstr "    SAPENTRIES<n> = entrées dans la table SAP pour le type SAP <n>"
-msgid "    TSYNC     = timesync status"
-msgstr ""
-msgid "    LOGINS    = check to see if logins are enabled"
-msgstr ""
-msgid "    CONNS     = number of currently licensed connections"
-msgstr ""
-msgid "    NRMH\t= NRM Summary Status"
-msgstr ""
-msgid "    NRMP<stat> = Returns the current value for a NRM health item"
-msgstr ""
-msgid "    NRMM<stat> = Returns the current memory stats from NRM"
-msgstr ""
-msgid "    NRMS<stat> = Returns the current Swapfile stats from NRM"
-msgstr ""
-msgid "    NSS1<stat> = Statistics from _Admin:Manage_NSS\\GeneralStats.xml"
-msgstr ""
-msgid "    NSS3<stat> = Statistics from _Admin:Manage_NSS\\NameCache.xml"
-msgstr ""
-msgid "    NSS4<stat> = Statistics from _Admin:Manage_NSS\\FileStats.xml"
-msgstr ""
-msgid "    NSS5<stat> = Statistics from _Admin:Manage_NSS\\ObjectCache.xml"
-msgstr ""
-msgid "    NSS6<stat> = Statistics from _Admin:Manage_NSS\\Thread.xml"
-msgstr ""
-msgid ""
-"    NSS7<stat> = Statistics from _Admin:Manage_NSS\\AuthorizationCache.xml"
-msgstr ""
-msgid "    NLM:<nlm> = check if NLM is loaded and report version"
-msgstr ""
-msgid "                (e.g. NLM:TSANDS.NLM)"
-msgstr ""
-msgid "Include server version string in results"
-msgstr ""
-msgid "- This plugin requires that the MRTGEXT.NLM file from James Drews' MRTG"
-msgstr ""
-msgid ""
-"  extension for NetWare be loaded on the Novell servers you wish to check."
-msgstr ""
-msgid "  (available from http://www.engr.wisc.edu/~drews/mrtg/)"
-msgstr "  (disponible depuis http://www.engr.wisc.edu/~drews/mrtg/)"
-msgid ""
-"- Values for critical thresholds should be lower than warning thresholds"
-msgstr ""
-msgid ""
-"  when the following variables are checked: VPF, VKF, LTCH, CBUFF, DCB, "
-msgstr ""
-msgid "  TCB, LRUS and LRUM."
-msgstr ""
-msgid "Unknown error fetching load data\n"
-msgstr ""
-"Erreur inconnue lors de la récupération des données de charge système\n"
-msgid "Invalid response from server - no load information\n"
-msgstr "Réponse invalide du serveur - pas d'information de charge système\n"
-msgid "Invalid response from server after load 1\n"
-msgstr "Réponse invalide du serveur après charge système à 1 minute\n"
-msgid "Invalid response from server after load 5\n"
-msgstr "Réponse invalide du serveur après charge système à 5 minute\n"
-#, c-format
-msgid "Load %s - %s-min load average = %0.2f"
-msgstr "Charge %s - %s-moyenne minimale de charge système = %0.2f"
-msgid "Unknown error fetching disk data\n"
-msgstr "Erreur inconnue en récupérant les données des disques\n"
-msgid "Invalid response from server\n"
-msgstr "Réponse invalide reçue du serveur\n"
-msgid "Unknown error fetching network status\n"
-msgstr "Erreur inconnue lors de la réception de l'état du réseau\n"
-#, c-format
-msgid "Net %s - %d connection%s on port %d"
-msgstr "Net %s - %d connections%s sur le port %d"
-msgid "Unknown error fetching process status\n"
-msgstr "Erreur inconnue en récupérant l'état des processus\n"
-#, c-format
-msgid "Process %s - %d instance%s of %s running"
-msgstr "Processus %s - %d instances%s de %s démarrées"
-#, c-format
-msgid "Uptime %s - Up %d days %d hours %d minutes"
-msgstr "Temps de fonctionnement %s - Up %d jours %d heures %d minutes"
-msgid ""
-"This plugin attempts to contact the Over-CR collector daemon running on the"
-msgstr ""
-"Ce plugin essaye de joindre le service Over CR tournant sur le serveur UNIX"
-msgid "remote UNIX server in order to gather the requested system information."
-msgstr "distant afin de récupérer les informations système demandées."
-msgid "LOAD1         = 1 minute average CPU load"
-msgstr ""
-msgid "LOAD5         = 5 minute average CPU load"
-msgstr ""
-msgid "LOAD15        = 15 minute average CPU load"
-msgstr ""
-msgid "DPU<filesys>  = percent used disk space on filesystem <filesys>"
-msgstr ""
-msgid "PROC<process> = number of running processes with name <process>"
-msgstr ""
-msgid "NET<port>     = number of active connections on TCP port <port>"
-msgstr ""
-msgid "UPTIME        = system uptime in seconds"
-msgstr ""
-msgid "This plugin requires that Eric Molitors' Over-CR collector daemon be"
-msgstr "Ce plugin requiert que le daemon collecteur Over-CR d'Eric Molitors"
-msgid "running on the remote server."
-msgstr "soit fonctionnel sur le serveur distant"
-msgid "Over-CR can be downloaded from http://www.molitor.org/overcr"
-msgstr ""
-msgid "This plugin was tested with version 0.99.53 of the Over-CR collector"
-msgstr "Ce plugin a été testé avec la version 0.99.53 su collecteur Over-CR"
-msgid ""
-"For the available options, the critical threshold value should always be"
-msgstr ""
-"Pour toutes les options disponibles, le seuil critique doit toujours être"
-msgid ""
-"higher than the warning threshold value, EXCEPT with the uptime variable"
-msgstr "plus grand que le seuil d'alerte SAUF pour l'option uptime"
-#, c-format
-msgid "CRITICAL - no connection to '%s' (%s).\n"
-msgstr "CRITIQUE - pas de connexion à '%s' (%s).\n"
-#, fuzzy, c-format
-msgid " %s - database %s (%f sec.)|%s\n"
-msgstr " %s - base de données %s (%d sec.)|%s\n"
-msgid "Critical threshold must be a positive integer"
-msgstr "Le seuil critique doit être un entier positif"
-msgid "Warning threshold must be a positive integer"
-msgstr "Le seuil d'avertissement doit être un entier positif"
-#, fuzzy
-msgid "Database name exceeds the maximum length"
-msgstr "Le nom de la base de données est invalide"
-msgid "User name is not valid"
-msgstr "Le nom de l'utilisateur est invalide"
-#, c-format
-msgid "Test whether a PostgreSQL Database is accepting connections."
-msgstr "Teste si une base de données Postgresql accepte les connections."
-msgid "Database to check "
-msgstr ""
-#, fuzzy, c-format
-msgid "(default: %s)\n"
-msgstr "(Défaut: %d)\n"
-msgid "Login name of user"
-msgstr "Le nom d'un utilisateur"
-msgid "Password (BIG SECURITY ISSUE)"
-msgstr ""
-msgid "Connection parameters (keyword = value), see below"
-msgstr ""
-msgid "SQL query to run. Only first column in first row will be read"
-msgstr ""
-msgid "A name for the query, this string is used instead of the query"
-msgstr ""
-msgid "in the long output of the plugin"
-msgstr ""
-#, fuzzy
-msgid "SQL query value to result in warning status (double)"
-msgstr "Décalage résultant en un avertissement (secondes)"
-#, fuzzy
-msgid "SQL query value to result in critical status (double)"
-msgstr "Décalage résultant en un état critique (secondes)"
-msgid "All parameters are optional."
-msgstr ""
-msgid ""
-"This plugin tests a PostgreSQL DBMS to determine whether it is active and"
-msgstr ""
-msgid "accepting queries. In its current operation, it simply connects to the"
-msgstr ""
-msgid ""
-"specified database, and then disconnects. If no database is specified, it"
-msgstr ""
-msgid ""
-"connects to the template1 database, which is present in every functioning"
-msgstr ""
-msgid "PostgreSQL DBMS."
-msgstr ""
-msgid "If a query is specified using the -q option, it will be executed after"
-msgstr ""
-msgid "connecting to the server. The result from the query has to be numeric."
-msgstr ""
-msgid ""
-"Multiple SQL commands, separated by semicolon, are allowed but the result "
-msgstr ""
-msgid "of the last command is taken into account only. The value of the first"
-msgstr ""
-msgid ""
-"column in the first row is used as the check result. If a second column is"
-msgstr ""
-msgid "present in the result set, this is added to the plugin output with a"
-msgstr ""
-msgid ""
-"prefix of \"Extra Info:\". This information can be displayed in the system"
-msgstr ""
-msgid "executing the plugin."
-msgstr ""
-msgid ""
-"See the chapter \"Monitoring Database Activity\" of the PostgreSQL manual"
-msgstr ""
-msgid ""
-"for details about how to access internal statistics of the database server."
-msgstr ""
-msgid ""
-"For a list of available connection parameters which may be used with the -o"
-msgstr ""
-msgid ""
-"command line option, see the documentation for PQconnectdb() in the chapter"
-msgstr ""
-msgid ""
-"\"libpq - C Library\" of the PostgreSQL manual. For example, this may be"
-msgstr ""
-msgid ""
-"used to specify a service name in pg_service.conf to be used for additional"
-msgstr ""
-msgid "connection parameters: -o 'service=<name>' or to specify the SSL mode:"
-msgstr ""
-msgid "-o 'sslmode=require'."
-msgstr ""
-msgid ""
-"The plugin will connect to a local postmaster if no host is specified. To"
-msgstr ""
-"Ce plugin va se connecter sur un postmaster local si aucun hôte n'est "
-"spécifié."
-msgid ""
-"connect to a remote host, be sure that the remote postmaster accepts TCP/IP"
-msgstr ""
-msgid "connections (start the postmaster with the -i option)."
-msgstr ""
-msgid ""
-"Typically, the monitoring user (unless the --logname option is used) should "
-"be"
-msgstr ""
-msgid ""
-"able to connect to the database without a password. The plugin can also send"
-msgstr ""
-msgid "a password, but no effort is made to obscure or encrypt the password."
-msgstr ""
-#, c-format
-msgid "QUERY %s - %s: %s.\n"
-msgstr ""
-msgid "Error with query"
-msgstr ""
-#, fuzzy
-msgid "No rows returned"
-msgstr "Pas de données valides reçues"
-#, fuzzy
-msgid "No columns returned"
-msgstr "Pas de données valides reçues"
-#, fuzzy
-msgid "No data returned"
-msgstr "Pas de données valides reçues"
-msgid "Is not a numeric"
-msgstr ""
-#, fuzzy, c-format
-msgid "%s returned %f"
-msgstr ". %s renvoie %s"
-#, fuzzy, c-format
-msgid "'%s' returned %f"
-msgstr ". %s renvoie %s"
-msgid "CRITICAL - Could not interpret output from ping command\n"
-msgstr "CRITIQUE - Impossible d'interpréter le réponse de la commande ping\n"
-#, c-format
-msgid "PING %s - %sPacket loss = %d%%"
-msgstr "PING %s - %s Paquets perdus = %d%%"
-#, c-format
-msgid "PING %s - %sPacket loss = %d%%, RTA = %2.2f ms"
-msgstr "PING %s - %s Paquets perdus = %d%%, RTA = %2.2f ms"
-msgid "Could not realloc() addresses\n"
-msgstr "Impossible de réallouer les adresses\n"
-#, c-format
-msgid "<max_packets> (%s) must be a non-negative number\n"
-msgstr "<max_packets> (%s) doit être un nombre positif\n"
-#, c-format
-msgid "<wpl> (%s) must be an integer percentage\n"
-msgstr "<wpl> (%s) doit être un pourcentage entier\n"
-#, c-format
-msgid "<cpl> (%s) must be an integer percentage\n"
-msgstr "<cpl> (%s) doit être un pourcentage entier\n"
-#, c-format
-msgid "<wrta> (%s) must be a non-negative number\n"
-msgstr "<wrta> (%s) doit être un nombre positif\n"
-#, c-format
-msgid "<crta> (%s) must be a non-negative number\n"
-msgstr "<crta> (%s) doit être un nombre positif\n"
-#, c-format
-msgid ""
-"%s: Warning threshold must be integer or percentage!\n"
-"\n"
-msgstr "%s: Le seuil d'avertissement doit être un entier ou un pourcentage!\n"
-#, c-format
-msgid "<wrta> was not set\n"
-msgstr "<wrta> n'a pas été indiqué\n"
-#, c-format
-msgid "<crta> was not set\n"
-msgstr "<crta> n'a pas été indiqué\n"
-#, c-format
-msgid "<wpl> was not set\n"
-msgstr " <wpl> n'a pas été indiqué\n"
-#, c-format
-msgid "<cpl> was not set\n"
-msgstr "<cpl> n'a pas été indiqué\n"
-#, c-format
-msgid "<wrta> (%f) cannot be larger than <crta> (%f)\n"
-msgstr "<wrta> (%f) ne peut pas être plus large que <crta> (%f)\n"
-#, c-format
-msgid "<wpl> (%d) cannot be larger than <cpl> (%d)\n"
-msgstr "<wpl> (%d) ne peut pas être plus large que <cpl> (%d)\n"
-#, c-format
-msgid "Cannot open stderr for %s\n"
-msgstr "Impossible d'ouvrir le canal d'erreur standard pour %s\n"
-msgid "System call sent warnings to stderr "
-msgstr ""
-"Les appel système enverront leurs messages d'avertissement vers le canal "
-"d'erreur standard"
-#, fuzzy, c-format
-msgid "CRITICAL - Network Unreachable (%s)\n"
-msgstr "CRITIQUE - Le réseau est inaccessible (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Host Unreachable (%s)\n"
-msgstr "CRITIQUE - Hôte inaccessible (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Bogus ICMP: Port Unreachable (%s)\n"
-msgstr "CRITIQUE - Paquet ICMP incorrect: Port inaccessible (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Bogus ICMP: Protocol Unreachable (%s)\n"
-msgstr "CRITIQUE - Paquet ICMP incorrect: Protocole inaccessible (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Network Prohibited (%s)\n"
-msgstr "CRITIQUE - L'accès au réseau est interdit (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Host Prohibited (%s)\n"
-msgstr "CRITIQUE - L'accès a l'hôte est interdit (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Packet Filtered (%s)\n"
-msgstr "CRITIQUE - Paquet filtré (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Host not found (%s)\n"
-msgstr "CRITIQUE - Hôte non trouvé (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Time to live exceeded (%s)\n"
-msgstr "CRITIQUE - La durée de vie du paquet est dépassée (%s)"
-#, fuzzy, c-format
-msgid "CRITICAL - Destination Unreachable (%s)\n"
-msgstr "CRITIQUE - Hôte inaccessible (%s)"
-#, fuzzy
-msgid "Unable to realloc warn_text\n"
-msgstr "Impossible de réattribuer le texte d'avertissement"
-#, c-format
-msgid "Use ping to check connection statistics for a remote host."
-msgstr ""
-"Utilise ping pour vérifier les statistiques de connections d'un hôte distant."
-msgid "host to ping"
-msgstr "hôte à tester"
-msgid "number of ICMP ECHO packets to send"
-msgstr "nombre de paquets ICMP à envoyer"
-#, c-format
-msgid "(Default: %d)\n"
-msgstr "(Défaut: %d)\n"
-msgid "show HTML in the plugin output (obsoleted by urlize)"
-msgstr ""
-msgid "THRESHOLD is <rta>,<pl>% where <rta> is the round trip average travel"
-msgstr ""
-"Le seuil est <rta>,<pl>% où <rta> est le temps moyen pour l'aller retour (ms)"
-msgid "time (ms) which triggers a WARNING or CRITICAL state, and <pl> is the"
-msgstr "qui déclenche un résultat AVERTISSEMENT ou CRITIQUE, et <pl> est le "
-msgid "percentage of packet loss to trigger an alarm state."
-msgstr "pourcentage de paquets perdus pour déclencher une alarme."
-msgid ""
-"This plugin uses the ping command to probe the specified host for packet loss"
-msgstr ""
-"Ce plugin utilise la commande ping pour vérifier l'hôte spécifié pour les "
-"pertes de paquets"
-msgid ""
-"(percentage) and round trip average (milliseconds). It can produce HTML "
-"output"
-msgstr ""
-msgid ""
-"linking to a traceroute CGI contributed by Ian Cass. The CGI can be found in"
-msgstr ""
-msgid "the contrib area of the downloads section at http://www.nagios.org/"
-msgstr ""
-#, c-format
-msgid "CMD: %s\n"
-msgstr "Commande: %s\n"
-msgid "System call sent warnings to stderr"
-msgstr ""
-"L'appel système à retourné des avertissement vers le canal d'erreur standard"
-#, c-format
-msgid "Not parseable: %s"
-msgstr "Impossible de parcourir les arguments: %s"
-#, c-format
-msgid "Unable to read output\n"
-msgstr "Impossible de lire les données en entrée\n"
-#, c-format
-msgid "%d warn out of "
-msgstr "%d avertissements sur"
-#, c-format
-msgid "%d crit, %d warn out of "
-msgstr "%d crit, %d alertes sur "
-#, c-format
-msgid " with %s"
-msgstr " avec %s"
-msgid "Parent Process ID must be an integer!"
-msgstr "L'identifiant du processus parent doit être un entier!"
-#, c-format
-msgid "%s%sSTATE = %s"
-msgstr "%s%sETAT = %s"
-msgid "UID was not found"
-msgstr "L'UID n'a pas été trouvé"
-msgid "User name was not found"
-msgstr "L'utilisateur n'a pas été trouvé"
-#, c-format
-msgid "%s%scommand name '%s'"
-msgstr "%s%snom de la commande '%s'"
-#, c-format
-msgid "%s%sexclude progs '%s'"
-msgstr ""
-msgid "RSS must be an integer!"
-msgstr "RSS doit être un entier!"
-msgid "VSZ must be an integer!"
-msgstr "VSZ doit être un entier!"
-msgid "PCPU must be a float!"
-msgstr "PCPU doit être un nombre en virgule flottante!"
-msgid "Metric must be one of PROCS, VSZ, RSS, CPU, ELAPSED!"
-msgstr "Metric doit être l'un des PROCS, VSZ, RSS, CPU, ELAPSED!"
-msgid ""
-"Checks all processes and generates WARNING or CRITICAL states if the "
-"specified"
-msgstr ""
-msgid ""
-"metric is outside the required threshold ranges. The metric defaults to "
-"number"
-msgstr ""
-msgid ""
-"of processes.  Search filters can be applied to limit the processes to check."
-msgstr ""
-msgid "Generate warning state if metric is outside this range"
-msgstr ""
-msgid "Generate critical state if metric is outside this range"
-msgstr ""
-msgid "Check thresholds against metric. Valid types:"
-msgstr ""
-msgid "PROCS   - number of processes (default)"
-msgstr "PROCS   - nombre de  processus (défaut)"
-msgid "VSZ     - virtual memory size"
-msgstr "VSZ     - taille mémoire virtuelle"
-msgid "RSS     - resident set memory size"
-msgstr ""
-msgid "CPU     - percentage CPU"
-msgstr "CPU     - pourcentage du processeur"
-msgid "ELAPSED - time elapsed in seconds"
-msgstr "ELAPSED - temps écoulé en secondes"
-msgid "Extra information. Up to 3 verbosity levels"
-msgstr "informations supplémentaires. Jusqu'à 3 niveaux de verbosité"
-msgid "Filter own process the traditional way by PID instead of /proc/pid/exe"
-msgstr ""
-msgid "Only scan for processes that have, in the output of `ps`, one or"
-msgstr ""
-msgid "more of the status flags you specify (for example R, Z, S, RS,"
-msgstr ""
-msgid "RSZDT, plus others based on the output of your 'ps' command)."
-msgstr ""
-msgid "Only scan for children of the parent process ID indicated."
-msgstr ""
-msgid "Only scan for processes with VSZ higher than indicated."
-msgstr ""
-msgid "Only scan for processes with RSS higher than indicated."
-msgstr ""
-msgid "Only scan for processes with PCPU higher than indicated."
-msgstr ""
-msgid "Only scan for processes with user name or ID indicated."
-msgstr ""
-msgid "Only scan for processes with args that contain STRING."
-msgstr ""
-msgid "Only scan for processes with args that contain the regex STRING."
-msgstr ""
-msgid "Only scan for exact matches of COMMAND (without path)."
-msgstr ""
-msgid "Exclude processes which match this comma separated list"
-msgstr ""
-msgid "Only scan for non kernel threads (works on Linux only)."
-msgstr ""
-#, c-format
-msgid ""
-"\n"
-"RANGEs are specified 'min:max' or 'min:' or ':max' (or 'max'). If\n"
-"specified 'max:min', a warning status will be generated if the\n"
-"count is inside the specified range\n"
-"\n"
-msgstr ""
-"\n"
-"Les seuils sont spécifiés 'min:max' or 'min:' or ':max' (or 'max').\n"
-"Si spécifié 'max:min', un avertissement sera généré si le nombre\n"
-"est à l'intérieur du seuil\n"
-"\n"
-#, c-format
-msgid ""
-"This plugin checks the number of currently running processes and\n"
-"generates WARNING or CRITICAL states if the process count is outside\n"
-"the specified threshold ranges. The process count can be filtered by\n"
-"process owner, parent process PID, current state (e.g., 'Z'), or may\n"
-"be the total number of running processes\n"
-"\n"
-msgstr ""
-"Ce plugin vérifie le nombre de processus actifs et génère un résultat \n"
-"AVERTISSEMENT ou CRITIQUE si le nombre de processus est au dessus du seuil\n"
-"spécifié. Le total des processus peut être filtré par propriétaire, "
-"processus parent,\n"
-"état actuel (ex: 'Z'), ou par le nombre de processus en cours d'exécution\n"
-"\n"
-msgid "Warning if not two processes with command name portsentry."
-msgstr ""
-msgid "Critical if < 2 or > 1024 processes"
-msgstr ""
-msgid "Critical if not at least 1 process with command sshd"
-msgstr ""
-msgid "Warning if > 1024 processes with command name sshd."
-msgstr ""
-msgid "Critical if < 1 processes with command name sshd."
-msgstr ""
-msgid "Warning alert if > 10 processes with command arguments containing"
-msgstr ""
-msgid "'/usr/local/bin/perl' and owned by root"
-msgstr ""
-msgid "Alert if VSZ of any processes over 50K or 100K"
-msgstr ""
-msgid "Alert if CPU of any processes over 10% or 20%"
-msgstr ""
-#, fuzzy
-msgid "Config file error\n"
-msgstr "Erreur dans le fichier de configuration"
-#, fuzzy
-msgid "Out of Memory?\n"
-msgstr "Manque de Mémoire?"
-#, fuzzy
-msgid "Invalid NAS-Identifier\n"
-msgstr "NAS-Identifier invalide"
-#, c-format
-msgid "gethostname() failed!\n"
-msgstr "La commande gethostname() à échoué\n"
-#, fuzzy
-msgid "Invalid NAS-IP-Address\n"
-msgstr "NAS-IP-Address invalide"
-#, fuzzy
-msgid "Timeout\n"
-msgstr "Temps dépassé"
-#, fuzzy
-msgid "Auth Error\n"
-msgstr "Erreur d'authentification"
-#, fuzzy
-msgid "Auth Failed\n"
-msgstr "L'authentification à échoué"
-#, fuzzy
-msgid "Bad Response\n"
-msgstr "Réponse invalide"
-#, fuzzy
-msgid "Auth OK\n"
-msgstr "L'authentification à réussi"
-#, c-format
-msgid "Unexpected result code %d"
-msgstr "Résultat inattendu: %d"
-msgid "Number of retries must be a positive integer"
-msgstr "Le nombre d'essai doit être un entier positif"
-msgid "User not specified"
-msgstr "L'utilisateur n'a pas été spécifié"
-msgid "Password not specified"
-msgstr "Le mot de passe n'a pas été spécifié"
-msgid "Configuration file not specified"
-msgstr "Le fichier de configuration n'a pas été spécifié"
-msgid "Tests to see if a RADIUS server is accepting connections."
-msgstr "Teste si un serveur RADIUS accepte les connections."
-msgid "The user to authenticate"
-msgstr ""
-msgid "Password for authentication (SECURITY RISK)"
-msgstr ""
-msgid "NAS identifier"
-msgstr ""
-msgid "NAS IP Address"
-msgstr "Adresse IP NAS"
-msgid "Configuration file"
-msgstr "Fichier de configuration"
-msgid "Response string to expect from the server"
-msgstr ""
-msgid "Number of times to retry a failed connection"
-msgstr ""
-msgid ""
-"This plugin tests a RADIUS server to see if it is accepting connections."
-msgstr ""
-"Ce plugin teste un serveur RADIUS afin de vérifier si il accepte les "
-"connections."
-msgid ""
-"The server to test must be specified in the invocation, as well as a user"
-msgstr ""
-msgid "name and password. A configuration file must be present. The format of"
-msgstr ""
-msgid ""
-"the configuration file is described in the radiusclient library sources."
-msgstr ""
-msgid "The password option presents a substantial security issue because the"
-msgstr ""
-msgid ""
-"password can possibly be determined by careful watching of the command line"
-msgstr ""
-msgid "in a process listing. This risk is exacerbated because the plugin will"
-msgstr ""
-msgid ""
-"typically be executed at regular predictable intervals. Please be sure that"
-msgstr ""
-msgid "the password used does not allow access to sensitive system resources."
-msgstr ""
-#, c-format
-msgid "Unable to connect to %s on port %d\n"
-msgstr "Impossible de se connecter à %s sur le port %d\n"
-#, c-format
-msgid "No data received from %s\n"
-msgstr "Pas de données reçues de %s\n"
-msgid "Invalid REAL response received from host"
-msgstr "Réponses REAL invalide reçue de l'hôte"
-#, c-format
-msgid "Invalid REAL response received from host on port %d\n"
-msgstr "Réponses REAL invalide reçue de l'hôte sur le port %d\n"
-#, c-format
-msgid "No data received from host\n"
-msgstr "Pas de données reçues de l'hôte\n"
-#, c-format
-msgid "REAL %s - %d second response time\n"
-msgstr "REAL %s - %d secondes de temps de réponse\n"
-msgid "Warning time must be a positive integer"
-msgstr "Le seuil d'avertissement doit être un entier positif"
-msgid "Critical time must be a positive integer"
-msgstr "Le seuil critique doit être un entier positif"
-msgid "You must provide a server to check"
-msgstr "Vous devez fournir un serveur à vérifier"
-msgid "This plugin tests the REAL service on the specified host."
-msgstr "Ce plugin teste le service REAL sur l'hôte spécifié."
-msgid "Connect to this url"
-msgstr ""
-#, c-format
-msgid "String to expect in first line of server response (default: %s)\n"
-msgstr ""
-"Texte attendu dans la première ligne de réponse du serveur (défaut: %s)\n"
-msgid "This plugin will attempt to open an RTSP connection with the host."
-msgstr "Ce plugin va essayer d'ouvrir un connexion RTSP avec l'hôte."
-msgid "Successful connects return STATE_OK, refusals and timeouts return"
-msgstr ""
-msgid ""
-"STATE_CRITICAL, other errors return STATE_UNKNOWN.  Successful connects,"
-msgstr ""
-msgid ""
-"but incorrect response messages from the host result in STATE_WARNING return"
-msgstr ""
-msgid "values."
-msgstr ""
-#, c-format
-msgid "malloc() failed!\n"
-msgstr "l'allocation mémoire à échoué!\n"
-#, c-format
-msgid "CRITICAL - Cannot create SSL context.\n"
-msgstr "CRITIQUE - Impossible de créer le contexte SSL.\n"
-#, c-format
-msgid "recv() failed\n"
-msgstr "La commande recv() à échoué\n"
-#, c-format
-msgid "WARNING - TLS not supported by server\n"
-msgstr "AVERTISSEMENT: - TLS n'est pas supporté par ce serveur\n"
-#, c-format
-msgid "Server does not support STARTTLS\n"
-msgstr "Le serveur ne supporte pas STARTTLS\n"
-msgid "SMTP UNKNOWN - Cannot send EHLO command via TLS."
-msgstr ""
-#, c-format
-msgid "sent %s"
-msgstr "envoyé %s"
-msgid "SMTP UNKNOWN - Cannot read EHLO response via TLS."
-msgstr ""
-#, c-format
-msgid "Invalid SMTP response received from host: %s\n"
-msgstr "Réponse SMTP reçue de l'hôte invalide: %s\n"
-#, c-format
-msgid "Invalid SMTP response received from host on port %d: %s\n"
-msgstr "Réponse SMTP reçue de l'hôte sur le port %d invalide: %s\n"
-#, c-format
-msgid "Could Not Compile Regular Expression"
-msgstr "Impossible de compiler l'expression rationnelle"
-#, c-format
-msgid "SMTP %s - Invalid response '%s' to command '%s'\n"
-msgstr "SMTP %s - réponse invalide de '%s' à la commande '%s'\n"
-#, c-format
-msgid "Execute Error: %s\n"
-msgstr "Erreur d'exécution: %s\n"
-msgid "no authuser specified, "
-msgstr "Pas d'utilisateur pour l'authentification spécifié, "
-msgid "no authpass specified, "
-msgstr "pas de mot de passe spécifié, "
-#, c-format
-msgid "sent %s\n"
-msgstr "envoyé %s\n"
-msgid "recv() failed after AUTH LOGIN, "
-msgstr "recv() à échoué après AUTH LOGIN, "
-#, c-format
-msgid "received %s\n"
-msgstr "reçu %s\n"
-msgid "invalid response received after AUTH LOGIN, "
-msgstr "Réponse invalide reçue après AUTH LOGIN, "
-msgid "recv() failed after sending authuser, "
-msgstr "La commande recv() a échoué après authuser, "
-msgid "invalid response received after authuser, "
-msgstr "Réponse invalide reçue après authuser, "
-msgid "recv() failed after sending authpass, "
-msgstr "la commande recv() à échoué après authpass, "
-msgid "invalid response received after authpass, "
-msgstr "Réponse invalide reçue après authpass, "
-msgid "only authtype LOGIN is supported, "
-msgstr "seul la méthode d'authentification LOGIN est supportée, "
-#, c-format
-msgid "SMTP %s - %s%.3f sec. response time%s%s|%s\n"
-msgstr "SMTP %s - %s%.3f sec. de temps de réponse%s%s|%s\n"
-#, c-format
-msgid "Could not realloc() units [%d]\n"
-msgstr "Impossible de réallouer des unités [%d]\n"
-#, fuzzy
-msgid "Critical time must be a positive"
-msgstr "Le seuil critique doit être un entier positif"
-#, fuzzy
-msgid "Warning time must be a positive"
-msgstr "Le seuil d'avertissement doit être un entier positif"
-msgid "SSL support not available - install OpenSSL and recompile"
-msgstr "SSL n'est pas disponible - installer OpenSSL et recompilez"
-msgid "Set either -s/--ssl/--tls or -S/--starttls"
-msgstr "Définissez -s/--ssl/--tls ou -S/--starttls"
-#, c-format
-msgid "Connection closed by server before sending QUIT command\n"
-msgstr ""
-#, c-format
-msgid "recv() failed after QUIT."
-msgstr "recv() à échoué après QUIT."
-#, c-format
-msgid "Connection reset by peer."
-msgstr ""
-msgid "This plugin will attempt to open an SMTP connection with the host."
-msgstr "Ce plugin va essayer d'ouvrir un connexion SMTP avec l'hôte."
-#, c-format
-msgid "    String to expect in first line of server response (default: '%s')\n"
-msgstr ""
-"   Texte attendu dans la première ligne de réponse du serveur (défaut: "
-"'%s')\n"
-msgid "SMTP command (may be used repeatedly)"
-msgstr "Commande SMTP (peut être utilisé plusieurs fois)"
-msgid "Expected response to command (may be used repeatedly)"
-msgstr ""
-msgid "FROM-address to include in MAIL command, required by Exchange 2000"
-msgstr ""
-msgid "FQDN used for HELO"
-msgstr ""
-msgid "Use PROXY protocol prefix for the connection."
-msgstr "Utiliser le préfixe du protocole PROXY pour la connexion."
-msgid "Minimum number of days a certificate has to be valid."
-msgstr "Nombre de jours minimum pour que le certificat soit valide."
-#, fuzzy
-msgid "Use SSL/TLS for the connection."
-msgstr "Utiliser SSL/TLS pour la connexion."
-#, c-format
-msgid "    Sets default port to %d.\n"
-msgstr "    Définit le port par défaut à %d.\n"
-msgid "Use STARTTLS for the connection."
-msgstr "Utiliser STARTTLS pour la connexion."
-msgid "SMTP AUTH type to check (default none, only LOGIN supported)"
-msgstr ""
-msgid "SMTP AUTH username"
-msgstr ""
-msgid "SMTP AUTH password"
-msgstr ""
-msgid "Send LHLO instead of HELO/EHLO"
-msgstr ""
-msgid "Ignore failure when sending QUIT command to server"
-msgstr ""
-msgid "STATE_CRITICAL, other errors return STATE_UNKNOWN.  Successful"
-msgstr ""
-msgid "connects, but incorrect response messages from the host result in"
-msgstr ""
-msgid "STATE_WARNING return values."
-msgstr ""
-msgid "Cannot malloc"
-msgstr ""
-#, c-format
-msgid "External command error: %s\n"
-msgstr "Erreur d'exécution de commande externe: %s\n"
-#, c-format
-msgid "External command error with no output (return code: %d)\n"
-msgstr ""
-#, fuzzy, c-format
-msgid "No valid data returned (%s)\n"
-msgstr "Pas de données valides reçues"
-msgid "Time duration between plugin calls is invalid"
-msgstr ""
-msgid "Cannot asprintf()"
-msgstr ""
-#, fuzzy
-msgid "Cannot realloc()"
-msgstr "Impossible de réallouer des unités\n"
-msgid "No previous data to calculate rate - assume okay"
-msgstr ""
-msgid "Retries interval must be a positive integer"
-msgstr "L'intervalle pour les essais doit être un entier positif"
-#, fuzzy
-msgid "Exit status must be a positive integer"
-msgstr "Maxbytes doit être un entier positif"
-#, c-format
-msgid "Could not reallocate labels[%d]"
-msgstr "Impossible de réallouer des labels[%d]"
-msgid "Could not reallocate labels\n"
-msgstr "Impossible de réallouer des labels\n"
-#, c-format
-msgid "Could not reallocate units [%d]\n"
-msgstr "Impossible de réallouer des unités [%d]\n"
-msgid "Could not realloc() units\n"
-msgstr "Impossible de réallouer des unités\n"
-#, fuzzy
-msgid "Rate multiplier must be a positive integer"
-msgstr "La taille du paquet doit être un entier positif"
-msgid "No host specified\n"
-msgstr "Pas d'hôte spécifié\n"
-msgid "No OIDs specified\n"
-msgstr "Pas de compteur spécifié\n"
-#, c-format
-msgid "Required parameter: %s\n"
-msgstr ""
-msgid "Invalid seclevel"
-msgstr ""
-msgid "Invalid SNMP version"
-msgstr "Version de SNMP invalide"
-msgid "Unbalanced quotes\n"
-msgstr "Guillemets manquants\n"
-#, c-format
-msgid "multiplier set (%.1f), but input is not a number: %s"
-msgstr ""
-msgid "Check status of remote machines and obtain system information via SNMP"
-msgstr ""
-"Vérifie l'état des machines distantes et obtient l'information système via "
-"SNMP"
-msgid "Use SNMP GETNEXT instead of SNMP GET"
-msgstr "Utiliser SNMP GETNEXT au lieu de SNMP GET"
-msgid "SNMP protocol version"
-msgstr "Version du protocole SNMP"
-#, fuzzy
-msgid "SNMPv3 context"
-msgstr "Nom d'utilisateur SNMPv3"
-msgid "SNMPv3 securityLevel"
-msgstr "Niveau de sécurité SNMPv3 (securityLevel)"
-msgid "SNMPv3 auth proto"
-msgstr "Protocole d'authentification SNMPv3"
-msgid "SNMPv3 priv proto (default DES)"
-msgstr ""
-msgid "Optional community string for SNMP communication"
-msgstr "Communauté optionnelle pour la communication SNMP"
-msgid "default is"
-msgstr "défaut:"
-msgid "SNMPv3 username"
-msgstr "Nom d'utilisateur SNMPv3"
-msgid "SNMPv3 authentication password"
-msgstr "Mot de passe d'authentification SNMPv3"
-msgid "SNMPv3 privacy password"
-msgstr "Mot de passe de confidentialité SNMPv3"
-msgid "Object identifier(s) or SNMP variables whose value you wish to query"
-msgstr ""
-msgid ""
-"List of MIBS to be loaded (default = none if using numeric OIDs or 'ALL'"
-msgstr ""
-msgid "for symbolic OIDs.)"
-msgstr ""
-msgid "Delimiter to use when parsing returned data. Default is"
-msgstr ""
-msgid "Any data on the right hand side of the delimiter is considered"
-msgstr ""
-msgid "to be the data that should be used in the evaluation."
-msgstr ""
-msgid "If the check returns a 0 length string or NULL value"
-msgstr ""
-msgid "This option allows you to choose what status you want it to exit"
-msgstr ""
-msgid "Excluding this option renders the default exit of 3(STATE_UNKNOWN)"
-msgstr ""
-msgid "0 = OK"
-msgstr ""
-#, fuzzy
-msgid "1 = WARNING"
-msgstr "AVERTISSEMENT"
-#, fuzzy
-msgid "2 = CRITICAL"
-msgstr "CRITIQUE"
-#, fuzzy
-msgid "3 = UNKNOWN"
-msgstr "INCONNU"
-msgid "Warning threshold range(s)"
-msgstr "Valeurs pour le seuil d'avertissement"
-msgid "Critical threshold range(s)"
-msgstr "Valeurs pour le seuil critique"
-msgid "Enable rate calculation. See 'Rate Calculation' below"
-msgstr ""
-msgid ""
-"Converts rate per second. For example, set to 60 to convert to per minute"
-msgstr ""
-msgid "Add/subtract the specified OFFSET to numeric sensor data"
-msgstr ""
-msgid "Return OK state (for that OID) if STRING is an exact match"
-msgstr ""
-msgid ""
-"Return OK state (for that OID) if extended regular expression REGEX matches"
-msgstr ""
-msgid ""
-"Return OK state (for that OID) if case-insensitive extended REGEX matches"
-msgstr ""
-msgid "Invert search result (CRITICAL if found)"
-msgstr ""
-msgid "Prefix label for output from plugin"
-msgstr ""
-msgid "Units label(s) for output data (e.g., 'sec.')."
-msgstr ""
-msgid "Separates output on multiple OID requests"
-msgstr ""
-msgid "Multiplies current value, 0 < n < 1 works as divider, defaults to 1"
-msgstr ""
-msgid "C-style format string for float values (see option -M)"
-msgstr ""
-msgid ""
-"NOTE the final timeout value is calculated using this formula: "
-"timeout_interval * retries + 5"
-msgstr ""
-#, fuzzy
-msgid "Number of retries to be used in the requests, default: "
-msgstr "Le nombre d'essai pour les requêtes"
-msgid "Label performance data with OIDs instead of --label's"
-msgstr ""
-msgid "Tell snmpget to not print errors encountered when parsing MIB files"
-msgstr ""
-msgid ""
-"This plugin uses the 'snmpget' command included with the NET-SNMP package."
-msgstr ""
-msgid ""
-"if you don't have the package installed, you will need to download it from"
-msgstr ""
-"Si vous n'avez pas le programme installé, vous devrez le télécharger depuis"
-msgid "http://net-snmp.sourceforge.net before you can use this plugin."
-msgstr "http://net-snmp.sourceforge.net avant de pouvoir utiliser ce plugin."
-#, fuzzy
-msgid ""
-"- Multiple OIDs (and labels) may be indicated by a comma or space-delimited  "
-msgstr ""
-"- Des OIDs multiples peuvent être séparées par des virgules ou des espaces"
-#, fuzzy
-msgid "list (lists with internal spaces must be quoted)."
-msgstr "(Les liste avec espaces doivent être entre guillemets). Max:"
-msgid ""
-"- When checking multiple OIDs, separate ranges by commas like '-w "
-"1:10,1:,:20'"
-msgstr ""
-msgid "- Note that only one string and one regex may be checked at present"
-msgstr ""
-msgid ""
-"- All evaluation methods other than PR, STR, and SUBSTR expect that the value"
-msgstr ""
-msgid "returned from the SNMP query is an unsigned integer."
-msgstr ""
-msgid "Rate Calculation:"
-msgstr ""
-msgid "In many places, SNMP returns counters that are only meaningful when"
-msgstr ""
-msgid "calculating the counter difference since the last check. check_snmp"
-msgstr ""
-msgid "saves the last state information in a file so that the rate per second"
-msgstr ""
-msgid "can be calculated. Use the --rate option to save state information."
-msgstr ""
-msgid ""
-"On the first run, there will be no prior state - this will return with OK."
-msgstr ""
-msgid "The state is uniquely determined by the arguments to the plugin, so"
-msgstr ""
-msgid "changing the arguments will create a new state file."
-msgstr ""
-msgid "Port number must be a positive integer"
-msgstr "Le numéro du port doit être un nombre entier positif"
-#, c-format
-msgid "Server answer: %s"
-msgstr "Réponse du serveur: %s"
-#, fuzzy, c-format
-msgid "SSH CRITICAL - %s (protocol %s) version mismatch, expected '%s'\n"
-msgstr ""
-"SSH AVERTISSEMENT - %s (protocole %s) différence de version, attendu'%s'\n"
-#, fuzzy, c-format
-msgid ""
-"SSH CRITICAL - %s (protocol %s) protocol version mismatch, expected '%s'\n"
-msgstr ""
-"SSH AVERTISSEMENT - %s (protocole %s) différence de version, attendu'%s'\n"
-#, fuzzy, c-format
-msgid "SSH OK - %s (protocol %s) | %s\n"
-msgstr "SSH OK - %s (protocole %s)\n"
-msgid "Try to connect to an SSH server at specified server and port"
-msgstr "Essaye de se connecter à un serveur SSH précisé à un port précis"
-#, fuzzy
-msgid ""
-"Alert if string doesn't match expected server version (ex: OpenSSH_3.9p1)"
-msgstr ""
-"AVERTISSEMENT si la chaîne ne correspond pas à la version précisée (ex: "
-"OpenSSH_3.9p1)"
-#, fuzzy
-msgid "Alert if protocol doesn't match expected protocol version (ex: 2.0)"
-msgstr ""
-"AVERTISSEMENT si la chaîne ne correspond pas à la version précisée (ex: "
-"OpenSSH_3.9p1)"
-#, c-format
-msgid "Command: %s\n"
-msgstr "Commande: %s\n"
-#, c-format
-msgid "Format: %s\n"
-msgstr "Format: %s\n"
-#, c-format
-msgid "total=%.0f, used=%.0f, free=%.0f\n"
-msgstr "total=%.0f, utilisé=%.0f, libre=%.0ff\n"
-#, c-format
-msgid "total=%.0f, free=%.0f\n"
-msgstr "total=%.0f, libre=%.0f\n"
-msgid "Error getting swap devices\n"
-msgstr ""
-msgid "SWAP OK: No swap devices defined\n"
-msgstr "SWAP OK: Pas de périphériques swap définis\n"
-msgid "swapctl failed: "
-msgstr "swapctl à échoué:"
-msgid "Error in swapctl call\n"
-msgstr ""
-#, fuzzy, c-format
-msgid "SWAP %s - %d%% free (%dMB out of %dMB) %s|"
-msgstr "SWAP %s - %d%% libre (%d MB sur un total de %d MB) %s|"
-#, fuzzy
-msgid "Warning threshold percentage must be <= 100!"
-msgstr "Le seuil d'avertissement doit être un entier positif"
-#, fuzzy
-msgid "Warning threshold be positive integer or percentage!"
-msgstr "Le seuil d'avertissement doit être un entier ou un pourcentage!"
-#, fuzzy
-msgid "Critical threshold percentage must be <= 100!"
-msgstr "le seuil critique doit être un entier positif"
-#, fuzzy
-msgid "Critical threshold be positive integer or percentage!"
-msgstr "Le seuil critique doit être un entier ou un pourcentage!"
-#, fuzzy
-msgid ""
-"no-swap result must be a valid state name (OK, WARNING, CRITICAL, UNKNOWN) "
-"or integer (0-3)."
-msgstr ""
-"Le résultat de temps dépassé doit être un nom d'état valide (OK, WARNING, "
-"CRITICAL, UNKNOWN) ou un nombre entier (0-3)."
-#, fuzzy
-msgid "Warning should be more than critical"
-msgstr ""
-"Le pourcentage d'avertissement doit être plus important que le pourcentage "
-"critique"
-msgid "Check swap space on local machine."
-msgstr "Vérifie l'espace swap sur la machine locale."
-msgid ""
-"Exit with WARNING status if less than INTEGER bytes of swap space are free"
-msgstr ""
-"Sortir avec un résultat AVERTISSEMENT si moins de X octets de mémoire "
-"virtuelle sont libres"
-msgid "Exit with WARNING status if less than PERCENT of swap space is free"
-msgstr ""
-"Sortir avec un résultat AVERTISSEMENT si moins de X pour cent de mémoire "
-"virtuelle est libre"
-msgid ""
-"Exit with CRITICAL status if less than INTEGER bytes of swap space are free"
-msgstr ""
-"Sortir avec un résultat CRITIQUE si moins de X octets de mémoire virtuelle "
-"sont libres"
-msgid "Exit with CRITICAL status if less than PERCENT of swap space is free"
-msgstr ""
-"Sortir avec un résultat CRITIQUE si moins de X pour cent de mémoire "
-"virtuelle est libre"
-msgid "Conduct comparisons for all swap partitions, one by one"
-msgstr "Vérifier chacune des partitions de mémoire virtuelle séparément"
-msgid ""
-"Resulting state when there is no swap regardless of thresholds. Default:"
-msgstr ""
-#, fuzzy
-msgid ""
-"Both INTEGER and PERCENT thresholds can be specified, they are all checked."
-msgstr "Les seuils d'alerte et critiques peuvent être spécifiés avec -w et -c."
-msgid "On AIX, if -a is specified, uses lsps -a, otherwise uses lsps -s."
-msgstr ""
-"Sur AIX, si -a est spécifié, le plugin utilise lsps -a, sinon il utilise "
-"lsps -s."
-msgid "CRITICAL - Generic check_tcp called with unknown service\n"
-msgstr ""
-"CRITIQUE -check_tcp version générique utilisé avec un service inconnu\n"
-msgid "With UDP checks, a send/expect string must be specified."
-msgstr ""
-"Avec la surveillance UDP, une chaîne d'envoi et un chaîne de réponse doit "
-"être spécifiée."
-msgid "No arguments found"
-msgstr "Pas de paramètres"
-msgid "Maxbytes must be a positive integer"
-msgstr "Maxbytes doit être un entier positif"
-msgid "Refuse must be one of ok, warn, crit"
-msgstr "Refuse doit être parmis ok, warn, crit"
-msgid "Mismatch must be one of ok, warn, crit"
-msgstr "Mismatch doit être parmis ok, warn, crit"
-msgid "Delay must be a positive integer"
-msgstr "Delay doit être un entier positif"
-msgid "You must provide a server address"
-msgstr "Vous devez fournir une adresse serveur"
-msgid "Invalid hostname, address or socket"
-msgstr "Adresse/Nom/Socket invalide"
-#, c-format
-msgid ""
-"This plugin tests %s connections with the specified host (or unix socket).\n"
-"\n"
-msgstr ""
-"Ce plugin teste %s connections avec l'hôte spécifié (ou socket unix).\n"
-"\n"
-#, fuzzy
-msgid ""
-"Can use \\n, \\r, \\t or \\\\ in send or quit string. Must come before send "
-"or quit option"
-msgstr ""
-"Permet d'utiliser \\n, \\r, \\t ou \\ dans la chaîne de caractères send ou "
-"quit. Doit être placé avant ces dernières."
-msgid "Default: nothing added to send, \\r\\n added to end of quit"
-msgstr ""
-"Par défaut: Rien n'est ajouté à send, \\r\\n est ajouté à la fin de quit"
-msgid "String to send to the server"
-msgstr "Chaîne de caractères à envoyer au serveur"
-msgid "String to expect in server response"
-msgstr "Chaîne de caractères à attendre en réponse"
-msgid "(may be repeated)"
-msgstr "(peut être utilisé plusieurs fois)"
-msgid "All expect strings need to occur in server response. Default is any"
-msgstr ""
-"Toutes les chaînes attendus (expect) doivent être repérés dans la réponse. "
-"Par défaut, n'importe laquelle suffit."
-msgid "String to send server to initiate a clean close of the connection"
-msgstr "Chaîne de caractères à envoyer pour fermer gracieusement la connection"
-msgid "Accept TCP refusals with states ok, warn, crit (default: crit)"
-msgstr ""
-msgid ""
-"Accept expected string mismatches with states ok, warn, crit (default: warn)"
-msgstr ""
-msgid "Hide output from TCP socket"
-msgstr "Cacher la réponse provenant du socket TCP"
-msgid "Close connection once more than this number of bytes are received"
-msgstr ""
-msgid "Seconds to wait between sending string and polling for response"
-msgstr ""
-msgid "1st is #days for warning, 2nd is critical (if not specified - 0)."
-msgstr ""
-msgid "Use SSL for the connection."
-msgstr ""
-#, fuzzy
-msgid "SSL server_name"
-msgstr "Nom d'utilisateur SNMPv3"
-#, c-format
-msgid "TIME UNKNOWN - could not connect to server %s, port %d\n"
-msgstr "TEMPS INCONNU - impossible de se connecter au serveur %s, au port %d\n"
-#, c-format
-msgid "TIME UNKNOWN - could not send UDP request to server %s, port %d\n"
-msgstr ""
-"TEMPS INCONNU - impossible d'envoyer une requête UDP au serveur %s, au port "
-"%d\n"
-#, c-format
-msgid "TIME UNKNOWN - no data received from server %s, port %d\n"
-msgstr "TEMPS INCONNU - pas de données reçues du serveur %s, du port %d\n"
-#, c-format
-msgid "TIME %s - %d second response time|%s\n"
-msgstr "TEMPS %s - %d secondes de temps de réponse|%s\n"
-#, c-format
-msgid "TIME %s - %lu second time difference|%s %s\n"
-msgstr "TEMPS %s - %lu secondes de différence|%s %s\n"
-msgid "Warning thresholds must be a positive integer"
-msgstr "Les seuils d'avertissement doivent être un entier positif"
-msgid "Critical thresholds must be a positive integer"
-msgstr "Les seuils critiques doivent être un entier positif"
-msgid "This plugin will check the time on the specified host."
-msgstr "Ce plugin va vérifier l'heure sur l'hôte spécifié."
-msgid "Use UDP to connect, not TCP"
-msgstr ""
-msgid "Time difference (sec.) necessary to result in a warning status"
-msgstr ""
-msgid "Time difference (sec.) necessary to result in a critical status"
-msgstr ""
-msgid "Response time (sec.) necessary to result in warning status"
-msgstr ""
-msgid "Response time (sec.) necessary to result in critical status"
-msgstr ""
-msgid "On Battery, Low Battery"
-msgstr "Sur Batterie, Batterie faible"
-msgid "Online"
-msgstr "En marche"
-msgid "On Battery"
-msgstr "Sur Batterie"
-msgid ", Low Battery"
-msgstr ", Batterie faible"
-msgid ", Calibrating"
-msgstr ", Calibration"
-msgid ", Replace Battery"
-msgstr ", Remplacer la batterie"
-msgid ", On Bypass"
-msgstr ", Sur Secteur"
-msgid ", Overload"
-msgstr ", Surcharge"
-msgid ", Trimming"
-msgstr ", En Test"
-msgid ", Boosting"
-msgstr ""
-msgid ", Charging"
-msgstr ", En charge"
-msgid ", Discharging"
-msgstr ", Déchargement"
-msgid ", Unknown"
-msgstr ", Inconnu"
-msgid "UPS does not support any available options\n"
-msgstr "L'UPS ne supporte aucune des options disponibles\n"
-msgid "Invalid response received from host"
-msgstr "Réponse invalide reçue de l'hôte"
-msgid "UPS name to long for buffer"
-msgstr ""
-#, c-format
-msgid "CRITICAL - no such UPS '%s' on that host\n"
-msgstr "CRITIQUE - pas d'UPS '%s' sur cet hôte\n"
-msgid "CRITICAL - UPS data is stale"
-msgstr "CRITIQUE - les données de l'ups ne sont plus valables"
-#, c-format
-msgid "Unknown error: %s\n"
-msgstr "Erreur inconnue: %s\n"
-msgid "Error: unable to parse variable"
-msgstr "Erreur: impossible de lire la variable"
-msgid "Unrecognized UPS variable"
-msgstr "Variable d'UPS non reconnue"
-msgid "Error : no UPS indicated"
-msgstr "Erreur: pas d'UPS indiqué"
-msgid ""
-"This plugin tests the UPS service on the specified host. Network UPS Tools"
-msgstr "Ce plugin teste le service UPS sur l'hôte spécifié. Network UPS Tools"
-msgid "from www.networkupstools.org must be running for this plugin to work."
-msgstr ""
-"de www.networkupstools.org doit s'exécuter sur l'hôte pour que ce plugin "
-"fonctionne."
-msgid "Name of UPS"
-msgstr ""
-msgid "Output of temperatures in Celsius"
-msgstr "Affichage des températures en Celsius"
-msgid "Valid values for STRING are"
-msgstr "Les variables valides pour STRING sont"
-msgid ""
-"This plugin attempts to determine the status of a UPS (Uninterruptible Power"
-msgstr ""
-msgid ""
-"Supply) on a local or remote host. If the UPS is online or calibrating, the"
-msgstr ""
-msgid ""
-"plugin will return an OK state. If the battery is on it will return a WARNING"
-msgstr ""
-msgid ""
-"state. If the UPS is off or has a low battery the plugin will return a "
-"CRITICAL"
-msgstr ""
-msgid ""
-"You may also specify a variable to check (such as temperature, utility "
-"voltage,"
-msgstr ""
-msgid ""
-"battery load, etc.) as well as warning and critical thresholds for the value"
-msgstr ""
-msgid ""
-"of that variable.  If the remote host has multiple UPS that are being "
-"monitored"
-msgstr ""
-msgid "you will have to use the --ups option to specify which UPS to check."
-msgstr ""
-msgid ""
-"This plugin requires that the UPSD daemon distributed with Russell Kroll's"
-msgstr ""
-msgid ""
-"Network UPS Tools be installed on the remote host. If you do not have the"
-msgstr ""
-msgid "package installed on your system, you can download it from"
-msgstr ""
-msgid "http://www.networkupstools.org"
-msgstr ""
-#, fuzzy, c-format
-msgid "Could not enumerate RD sessions: %d\n"
-msgstr "Impossible d'utiliser le protocole version %d\n"
-#, c-format
-msgid "# users=%d"
-msgstr "# utilisateurs=%d"
-msgid "Unable to read output"
-msgstr "Impossible de lire les données en entrée"
-#, c-format
-msgid "USERS %s - %d users currently logged in |%s\n"
-msgstr "UTILISATEURS %s - %d utilisateurs actuellement connectés sur |%s\n"
-msgid "This plugin checks the number of users currently logged in on the local"
-msgstr ""
-"Ce plugin vérifie le nombre d'utilisateurs actuellement connecté sur le "
-"système local"
-msgid ""
-"system and generates an error if the number exceeds the thresholds specified."
-msgstr "et génère une erreur si le nombre excède le seuil spécifié."
-msgid "Set WARNING status if more than INTEGER users are logged in"
-msgstr ""
-"Sortir avec un résultat AVERTISSEMENT si plus de INTEGER utilisateurs sont "
-"connectés"
-msgid "Set CRITICAL status if more than INTEGER users are logged in"
-msgstr ""
-"Sortir avec un résultat CRITIQUE si plus de INTEGER utilisateurs sont "
-"connectés"
-msgid ""
-"DEPRECATION WARNING: the -q switch (quiet output) is no longer \"quiet\"."
-msgstr ""
-msgid "Nagios-compatible output is now always returned."
-msgstr ""
-msgid "SMART commands are broken and have been disabled (See Notes in --help)."
-msgstr ""
-msgid ""
-"DEPRECATION WARNING: the -n switch (Nagios-compatible output) is now the"
-msgstr ""
-#, fuzzy
-msgid "default and will be removed from future releases."
-msgstr ""
-"Note: nslookup est obsolète et pourra être retiré dans les prochaines "
-"versions."
-#, c-format
-msgid "CRITICAL - Couldn't open device %s: %s\n"
-msgstr "Critique - Impossible d'ouvrir le périphérique %s: %s\n"
-#, c-format
-msgid "CRITICAL - SMART_CMD_ENABLE\n"
-msgstr "CRITIQUE - SMART_CMD_ENABLE\n"
-#, c-format
-msgid "CRITICAL - SMART_READ_VALUES: %s\n"
-msgstr "CRITIQUE - SMART_READ_VALUES: %s\n"
-#, c-format
-msgid "CRITICAL - %d Harddrive PreFailure%cDetected! %d/%d tests failed.\n"
-msgstr ""
-"CRITIQUE - %d État de pré-panne %c Détecté! %d/%d les tests on échoués.\n"
-#, c-format
-msgid "WARNING - %d Harddrive Advisor%s Detected. %d/%d tests failed.\n"
-msgstr ""
-"AVERTISSEMENT -  %d État de pré-panne %s Détecté! %d/%d les tests on "
-"échoués.\n"
-#, c-format
-msgid "OK - Operational (%d/%d tests passed)\n"
-msgstr "OK - En fonctionnement (%d/%d les tests on été réussi)\n"
-#, c-format
-msgid "ERROR - Status '%d' unknown. %d/%d tests passed\n"
-msgstr "ERREUR - État '%d' inconnu. %d/%d les tests on réussi\n"
-#, c-format
-msgid "OffLineStatus=%d {%s}, AutoOffLine=%s, OffLineTimeout=%d minutes\n"
-msgstr ""
-"Etat Hors Ligne=%d {%s}, Hors Ligne Auto=%s, Temps avant arrêt=%d minutes\n"
-#, c-format
-msgid "OffLineCapability=%d {%s %s %s}\n"
-msgstr "Capacité Hors Ligne=%d {%s %s %s}\n"
-#, c-format
-msgid "SmartRevision=%d, CheckSum=%d, SmartCapability=%d {%s %s}\n"
-msgstr "Révision Smart=%d, Somme de contrôle=%d, Capacité Smart=%d {%s %s}\n"
-#, c-format
-msgid "CRITICAL - %s: %s\n"
-msgstr "CRITIQUE - %s: %s\n"
-#, fuzzy, c-format
-msgid "OK - Command sent (%s)\n"
-msgstr "Commande: %s\n"
-#, c-format
-msgid "CRITICAL - SMART_READ_THRESHOLDS: %s\n"
-msgstr "CRITIQUE - SMART_READ_THRESHOLDS: %s\n"
-#, c-format
-msgid ""
-"This plugin checks a local hard drive with the (Linux specific) SMART "
-"interface [http://smartlinux.sourceforge.net/smart/index.php]."
-msgstr ""
-"Ce plugin vérifie un disque dur local à l'aide de l'interface SMART (pour "
-"Linux) [http://smartlinux.sourceforge.net/smart/index.php]."
-msgid "Select device DEVICE"
-msgstr ""
-msgid ""
-"Note: if the device is specified without this option, any further option will"
-msgstr ""
-msgid "be ignored."
-msgstr ""
-msgid ""
-"The SMART command modes (-i/--immediate, -0/--auto-off and -1/--auto-on) were"
-msgstr ""
-msgid ""
-"broken in an underhand manner and have been disabled. You can use smartctl"
-msgstr ""
-msgid "instead:"
-msgstr ""
-msgid "-0/--auto-off:  use \"smartctl --offlineauto=off\""
-msgstr ""
-msgid "-1/--auto-on:   use \"smartctl --offlineauto=on\""
-msgstr ""
-msgid "-i/--immediate: use \"smartctl --test=offline\""
-msgstr ""
-msgid "No data returned from command\n"
-msgstr "Pas de données reçues de la commande\n"
-msgid ""
-"Timeout result must be a valid state name (OK, WARNING, CRITICAL, UNKNOWN) "
-"or integer (0-3)."
-msgstr ""
-"Le résultat de temps dépassé doit être un nom d'état valide (OK, WARNING, "
-"CRITICAL, UNKNOWN) ou un nombre entier (0-3)."
-msgid ""
-"Ok must be a valid state name (OK, WARNING, CRITICAL, UNKNOWN) or integer "
-"(0-3)."
-msgstr ""
-"Ok doit être un nom d'état valide (OK, WARNING, CRITICAL, UNKNOWN) ou un "
-"nombre entier (0-3)."
-msgid ""
-"Warning must be a valid state name (OK, WARNING, CRITICAL, UNKNOWN) or "
-"integer (0-3)."
-msgstr ""
-"Warning doit être un nom d'état valide (OK, WARNING, CRITICAL, UNKNOWN) ou "
-"un nombre entier (0-3)."
-msgid ""
-"Critical must be a valid state name (OK, WARNING, CRITICAL, UNKNOWN) or "
-"integer (0-3)."
-msgstr ""
-"Critical doit être un nom d'état valide (OK, WARNING, CRITICAL, UNKNOWN) ou "
-"un nombre entier (0-3)."
-msgid ""
-"Unknown must be a valid state name (OK, WARNING, CRITICAL, UNKNOWN) or "
-"integer (0-3)."
-msgstr ""
-"Unknown doit être un nom d'état valide (OK, WARNING, CRITICAL, UNKNOWN) ou "
-"un nombre entier (0-3)."
-msgid "Require path to command"
-msgstr "Chemin vers la commande requis"
-msgid ""
-"Negates the status of a plugin (returns OK for CRITICAL and vice-versa)."
-msgstr ""
-"Inverse le statut d'un plugin (retourne OK pour CRITIQUE et vice-versa)."
-msgid "Additional switches can be used to control which state becomes what."
-msgstr ""
-"Des options additionnelles peuvent être utilisées pour contrôler quel état "
-"devient quoi."
-msgid "Keep timeout longer than the plugin timeout to retain CRITICAL status."
-msgstr ""
-"Utilisez un délai de réponse plus long que celui du plugin afin de conserver "
-"les résultats CRITIQUE"
-msgid "Custom result on Negate timeouts; see below for STATUS definition\n"
-msgstr ""
-#, c-format
-msgid ""
-"    STATUS can be 'OK', 'WARNING', 'CRITICAL' or 'UNKNOWN' without single\n"
-msgstr ""
-"    STATUS peut être 'OK', 'WARNING', 'CRITICAL' ou 'UNKNOWN' sans les "
-"simple\n"
-#, c-format
-msgid ""
-"    quotes. Numeric values are accepted. If nothing is specified, permutes\n"
-msgstr "    quotes. Les valeurs numériques sont acceptées. Si rien n'est\n"
-#, c-format
-msgid "    OK and CRITICAL.\n"
-msgstr "    spécifié, inverse OK et CRITIQUE.\n"
-#, c-format
-msgid ""
-"    Substitute output text as well. Will only substitute text in CAPITALS\n"
-msgstr ""
-msgid "Run check_ping and invert result. Must use full path to plugin"
-msgstr ""
-"Execute check_ping et inverse le résultat. Le chemin complet du plug-in doit "
-"être spécifié"
-msgid "This will return OK instead of WARNING and UNKNOWN instead of CRITICAL"
-msgstr ""
-"Ceci retournera OK au lieu de AVERTISSEMENT et INCONNU au lieu de CRITIQUE"
-msgid ""
-"This plugin is a wrapper to take the output of another plugin and invert it."
-msgstr ""
-"Ce plugin est un adaptateur qui prends l'état d'un autre plug-in et "
-"l'inverse."
-msgid "The full path of the plugin must be provided."
-msgstr "Le chemin complet du plugin doit être spécifié."
-msgid "If the wrapped plugin returns OK, the wrapper will return CRITICAL."
-msgstr "Si le plugin executé retourne OK, l'adaptateur retournera CRITIQUE."
-msgid "If the wrapped plugin returns CRITICAL, the wrapper will return OK."
-msgstr "Si le plugin executé retourne CRITIQUE, l'adaptateur retournera OK."
-msgid "Otherwise, the output state of the wrapped plugin is unchanged."
-msgstr "Autrement, l'état du plugin executé reste inchangé."
-msgid ""
-"Using timeout-result, it is possible to override the timeout behaviour or a"
-msgstr ""
-msgid "plugin by setting the negate timeout a bit lower."
-msgstr ""
-#, c-format
-msgid "%s - Socket timeout after %d seconds\n"
-msgstr "%s - Le socket n'a pas répondu dans les %d secondes\n"
-#, c-format
-msgid "%s - Abnormal timeout after %d seconds\n"
-msgstr "%s - Dépassement anormal du temps de réponse après %d secondes\n"
-msgid "Send failed"
-msgstr "L'envoi à échoué"
-msgid "No data was received from host!"
-msgstr "Pas de données reçues de l'hôte!"
-msgid "Socket creation failed"
-msgstr "La création du socket à échoué "
-msgid "Supplied path too long unix domain socket"
-msgstr "Le chemin fourni est trop long pour un socket unix"
-msgid "Receive failed"
-msgstr "La réception à échoué"
-#, c-format
-msgid "Invalid hostname/address - %s"
-msgstr "Adresse/Nom invalide - %s"
-msgid "Could not malloc argv array in popen()"
-msgstr "Impossible de réallouer un tableau pour les paramètres dans popen()"
-msgid "CRITICAL - You need more args!!!"
-msgstr "CRITIQUE - Vous devez spécifier plus d'arguments!!!"
-msgid "Cannot catch SIGCHLD"
-msgstr "impossible d'obtenir le signal SIGCHLD"
-#, c-format
-msgid "CRITICAL - Plugin timed out after %d seconds\n"
-msgstr "CRITIQUE - Le plugin n'as pas répondu dans les %d secondes\n"
-msgid "CRITICAL - popen timeout received, but no child process"
-msgstr ""
-"CRITIQUE - le temps d'attente à été dépassé dans la fonction popen, mais il "
-"n'y a pas de processus fils"
-#, c-format
-msgid ""
-"%s UNKNOWN - No data received from host\n"
-"CMD: %s</A>\n"
-msgstr ""
-"%s INCONNU - Pas de données reçues de l'hôte\n"
-"Commande: %s</A>\n"
-#, fuzzy
-msgid ""
-"This plugin wraps the text output of another command (plugin) in HTML <A>"
-msgstr ""
-"Ce plugin est un adaptateur qui prends l'état d'un autre plug-in et "
-"l'inverse."
-msgid ""
-"tags, thus displaying the child plugin's output as a clickable link in "
-"compatible"
-msgstr ""
-msgid ""
-"monitoring status screen. This plugin returns the status of the invoked "
-"plugin."
-msgstr ""
-msgid ""
-"Pay close attention to quoting to ensure that the shell passes the expected"
-msgstr ""
-msgid "data to the plugin. For example, in:"
-msgstr ""
-msgid "urlize http://example.com/ check_http -H example.com -r 'two words'"
-msgstr ""
-msgid "the shell will remove the single quotes and urlize will see:"
-msgstr ""
-msgid "urlize http://example.com/ check_http -H example.com -r two words"
-msgstr ""
-msgid "You probably want:"
-msgstr ""
-msgid "urlize http://example.com/ \"check_http -H example.com -r 'two words'\""
-msgstr ""
-msgid "failed realloc in strpcpy\n"
-msgstr "La fonction realloc à échoué dans strpcpy\n"
-msgid "failed malloc in strscat\n"
-msgstr "La fonction malloc à échoué dans strscat\n"
-#, fuzzy
-msgid "failed malloc in xvasprintf\n"
-msgstr "La fonction malloc à échoué dans strscat\n"
-#, c-format
-msgid ""
-"       %s (-h | --help) for detailed help\n"
-"       %s (-V | --version) for version information\n"
-msgstr ""
-"       %s (-h | --help) pour l'aide détaillée\n"
-"       %s (-V | --version) pour les informations relative à la version\n"
-msgid ""
-"\n"
-"Options:\n"
-" -h, --help\n"
-"    Print detailed help screen\n"
-" -V, --version\n"
-"    Print version information\n"
-msgstr ""
-"\n"
-"Options:\n"
-" -h, --help\n"
-"    Afficher l'aide détaillée\n"
-" -V, --version\n"
-"    Afficher les informations relative à la version\n"
-#, c-format
-msgid ""
-" -H, --hostname=ADDRESS\n"
-"    Host name, IP Address, or unix socket (must be an absolute path)\n"
-" -%c, --port=INTEGER\n"
-"    Port number (default: %s)\n"
-msgstr ""
-" -H, --hostname=ADDRESS\n"
-"    Nom d'hôte, Adresse IP, ou socket UNIX (doit être un chemin absolu)\n"
-" -%c, --port=INTEGER\n"
-"    Numéro de port (défaut: %s)\n"
-msgid ""
-" -4, --use-ipv4\n"
-"    Use IPv4 connection\n"
-" -6, --use-ipv6\n"
-"    Use IPv6 connection\n"
-msgstr ""
-" -4, --use-ipv4\n"
-"    Utiliser une connection IPv4\n"
-" -6, --use-ipv6\n"
-"    Utiliser une connection IPv6\n"
-#, fuzzy
-msgid ""
-" -v, --verbose\n"
-"    Show details for command-line debugging (output may be truncated by\n"
-"    the monitoring system)\n"
-msgstr ""
-" -v, --verbose\n"
-"    Affiche les informations de déboguage en ligne de commande (Nagios peut "
-"tronquer la sortie)\n"
-msgid ""
-" -w, --warning=DOUBLE\n"
-"    Response time to result in warning status (seconds)\n"
-" -c, --critical=DOUBLE\n"
-"    Response time to result in critical status (seconds)\n"
-msgstr ""
-" -w, --warning=DOUBLE\n"
-"    Temps de réponse résultant en un état d'avertissement (secondes)\n"
-" -c, --critical=DOUBLE\n"
-"    Temps de réponse résultant en un état critique (secondes)\n"
-msgid ""
-" -w, --warning=RANGE\n"
-"    Warning range (format: start:end). Alert if outside this range\n"
-" -c, --critical=RANGE\n"
-"    Critical range\n"
-msgstr ""
-" -w, --warning=RANGE\n"
-"    Seuil d'avertissement (format: début:fin). Alerte à l'extérieur de la "
-"plage\n"
-" -c, --critical=RANGE\n"
-"    Seuil critique\n"
-#, c-format
-msgid ""
-" -t, --timeout=INTEGER\n"
-"    Seconds before connection times out (default: %d)\n"
-msgstr ""
-" -t, --timeout=INTEGER\n"
-"    Délais de connection en secondes (défaut: %d)\n"
-#, fuzzy, c-format
-msgid ""
-" -t, --timeout=INTEGER\n"
-"    Seconds before plugin times out (default: %d)\n"
-msgstr ""
-" -t, --timeout=INTEGER\n"
-"    Délais de connection en secondes (défaut: %d)\n"
-#, fuzzy
-msgid ""
-" --extra-opts=[section][@file]\n"
-"    Read options from an ini file. See\n"
-"    https://www.monitoring-plugins.org/doc/extra-opts.html\n"
-"    for usage and examples.\n"
-msgstr ""
-" --extra-opts=[section][@file]\n"
-"    Lire les options d'un fichier ini. Voir\n"
-"    https://www.monitoring-plugins.org/doc/extra-opts.html\n"
-"    pour les instructions et examples.\n"
-#, fuzzy
-msgid ""
-" See:\n"
-" https://www.monitoring-plugins.org/doc/guidelines.html#THRESHOLDFORMAT\n"
-" for THRESHOLD format and examples.\n"
-msgstr ""
-" Voir:\n"
-" https://www.monitoring-plugins.org/doc/guidelines.html."
-"html#THRESHOLDFORMAT\n"
-" pour le format et examples des seuils (THRESHOLD).\n"
-#, fuzzy
-msgid ""
-"\n"
-"Send email to help@monitoring-plugins.org if you have questions regarding\n"
-"use of this software. To submit patches or suggest improvements, send email\n"
-"to devel@monitoring-plugins.org\n"
-"\n"
-msgstr ""
-"\n"
-"Envoyez un email à help@monitoring-plugins.org si vous avez des questions\n"
-"reliées à l'utilisation de ce logiciel. Pour envoyer des patches ou suggérer "
-"des\n"
-"améliorations, envoyez un email à devel@monitoring-plugins.org\n"
-"\n"
-#, fuzzy
-msgid ""
-"\n"
-"The Monitoring Plugins come with ABSOLUTELY NO WARRANTY. You may "
-"redistribute\n"
-"copies of the plugins under the terms of the GNU General Public License.\n"
-"For more information about these matters, see the file named COPYING.\n"
-msgstr ""
-"\n"
-"Les plugins de Nagios ne portent AUCUNE GARANTIE. Vous pouvez redistribuer\n"
-"des copies des plugins selon les termes de la GNU General Public License.\n"
-"Pour de plus ample informations, voir le fichier COPYING.\n"
-#, c-format
-msgid "Error: Could not get hardware address of interface '%s'\n"
-msgstr ""
-"Erreur: Impossible d'obtenir l'adresse matérielle pour l'interface '%s'\n"
-#, c-format
-msgid "Error: if_nametoindex error - %s.\n"
-msgstr "Erreur: if_nametoindex erreur - %s.\n"
-#, c-format
-msgid "Error: Couldn't get hardware address from %s. sysctl 1 error - %s.\n"
-msgstr ""
-"Erreur: Impossible d'obtenir l'adresse matérielle depuis %s. erreur sysctl 1 "
-"- %s.\n"
-#, c-format
-msgid ""
-"Error: Couldn't get hardware address from interface %s. malloc error - %s.\n"
-msgstr ""
-"Erreur: Impossible d'obtenir l'adresse matérielle depuis l'interface %s\n"
-" erreur malloc - %s.\n"
-#, c-format
-msgid "Error: Couldn't get hardware address from %s. sysctl 2 error - %s.\n"
-msgstr ""
-"Erreur: Impossible d'obtenir l'adresse matérielle depuis %s erreur sysctl 2 "
-"- %s.\n"
-#, c-format
-msgid ""
-"Error: can't find unit number in interface_name (%s) - expecting TypeNumber "
-"eg lnc0.\n"
-msgstr ""
-"Erreur: impossible de trouver le numéro dans le nom de l'interface (%s).\n"
-"J'attendais le nom suivi du type ex lnc0.\n"
-#, c-format
-msgid ""
-"Error: can't read MAC address from DLPI streams interface for device %s unit "
-"%d.\n"
-msgstr ""
-"Erreur: impossible de lire l'adresse MAC depuis l'interface DLPI pour le \n"
-"périphérique %s numéro %d.\n"
-#, c-format
-msgid ""
-"Error: can't get MAC address for this architecture.  Use the --mac option.\n"
-msgstr ""
-"Erreur: impossible d'obtenir l'adresse MAC sur cette architecture.  Utilisez "
-"l'option --mac.\n"
-#, c-format
-msgid "Error: Cannot determine IP address of interface %s\n"
-msgstr "Erreur: Impossible d'obtenir l'adresse IP de l'interface %s\n"
-#, c-format
-msgid "Error: Cannot get interface IP address on this platform.\n"
-msgstr "Erreur: Impossible d'obtenir l'adresse IP sur cette architecture.\n"
-#, c-format
-msgid "Pretending to be relay client %s\n"
-msgstr ""
-#, c-format
-msgid "DHCPDISCOVER to %s port %d\n"
-msgstr "DHCPDISCOVER vers %s port %d\n"
-#, c-format
-msgid "Result=ERROR\n"
-msgstr "Résultat=ERREUR\n"
-#, c-format
-msgid "Result=OK\n"
-msgstr "Résultat=OK\n"
-#, c-format
-msgid "DHCPOFFER from IP address %s"
-msgstr "DHCPOFFER depuis l'adresse IP %s"
-#, c-format
-msgid " via %s\n"
-msgstr " depuis %s\n"
-#, c-format
-msgid ""
-"DHCPOFFER XID (%u) did not match DHCPDISCOVER XID (%u) - ignoring packet\n"
-msgstr ""
-"DHCPOFFER XID (%u) ne correspond pas au DHCPDISCOVER XID (%u) - paquet "
-"ignoré\n"
-#, c-format
-msgid "DHCPOFFER hardware address did not match our own - ignoring packet\n"
-msgstr ""
-"l'adresse matérielle du DHCPOFFER ne correspond pas à la notre paquet "
-"ignoré\n"
-#, c-format
-msgid "Total responses seen on the wire: %d\n"
-msgstr "Nombre total de réponses vues: %d\n"
-#, c-format
-msgid "Valid responses for this machine: %d\n"
-msgstr "Nombre de réponse valides pour cette machine: %d\n"
-#, c-format
-msgid "send_dhcp_packet result: %d\n"
-msgstr "résultat de send_dchp_packet: %d\n"
-#, c-format
-msgid "No (more) data received (nfound: %d)\n"
-msgstr "Plus de données reçues (nfound: %d)\n"
-#, c-format
-msgid "recvfrom() failed, "
-msgstr "recvfrom() a échoué, "
-#, c-format
-msgid "receive_dhcp_packet() result: %d\n"
-msgstr "résultat de receive_dchp_packet(): %d\n"
-#, c-format
-msgid "receive_dhcp_packet() source: %s\n"
-msgstr "source de receive_dchp_packet(): %s\n"
-#, c-format
-msgid "Error: Could not create socket!\n"
-msgstr "Erreur: Impossible de créer un socket!\n"
-#, c-format
-msgid "Error: Could not set reuse address option on DHCP socket!\n"
-msgstr ""
-"Erreur: Impossible de configurer l'option de réutilisation de l'adresse sur\n"
-"le socket DHCP!\n"
-#, c-format
-msgid "Error: Could not set broadcast option on DHCP socket!\n"
-msgstr ""
-"Erreur: Impossible de configurer l'option broadcast sur le socket DHCP!\n"
-#, c-format
-msgid ""
-"Error: Could not bind socket to interface %s.  Check your privileges...\n"
-msgstr ""
-"Erreur: Impossible de connecter le socket à l'interface %s.\n"
-"Vérifiez vos droits...\n"
-#, c-format
-msgid ""
-"Error: Could not bind to DHCP socket (port %d)!  Check your privileges...\n"
-msgstr ""
-"Erreur: Impossible de se connecter au socket (port %d)!  Vérifiez vos "
-"droits..\n"
-#, c-format
-msgid "Requested server address: %s\n"
-msgstr "Adresse serveur demandée: %s\n"
-#, c-format
-msgid "Lease Time: Infinite\n"
-msgstr "Durée du Bail: Infini\n"
-#, c-format
-msgid "Lease Time: %lu seconds\n"
-msgstr "Durée du Bail: %lu secondes\n"
-#, c-format
-msgid "Renewal Time: Infinite\n"
-msgstr "Renouvellement du bail: Infini\n"
-#, c-format
-msgid "Renewal Time: %lu seconds\n"
-msgstr "Durée du renouvellement = %lu secondes\n"
-#, c-format
-msgid "Rebinding Time: Infinite\n"
-msgstr "Délai de nouvelle demande: Infini\n"
-#, c-format
-msgid "Rebinding Time: %lu seconds\n"
-msgstr "Délai de nouvelle demande: %lu secondes\n"
-#, c-format
-msgid "Added offer from server @ %s"
-msgstr "Rajouté offre du serveur @ %s"
-#, c-format
-msgid " of IP address %s\n"
-msgstr "de l'adresse IP %s\n"
-#, c-format
-msgid "DHCP Server Match: Offerer=%s"
-msgstr "Correspondance du serveur DHCP: Offrant=%s"
-#, c-format
-msgid " Requested=%s"
-msgstr " Demandé=%s"
-#, c-format
-msgid " (duplicate)"
-msgstr ""
-#, c-format
-msgid "\n"
-msgstr ""
-#, c-format
-msgid "No DHCPOFFERs were received.\n"
-msgstr "Pas de DHCPOFFERs reçus.\n"
-#, c-format
-msgid "Received %d DHCPOFFER(s)"
-msgstr "Reçu %d DHCPOFFER(s)"
-#, c-format
-msgid ", %s%d of %d requested servers responded"
-msgstr ", %s%d de %d serveurs ont répondus"
-#, c-format
-msgid ", requested address (%s) was %soffered"
-msgstr ", l'adresse demandée (%s) %s été offerte"
-#, c-format
-msgid ", max lease time = "
-msgstr ", bail maximum = "
-#, c-format
-msgid "Infinity"
-msgstr "Infini"
-#, c-format
-msgid "Error: DLPI stream API failed to get MAC in check_ctrl: %s.\n"
-msgstr ""
-"Erreur: Impossible d'obtenir la MAC par l'API DLPI dans check_ctrl: %s.\n"
-#, c-format
-msgid "Error: DLPI stream API failed to get MAC in put_ctrl/putmsg(): %s.\n"
-msgstr ""
-"Erreur: Impossible d'obtenir la MAC par l'API DLPI dans put_ctrl/putmsg(): "
-"%s.\n"
-#, c-format
-msgid "Error: DLPI stream API failed to get MAC in put_both/putmsg().\n"
-msgstr ""
-"Erreur: Impossible d'obtenir la MAC par l'API DLPI dans put_both/putmsg().\n"
-#, c-format
-msgid ""
-"Error: DLPI stream API failed to get MAC in dl_attach_req/open(%s..): %s.\n"
-msgstr ""
-"Erreur: Impossible d'obtenir la MAC par l'API DLPI dans dl_attach_req/"
-"open(%s..): %s.\n"
-#, c-format
-msgid "Error: DLPI stream API failed to get MAC in dl_bind/check_ctrl(): %s.\n"
-msgstr ""
-"Erreur: Impossible d'obtenir la MAC par l'API DLPI dans dl_bind/"
-"check_ctrl(): %s.\n"
-#, c-format
-msgid "Hardware address: "
-msgstr "Adresse matérielle: "
-msgid "This plugin tests the availability of DHCP servers on a network."
-msgstr "Ce plugin teste la disponibilité de serveurs DHCP dans un réseau."
-msgid "IP address of DHCP server that we must hear from"
-msgstr ""
-msgid "IP address that should be offered by at least one DHCP server"
-msgstr ""
-msgid "Seconds to wait for DHCPOFFER before timeout occurs"
-msgstr ""
-msgid "Interface to to use for listening (i.e. eth0)"
-msgstr ""
-msgid "MAC address to use in the DHCP request"
-msgstr ""
-msgid "Unicast testing: mimic a DHCP relay, requires -s"
-msgstr ""
-msgid "specify a target"
-msgstr ""
-msgid "Use IPv4 (default) or IPv6 to communicate with the targets"
-msgstr ""
-msgid "warning threshold (currently "
-msgstr "Valeurs pour le seuil d'avertissement (actuellement "
-msgid "critical threshold (currently "
-msgstr "Valeurs pour le seuil critique (actuellement "
-msgid ""
-"RTA, round trip average,  mode  warning,critical, ex. 100ms,200ms unit in ms"
-msgstr ""
-msgid "packet loss mode, ex. 40%,50% , unit in %"
-msgstr ""
-msgid "jitter mode  warning,critical, ex. 40.000ms,50.000ms , unit in ms "
-msgstr ""
-msgid "MOS mode, between 0 and 4.4  warning,critical, ex. 3.5,3.0"
-msgstr ""
-msgid "score  mode, max value 100  warning,critical, ex. 80,70 "
-msgstr ""
-msgid "detect out of order ICMP packts "
-msgstr ""
-msgid "specify a source IP address or device name"
-msgstr "spécifiez une adresse ou un nom d'hôte"
-msgid "number of packets to send (currently "
-msgstr "nombre de paquets à envoyer (actuellement "
-msgid "max packet interval (currently "
-msgstr ""
-msgid "max target interval (currently "
-msgstr ""
-msgid "number of alive hosts required for success"
-msgstr "nombre d'hôtes vivants requis pour réussite"
-msgid "TTL on outgoing packets (currently "
-msgstr ""
-msgid "timeout value (seconds, currently  "
-msgstr ""
-msgid "Number of icmp data bytes to send"
-msgstr "Nombre de paquets ICMP à envoyer"
-msgid "Packet size will be data bytes + icmp header (currently"
-msgstr ""
-msgid "verbose"
-msgstr ""
-msgid "If none of R,P,J,M,S or O is specified, default behavior is -R -P"
-msgstr ""
-msgid "The -H switch is optional. Naming a host (or several) to check is not."
-msgstr ""
-msgid ""
-"Threshold format for -w and -c is 200.25,60% for 200.25 msec RTA and 60%"
-msgstr ""
-msgid "packet loss.  The default values should work well for most users."
-msgstr ""
-msgid ""
-"You can specify different RTA factors using the standardized abbreviations"
-msgstr ""
-msgid ""
-"us (microseconds), ms (milliseconds, default) or just plain s for seconds."
-msgstr ""
-msgid "The -v switch can be specified several times for increased verbosity."
-msgstr ""
-#, fuzzy
-#~ msgid "Check only filesystems of indicated type (may be repeated)"
-#~ msgstr ""
-#~ "Ignorer tout les systèmes de fichiers qui correspondent au type indiqué "
-#~ "(peut être utilisé plusieurs fois)"
-#~ msgid "Path or partition (may be repeated)"
-#~ msgstr "Répertoire ou partition (peut être utilisé plusieurs fois)"
-#~ msgid ""
-#~ "value match). If multiple addresses are returned at once, you have to "
-#~ "match"
-#~ msgstr ""
-#~ "valeur correspond). Si plusieurs adresses sont retournées en même temps,"
-#~ msgid ""
-#~ "the whole string of addresses separated with commas (sorted "
-#~ "alphabetically)."
-#~ msgstr ""
-#~ "vous devrez toutes les inscrire séparées pas des virgules (en ordre "
-#~ "alphabétique)"
-#~ msgid "No specific parameters. No warning or critical threshold"
-#~ msgstr "Pas d'argument spécifique. Pas de seuil d'avertissement ou critique"
-#~ msgid "Can't find local IP for NAS-IP-Address"
-#~ msgstr "Impossible de trouver une addresse IP locale pour le NAS-IP-Address"
-#~ msgid "Warning free space should be more than critical free space"
-#~ msgstr ""
-#~ "Le seuil d'avertissement pour la place libre doit être plus grand que le "
-#~ "seuil critique"
-#, c-format
-#~ msgid "%s - Plugin timed out after %d seconds\n"
-#~ msgstr "%s - Le plugin n'as pas répondu dans les %d secondes\n"
-#~ msgid "Critical Process Count must be an integer!"
-#~ msgstr "Critique Le total des processus doit être un nombre entier!"
-#~ msgid "Warning Process Count must be an integer!"
-#~ msgstr "Avertissement Le total des processus doit être un nombre entier!"
-#~ msgid "wmax (%d) cannot be greater than cmax (%d)\n"
-#~ msgstr "wmax (%d) ne peut pas être plus grand que cmax (%d)\n"
-#~ msgid "wmin (%d) cannot be less than cmin (%d)\n"
-#~ msgstr "wmin (%d) ne peut pas être plus petit que cmin (%d)\n"
-#~ msgid "CRITICAL - Cannot retrieve server certificate."
-#~ msgstr "CRITIQUE - Impossible d'obtenir le certificat du serveur"
-#~ msgid "OIDs."
-#~ msgstr "OIDs."
-#~ msgid "CRITICAL - Cannot retrieve server certificate.\n"
-#~ msgstr "CRITIQUE - Impossible d'obtenir le certificat du serveur.\n"
-#~ msgid "Usage: "
-#~ msgstr "Utilisation: "
-#~ msgid ""
-#~ " See: http://nagiosplugins.org/extra-opts for --extra-opts usage and "
-#~ "examples.\n"
-#~ msgstr ""
-#~ " Voir: http://nagiosplugins.org/extra-opts pour le format et examples de "
-#~ "--extra-opts.\n"