summaryrefslogtreecommitdiffstats
path: root/plugins-scripts
AgeCommit message (Collapse)AuthorFilesLines
2014-02-27subst.in: remove the led() functionEvgeni Golov1-17/+0
It was only used to replace the 'use lib utils.pm' with the proper libexec dir, which is now solved by using Perl's FinBin. Closes #1241
2014-02-27utils.pm: use FindBin instead of awk to find the path toEvgeni Golov10-10/+20
'use lib utils.pm' is not valid Perl syntax: Bareword "utils" not allowed while "strict subs" in use at plugins-scripts/check_ircd.pl line 52. Bareword "pm" not allowed while "strict subs" in use at plugins-scripts/check_ircd.pl line 52. This makes it impossible to use the plugins directly from the git tree, e.g. while hacking on them. Using FindBin::Bin as the library path allows that, while preserving the original behaviour of adding the libexec path when the plugin is properly installed.
2014-02-27check_mailq: add $mailq to check output, so it is easily visible what was ↵Evgeni Golov1-17/+17
autodetected Closes: #1242
2014-02-27check_mailq: document autodetection in the usage outputEvgeni Golov1-1/+3
2014-02-27check_mailq: try to autodetect which mailq implementation we are usingEvgeni Golov1-1/+24
This is done by looking at some common directories and files each MTA installs on the system. If no known file is found, the old default sendmail is used. Of course this still can be overridden by -M.
2014-01-29check_mailq: adding nullmailer supportJan Wagner1-2/+39
Adding nullmailer support to check_mailq submitted by Luca Corti Closes: #740 Closes: #1189
2014-01-29Just fixing small typo in commentJan Wagner1-1/+1
2014-01-24check_file_age: support for --ignore-missingJan Wagner2-5/+19
Patch to provide for a -i | --ignore-missing option. This allows files that don't exist to be monitored for without causing an error. The use case is: * one process periodically pushes files to an "input" queue for a second process * the second process, when running cleanly will "consume" (process and remove) these files So the conditions to meet are: 1. If the file doesn't exist, that's fine (OK) 2. If the file exists, but is less than X seconds, that's fine (OK) 3. If the file exists, but greater than X seconds, no good (CRITICAL) Since now check_file_age doesn't permit this behavior, as a non-existent file is considered CRITICAL. Test case was contributed by our lovely Holger. Closes #1181, Closes #989, Closes #862, Closes #1187, Closes #845 Closes Debian Bug #496307
2014-01-23Remove obsolete check_ntp.plThomas Guyot-Sionnest2-472/+1
2014-01-22fix outdated Free Software Foundation addressLars Vogdt4-5/+6
2014-01-21Capitalize "Monitoring Plugins"Holger Weiss1-1/+1
"Monitoring Plugins" is a name.
2014-01-21Merge branch 'maint'Holger Weiss1-1/+1
* maint: check_ssh: Get rid of sshd: Read from socket failed: Connection reset by peer fixed tests when there is no direct internet connection NEWS: Mention fix for check_http's -S option Fix for SSL Versioning when multiple options are used. Fix #1217 spec file fails to build due to duplicate files and unused files check_http: Don't let "-N" expect an argument README: Change GitHub URL README: Clarify license notice Update URLs and mailing list addresses Just using the posix conform extended regular expression grep check_oracle: --db +ASM bad string matching check_oracle doesn't correctly check for pmon +ASM instance from at least Oracle 11 as the pmon proces was renamed from ora_pmon_.* to asm_pmon_.*. -- Just turning attached patch of github issue #1207 into a push request. (Closes #1207) Update web site URLs Conflicts: FAQ NEWS README SUPPORT configure.in monitoring-plugins.spec.in pkg/solaris/pkginfo.in plugins-root/check_dhcp.c plugins-root/check_icmp.c plugins-scripts/check_ifoperstatus.pl plugins-scripts/check_mssql.pl plugins/check_apt.c plugins/check_by_ssh.c plugins/check_cluster.c plugins/check_dbi.c plugins/check_dig.c plugins/check_disk.c plugins/check_dns.c plugins/check_dummy.c plugins/check_fping.c plugins/check_game.c plugins/check_hpjd.c plugins/check_http.c plugins/check_ide_smart.c plugins/check_ldap.c plugins/check_load.c plugins/check_mrtg.c plugins/check_mrtgtraf.c plugins/check_mysql.c plugins/check_mysql_query.c plugins/check_nagios.c plugins/check_nt.c plugins/check_ntp.c plugins/check_ntp_peer.c plugins/check_ntp_time.c plugins/check_nwstat.c plugins/check_overcr.c plugins/check_pgsql.c plugins/check_ping.c plugins/check_procs.c plugins/check_radius.c plugins/check_real.c plugins/check_smtp.c plugins/check_snmp.c plugins/check_ssh.c plugins/check_swap.c plugins/check_tcp.c plugins/check_time.c plugins/check_ups.c plugins/check_users.c plugins/negate.c plugins/urlize.c plugins/utils.h po/Makevars po/de.po po/fr.po po/monitoring-plugins.pot
2014-01-19Project rename initial commit.Monitoring Plugins Development Team12-39/+36
This is an initial take at renaming the project to Monitoring Plugins. It's not expected to be fully complete, and it is expected to break things (The perl module for instance). More testing will be required before this goes mainline.
2014-01-13utils.sh: Don't define $ECHOHolger Weiss2-14/+7
In utils.sh, $ECHO was set to printf(1) or echo(1), depending on whether printf(1) is available in /usr/bin. This resulted in various bugs, as printf(1) cannot be used in the same way as echo(1). Thanks to Trevor Hemsley for reporting one of those bugs: If $ECHO was set to printf(1), check_log stumbled when reporting a log line with a "%" character.
2013-10-28Update URLs and mailing list addressesHolger Weiss2-2/+2
Now that we moved our infrastructure away from SourceForge, update the URLs and mailing list addresses accordingly.
2013-10-22Just using the posix conform extended regular expression greprefs/pull/1211/headJan Wagner1-2/+1
2013-10-22check_oracle: --db +ASM bad string matchingJan Wagner1-0/+1
check_oracle doesn't correctly check for pmon +ASM instance from at least Oracle 11 as the pmon proces was renamed from ora_pmon_.* to asm_pmon_.*. -- Just turning attached patch of github issue #1207 into a push request. (Closes #1207)
2013-09-17check_disk_smb: fixed number of tests to skipSven Nierlein1-5/+5
2013-09-16check_disk_smb: verify path to smbclientSven Nierlein1-0/+2
2013-08-20Merge branch 'master' of https://github.com/rafaeldriutti/nagios-pluginsHolger Weiss1-3/+3
* 'master' of https://github.com/rafaeldriutti/nagios-plugins: Changed the smbclient command used to fetch the free space available on the samba shares. Using du instead of ls, since it's much faster, specially with shares that have a lot of files. Closes #63.
2013-08-12Changed the smbclient command used to fetch the free space available on the ↵refs/pull/63/headRafael1-3/+3
samba shares. Using du instead of ls, since it's much faster, specially with shares that have a lot of files.
2013-05-19Made verbose output of check_sensors compilantrefs/pull/49/headGabriele Tozzi1-15/+18
2013-03-25Add option to perform real login in check_oracleBrian De Wolf1-0/+15
The Oracle plugin has no option for testing for a successful login. The closest option to this is --login, which uses a fixed set of credentials and expects to receive the logon failure error code. This patch adds an option called --connect. This option takes a full SID and returns success if it doesn't detect any error codes. With this, we can check that a database is allowing logins from valid credentials (and avoid filling up DB logs with failed authentications).
2012-10-09Added additional documentation to the check_range functionMarc Huffnagle1-1/+10
2012-06-23check_disk_smb: Add performance dataHolger Weiss1-12/+32
(Debian #654259 - Charles-Henri Larose)
2012-05-29Mention the check_range function in NEWS, etc.Holger Weiss1-3/+3
2012-05-29Added check_range shell function to utils.sh.inAlex Griffin1-0/+85
2011-09-07check_sensors: Use symbolic exit codesHolger Weiss1-10/+10
Specify the exit codes by using the constants from utils.sh.
2011-09-07check_sensors: Minor whitespace fixesHolger Weiss1-2/+2
2011-09-07check_sensors: Detect FAULT statusHolger Weiss1-4/+7
Return an UNKNOWN status if a faulty sensor is detected. This can be suppressed with the new "--ignore-fault" option. (Fixes Debian bug #615133, patch suggested by Jan Wagner.)
2010-11-28add test cases for check_disk_smbMatthias Eble1-0/+96
2010-11-28check_disk_smb now handles NT_STATUS_ACCESS_DENIED properly (Debian #601696)Matthias Eble1-1/+1
2010-11-28Make check_disk_smb accept spaces in share names (#990948, #1370031, Debian ↵Matthias Eble1-1/+1
#601699)
2010-07-07Allow check_ifstatus to accept version=2cTon Voon1-2/+5
2010-04-12Fix Debian bug #545940: Failure when run via ePNHolger Weiss1-4/+4
If Perl's "shift" function is called outside of a subroutine and without any argument, it usually shifts @ARGV. However, if a plugin is executed via ePN, such a call will shift @_ instead, so we must explicitly specify @ARGV for this to work as expected. This fixes Debian bug #545940, see: http://bugs.debian.org/545940 Commit de7191e3424e02ba278a39b86e8b1906a25d0362 fixed the same issue for check_disk_smb. (Reported by Hendrik Jaeger, forwarded by Jan Wagner.)
2010-04-11Fix Debian bug #478942: Fragile argument passingHolger Weiss1-25/+36
Fix some problems regarding the way check_disk_smb passes command line arguments to smbclient(1). | It runs: | | $res = qx/$smbclient "\/\/$host\/$share" $pass -W $workgroup \ | -U $user $smbclientoptions -I $address -c ls/; | | [...] | | The documentation says that if the password is not passed, it | defaults to "". That is not true above, as $pass expands to | nothing which leaves no argument at all (instead of an empty | argument) so is different from providing with an empty password | or with the -N option. | | Also, if the password starts with "-", you're in trouble, that's | why -U $user%$pass may be prefered. | | Also, the doc says that if $user is not provided, then it | defaults to "guest" but the problem is that if it is provided | but empty, it is changed to "guest" as well, which prevents us | from querying hosts that don't do user authentication. [ http://bugs.debian.org/478942 ] (Fixed by Stephane Chazelas, forwarded by Jan Wagner.)
2010-04-11Fix Debian bug #478906: Failure when run via ePNHolger Weiss1-6/+6
| When perl plugin scripts are run with the embedded perl interpreter in | nagios3, the "shift" perl command doesn't shift @ARGV, but @_ (which | happens to contain the same thing as @ARGV at the time the script was | started). | | [...] | | A fix is to replace all the instances of "shift" with "shift @ARGV". [ http://bugs.debian.org/478906 ] (Fixed by Stephane Chazelas, forwarded by Jan Wagner.)
2010-04-11Fix Debian bug #425129: SMB guest mode won't workHolger Weiss1-0/+1
| The check_disk_smb plugin purports to support guest users, but it | doesn't work out, because it doesn't specify the -N command line | option to smbclient when no password is specified, making smbclient | stop and ask. [ http://bugs.debian.org/425129 ] (Fixed by Josip Rodin, forwarded by Jan Wagner.)
2010-04-10check_disk_smb: Allow for specifying an IP addressHolger Weiss1-7/+23
Add the "-a, --address option" which allows for specifying the IP address of the server to connect to. If this option is used, the IP address will be handed over to smbclient(1)'s "-I" option. (Contributed by Sean Finney, forwarded by Jan Wagner.)
2009-09-25Allow custom versions with the release file...nagiosplugins1-1/+1
2009-09-19Fix check_ircd binding to wrong interface (#668778)Thomas Guyot-Sionnest1-16/+5
2009-06-13Fixed testcases for check_snmp, check_ifstatus and check_ifoperstatus when ↵Matthias Eble2-6/+10
no snmp community is specified The checks for invalid/unavailable hosts need a complete command line. They failed on hosts where no community was specified. Now, an invalid community is used so the tests can run on hosts w/o snmp host/community in NPTest.cache. Execution will fail anyway.
2009-06-13Further test parameters and skip blocks for check_ifoperstatus.t. ↵Matthias Eble2-23/+43
getTestparam changes for check_ifstatus.t and ifoperstatus.t Added snmp_interface and snmp_ifxtable test parameters to check_ifoperstatus.t. Also getTestParameter calls for both plugins were converted to use three arguments instead of undocumented >3 arg behaviour which led to redundant data in NPTest.cache.
2009-06-11renamed check_ifoperstatus' newly introdced -x to -P so it fits check_ifstatusMatthias Eble1-2/+2
check_ifstatus already used -x so both plugins can use same short option, now. to specify privacy protocol.
2009-06-11Fixed SNMPv3 behaviour of check_ifstatus. Added -P to define privprotocol ↵Matthias Eble2-103/+130
(#2343438 - Robin Schroeder) check_ifstatus didn't function correctly with SNMPv3. This is fixed now. Created argument-hash for SNMP session creation. This removes redundant code. Session creation was moved out of process_arguments() and now takes place after setting the timeout handler. Additionally the -P argument was added to specify the privprotocol.
2009-06-11Added testcases for check_ifoperstatusMatthias Eble1-0/+73
Added testcases for check_ifoperstatus. No SNMPv3 testing included for now.
2009-06-11minor fixes to check_ifoperstatusMatthias Eble1-3/+3
Minor output fixes for check_ifoperstatus. Fixed typo so that -n now implies -I as documented.
2009-06-11check_ifoperstatus is now more user friendly in case of missing argumentsMatthias Eble1-29/+25
Added proper usage messages in case of missing arguments. Removed accidently committed Data::Dumper call. Minor whitespace fixes.
2009-06-10Whitespace and indent fixes for check_ifoperstatusMatthias Eble1-109/+103
2009-06-10Fixed SNMPv3 behaviour of check_ifoperstatus. Added -x to define ↵Matthias Eble1-71/+39
privprotocol (#2343438 - Robin Schroeder) check_ifoperstatus didn't function correctly with SNMPv3. This is fixed now. Created argument-hash for SNMP session creation. This removes redundant code. Session creation was moved out of process_arguments() and now takes place after setting the timeout handler. Additionally the -x argument was added to specify the privprotocol.