| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If the new "-A" option is specified (or "notify.omitAuthor" is set), the
author name will be omitted from the subject of e-mail notifications.
|
|
The SHA1 object name part of Gitweb URLs is now only shortened if the
user requested this by specifying the new "-z" option (or by setting
"notify.shortURLs").
While at it, also shorten the additional URL which references a diff in
e-mail notifications which don't include that diff inline because its
size exceeds the maximum number of bytes specified via "-s".
Note that while the abbreviated SHA1 object names will be unique at push
time, this cannot be guaranteed for the future, so the shortened URLs
might break some day.
|
|
Only the author's name and address will now be mentioned in a commit
notification by default. However, if the "-C" option is specified (or
"notify.showCommitter" is set), the committer's name and address will
also be included in the notification if the committer is not the author
of the commit (as we previously did by default).
|
|
Making use of a state file in order to prevent duplicate notifications
is now optional. The user must explicitly specify a file path via the
"-t" option or by setting the git-config(1) variable "notify.statefile"
to activate this functionality.
|
|
As nothing in git-notify depends on the success of the mail(1) call,
don't abort if it fails, just spit out a warning.
|
|
Now that we don't ignore empty commits anymore, there's no need to keep
track of the number of commits actually notified about, as that will
always be equal to the number of commits returned by get_new_commits().
|
|
This reverts commit db63fbfa036f5cd757aedf4547fef9e195a8c285, as it is
no longer needed and we'd like to keep the diff against the git-notify
version maintained by the Wine people as small as possible. The purpose
of db63fbfa was to suppress notifications on empty merge commits, which
can now be requested directly by specifying git-notify's "-X" option.
(Our change was implemented before the "-X" option was available, even
though the Git history suggests otherwise.)
Conflicts:
tools/git-notify
|
|
This reverts commit 5445b9769f254781e482062bacc6603a5cd63059. Alexandre
Julliard pointed out that the code in question was used if git-notify
was explicitly called with the SHA1 name of an annotated tag object. At
the moment, the code in question actually _is_ unused due to later
modifications, but it wasn't at the time 5445b976 was committed, and
we'll add further changes so that the code will be used again in the
future.
Conflicts:
tools/git-notify
|
|
Fix the description of the "-U" option.
|
|
|
|
|
|
For shared repositories, the state file used by git-notify should
usually be group writable, so we now set the umask to 0002 by default.
This can be adjusted by setting the "notify.umask" configuration key or
by using the "-U" option on the command line.
|
|
The gitweb_url() subroutine was an unused and empty hangover.
|
|
The sed(1) command in question was a hangover which had no effect
anymore.
|
|
Properly check the exit status of all processes we execute and abort on
error.
|
|
Make sure that commit messages which use an encoding other than US-ASCII
or UTF-8 are handled correctly. Also, assume that the diff contents use
the same encoding as the commit message. This assumption may well be
wrong, but that's the best we can do.
|
|
Never notify on a given commit more than once, even if it's referenced
via multiple branch heads. We make sure this won't happen simply by
maintaining a list of commits we notified about. The file path used for
saving this list can be specified using the new "-t" option. (The
contrib/hooks/post-receive-email script distributed with Git tries hard
to avoid such a list, but it doesn't get the necessary magic right.)
|
|
Instead of using the full SHA1 values of commit object names within
Gitweb URLs, try to abbreviate them to a shorter unique name.
|
|
In commit notifications, specify the Gitweb URL (if any) at the bottom
of the ASCII "table" which summarizes the commit. That looks better.
|
|
If the first line of a commit message is longer than 50 characters,
truncate it before adding the resulting string to the subject line of a
notification. This makes sure the subject line won't get too long
(unless the commit author name is unusually long, which we don't check).
The Git User's Manual recommends keeping the first line of a commit
message shorter than that, anyway:
| Though not required, it's a good idea to begin the commit message with
| a single short (less than 50 character) line summarizing the change,
| followed by a blank line and then a more thorough description. Tools
| that turn commits into email, for example, use the first line on the
| Subject line and the rest of the commit in the body.
[ http://www.kernel.org/pub/software/scm/git/docs/user-manual.html ]
|
|
Do not only generate notifications on commits, but also if a branch head
or lightweight tag was created, removed, or modified. Notifications on
branch head updates are omitted if one or more commit notification have
been generated and the branch head now references a descendant of the
originally referenced commit (which should be the usual case).
|
|
Add a subroutine which abstracts away executing git-rev-list(1) and
checking the result in order to avoid code duplication.
|
|
If the committer is not the author of the commit, mention the committer
in addition to the author.
|
|
Most notifications include an ASCII "table" with two columns. The
formatting of these columns is now handled by the new format_table()
subroutine, so that the alignment can easily be changed in the future.
|
|
Omit notifications regarding commits which don't change the tree
whatsoever.
|
|
The code which handles notifications regarding tags was unused, as only
objects listed by git-rev-list(1) are considered, and git-rev-list(1)
never spits out the sha1 of a tag object.
|
|
Adjust the regular expression which catches the commit author name so
that it doesn't include the space character which follows that name.
|
|
Import the (self-written) git-update-mirror script, which updates clones
of Git repositories and then calls git-notify (in just the same way as a
post-receive hook would be called by Git). The git-notify script is
imported from git://source.winehq.org/git/tools.git (commit: 03d66f34)
and generates notifications on repository changes. We'll use these
scripts for generating our commit e-mails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(except for the NEWS file)
This reverts the following commits (latest first): f3e0909, 9f16b54, be8df51, f31cd40, 5270c7d, a25083f, f1bfe40, c503d85 and 6c476db
|
|
SunOS make will work only out of snapshots and releases.
|
|
|
|
This reverts commit 088452683cf881c6ed717cc559ca2eee3faa95ca.
|
|
|
|
For contrib/, full tags have been imported from subversion
git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2091 f882894a-f735-0410-b71e-b25c423dba1c
|
|
git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2081 f882894a-f735-0410-b71e-b25c423dba1c
|
|
git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2074 f882894a-f735-0410-b71e-b25c423dba1c
|
|
git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2060 f882894a-f735-0410-b71e-b25c423dba1c
|
|
git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2041 f882894a-f735-0410-b71e-b25c423dba1c
|
|
git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2039 f882894a-f735-0410-b71e-b25c423dba1c
|
|
this flag.
git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@2028 f882894a-f735-0410-b71e-b25c423dba1c
|
