From cad530a113e3049b1b20d8e1b93e9c486d29720a Mon Sep 17 00:00:00 2001 From: Subhendu Ghosh Date: Sun, 9 Feb 2003 14:20:30 +0000 Subject: new plugins git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@302 f882894a-f735-0410-b71e-b25c423dba1c diff --git a/contrib/check_adptraid.sh b/contrib/check_adptraid.sh new file mode 100644 index 0000000..d7f8d0c --- /dev/null +++ b/contrib/check_adptraid.sh @@ -0,0 +1,75 @@ +#! /bin/sh +# +# Modified check_sensors to check the alarm status of an Adaptec 3200S RAID +# controller. +# +# Scott Lambert -- lambert@lambertfam.org +# +# Tested on FreeBSD 4.7 with the adptfbsd_323.tgz package installed. This +# package installs all it's programs into /usr/dpt. +# + +PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin + +PROGNAME=`basename $0` +PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'` +REVISION=`echo '$Revision$' | sed -e 's/[^0-9.]//g'` + +. $PROGPATH/utils.sh + +RAIDUTIL_CMD="/usr/dpt/raidutil -A ?" + +print_usage() { + echo "Usage: $PROGNAME" +} + +print_help() { + print_revision $PROGNAME $REVISION + echo "" + print_usage + echo "" + echo "This plugin checks alarm status of Adaptec 3200S RAID controller." + echo "" + support + exit 0 +} + +case "$1" in + --help) + print_help + exit 0 + ;; + -h) + print_help + exit 0 + ;; + --version) + print_revision $PROGNAME $REVISION + exit 0 + ;; + -V) + print_revision $PROGNAME $REVISION + exit 0 + ;; + *) + raidutiloutput=`$RAIDUTIL_CMD 2>&1` + status=$? + if test "$1" = "-v" -o "$1" = "--verbose"; then + echo ${raidutiloutput} + fi + if test ${status} -eq 127; then + echo "RAIDUTIL UNKNOWN - command not found (did you install raidutil?)" + exit -1 + elif test ${status} -ne 0 ; then + echo "WARNING - raidutil returned state $status" + exit 1 + fi + if echo ${raidutiloutput} | egrep On > /dev/null; then + echo RAID CRITICAL - RAID alarm detected! + exit 2 + else + echo raid ok + exit 0 + fi + ;; +esac diff --git a/contrib/check_compaq_insight.pl b/contrib/check_compaq_insight.pl new file mode 100644 index 0000000..dfb0440 --- /dev/null +++ b/contrib/check_compaq_insight.pl @@ -0,0 +1,296 @@ +From mm@elabnet.de Mon Nov 18 09:59:04 2002 +Date: Mon, 18 Nov 2002 12:19:04 +0100 +From: Michael Markstaller +To: nagiosplug-devel@lists.sourceforge.net +Subject: [Nagiosplug-devel] Submission: check_insight / checking Compaq + Insight Agent status + +Hi, + +I've been looking to check the status/health of Compaq Insight Agents on +servers and found a spong plugin +(http://spong.sourceforge.net/downloads/plugins/spong-network/check_insi +ght) which I've slightly changed to work with Nagios. +I have pretty no idea of perl at all, just wanted to make it work for +me, so please don't shoot me for this copy-paste-code. I've tested some +basic things, it seems to work at least to report a warning if smthg is +degraded and OK of xcourse ;) +I'm also quite unsure if this is the right way to submit, so I'll just +try ;) +There're some "unknown" components on all servers I've checked so far, +if anybody has a documentation of what's exactly returned when getting +the OID 1.3.6.1.4.1.232.11.2.10.1.0 (CPQHOST_MIB isn't very descriptive) +I'd be happy to fix this. + +--- cut --- +#!/usr/bin/perl +# +# (c)2002 Michael Markstaller, Elaborated Networks GmbH +# send bug reports to +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# you should have received a copy of the GNU General Public License +# along with this program (or with Nagios); if not, write to the +# Free Software Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA +# +# +# Check Comapq Insight Management Agents Systems Status by SNMP +# based on the spong-plugin check_insight from: +# +http://spong.sourceforge.net/downloads/plugins/spong-network/check_insig +ht +# +# Usage: +# check_insight -H -C community +# + +use Net::SNMP; +use Getopt::Long; +Getopt::Long::Configure('bundling'); + +$version=0.01; + +my %ERRORS = ('UNKNOWN' , '-1', + 'OK' , '0', + 'WARNING', '1', + 'CRITICAL', '2'); + + +# +# some default values +# +$TIMEOUT=15; + +# +# get command line options the regular way +# +GetOptions + ("V" => \$opt_V, "version" => \$opt_V, + "h" => \$opt_h, "help" => \$opt_h, + "v" => \$verbose, "verbose" => \$verbose, + "H=s" => \$opt_H, "hostname=s" => \$opt_H, + "C=s" => \$opt_C, "community=s" => \$opt_C); + +# +# handle the verbose stuff first +# +if ($opt_V) { + print "\n"; + print "check_insight nagios plugin version $version\n"; + print "\n"; + print "The nagios plugins come with ABSOLUTELY NO WARRANTY. You +may redistribute\n"; + print "copies of the plugins under the terms of the GNU General +Public License.\n"; + print "For more information about these matters, see the file +named COPYING.\n"; + print "\n"; + print "(c)2002 Michael Markstaller, Elaborated Networks GmbH\n"; + print "\n"; + print "\n"; + exit $ERRORS{'UNKNOWN'}; +} + +if ($opt_h) { + print_help(); + exit $ERRORS{'UNKNOWN'}; +} + +# +# now get options the weired way and set the defaults +# if nothing else is provided +# +$opt_H = shift unless ($opt_H); +print_usage() unless ($opt_H); + +# +# dont let us wait forever... +# +$SIG{'ALRM'} = sub { + print ("ERROR: No response from server (alarm)\n"); + exit $ERRORS{"UNKNOWN"}; +}; +alarm($TIMEOUT); + + +# +# now we set things up for the real work +# and fire up the request +# + +######################################################################## +######## +my ($host) = ($opt_H); +my ($color, $summary, $message ) = ( "green", "", "" ); +($opt_C) || ($opt_C = shift) || ($opt_C = "public"); +my ($community) = $opt_C; + +# We use some look up tables for checking some config options. +my (@State) = ("Not Available", "Other", "OK", "Degraded", "Failed"); + +my (@MIBName) = ("", "Std", "Unknown", "Array", + "Netware", "SCSI", "Health","Unknown", + "Store", "SM2", "Thresh", "OS", "UPS", + "Unknown", "IDE", "Clusters", "Fibre", + "MIB", "NIC"); + +# These are the positions within the table to actually look at. +my (@MIBs) = (1, 2, 3, 5, 6, 10, 11, 14, 18); + +my ($oid) = "1.3.6.1.4.1.232.11.2.10.1.0"; # SysArray + +# Open the connection. +my ($session, $error) = Net::SNMP->session(Hostname => $host, + Community => $community); + +# If we can't open a connection, just return red straight away. +if (! defined $session) { + print ("ERROR: Unable to contact server '$opt_H'\n"); + exit $ERRORS{"UNKNOWN"}; +} + + +$session->translate; +my ($response) = $session->get_request($oid); + + if (!defined $response) { + # If there's no response, something screwy is going on, give up. + $summary = $session->error; + print ("ERROR: $summary\n"); + exit $ERRORS{"UNKNOWN"}; + $session->close; + } else { + $session->close; + + # I'm not convinced that this is the easiest way to go about this, +this is + # from some code which I've inherited and I've modified for use in +here. + # Hi George! + %h = %$response; + my ($d) = $h{$oid}; + + my (@list) = (); + + # Gobble the first two char's. + $d = substr $d,2; + + while (length($d) > 0) { + my ($v) = substr($d,0,2); + $v = hex($v); + $d = substr $d,2; + push @list, $v; + } + + # Value in $MIBs[1] is the overall status of the machine... + my ($cond) = $MIBs[1]; + $message .= "Status: $State[$cond] "; + + foreach my $v (@MIBs) { + $cond = $list[($v*4)+1]; # A little bit of magic. + + # We only bother printing the status out if it's actually +available, + # as if it's N/A or Unknown then it's probably because the machine + # isn't available. + $message .= "$MIBName[$v]: $State[$cond] " if $cond > 1; + next if $cond < 2; + + # What follows is some trickery to try and not to override a +previous + # message at the same or lower color. + if ($cond == 4) { + if ($color ne 'red') { + $color = 'red'; + $summary = "$MIBName[$v] is failed"; + } + } elsif ($cond == 3) { + if ($color ne 'red') { + $color = 'yellow'; + $summary = "$MIBName[$v] is degraded" if $summary eq ""; + } + } elsif ($cond < 2) { + if ($color eq 'green') { + $color = 'yellow'; + $summary = "$MIBName[$v] is unknown ($cond)" if $summary eq +""; + } + } + } + } + + $summary = "Ok" if $summary eq ""; + +# return ($color, $summary, $message); + +if ($color eq 'red') { + print ("red Output: $message\n"); + exit $ERRORS{"CRITICAL"}; + } elsif ($color eq 'yellow') { + print ("$summary $message\n"); + exit $ERRORS{"WARNING"}; + } elsif ($color eq 'green') { + print ("$message\n"); + exit $ERRORS{"OK"}; +} + + +sub print_usage () { + print "Usage: $0 -H -C \n"; } + +sub print_help () { + print "\n"; + print "\n"; + print "check_insight nagios plugin version $version\n"; + print "\n"; + print "The nagios plugins come with ABSOLUTELY NO WARRANTY. You +may redistribute\n"; + print "copies of the plugins under the terms of the GNU General +Public License.\n"; + print "For more information about these matters, see the file +named COPYING.\n"; + print "\n"; + print "(c)2002 Michael Markstaller, Elaborated Networks GmbH\n"; + print "\n"; + print "\n"; + print "This plugin checks the Compaq Insight Management agents +system status via SNMP on the specified host.\n"; + print "\n"; + print "\n"; + print_usage(); + print "\n"; + print "Options:\n"; + print " -H, --hostname=ADDRESS\n"; + print " host name argument for server.\n"; + print " -C, --community=STRING\n"; + print " SNMP Read-community string.\n"; + print " -h, --help\n"; + print " print detailed help screen.\n"; + print " -V, --version\n"; + print " print version information.\n"; + print "\n"; + print "\n"; +} +--- cut --- + +Michael + + +------------------------------------------------------- +This sf.net email is sponsored by: To learn the basics of securing +your web site with SSL, click here to get a FREE TRIAL of a Thawte +Server Certificate: http://www.gothawte.com/rd524.html +_______________________________________________ +Nagiosplug-devel mailing list +Nagiosplug-devel@lists.sourceforge.net +https://lists.sourceforge.net/lists/listinfo/nagiosplug-devel diff --git a/contrib/check_file_age.pl b/contrib/check_file_age.pl new file mode 100755 index 0000000..ae9311e --- /dev/null +++ b/contrib/check_file_age.pl @@ -0,0 +1,113 @@ +#!/bin/perl -w +# $Id$ + +# check_file.pl Copyright (C) 2003 Steven Grimm +# +# Checks a file's size and modification time to make sure it's not empty +# and that it's sufficiently recent. +# +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# you should have received a copy of the GNU General Public License +# along with this program (or with Nagios); if not, write to the +# Free Software Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA + +use strict; +use English; +use Getopt::Long; +use File::stat; +use vars qw($PROGNAME); +use lib utils.pm; +use utils qw (%ERRORS &print_revision &support); + +sub print_help (); +sub print_usage (); + +my ($opt_c, $opt_f, $opt_w, $opt_C, $opt_W, $opt_h, $opt_V); +my ($result, $message, $age, $size, $st); + +$PROGNAME="check_file"; + +$opt_w = 240; +$opt_c = 600; +$opt_W = 0; +$opt_C = 0; +$opt_f = ""; + +Getopt::Long::Configure('bundling'); +GetOptions( + "V" => \$opt_V, "version" => \$opt_V, + "h" => \$opt_h, "help" => \$opt_h, + "f=s" => \$opt_f, "file" => \$opt_f, + "w=f" => \$opt_w, "warning-age=f" => \$opt_w, + "W=f" => \$opt_W, "warning-size=f" => \$opt_W, + "c=f" => \$opt_c, "critical-age=f" => \$opt_c, + "C=f" => \$opt_C, "critical-size=f" => \$opt_C); + +if ($opt_V) { + print_revision($PROGNAME, '$Id$'); + exit $ERRORS{'OK'}; +} + +if ($opt_h) { + print_help(); + exit $ERRORS{'OK'}; +} + +$opt_f = shift unless ($opt_f); + +if (! $opt_f) { + print "No file specified\n"; + exit $ERRORS{'UNKNOWN'}; +} + +# Examine the file. +unless (-f $opt_f) { + print "$opt_f: File not found\n"; + exit $ERRORS{'UNKNOWN'}; +} + +$st = File::stat::stat($opt_f); +$age = time - $st->mtime; +$size = $st->size; + + +$result = 'OK'; + +if (($opt_c and $age > $opt_c) or ($opt_C and $size < $opt_C)) { + $result = 'CRITICAL'; +} +elsif (($opt_w and $age > $opt_w) or ($opt_W and $size < $opt_W)) { + $result = 'WARNING'; +} + +print "$result - $opt_f is $age seconds old and $size bytes\n"; +exit $ERRORS{$result}; + +sub print_usage () { + print "Usage:\n"; + print " $PROGNAME [-w ] [-c ] [-W ] [-C ] -f \n"; + print " $PROGNAME [-h | --help]\n"; + print " $PROGNAME [-V | --version]\n"; +} + +sub print_help () { + print_revision($PROGNAME, '$Id$'); + print "Copyright (c) 2003 Steven Grimm\n\n"; + print_usage(); + print "\n"; + print " File must be no more than this many seconds old\n"; + print " File must be at least this many bytes long\n"; + print "\n"; + support(); +} -- cgit v0.10-9-g596f