From 46f777549ac4361a5fc74ee86ddaacc5a8a2680d Mon Sep 17 00:00:00 2001 From: Stanley Hopcroft Date: Thu, 27 Jan 2005 10:32:48 +0000 Subject: Candidate successor to /plugins/check_ide_smart.c. Now in /contrib. NB there is another new plugin with sim function git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@1114 f882894a-f735-0410-b71e-b25c423dba1c diff --git a/contrib/check_smart.pl b/contrib/check_smart.pl new file mode 100644 index 0000000..3f9104d --- /dev/null +++ b/contrib/check_smart.pl @@ -0,0 +1,180 @@ +#!/usr/bin/perl -w + +# chec_smart +# Check S.M.A.R.T. enabled disks status. +# +# This uses smartmontools to check for disk status. +# This is NOT compatible with smartsuite +# Please use smartctl --smart=on --offlineauto=on --saveauto=on /dev/something +# or similar to enable automatic data collection, and RTFM about it. +# +# this uses sudo to access the smartctl program, so please add a line in sudoers +# nagios computername = NOPASSWD:/usr/sbin/smartctl +# +# CopyLeft Roy Sigurd Karlsbakk +# Developed under Debian/SID +# No warranties what so ever. If this toasts your PC, or your wife +# runs away with your girlfriend, or even me, don't blame me. +# +# Licenced under GPL +# + +use strict; +use Getopt::Long; + +my ( + $s, $i, $out, $retcode, $errtxt, $exitcode, + $device, $text_mode, $exitcode_mode, $help, $verbose, $type, +); +my $smartctl = "sudo /usr/sbin/smartctl"; +my $e_commandline = 0; +my $e_devopen = 0; +my $e_chksum = 0; +my $e_disk_failing = 0; +my $e_prefail = 0; +my $e_mayprefail = 0; +my $e_errlog = 0; +my $e_selftestlog = 0; + +sub end { + $s = shift; + $i = shift; + if ($i == 0) { + $s = "OK: $s"; + } elsif ($i == 1) { + $s = "WARNNG: $s"; + } elsif ($i == 2) { + $s = "CRITICAL: $s"; + } elsif ($i == 3) { + $s = "UNKNOWN: $s"; + } else { + $s = "OUT OF RANGE: $s"; + } + print "$s\n"; + exit($i); +} + +sub syntax { + $s = shift or $s = 'Unknown'; + printf STDERR ("Error: $s\n") unless ($help); + printf STDERR ("Syntax: %s (-t|-e) -d [-vh]\n", $0); + printf STDERR (" --text-mode -t check by parsing smartctl's output\n"); + printf STDERR (" --exitcode-mode -e check smartctl's exitcode (only works on IDE)\n"); + printf STDERR (" --device -d disk device to check\n"); + printf STDERR (" --type -T drive type. See the -d flag in the smartctl manual\n"); + printf STDERR (" --verbose -v verbose\n"); + printf STDERR (" --help -h this help\n"); + exit(0) if $help; + exit(3); +} + +Getopt::Long::Configure('bundling'); +GetOptions( + "d=s" => \$device, "device=s" => \$device, + "T=s" => \$type, "type=s" => \$type, + "t" => \$text_mode, "text-mode" => \$text_mode, + "e" => \$exitcode_mode, "exitcode-mode" => \$exitcode_mode, + "h" => \$help, "help" => \$help, + "v" => \$verbose, "verbose" => \$verbose +) || syntax("RTFM!"); + +syntax if ($help); +syntax("Need device to check") unless ($device); +syntax("Conflicting modes") if ($text_mode && $exitcode_mode); +syntax("Need test mode") unless ($text_mode || $exitcode_mode); +syntax("Exitcode mode only works on ATA drives") if ($exitcode_mode && ! ($device =~ /\/dev\/hd./)); + +if ($type) { + $type =~ s/[\r\n]*?//g; + print "type: '$type'\n" if ($verbose); + syntax("Valid --type entries include ata, scsi and 3ware,n") + unless (($type =~ /^ata$/) || ($type =~ /^scsi$/) || ($type =~ /^3ware,\d+$/)); +} +if (defined($type)) { + $type = "--device=$type"; +} else { + $type = ""; +} + +if ($text_mode) { + print "running $smartctl $type -H $device" if ($verbose); + unless (open SMARTCTL,"$smartctl $type -H $device|") { + print STDERR "Can't execute $smartctl: $!\n"; + exit(3); + } + while () { + last if (/=== START OF READ SMART DATA SECTION ===/); + } + $out = ; + print $out; + exit(0) if ($out =~ /PASSED/); + exit(2) if ($out =~ /SAVE ALL DATA/ || $out =~ /FAILED/); + exit(3); +} elsif ($exitcode_mode) { + print "Running $smartctl $type -q silent $device\n" if ($verbose); + system("$smartctl $type -q silent $device"); + $retcode = $?; + $e_commandline = 1 if ($retcode & 0x0100); + $e_devopen = 1 if ($retcode & 0x0200); + $e_chksum = 1 if ($retcode & 0x0400); + $e_disk_failing = 1 if ($retcode & 0x0800); + $e_prefail = 1 if ($retcode & 0x1000); + $e_mayprefail = 1 if ($retcode & 0x2000); + $e_errlog = 1 if ($retcode & 0x4000); + $e_selftestlog = 1 if ($retcode & 0x8000); + + print "$e_commandline $e_devopen $e_chksum $e_disk_failing $e_prefail $e_mayprefail $e_errlog $e_selftestlog\n" + if ($verbose); + + $exitcode = 0; + $errtxt = ""; + if ($exitcode) { + if ($e_commandline) { + $errtxt .= "Commandline didn't parse, "; + $exitcode = 3 if ($exitcode == 0); + } + if ($e_devopen) { + $errtxt .= "Device could not be opened, "; + $exitcode = 3 if ($exitcode == 0); + } + if ($e_chksum) { + $errtxt .= "Checksum failure somewhere, "; + $exitcode = 1 if ($exitcode != 2); + } + if ($e_disk_failing) { + $errtxt .= "Disk is failing!, "; + $exitcode = 2; + } + if ($e_prefail) { + $errtxt .= "Disk is in prefail, "; + $exitcode = 1 if ($exitcode != 2); + } + if ($e_mayprefail) { + $errtxt .= "Disk is close to prefail. Please check manually, "; + $exitcode = 1 if ($exitcode != 2); + } + if ($e_errlog) { + $errtxt .= "The device error log contains records of errors, "; + $exitcode = 1 if ($exitcode != 2); + } + if ($e_selftestlog) { + $errtxt .= "The device self-test log contains records of errors, "; + $exitcode = 1 if ($exitcode != 2); + } + if ($exitcode == 1) { + $errtxt = "WARNNG: $errtxt"; + } elsif ($exitcode == 2) { + $errtxt = "CRITICAL: $errtxt"; + } else { + $errtxt = "UNKNOWN: $errtxt"; + } + } else { + $errtxt = "OK"; + } + print "$errtxt\n"; + exit($exitcode); +} else { + print STDERR "Something's strange is going on :~|\n"; + exit(3); +} +# vim:ts=4:sw=4:cindent -- cgit v0.10-9-g596f