Nagios Plug-in Developer Guidelines Karl DeBisschop
karl@debisschop.net
Ethan Galstad Author of Nagios
netsaint@linuxbox.com
Hugo Gayosso
hgayosso@gnu.org
Subhendu Ghosh
sghosh@sourceforge.net
Stanley Hopcroft
stanleyhopcroft@sourceforge.net
2002 Nagios plug-in development guidelines 0.4 2 May 2002 2000 2001 2002 Karl DeBisschop, Ethan Galstad, Hugo Gayosso, Stanley Hopcroft, Subhendu Ghosh
About the guidelines The purpose of this guidelines is to provide a reference for the plug-in developers and encourage the standarization of the different kind of plug-ins: C, shell, perl, python, etc.
Copyright Nagios Plug-in Development Guidelines Copyright (C) 2000 2001 2002 Karl DeBisschop, Ethan Galstad, Hugo Gayosso, Stanley Hopcroft, Subhendu Ghosh Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. The plugins themselves are copyrighted by their respective authors.
Plugin Output for Nagios You should always print something to STDOUT that tells if the service is working or why its failing. Try to keep the output short - probably less that 80 characters. Remember that you ideally would like the entire output to appear in a pager message, which will get chopped off after a certain length.
Print only one line of text Nagios will only grab the first line of text from STDOUT when it notifies contacts about potential problems. If you print multiple lines, you're out of luck. Remember, keep it short and to the point.
Verbose output Use the -v flag for verbose output. You should allow multiple -v options for additional verbosity, up to a maximum of 3. The standard type of output should be: Verbose output levels Verbosity level Type of output 0 Single line, minimal output. Summary 1 Single line, additional information (eg list processes that fail) 2 Multi line, configuration debug output (eg ps command used) 3 Lots of detail for plugin problem diagnosis
Screen Output The plug-in should print the diagnostic and just the synopsis part of the help message. A well written plugin would then have --help as a way to get the verbose help. Code and output should try to respect the 80x25 size of a crt (remember when fixing stuff in the server room!)
Return the proper status code See below for the numeric values of status codes and their description. Remember to return an UNKNOWN state if bogus or invalid command line arguments are supplied or it you are unable to check the service.
Plugin Return Codes The return codes below are based on the POSIX spec of returning a positive value. Netsaint prior to v0.0.7 supported non-POSIX compliant return code of "-1" for unknown. Nagios supports POSIX return codes by default. Note: Some plugins will on occasion print on STDOUT that an error occurred and error code is 138 or 255 or some such number. These are usually caused by plugins using system commands and having not enough checks to catch unexpected output. Developers should include a default catch-all for system command output that returns an UNKOWN return code. Plugin Return Codes Numeric Value Service Status Status Description 0 OK The plugin was able to check the service and it appeared to be functioning properly 1 Warning The plugin was able to check the service, but it appeared to be above some "warning" threshold or did not appear to be working properly 2 Critical The plugin detected that either the service was not running or it was above some "critical" threshold 3 Unknown Invalid command line arguments were supplied to the plugin or the plugin was unable to check the status of the given hosts/service
System Commands and Auxiliary Files
Don't execute system commands without specifying their full path Don't use exec(), popen(), etc. to execute external commands without explicity using the full path of the external program. Doing otherwise makes the plugin vulnerable to hijacking by a trojan horse earlier in the search path. See the main plugin distribution for examples on how this is done.
Use spopen() if external commands must be executed If you have to execute external commands from within your plugin and you're writing it in C, use the spopen() function that Karl DeBisschop has written. The code for spopen() and spclose() is included with the core plugin distribution.
Don't make temp files unless absolutely required If temp files are needed, make sure that the plugin will fail cleanly if the file can't be written (e.g., too few file handles, out of disk space, incorrect permissions, etc.) and delete the temp file when processing is complete.
Don't be tricked into following symlinks If your plugin opens any files, take steps to ensure that you are not following a symlink to another location on the system.
Validate all input use routines in utils.c or utils.pm and write more as needed
Perl Plugins Perl plugins are coded a little more defensively than other plugins because of embedded Perl. When configured as such, embedded Perl Nagios (ePN) requires stricter use of the some of Perl's features. This section outlines some of the steps needed to use ePN effectively. Do not use BEGIN and END blocks since they will be called the first time and when Nagios shuts down with Embedded Perl (ePN). In particular, do not use BEGIN blocks to initialize variables. To use utils.pm, you need to provide a full path to the module in order for it to work with ePN. e.g. use lib "/usr/local/nagios/libexec"; use utils qw(...); Perl scripts should be called with "-w" All Perl plugins must compile cleanly under "use strict" - i.e. at least explicitly package names as in "$main::x" or predeclare every variable. Explicitly initialize each varialable in use. Otherwise with caching enabled, the plugin will not be recompilied each time, and therefore Perl will not reinitialize all the variables. All old variable values will still be in effect. Do not use < DATA > (these simply do not compile under ePN). Do not use named subroutines If writing to a file (perhaps recording performance data) explicitly close close it. The plugin never calls exit; that is caught by p1.pl, so output streams are never closed. As in all plugins need to monitor their runtime, specially if they are using network resources. Use of the alarm is recommended. Plugins may import a default time out ($TIMEOUT) from utils.pm. Perl plugins should import %ERRORS from utils.pm and then "exit $ERRORS{'OK'}" rather than "exit 0"
Runtime Timeouts Plugins have a very limited runtime - typically 10 sec. As a result, it is very important for plugins to maintain internal code to exit if runtime exceeds a threshold. All plugins should timeout gracefully, not just networking plugins. For instance, df may lock if you have automounted drives and your network fails - but on first glance, who'd think df could lock up like that. Plus, it should just be more error resistant to be able to time out rather than consume resources.
Use DEFAULT_SOCKET_TIMEOUT All network plugins should use DEFAULT_SOCKET_TIMEOUT to timeout
Add alarms to network plugins If you write a plugin which communicates with another networked host, you should make sure to set an alarm() in your code that prevents the plugin from hanging due to abnormal socket closures, etc. Nagios takes steps to protect itself against unruly plugins that timeout, but any plugins you create should be well behaved on their own.
Plugin Options A well written plugin should have --help as a way to get verbose help. Code and output should try to respect the 80x25 size of a crt (remember when fixing stuff in the server room!)
Option Processing For plugins written in C, we recommend the C standard getopt library for short options. Getopt_long is always available. For plugins written in Perl, we recommend Getopt::Long module. Positional arguments are strongly discouraged. There are a few reserved options that should not be used for other purposes: -V version (--version) -h help (--help) -t timeout (--timeout) -w warning threshold (--warning) -c critical threshold (--critical) -H hostname (--hostname) -v verbose (--verbose) In addition to the reserved options above, some other standard options are: -C SNMP community (--community) -a authentication password (--authentication) -l login name (--logname) -p port or password (--port or --passwd/--password)monitors operational -u url or username (--url or --username) Look at check_pgsql and check_procs to see how I currently think this can work. Standard options are: The option -V or --version should be present in all plugins. For C plugins it should result in a call to print_revision, a function in utils.c which takes two character arguments, the command name and the plugin revision. The -? option, or any other unparsable set of options, should print out a short usage statement. Character width should be 80 and less and no more that 23 lines should be printed (it should display cleanly on a dumb terminal in a server room). The option -h or --help should be present in all plugins. In C plugins, it should result in a call to print_help (or equivalent). The function print_help should call print_revision, then print_usage, then should provide detailed help. Help text should fit on an 80-character width display, but may run as many lines as needed. The option -v or --verbose should be present in all plugins. The user should be allowed to specify -v multiple times to increase the verbosity level, as described in .
Plugins with more than one type of threshold, or with threshold ranges Old style was to do things like -ct for critical time and -cv for critical value. That goes out the window with POSIX getopt. The allowable alternatives are: long options like -critical-time (or -ct and -cv, I suppose). repeated options like `check_load -w 10 -w 6 -w 4 -c 16 -c 10 -c 10` for brevity, the above can be expressed as `check_load -w 10,6,4 -c 16,10,10` ranges are expressed with colons as in `check_procs -C httpd -w 1:20 -c 1:30` which will warn above 20 instances, and critical at 0 and above 30 lists are expressed with commas, so Jacob's check_nmap uses constructs like '-p 1000,1010,1050:1060,2000' If possible when writing lists, use tokens to make the list easy to remember and non-order dependent - so check_disk uses '-c 10000,10%' so that it is clear which is the precentage and which is the KB values (note that due to my own lack of foresight, that used to be '-c 10000:10%' but such constructs should all be changed for consistency, though providing reverse compatibility is fairly easy). As always, comments are welcome - making this consistent without a host of long options was quite a hassle, and I would suspect that there are flaws in this strategy.
Coding guidelines See GNU Coding standards for general guidelines.
Comments You should use /* */ for comments and not // as some compilers do not handle the latter form
CVS comments When adding CVS comments at commit time, you can use the following prefixes: "-" for a comment that can be removed from the Changelog "*" for an important amendment to be included into a features list
New submissions and patches If you would like others to use your plugins and have it included in the standard distribution, please include patches for the relevant configuration files, in particular "configure.in". Otherwise submitted plugins will be included in the contrib directory. Plugins in the contrib directory are going to be migrated to the standard plugins/plugin-scripts directory as time permits and per user requests. The minimum requirements are: The standard command options are supported (--help, --version, --timeout, --warning, --critical) It is determined to be not redundant (for instance, we would not add a new version of check_disk just because someone had provide a plugin that had perf checking - we would incorporate the features into an exisiting plugin) One of the developers has had the time to audit the code and declare it ready for core It should also follow code format guidelines, and use functions from utils (perl or c or sh) rather than cooking it's own Patches should be submitted via the SourceForge and be announced to the mailing list. For new plugins, provide a diff to add to the EXTRAS list (configure.in) unless you are fairly sure that the plugin will work for all platforms with no non-standard software added. If possible please submit a test harness. Documentation on sample tests coming soon.