# Messages français pour Nagios Plugins
# Copyright (C) 2003 Nagios Plugin Development Group
# This file is distributed under the same license as the PACKAGE package.
# Karl DeBisschop <kdebisschop@users.sourceforge.net>, 2003.
#
msgid ""
msgstr ""
"Project-Id-Version: nagios-plugins 1.3.99\n"
"POT-Creation-Date: 2004-11-12 00:44+0000\n"
"PO-Revision-Date: 2003-07-25 06:55-0400\n"
"Last-Translator: Pierre-Antoine Angelini <paangelini@users.sourceforge.net>\n"
"Language-Team: French <traduc@traduc.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Report-Msgid-Bugs-To: \n"

#: plugins/check_by_ssh.c:70 plugins/check_dig.c:70 plugins/check_disk.c:165
#: plugins/check_fping.c:69 plugins/check_nagios.c:67 plugins/check_nt.c:112
#: plugins/check_nwstat.c:126 plugins/check_radius.c:112
#: plugins/check_ssh.c:56 plugins/check_tcp.c:212 plugins/check_users.c:52
#: plugins/negate.c:83
msgid "Could not parse arguments\n"
msgstr ""

#: plugins/check_by_ssh.c:75 plugins/check_dns.c:69 plugins/check_nagios.c:71
#: plugins/check_pgsql.c:140 plugins/check_ping.c:86 plugins/negate.c:87
msgid "Cannot catch SIGALRM"
msgstr ""

#: plugins/check_by_ssh.c:89
#, c-format
msgid "Unable to open pipe: %s"
msgstr ""

#: plugins/check_by_ssh.c:97 plugins/check_dig.c:97 plugins/check_dns.c:96
#: plugins/check_fping.c:89 plugins/check_hpjd.c:118 plugins/check_load.c:115
#: plugins/check_nagios.c:107 plugins/check_procs.c:133
#: plugins/check_snmp.c:179 plugins/check_swap.c:157 plugins/check_users.c:63
#: plugins/negate.c:97 plugins/urlize.c:93
#, c-format
msgid "Could not open stderr for %s\n"
msgstr ""

#: plugins/check_by_ssh.c:129
#, c-format
msgid "SSH WARNING: could not open %s\n"
msgstr ""

#: plugins/check_by_ssh.c:148
#, c-format
msgid "[%d] PROCESS_SERVICE_CHECK_RESULT;%s;%s;%d;%s\n"
msgstr ""

#: plugins/check_by_ssh.c:235
msgid "timeout interval must be an integer"
msgstr ""

#: plugins/check_by_ssh.c:241
msgid "invalid host name"
msgstr ""

#: plugins/check_by_ssh.c:246
msgid "port must be an integer"
msgstr ""

#: plugins/check_by_ssh.c:288
msgid "skip lines must be an integer"
msgstr ""

#: plugins/check_by_ssh.c:298
#, c-format
msgid "%s: You must provide a host name\n"
msgstr ""

#: plugins/check_by_ssh.c:300
#, c-format
msgid "%s: Invalid host name %s\n"
msgstr ""

#: plugins/check_by_ssh.c:316
msgid "No remotecmd\n"
msgstr ""

#: plugins/check_by_ssh.c:334
#, c-format
msgid ""
"%s: In passive mode, you must provide a service name for each command.\n"
msgstr ""

#: plugins/check_by_ssh.c:337
#, c-format
msgid ""
"%s: In passive mode, you must provide the host short name from the nagios "
"configs.\n"
msgstr ""

#: plugins/check_by_ssh.c:352
msgid ""
"Copyright (c) 1999 Karl DeBisschop <kdebisschop@users.sourceforge.net>\n"
msgstr ""

#: plugins/check_by_ssh.c:355
msgid ""
"This plugin uses SSH to execute commands on a remote host\n"
"\n"
msgstr ""

#: plugins/check_by_ssh.c:365
msgid ""
" -1, --proto1\n"
"    tell ssh to use Protocol 1\n"
" -2, --proto2\n"
"    tell ssh to use Protocol 2\n"
" -S, --skiplines=n\n"
"    Ignore first n lines on STDERR (to suppress a logon banner)\n"
" -f\n"
"    tells ssh to fork rather than create a tty\n"
msgstr ""

#: plugins/check_by_ssh.c:375
msgid ""
" -C, --command='COMMAND STRING'\n"
"    command to execute on the remote machine\n"
" -l, --logname=USERNAME\n"
"    SSH user name on remote host [optional]\n"
" -i, --identity=KEYFILE\n"
"    identity of an authorized key [optional]\n"
" -O, --output=FILE\n"
"    external command file for nagios [optional]\n"
" -s, --services=LIST\n"
"    list of nagios service names, separated by ':' [optional]\n"
" -n, --name=NAME\n"
"    short name of host in nagios configuration [optional]\n"
msgstr ""

#: plugins/check_by_ssh.c:393
msgid ""
"\n"
"The most common mode of use is to refer to a local identity file with\n"
"the '-i' option. In this mode, the identity pair should have a null\n"
"passphrase and the public key should be listed in the authorized_keys\n"
"file of the remote host. Usually the key will be restricted to running\n"
"only one command on the remote server. If the remote SSH server tracks\n"
"invocation agruments, the one remote program may be an agent that can\n"
"execute additional commands as proxy\n"
msgstr ""

#: plugins/check_by_ssh.c:402
msgid ""
"\n"
"To use passive mode, provide multiple '-C' options, and provide\n"
"all of -O, -s, and -n options (servicelist order must match '-C'\n"
"options)\n"
msgstr ""

#: plugins/check_by_ssh.c:407
msgid ""
"\n"
"$ check_by_ssh -H localhost -n lh -s c1:c2:c3 \\\n"
"    -C uptime -C uptime -C uptime -O /tmp/foo\n"
"$ cat /tmp/foo\n"
"[1080933700] PROCESS_SERVICE_CHECK_RESULT;flint;c1;0; up 2 days...\n"
"[1080933700] PROCESS_SERVICE_CHECK_RESULT;flint;c2;0; up 2 days...\n"
"[1080933700] PROCESS_SERVICE_CHECK_RESULT;flint;c3;0; up 2 days...\n"
msgstr ""

#: plugins/check_by_ssh.c:425
#, c-format
msgid ""
"\n"
"Usage: %s [-f46] [-t timeout] [-i identity] [-l user] -H <host> \n"
"  -C <command> [-n name] [-s servicelist] [-O outputfile] [-p port]\n"
msgstr ""

#: plugins/check_dig.c:67
msgid "Cannot catch SIGALRM\n"
msgstr ""

#: plugins/check_dig.c:91 plugins/check_dns.c:90 plugins/check_hpjd.c:112
#: plugins/check_nagios.c:101 plugins/check_procs.c:127
#: plugins/check_snmp.c:173 plugins/check_swap.c:151 plugins/check_users.c:57
#: plugins/negate.c:93 plugins/urlize.c:87
#, c-format
msgid "Could not open pipe: %s\n"
msgstr ""

#: plugins/check_dig.c:128
msgid "Server not found in ANSWER SECTION"
msgstr ""

#: plugins/check_dig.c:137
msgid "No ANSWER SECTION found"
msgstr ""

#: plugins/check_dig.c:154
msgid "dig returned error status"
msgstr ""

#: plugins/check_dig.c:161 plugins/check_dns.c:205 plugins/check_dns.c:208
#: plugins/check_dns.c:211
msgid " Probably a non-existent host/domain"
msgstr ""

#: plugins/check_dig.c:169
#, c-format
msgid "%.3f seconds response time (%s)"
msgstr ""

#: plugins/check_dig.c:219 plugins/check_pgsql.c:209 plugins/check_ping.c:201
#: plugins/check_time.c:220 plugins/negate.c:172 plugins/urlize.c:72
msgid "Unknown argument"
msgstr ""

#: plugins/check_dig.c:231 plugins/check_dig.c:288 plugins/check_hpjd.c:347
#: plugins/check_real.c:368 plugins/check_smtp.c:386
msgid "Invalid host name"
msgstr ""

#: plugins/check_dig.c:239
msgid "Server port must be a nonnegative integer"
msgstr ""

#: plugins/check_dig.c:250
msgid "Warning interval must be a nonnegative integer"
msgstr ""

#: plugins/check_dig.c:258
msgid "Critical interval must be a nonnegative integer"
msgstr ""

#: plugins/check_dig.c:266
msgid "Time interval must be a nonnegative integer"
msgstr ""

#: plugins/check_dig.c:324 plugins/urlize.c:132
msgid ""
"Copyright (c) 2000 Karl DeBisschop <kdebisschop@users.sourceforge.net>\n"
msgstr ""

#: plugins/check_dig.c:327
msgid ""
"Test the DNS service on the specified host using dig\n"
"\n"
msgstr ""

#: plugins/check_dig.c:335
msgid ""
" -l, --lookup=STRING\n"
"   machine name to lookup\n"
msgstr ""

#: plugins/check_dig.c:339
msgid ""
" -T, --record_type=STRING\n"
"   record type to lookup (default: A)\n"
msgstr ""

#: plugins/check_dig.c:343
msgid ""
" -a, --expected_address=STRING\n"
"   an address expected to be in the asnwer section.\n"
"   if not set, uses whatever was in -l\n"
msgstr ""

#: plugins/check_dig.c:363
#, c-format
msgid ""
"Usage: %s -H host -l lookup [-p <server port>] [-T <query type>]\n"
"         [-w <warning interval>] [-c <critical interval>] [-t <timeout>]\n"
"         [-a <expected answer address>] [-v]\n"
msgstr ""

#: plugins/check_disk.c:213
#, c-format
msgid ""
"%s\n"
"%.0f of %.0f %s (%.0f%%) free on %s (type %s mounted on %s) warn:%lu crit:%"
"lu warn%%:%.0f%% crit%%:%.0f%%"
msgstr ""

#: plugins/check_disk.c:231
#, c-format
msgid "%s [%s not found]"
msgstr ""

#: plugins/check_disk.c:307
msgid "Timeout Interval must be an integer!\n"
msgstr ""

#: plugins/check_disk.c:324 plugins/check_swap.c:391
msgid "Warning threshold must be integer or percentage!\n"
msgstr ""

#: plugins/check_disk.c:341 plugins/check_swap.c:408
msgid "Critical threshold must be integer or percentage!\n"
msgstr ""

#: plugins/check_disk.c:362
#, c-format
msgid "unit type %s not known\n"
msgstr ""

#: plugins/check_disk.c:365
#, c-format
msgid "failed allocating storage for '%s'\n"
msgstr ""

#: plugins/check_disk.c:440
msgid "check_disk: unrecognized option\n"
msgstr ""

#: plugins/check_disk.c:497
msgid "INPUT ERROR: No thresholds specified"
msgstr ""

#: plugins/check_disk.c:503
#, c-format
msgid ""
"INPUT ERROR: C_DFP (%f) should be less than W_DFP (%.1f) and both should be "
"between zero and 100 percent, inclusive"
msgstr ""

#: plugins/check_disk.c:510
#, c-format
msgid ""
"INPUT ERROR: C_DF (%lu) should be less than W_DF (%lu) and both should be "
"greater than zero"
msgstr ""

#: plugins/check_disk.c:575 plugins/check_dns.c:394 plugins/check_dummy.c:89
#: plugins/check_hpjd.c:381 plugins/check_http.c:1113 plugins/check_mrtg.c:311
#: plugins/check_mrtgtraf.c:323 plugins/check_nwstat.c:909
#: plugins/check_overcr.c:423 plugins/check_tcp.c:600
msgid "Copyright (c) 1999 Ethan Galstad <nagios@nagios.org>\n"
msgstr ""

#: plugins/check_disk.c:578
msgid ""
"This plugin checks the amount of used disk space on a mounted file system\n"
"and generates an alert if free space is less than one of the threshold "
"values."
msgstr ""

#: plugins/check_disk.c:586
#, c-format
msgid ""
" -w, --warning=INTEGER\n"
"   Exit with WARNING status if less than INTEGER kilobytes of disk are free\n"
" -w, --warning=PERCENT%%\n"
"   Exit with WARNING status if less than PERCENT of disk space is free\n"
" -c, --critical=INTEGER\n"
"   Exit with CRITICAL status if less than INTEGER kilobytes of disk are "
"free\n"
" -c, --critical=PERCENT%%\n"
"   Exit with CRITCAL status if less than PERCENT of disk space is free\n"
" -C, --clear\n"
"    Clear thresholds\n"
msgstr ""

#: plugins/check_disk.c:598
msgid ""
" -u, --units=STRING\n"
"    Choose bytes, kB, MB, GB, TB (default: MB)\n"
" -k, --kilobytes\n"
"    Same as '--units kB'\n"
" -m, --megabytes\n"
"    Same as '--units MB'\n"
msgstr ""

#: plugins/check_disk.c:606
msgid ""
" -l, --local\n"
"    Only check local filesystems\n"
" -p, --path=PATH, --partition=PARTITION\n"
"    Path or partition (may be repeated)\n"
" -x, --exclude_device=PATH <STRING>\n"
"    Ignore device (only works if -p unspecified)\n"
" -X, --exclude-type=TYPE <STRING>\n"
"    Ignore all filesystems of indicated type (may be repeated)\n"
" -M, --mountpoint\n"
"    Display the mountpoint instead of the partition\n"
" -e, --errors-only\n"
"    Display only devices/mountpoints with errors\n"
msgstr ""

#: plugins/check_disk.c:626
msgid ""
"Examples:\n"
" check_disk -w 10% -c 5% -p /tmp -p /var -C -w 100000 -c 50000 -p /\n"
"   Checks /tmp and /var at 10%,5% and / at 100MB, 50MB\n"
msgstr ""

#: plugins/check_disk.c:639
#, c-format
msgid ""
"Usage: %s -w limit -c limit [-p path | -x device] [-t timeout] [-m] [-e]\n"
"        [-v] [-q]\n"
"       %s (-h|--help)\n"
"       %s (-V|--version)\n"
msgstr ""

#: plugins/check_dns.c:108
msgid "Unknown error (plugin)"
msgstr ""

#: plugins/check_dns.c:128
#, c-format
msgid "DNS CRITICAL - '%s' returned empty host name string\n"
msgstr ""

#: plugins/check_dns.c:167
msgid "nslookup returned error status"
msgstr ""

#: plugins/check_dns.c:174
#, c-format
msgid "DNS CRITICAL - '%s' output parsing exited with no address\n"
msgstr ""

#: plugins/check_dns.c:180
#, c-format
msgid "expected %s but got %s"
msgstr ""

#: plugins/check_dns.c:186
#, c-format
msgid "server %s is not authoritative for %s"
msgstr ""

#: plugins/check_dns.c:198
msgid "DNS"
msgstr ""

#: plugins/check_dns.c:198 plugins/check_dummy.c:58 plugins/check_http.c:678
#: plugins/check_http.c:928 plugins/check_procs.c:263
msgid "OK"
msgstr ""

#: plugins/check_dns.c:199
#, c-format
msgid "%.3f second response time, "
msgid_plural "%.3f seconds response time, "
msgstr[0] ""
msgstr[1] ""

#: plugins/check_dns.c:200
#, c-format
msgid "%s returns %s"
msgstr ""

#: plugins/check_dns.c:204
#, c-format
msgid "DNS WARNING - %s\n"
msgstr ""

#: plugins/check_dns.c:207
#, c-format
msgid "DNS CRITICAL - %s\n"
msgstr ""

#: plugins/check_dns.c:210
#, c-format
msgid "DNS problem - %s\n"
msgstr ""

#: plugins/check_dns.c:228
#, c-format
msgid "No response from name server %s\n"
msgstr ""

#: plugins/check_dns.c:232
#, c-format
msgid "Name server %s has no records\n"
msgstr ""

#: plugins/check_dns.c:239
#, c-format
msgid "Connection to name server %s was refused\n"
msgstr ""

#: plugins/check_dns.c:245
#, c-format
msgid "Domain %s was not found by the server\n"
msgstr ""

#: plugins/check_dns.c:249
msgid "Network is unreachable\n"
msgstr ""

#: plugins/check_dns.c:253
#, c-format
msgid "Server failure for %s\n"
msgstr ""

#: plugins/check_dns.c:299 plugins/check_fping.c:243 plugins/check_game.c:210
#: plugins/check_overcr.c:335 plugins/check_radius.c:216
#: plugins/check_tcp.c:406 plugins/check_udp.c:147 plugins/check_users.c:143
#, c-format
msgid ""
"%s: Unknown argument: %s\n"
"\n"
msgstr ""

#: plugins/check_dns.c:316 plugins/check_dns.c:328 plugins/check_dns.c:339
#: plugins/check_dns.c:344 plugins/check_dns.c:357 plugins/check_dns.c:368
#: plugins/check_game.c:227 plugins/check_game.c:235
msgid "Input buffer overflow\n"
msgstr ""

#: plugins/check_dns.c:323
msgid ""
"Invalid server name/address\n"
"\n"
msgstr ""

#: plugins/check_dns.c:334 plugins/check_fping.c:257
#: plugins/check_radius.c:230
msgid ""
"Invalid host name/address\n"
"\n"
msgstr ""

#: plugins/check_dns.c:364
#, c-format
msgid ""
"Invalid name/address: %s\n"
"\n"
msgstr ""

#: plugins/check_dns.c:401
msgid ""
"-H, --hostname=HOST\n"
"   The name or address you want to query\n"
"-s, --server=HOST\n"
"   Optional DNS server you want to use for the lookup\n"
"-a, --expected-address=IP-ADDRESS\n"
"   Optional IP address you expect the DNS server to return\n"
"-A, --expect-authority\n"
"   Optionally expect the DNS server to be authoritative for the lookup\n"
msgstr ""

#: plugins/check_dns.c:413
msgid ""
"\n"
"This plugin uses the nslookup program to obtain the IP address\n"
"for the given host/domain query.  A optional DNS server to use may\n"
"be specified.  If no DNS server is specified, the default server(s)\n"
"specified in /etc/resolv.conf will be used.\n"
msgstr ""

#: plugins/check_dns.c:428
#, c-format
msgid ""
"Usage: %s -H host [-s server] [-a expected-address] [-A] [-t timeout]\n"
"       %s --help\n"
"       %s --version\n"
msgstr ""

#: plugins/check_dummy.c:42
msgid "Incorrect number of arguments supplied\n"
msgstr ""

#: plugins/check_dummy.c:52
msgid "Arguments to check_dummy must be an integer\n"
msgstr ""

#: plugins/check_dummy.c:61 plugins/check_http.c:680 plugins/check_procs.c:265
msgid "WARNING"
msgstr ""

#: plugins/check_dummy.c:64 plugins/check_http.c:682 plugins/check_procs.c:270
msgid "CRITICAL"
msgstr ""

#: plugins/check_dummy.c:67 plugins/check_http.c:676
msgid "UNKNOWN"
msgstr ""

#: plugins/check_dummy.c:70
#, c-format
msgid "Status %d is not a supported error state\n"
msgstr ""

#: plugins/check_dummy.c:96
msgid ""
"\n"
"This plugin will simply return the state corresponding to the numeric value\n"
"of the <state> argument with optional text.\n"
msgstr ""

#: plugins/check_dummy.c:108
#, c-format
msgid "Usage: %s <integer state> [optional text]\n"
msgstr ""

#: plugins/check_fping.c:83
#, c-format
msgid "Unable to open pipe: %s\n"
msgstr ""

#: plugins/check_fping.c:130
#, c-format
msgid "FPING unknown - %s not found\n"
msgstr ""

#: plugins/check_fping.c:134
#, c-format
msgid "FPING critical - %s is unreachable\n"
msgstr ""

#: plugins/check_fping.c:139
#, c-format
msgid "FPING critical - %s is down\n"
msgstr ""

#: plugins/check_fping.c:166
#, c-format
msgid "FPING %s - %s (loss=%.0f%%, rta=%f ms)|%s %s\n"
msgstr ""

#: plugins/check_fping.c:187
#, c-format
msgid "FPING %s - %s (loss=%.0f%% )|%s\n"
msgstr ""

#: plugins/check_fping.c:293
msgid "Packet size must be a positive integer"
msgstr ""

#: plugins/check_fping.c:299
msgid "Packet count must be a positive integer"
msgstr ""

#: plugins/check_fping.c:306
msgid ""
"Host name was not supplied\n"
"\n"
msgstr ""

#: plugins/check_fping.c:329
#, c-format
msgid "%s: Only one threshold may be packet loss (%s)\n"
msgstr ""

#: plugins/check_fping.c:333
#, c-format
msgid "%s: Only one threshold must be packet loss (%s)\n"
msgstr ""

#: plugins/check_fping.c:365
msgid "Copyright (c) 1999 Didi Rieder <adrieder@sbox.tu-graz.ac.at>\n"
msgstr ""

#: plugins/check_fping.c:368
msgid ""
"This plugin will use the /bin/fping command (from saint) to ping the\n"
"specified host for a fast check if the host is alive. Note that it is\n"
"necessary to set the suid flag on fping.\n"
"\n"
msgstr ""

#: plugins/check_fping.c:377
#, c-format
msgid ""
" -H, --hostname=HOST\n"
"    Name or IP Address of host to ping (IP Address bypasses name lookup,\n"
"    reducing system load)\n"
" -w, --warning=THRESHOLD\n"
"    warning threshold pair\n"
" -c, --critical=THRESHOLD\n"
"    critical threshold pair\n"
" -b, --bytes=INTEGER\n"
"    Size of ICMP packet (default: %d)\n"
" -n, --number=INTEGER\n"
"    Number of ICMP packets to send (default: %d)\n"
msgstr ""

#: plugins/check_fping.c:393
#, c-format
msgid ""
"\n"
"THRESHOLD is <rta>,<pl>%% where <rta> is the round trip average travel\n"
"time (ms) which triggers a WARNING or CRITICAL state, and <pl> is the\n"
"percentage of packet loss to trigger an alarm state.\n"
msgstr ""

#: plugins/check_fping.c:407
#, c-format
msgid "Usage: %s <host_address>\n"
msgstr ""

#: plugins/check_game.c:70 plugins/check_snmp.c:161
msgid "Incorrect arguments supplied\n"
msgstr ""

#: plugins/check_game.c:73
msgid "Copyright (c) 1999 Ian Cass, Knowledge Matters Limited\n"
msgstr ""

#: plugins/check_game.c:74
msgid "License: GPL\n"
msgstr ""

#: plugins/check_game.c:94
#, c-format
msgid "Error - Could not open pipe: %s\n"
msgstr ""

#: plugins/check_game.c:114
msgid "ERROR: Host type parameter incorrect!\n"
msgstr ""

#: plugins/check_game.c:313
#, fuzzy, c-format
msgid "This plugin tests %s connections with the specified host."
msgstr "Le plugin tests a %s connection with l'host specified\n"

#: plugins/check_game.c:319
msgid ""
"<game>        = Game type that is recognised by qstat (without the leading "
"dash)\n"
"<ip_address>  = The IP address of the device you wish to query\n"
" [port]        = Optional port of which to connect\n"
" [game_field]  = Field number in raw qstat output that contains game name\n"
" [map_field]   = Field number in raw qstat output that contains map name\n"
" [ping_field]  = Field number in raw qstat output that contains ping time\n"
msgstr ""

#: plugins/check_game.c:329
msgid ""
"\n"
"Notes:\n"
"- This plugin uses the 'qstat' command, the popular game server status query "
"tool .\n"
"  If you don't have the package installed, you will need to download it "
"from\n"
"  http://www.activesw.com/people/steve/qstat.html before you can use this "
"plugin.\n"
msgstr ""

#: plugins/check_game.c:344
#, c-format
msgid ""
"Usage: %s <game> <ip_address> [-p port] [-gf game_field] [-mf map_field]\n"
"  [-pf ping_field]\n"
msgstr ""

#: plugins/check_hpjd.c:87 plugins/check_mrtg.c:61 plugins/check_mrtgtraf.c:67
#: plugins/check_mysql.c:51 plugins/check_real.c:69 plugins/check_smtp.c:93
#: plugins/check_swap.c:93 plugins/check_time.c:64
msgid "Invalid command arguments supplied\n"
msgstr ""

#: plugins/check_hpjd.c:222
msgid "Paper Jam"
msgstr ""

#: plugins/check_hpjd.c:226
msgid "Out of Paper"
msgstr ""

#: plugins/check_hpjd.c:231
msgid "Printer Offline"
msgstr ""

#: plugins/check_hpjd.c:236
msgid "Peripheral Error"
msgstr ""

#: plugins/check_hpjd.c:240
msgid "Intervention Required"
msgstr ""

#: plugins/check_hpjd.c:244
msgid "Toner Low"
msgstr ""

#: plugins/check_hpjd.c:248
msgid "Insufficient Memory"
msgstr ""

#: plugins/check_hpjd.c:252
msgid "A Door is Open"
msgstr ""

#: plugins/check_hpjd.c:256
msgid "Output Tray is Full"
msgstr ""

#: plugins/check_hpjd.c:260
msgid "Data too Slow for Engine"
msgstr ""

#: plugins/check_hpjd.c:264
msgid "Unknown Paper Error"
msgstr ""

#: plugins/check_hpjd.c:269
#, c-format
msgid "Printer ok - (%s)\n"
msgstr ""

#: plugins/check_hpjd.c:324 plugins/check_mysql.c:132 plugins/check_real.c:306
#: plugins/check_smtp.c:294
msgid "Invalid host name\n"
msgstr ""

#: plugins/check_hpjd.c:337 plugins/check_load.c:230 plugins/check_mrtg.c:232
#: plugins/check_mrtgtraf.c:262 plugins/check_mysql.c:154
#: plugins/check_real.c:358 plugins/check_smtp.c:376 plugins/check_swap.c:423
msgid "Invalid argument\n"
msgstr ""

#: plugins/check_hpjd.c:384
msgid ""
"This plugin tests the STATUS of an HP printer with a JetDirect card.\n"
"Net-snmp must be installed on the computer running the plugin.\n"
"\n"
msgstr ""

#: plugins/check_hpjd.c:392
#, c-format
msgid ""
" -C, --community=STRING\n"
"    The SNMP community name (default=%s)\n"
msgstr ""

#: plugins/check_hpjd.c:405
#, c-format
msgid "Usage: %s -H host [-C community]\n"
msgstr ""

#: plugins/check_http.c:142
msgid "check_http: could not parse arguments\n"
msgstr ""

#: plugins/check_http.c:163
msgid "HTTP CRITICAL - Could not make SSL connection\n"
msgstr ""

#: plugins/check_http.c:169 plugins/check_http.c:501
msgid "ERROR: Cannot retrieve server certificate.\n"
msgstr ""

#: plugins/check_http.c:242
msgid "unknown argument"
msgstr ""

#: plugins/check_http.c:254
msgid "timeout interval must be a non-negative integer"
msgstr ""

#: plugins/check_http.c:260
msgid "invalid critical threshold"
msgstr ""

#: plugins/check_http.c:268
msgid "invalid warning threshold"
msgstr ""

#: plugins/check_http.c:282 plugins/check_http.c:297
msgid "check_http: invalid option - SSL is not available\n"
msgstr ""

#: plugins/check_http.c:291
msgid "invalid certificate expiration period"
msgstr ""

#: plugins/check_http.c:312
#, c-format
msgid "option f:%d \n"
msgstr ""

#: plugins/check_http.c:327
msgid "invalid port number"
msgstr ""

#: plugins/check_http.c:358
msgid "check_http: call for regex which was not a compiled option\n"
msgstr ""

#: plugins/check_http.c:372
#, c-format
msgid "Could Not Compile Regular Expression: %s"
msgstr ""

#: plugins/check_http.c:384 plugins/check_ldap.c:241 plugins/check_ping.c:224
#: plugins/check_smtp.c:366 plugins/check_ssh.c:128 plugins/check_tcp.c:425
msgid "IPv6 support not available\n"
msgstr ""

#: plugins/check_http.c:406
msgid "check_http: you must specify a server address or host name\n"
msgstr ""

#: plugins/check_http.c:494 plugins/check_http.c:509
msgid "Unable to open TCP socket\n"
msgstr ""

#: plugins/check_http.c:571
msgid "Client Certificate Required\n"
msgstr ""

#: plugins/check_http.c:573 plugins/check_http.c:578
msgid "Error in recv()\n"
msgstr ""

#: plugins/check_http.c:586
#, c-format
msgid "No data received %s\n"
msgstr ""

#: plugins/check_http.c:630
msgid "Invalid HTTP response received from host\n"
msgstr ""

#: plugins/check_http.c:633
#, c-format
msgid "Invalid HTTP response received from host on port %d\n"
msgstr ""

#: plugins/check_http.c:641
#, c-format
msgid "HTTP OK: Status line output matched \"%s\"\n"
msgstr ""

#: plugins/check_http.c:653
#, c-format
msgid "HTTP CRITICAL: Invalid Status Line (%s)\n"
msgstr ""

#: plugins/check_http.c:660
#, c-format
msgid "HTTP CRITICAL: Invalid Status (%s)\n"
msgstr ""

#: plugins/check_http.c:664
#, c-format
msgid "HTTP CRITICAL: %s\n"
msgstr ""

#: plugins/check_http.c:668
#, c-format
msgid "HTTP WARNING: %s\n"
msgstr ""

#: plugins/check_http.c:686
#, c-format
msgid " - %s - %.3f second response time %s%s|%s %s\n"
msgstr ""

#: plugins/check_http.c:698
#, c-format
msgid "HTTP problem: %s - %.3f second response time %s%s|%s %s\n"
msgstr ""

#: plugins/check_http.c:712 plugins/check_http.c:729
#, c-format
msgid "HTTP OK %s - %.3f second response time %s%s|%s %s\n"
msgstr ""

#: plugins/check_http.c:719
#, c-format
msgid "CRITICAL - string not found%s|%s %s\n"
msgstr ""

#: plugins/check_http.c:737
#, c-format
msgid "CRITICAL - pattern not found%s|%s %s\n"
msgstr ""

#: plugins/check_http.c:744
#, c-format
msgid "CRITICAL - Execute Error: %s\n"
msgstr ""

#: plugins/check_http.c:754
#, c-format
msgid "HTTP WARNING: page size %d too small%s|%s\n"
msgstr ""

#: plugins/check_http.c:759
#, c-format
msgid "HTTP OK %s - %d bytes in %.3f seconds %s%s|%s %s\n"
msgstr ""

#: plugins/check_http.c:795
msgid "ERROR: could not allocate addr\n"
msgstr ""

#: plugins/check_http.c:799 plugins/check_http.c:819
msgid "ERROR: could not allocate url\n"
msgstr ""

#: plugins/check_http.c:809
#, c-format
msgid "UNKNOWN - Could not find redirect location - %s%s\n"
msgstr ""

#: plugins/check_http.c:862
#, c-format
msgid "UNKNOWN - Could not parse redirect location - %s%s\n"
msgstr ""

#: plugins/check_http.c:872
#, c-format
msgid "WARNING - maximum redirection depth %d exceeded - %s://%s:%d%s%s\n"
msgstr ""

#: plugins/check_http.c:880
#, c-format
msgid "WARNING - redirection creates an infinite loop - %s://%s:%d%s%s\n"
msgstr ""

#: plugins/check_http.c:928
#, c-format
msgid "SSL seeding: %s\n"
msgstr ""

#: plugins/check_http.c:928
msgid "Failed"
msgstr ""

#: plugins/check_http.c:935
msgid "CRITICAL -  Cannot create SSL context.\n"
msgstr ""

#: plugins/check_http.c:959
msgid "CRITICAL - Cannot initiate SSL handshake.\n"
msgstr ""

#: plugins/check_http.c:987 plugins/check_http.c:999
msgid "CRITICAL - Wrong time format in certificate.\n"
msgstr ""

#: plugins/check_http.c:1028
#, c-format
msgid "WARNING - Certificate expires in %d day(s) (%s).\n"
msgstr ""

#: plugins/check_http.c:1032
#, c-format
msgid "CRITICAL - Certificate expired on %s.\n"
msgstr ""

#: plugins/check_http.c:1037
#, c-format
msgid "WARNING - Certificate expires today (%s).\n"
msgstr ""

#: plugins/check_http.c:1041
#, c-format
msgid "OK - Certificate will expire on %s.\n"
msgstr ""

#: plugins/check_http.c:1116
msgid ""
"This plugin tests the HTTP service on the specified host. It can test\n"
"normal (http) and secure (https) servers, follow redirects, search for\n"
"strings and regular expressions, check connection times, and report on\n"
"certificate expiration times.\n"
msgstr ""

#: plugins/check_http.c:1124
msgid "NOTE: One or both of -H and -I must be specified\n"
msgstr ""

#: plugins/check_http.c:1128
#, fuzzy, c-format
msgid ""
" -H, --hostname=ADDRESS\n"
"    Host name argument for servers using host headers (virtual host)\n"
" -I, --IP-address=ADDRESS\n"
"   IP address or name (use numeric address if possible to bypass DNS "
"lookup).\n"
" -p, --port=INTEGER\n"
"   Port number (default: %d)\n"
msgstr ""
" -H, --hostname=ADDRESS\n"
"    Host name argument for servers using host headers (use numeric\n"
"    address if possible to bypass DNS lookup).\n"
" -p, --port=INTEGER\n"
"    Port number\n"
" -4, --use-ipv4\n"
"    Use IPv4 connection\n"
" -6, --use-ipv6\n"
"    Use IPv6 connection\n"

#: plugins/check_http.c:1139
msgid ""
" -S, --ssl\n"
"    Connect via SSL\n"
" -C, --certificate=INTEGER\n"
"    Minimum number of days a certificate has to be valid.\n"
"    (when this option is used the url is not checked.)\n"
msgstr ""

#: plugins/check_http.c:1147
#, c-format
msgid ""
" -e, --expect=STRING\n"
"   String to expect in first (status) line of server response (default: %s)\n"
"   If specified skips all other status line logic (ex: 3xx, 4xx, 5xx "
"processing)\n"
" -s, --string=STRING\n"
"   String to expect in the content\n"
" -u, --url=PATH\n"
"   URL to GET or POST (default: /)\n"
" -P, --post=STRING\n"
"   URL encoded http POST data\n"
" -T, --content-type=STRING\n"
"   specify Content-Type header media type when POSTing\n"
msgstr ""

#: plugins/check_http.c:1161
msgid ""
" -l, --linespan\n"
"    Allow regex to span newlines (must precede -r or -R)\n"
" -r, --regex, --ereg=STRING\n"
"    Search page for regex STRING\n"
" -R, --eregi=STRING\n"
"    Search page for case-insensitive regex STRING\n"
msgstr ""

#: plugins/check_http.c:1170
msgid ""
" -a, --authorization=AUTH_PAIR\n"
"   Username:password on sites with basic authentication\n"
" -L, --link=URL\n"
"   Wrap output in HTML link (obsoleted by urlize)\n"
" -f, --onredirect=<ok|warning|critical|follow>\n"
"   How to handle redirected pages\n"
" -m, --min=INTEGER\n"
"   Minimum page size required (bytes)\n"
msgstr ""

#: plugins/check_http.c:1186
msgid ""
"This plugin will attempt to open an HTTP connection with the host. "
"Successful\n"
"connects return STATE_OK, refusals and timeouts return STATE_CRITICAL, "
"other\n"
"errors return STATE_UNKNOWN.  Successful connects, but incorrect reponse\n"
"messages from the host result in STATE_WARNING return values.  If you are\n"
"checking a virtual server that uses 'host headers' you must supply the FQDN\n"
"(fully qualified domain name) as the [host_name] argument.\n"
msgstr ""

#: plugins/check_http.c:1195
msgid ""
"\n"
"This plugin can also check whether an SSL enabled web server is able to\n"
"serve content (optionally within a specified time) or whether the X509 \n"
"certificate is still valid for the specified number of days.\n"
msgstr ""

#: plugins/check_http.c:1199
msgid ""
"\n"
"CHECK CONTENT: check_http -w 5 -c 10 --ssl www.verisign.com\n"
"\n"
"When the 'www.verisign.com' server returns its content within 5 seconds, a\n"
"STATE_OK will be returned. When the server returns its content but exceeds\n"
"the 5-second threshold, a STATE_WARNING will be returned. When an error "
"occurs,\n"
"a STATE_CRITICAL will be returned.\n"
"\n"
msgstr ""

#: plugins/check_http.c:1206
msgid ""
"CHECK CERTIFICATE: check_http www.verisign.com -C 14\n"
"\n"
"When the certificate of 'www.verisign.com' is valid for more than 14 days, "
"a\n"
"STATE_OK is returned. When the certificate is still valid, but for less "
"than\n"
"14 days, a STATE_WARNING is returned. A STATE_CRITICAL will be returned "
"when\n"
"the certificate is expired.\n"
msgstr ""

#: plugins/check_http.c:1224
#, c-format
msgid ""
"Usage: %s (-H <vhost> | -I <IP-address>) [-u <uri>] [-p <port>]\n"
"  [-w <warn time>] [-c <critical time>] [-t <timeout>] [-L]\n"
"  [-a auth] [-f <ok | warn | critcal | follow>] [-e <expect>]\n"
"  [-s string] [-l] [-r <regex> | -R <case-insensitive regex>]\n"
"  [-P string] [-m min_pg_size] [-4|-6]\n"
msgstr ""

#: plugins/check_ide-smart.c:163
#, c-format
msgid "Critical: SMART_READ_VALUES: %s\n"
msgstr ""

#: plugins/check_ide-smart.c:228
#, c-format
msgid "Critical: %d Harddrive PreFailure%cDetected! %d/%d tests failed.\n"
msgstr ""

#: plugins/check_ide-smart.c:235
#, c-format
msgid "Warning: %d Harddrive Advisor%s Detected. %d/%d tests failed.\n"
msgstr ""

#: plugins/check_ide-smart.c:242
#, c-format
msgid "Status: Operational (%d/%d tests passed)\n"
msgstr ""

#: plugins/check_ide-smart.c:245
#, c-format
msgid "Error: Status '%d' uknown. %d/%d tests passed\n"
msgstr ""

#: plugins/check_ide-smart.c:274
#, c-format
msgid "OffLineStatus=%d {%s}, AutoOffLine=%s, OffLineTimeout=%d minutes\n"
msgstr ""

#: plugins/check_ide-smart.c:280
#, c-format
msgid "OffLineCapability=%d {%s %s %s}\n"
msgstr ""

#: plugins/check_ide-smart.c:286
#, c-format
msgid "SmartRevision=%d, CheckSum=%d, SmartCapability=%d {%s %s}\n"
msgstr ""

#: plugins/check_ide-smart.c:323
#, c-format
msgid "Critical: %s: %s\n"
msgstr ""

#: plugins/check_ide-smart.c:340
#, c-format
msgid "Critical: SMART_READ_THRESHOLDS: %s\n"
msgstr ""

#: plugins/check_ide-smart.c:358
msgid ""
"Usage: check_ide-smart [DEVICE] [OPTION]\n"
" -d, --device=DEVICE\n"
"    Select device DEVICE\n"
" -i, --immediate\n"
"    Perform immediately offline tests\n"
" -q, --quiet-check\n"
"    Returns the number of failed tests\n"
" -1, --auto-on\n"
"    Turn on automatic offline tests\n"
" -0, --auto-off\n"
"    Turn off automatic offline tests\n"
" -n, --net-saint\n"
"    Output suitable for Net Saint\n"
" -h, --help\n"
" -V, --version\n"
msgstr ""

#: plugins/check_ide-smart.c:436
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr ""

#: plugins/check_ide-smart.c:453
#, c-format
msgid "Critical: Couldn't open device: %s\n"
msgstr ""

#: plugins/check_ide-smart.c:458
msgid "Critical: SMART_CMD_ENABLE\n"
msgstr ""

#: plugins/check_ldap.c:74
msgid "check_ldap: could not parse arguments\n"
msgstr ""

#: plugins/check_ldap.c:88
#, c-format
msgid "Could not connect to the server at port %i\n"
msgstr ""

#: plugins/check_ldap.c:96
#, c-format
msgid "Could not set protocol version %d\n"
msgstr ""

#: plugins/check_ldap.c:104
msgid "Could not bind to the ldap-server\n"
msgstr ""

#: plugins/check_ldap.c:112
#, c-format
msgid "Could not search/find objectclasses in %s\n"
msgstr ""

#: plugins/check_ldap.c:135
#, c-format
msgid "LDAP %s - %.3f seconds response time|%s\n"
msgstr ""

#: plugins/check_ldap.c:198
msgid "timeout interval must be a positive integer"
msgstr ""

#: plugins/check_ldap.c:245
msgid "check_ldap: could not parse unknown arguments\n"
msgstr ""

#: plugins/check_ldap.c:264
msgid "please specify the host name\n"
msgstr ""

#: plugins/check_ldap.c:267
msgid "please specify the LDAP base\n"
msgstr ""

#: plugins/check_ldap.c:286
msgid "Copyright (c) 1999 Didi Rieder (adrieder@sbox.tu-graz.ac.at)\n"
msgstr ""

#: plugins/check_ldap.c:297
msgid ""
" -a [--attr]\n"
"    ldap attribute to search (default: \"(objectclass=*)\"\n"
" -b [--base]\n"
"    ldap base (eg. ou=my unit, o=my org, c=at)\n"
" -D [--bind]\n"
"    ldap bind DN (if required)\n"
" -P [--pass]\n"
"    ldap password (if required)\n"
msgstr ""

#: plugins/check_ldap.c:308
#, c-format
msgid ""
" -2 [--ver2]\n"
"     use ldap protocol version 2\n"
" -3 [--ver3]\n"
"    use ldap protocol version 3\n"
"    (default protocol version: %d)\n"
msgstr ""

#: plugins/check_ldap.c:332
#, c-format
msgid ""
"Usage: %s -H <host> -b <base_dn> [-p <port>] [-a <attr>] [-D <binddn>]\n"
"  [-P <password>] [-w <warn_time>] [-c <crit_time>] [-t timeout]%s\n"
"(Note: all times are in seconds.)\n"
msgstr ""

#: plugins/check_load.c:91 plugins/check_load.c:110
#, c-format
msgid "Error opening %s\n"
msgstr ""

#: plugins/check_load.c:122
#, c-format
msgid "Error code %d returned in %s\n"
msgstr ""

#: plugins/check_load.c:131
msgid "Error in getloadavg()\n"
msgstr ""

#: plugins/check_load.c:134 plugins/check_load.c:136
#, c-format
msgid "Error processing %s\n"
msgstr ""

#: plugins/check_load.c:142
#, c-format
msgid "load average: %.2f, %.2f, %.2f"
msgstr ""

#: plugins/check_load.c:205
msgid "Warning threshold must be float or float triplet!\n"
msgstr ""

#: plugins/check_load.c:221
msgid "Critical threshold must be float or float triplet!\n"
msgstr ""

#: plugins/check_load.c:276
msgid "Warning threshold for 1-minute load average is not specified\n"
msgstr ""

#: plugins/check_load.c:278
msgid "Warning threshold for 5-minute load average is not specified\n"
msgstr ""

#: plugins/check_load.c:280
msgid "Warning threshold for 15-minute load average is not specified\n"
msgstr ""

#: plugins/check_load.c:282
msgid "Critical threshold for 1-minute load average is not specified\n"
msgstr ""

#: plugins/check_load.c:284
msgid "Critical threshold for 5-minute load average is not specified\n"
msgstr ""

#: plugins/check_load.c:286
msgid "Critical threshold for 15-minute load average is not specified\n"
msgstr ""

#: plugins/check_load.c:288
msgid ""
"Parameter inconsistency: 1-minute \"warning load\" greater than \"critical "
"load\".\n"
msgstr ""

#: plugins/check_load.c:290
msgid ""
"Parameter inconsistency: 5-minute \"warning load\" greater than \"critical "
"load\".\n"
msgstr ""

#: plugins/check_load.c:292
msgid ""
"Parameter inconsistency: 15-minute \"warning load\" greater than \"critical "
"load\".\n"
msgstr ""

#: plugins/check_load.c:306
msgid ""
"Copyright (c) 1999 Felipe Gustavo de Almeida <galmeida@linux.ime.usp.br>\n"
msgstr ""

#: plugins/check_load.c:309
msgid ""
"This plugin tests the current system load average.\n"
"\n"
msgstr ""

#: plugins/check_load.c:315
msgid ""
" -w, --warning=WLOAD1,WLOAD5,WLOAD15\n"
"   Exit with WARNING status if load average exceeds WLOADn\n"
" -c, --critical=CLOAD1,CLOAD5,CLOAD15\n"
"   Exit with CRITICAL status if load average exceed CLOADn\n"
"\n"
"the load average format is the same used by \"uptime\" and \"w\"\n"
"\n"
msgstr ""

#: plugins/check_load.c:328
#, c-format
msgid "Usage: %s -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15\n"
msgstr ""

#: plugins/check_mrtg.c:66 plugins/check_mrtgtraf.c:72
msgid "Unable to open MRTG log file\n"
msgstr ""

#: plugins/check_mrtg.c:114 plugins/check_mrtgtraf.c:114
msgid "Unable to process MRTG log file\n"
msgstr ""

#: plugins/check_mrtg.c:123 plugins/check_mrtgtraf.c:120
#, c-format
msgid "MRTG data has expired (%d minutes old)\n"
msgstr ""

#: plugins/check_mrtg.c:141 plugins/check_mrtgtraf.c:179
#: plugins/check_mrtgtraf.c:180
msgid "Avg"
msgstr ""

#: plugins/check_mrtg.c:141 plugins/check_mrtgtraf.c:179
#: plugins/check_mrtgtraf.c:180
msgid "Max"
msgstr ""

#: plugins/check_mrtg.c:211 plugins/check_mrtg.c:263
msgid "Invalid variable number\n"
msgstr ""

#: plugins/check_mrtg.c:246
#, c-format
msgid ""
"%s is not a valid expiration time\n"
"Use '%s -h' for additional help\n"
msgstr ""

#: plugins/check_mrtg.c:290
msgid "You must supply the variable number\n"
msgstr ""

#: plugins/check_mrtg.c:314
msgid ""
"This plugin will check either the average or maximum value of one of the\n"
"two variables recorded in an MRTG log file.\n"
msgstr ""

#: plugins/check_mrtg.c:322
msgid ""
" -F, --logfile=FILE\n"
"   The MRTG log file containing the data you want to monitor\n"
" -e, --expires=MINUTES\n"
"   Minutes before MRTG data is considered to be too old\n"
" -a, --aggregation=AVG|MAX\n"
"   Should we check average or maximum values?\n"
" -v, --variable=INTEGER\n"
"   Which variable set should we inspect? (1 or 2)\n"
" -w, --warning=INTEGER\n"
"   Threshold value for data to result in WARNING status\n"
" -c, --critical=INTEGER\n"
"   Threshold value for data to result in CRITICAL status\n"
msgstr ""

#: plugins/check_mrtg.c:336
#, c-format
msgid ""
" -l, --label=STRING\n"
"   Type label for data (Examples: Conns, \"Processor Load\", In, Out)\n"
" -u, --units=STRING\n"
"   Option units label for data (Example: Packets/Sec, Errors/Sec, \n"
"   \"Bytes Per Second\", \"%% Utilization\")\n"
msgstr ""

#: plugins/check_mrtg.c:343
msgid ""
"If the value exceeds the <vwl> threshold, a WARNING status is returned.  If\n"
"the value exceeds the <vcl> threshold, a CRITICAL status is returned.  If\n"
"the data in the log file is older than <expire_minutes> old, a WARNING\n"
"status is returned and a warning message is printed.\n"
"\n"
msgstr ""

#: plugins/check_mrtg.c:349
msgid ""
"This plugin is useful for monitoring MRTG data that does not correspond to\n"
"bandwidth usage.  (Use the check_mrtgtraf plugin for monitoring bandwidth).\n"
"It can be used to monitor any kind of data that MRTG is monitoring - "
"errors,\n"
"packets/sec, etc.  I use MRTG in conjuction with the Novell NLM that allows\n"
"me to track processor utilization, user connections, drive space, etc and\n"
"this plugin works well for monitoring that kind of data as well.\n"
"\n"
msgstr ""

#: plugins/check_mrtg.c:356
msgid ""
"Notes:\n"
"- This plugin only monitors one of the two variables stored in the MRTG log\n"
"  file.  If you want to monitor both values you will have to define two\n"
"  commands with different values for the <variable> argument.  Of course,\n"
"  you can always hack the code to make this plugin work for you...\n"
"- MRTG stands for the Multi Router Traffic Grapher.  It can be downloaded "
"from\n"
"  http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/mrtg.html\n"
msgstr ""

#: plugins/check_mrtg.c:376
#, c-format
msgid ""
"Usage: %s -F log_file -a <AVG | MAX> -v variable -w warning -c critical\n"
"  [-l label] [-u units] [-e expire_minutes] [-t timeout] [-v]\n"
msgstr ""

#: plugins/check_mrtgtraf.c:178
#, c-format
msgid "%s. In = %0.1f %s, %s. Out = %0.1f %s|%s %s\n"
msgstr ""

#: plugins/check_mrtgtraf.c:191
#, c-format
msgid "Traffic %s - %s\n"
msgstr ""

#: plugins/check_mrtgtraf.c:330
msgid ""
" -F, --filename=STRING\n"
"   File to read log from\n"
" -e, --expires=INTEGER\n"
"   Minutes after which log expires\n"
" -a, --aggregation=(AVG|MAX)\n"
"   Test average or maximum\n"
" -w, --warning\n"
"   Warning threshold pair \"<incoming>,<outgoing>\"\n"
" -c, --critical\n"
"   Critical threshold pair \"<incoming>,<outgoing>\"\n"
msgstr ""

#: plugins/check_mrtgtraf.c:342
msgid ""
"\n"
"This plugin will check the incoming/outgoing transfer rates of a router,\n"
"switch, etc recorded in an MRTG log.  If the newest log entry is older\n"
"than <expire_minutes>, a WARNING status is returned. If either the\n"
"incoming or outgoing rates exceed the <icl> or <ocl> thresholds (in\n"
"Bytes/sec), a CRITICAL status results.  If either of the rates exceed\n"
"the <iwl> or <owl> thresholds (in Bytes/sec), a WARNING status results.\n"
"\n"
msgstr ""

#: plugins/check_mrtgtraf.c:350
msgid ""
"Notes:\n"
"- MRTG stands for Multi Router Traffic Grapher. It can be downloaded from\n"
"  http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/mrtg.html\n"
"- While MRTG can monitor things other than traffic rates, this\n"
"  plugin probably won't work with much else without modification.\n"
"- The calculated i/o rates are a little off from what MRTG actually\n"
"  reports.  I'm not sure why this is right now, but will look into it\n"
"  for future enhancements of this plugin.\n"
msgstr ""

#: plugins/check_mrtgtraf.c:368
#, c-format
msgid ""
"Usage: %s -F <log_file> -a <AVG | MAX> -v <variable> -w <warning_pair> -c "
"<critical_pair>\n"
"  [-e expire_minutes] [-t timeout] [-v]\n"
msgstr ""

#: plugins/check_mysql.c:221
#, fuzzy
msgid "This program tests connections to a mysql server\n"
msgstr "Le plugin tests a %s connection with l'host specified\n"

#: plugins/check_mysql.c:229
msgid ""
" -d, --database=STRING\n"
"   Check database with indicated name\n"
" -u, --username=STRING\n"
"   Connect using the indicated username\n"
" -p, --password=STRING\n"
"   Use the indicated password to authenticate the connection\n"
"   ==> IMPORTANT: THIS FORM OF AUTHENTICATION IS NOT SECURE!!! <==\n"
"   Your clear-text password will be visible as a process table entry\n"
msgstr ""

#: plugins/check_mysql.c:239
#, c-format
msgid ""
"\n"
"There are no required arguments. By default, the local database with\n"
"a server listening on MySQL standard port %d will be checked\n"
msgstr ""

#: plugins/check_mysql.c:252
#, c-format
msgid "Usage: %s [-d database] [-H host] [-P port] [-u user] [-p password]\n"
msgstr ""

#: plugins/check_nagios.c:81
msgid "Error: Cannot open status log for reading!\n"
msgstr ""

#: plugins/check_nagios.c:138
#, c-format
msgid "Found process: %s %s\n"
msgstr ""

#: plugins/check_nagios.c:159
msgid "Could not locate a running Nagios process!\n"
msgstr ""

#: plugins/check_nagios.c:170
#, c-format
msgid "Nagios %s: located %d process%s, status log updated %d second%s ago\n"
msgstr ""

#: plugins/check_nagios.c:209 plugins/check_nagios.c:243
#, c-format
msgid ""
"Expiration time must be an integer (seconds)\n"
"Type '%s -h' for additional help\n"
msgstr ""

#: plugins/check_nagios.c:223
#, c-format
msgid ""
"%s: Unknown argument: %c\n"
"\n"
msgstr ""

#: plugins/check_nagios.c:255
#, c-format
msgid ""
"You must provide the status_log\n"
"Type '%s -h' for additional help\n"
msgstr ""

#: plugins/check_nagios.c:259
#, c-format
msgid ""
"You must provide a process string\n"
"Type '%s -h' for additional help\n"
msgstr ""

#: plugins/check_nagios.c:277
msgid ""
"This plugin attempts to check the status of the Nagios process on the local\n"
"machine. The plugin will check to make sure the Nagios status log is no "
"older\n"
"than the number of minutes specified by the <expire_minutes> option.  It "
"also\n"
"uses the /bin/ps command to check for a process matching whatever you "
"specify\n"
"by the <process_string> argument.\n"
msgstr ""

#: plugins/check_nagios.c:288
msgid ""
"-F, --filename=FILE\n"
"   Name of the log file to check\n"
"-e, --expires=INTEGER\n"
"   Seconds aging afterwhich logfile is condsidered stale\n"
"-C, --command=STRING\n"
"   Command to search for in process table\n"
msgstr ""

#: plugins/check_nagios.c:296
msgid ""
"Example:\n"
"   ./check_nagios -e 5 \\   -F /usr/local/nagios/var/status.log \\   -C /usr/"
"local/nagios/bin/nagios\n"
msgstr ""

#: plugins/check_nagios.c:309
#, c-format
msgid ""
"Usage: %s -F <status log file> -e <expire_minutes> -C <process_string>\n"
msgstr ""

#: plugins/check_nt.c:127
#, c-format
msgid "Wrong client version - running: %s, required: %s"
msgstr ""

#: plugins/check_nt.c:138 plugins/check_nt.c:198
msgid "missing -l parameters"
msgstr ""

#: plugins/check_nt.c:140
msgid "wrong -l parameter."
msgstr ""

#: plugins/check_nt.c:144
msgid "CPU Load"
msgstr ""

#: plugins/check_nt.c:145
msgid " "
msgstr ""

#: plugins/check_nt.c:167
#, c-format
msgid " %lu%% (%lu min average)"
msgstr ""

#: plugins/check_nt.c:169
#, c-format
msgid " '%lu min avg Load'=%lu%%;%lu;%lu;0;100"
msgstr ""

#: plugins/check_nt.c:179
msgid "not enough values for -l parameters"
msgstr ""

#: plugins/check_nt.c:191
#, c-format
msgid "System Uptime : %u day(s) %u hour(s) %u minute(s)"
msgstr ""

#: plugins/check_nt.c:200
msgid "wrong -l argument"
msgstr ""

#: plugins/check_nt.c:211
#, c-format
msgid "%s:\\ - total: %.2f Gb - used: %.2f Gb (%.0f%%) - free %.2f Gb (%.0f%%)"
msgstr ""

#: plugins/check_nt.c:214
#, c-format
msgid "'%s:\\ Used Space'=%.2fGb;%.2f;%.2f;0.00;%.2f"
msgstr ""

#: plugins/check_nt.c:228
msgid "Free disk space : Invalid drive "
msgstr ""

#: plugins/check_nt.c:238
msgid "No service/process specified"
msgstr ""

#: plugins/check_nt.c:242
msgid "ShowAll"
msgstr ""

#: plugins/check_nt.c:242
msgid "ShowFail"
msgstr ""

#: plugins/check_nt.c:262
#, c-format
msgid ""
"Memory usage: total:%.2f Mb - used: %.2f Mb (%.0f%%) - free: %.2f Mb (%.0f%%)"
msgstr ""

#: plugins/check_nt.c:265
#, c-format
msgid "'Memory usage'=%.2fMb;%.2f;%.2f;0.00;%.2f"
msgstr ""

#: plugins/check_nt.c:301 plugins/check_nt.c:383
msgid "No counter specified"
msgstr ""

#: plugins/check_nt.c:319
msgid "%"
msgstr ""

#: plugins/check_nt.c:334
msgid "Minimum value contains non-numbers"
msgstr ""

#: plugins/check_nt.c:338
msgid "Maximum value contains non-numbers"
msgstr ""

#: plugins/check_nt.c:345
msgid "No unit counter specified"
msgstr ""

#: plugins/check_nt.c:413
msgid "Please specify a variable to check"
msgstr ""

#: plugins/check_nt.c:500 plugins/check_nwstat.c:781
#: plugins/check_overcr.c:352
#, c-format
msgid ""
"Server port an integer (seconds)\n"
"Type '%s -h' for additional help\n"
msgstr ""

#: plugins/check_nt.c:553
msgid "None"
msgstr ""

#: plugins/check_nt.c:612
msgid ""
"Copyright (c) 2000 Yves Rubin (rubiyz@yahoo.com)\n"
"\n"
"This plugin collects data from the NSClient service running on a\n"
"Windows NT/2000/XP server.\n"
"\n"
msgstr ""

#: plugins/check_nt.c:617
#, c-format
msgid ""
"\n"
"Options:\n"
"-H, --hostname=HOST\n"
"  Name of the host to check\n"
"-p, --port=INTEGER\n"
"  Optional port number (default: %d)\n"
"-s <password>\n"
"  Password needed for the request\n"
"-w, --warning=INTEGER\n"
"  Threshold which will result in a warning status\n"
"-c, --critical=INTEGER\n"
"  Threshold which will result in a critical status\n"
"-t, --timeout=INTEGER\n"
"  Seconds before connection attempt times out (default: %d)\n"
"-h, --help\n"
"  Print this help screen\n"
"-V, --version\n"
"  Print version information\n"
msgstr ""

#: plugins/check_nt.c:635
msgid ""
"-v, --variable=STRING\n"
"  Variable to check.  Valid variables are:\n"
msgstr ""

#: plugins/check_nt.c:638
msgid ""
"   CLIENTVERSION = Get the NSClient version\n"
"     If -l <version> is specified, will return warning if versions differ.\n"
msgstr ""

#: plugins/check_nt.c:641
msgid ""
"   CPULOAD = Average CPU load on last x minutes.\n"
"     Request a -l parameter with the following syntax:\n"
"     -l <minutes range>,<warning threshold>,<critical threshold>.\n"
"     <minute range> should be less than 24*60.\n"
"     Thresholds are percentage and up to 10 requests can be done in one "
"shot.\n"
"     ie: -l 60,90,95,120,90,95\n"
msgstr ""

#: plugins/check_nt.c:648
msgid ""
"   UPTIME = Get the uptime of the machine.\n"
"     No specific parameters. No warning or critical threshold\n"
msgstr ""

#: plugins/check_nt.c:651
msgid ""
"   USEDDISKSPACE = Size and percentage of disk use.\n"
"     Request a -l parameter containing the drive letter only.\n"
"     Warning and critical thresholds can be specified with -w and -c.\n"
msgstr ""

#: plugins/check_nt.c:655
msgid ""
"   MEMUSE = Memory use.\n"
"     Warning and critical thresholds can be specified with -w and -c.\n"
msgstr ""

#: plugins/check_nt.c:658
msgid ""
"   SERVICESTATE = Check the state of one or several services.\n"
"     Request a -l parameters with the following syntax:\n"
"     -l <service1>,<service2>,<service3>,...\n"
"     You can specify -d SHOWALL in case you want to see working services\n"
"\t\t in the returned string.\n"
msgstr ""

#: plugins/check_nt.c:664
msgid ""
"   PROCSTATE = Check if one or several process are running.\n"
"     Same syntax as SERVICESTATE.\n"
msgstr ""

#: plugins/check_nt.c:667
#, c-format
msgid ""
"   COUNTER = Check any performance counter of Windows NT/2000.\n"
"     Request a -l parameters with the following syntax:\n"
"\t\t -l \"\\\\<performance object>\\\\counter\",\"<description>\n"
"     The <description> parameter is optional and \n"
"     is given to a printf output command which require a float parameters.\n"
"     Some examples:\n"
"       \"Paging file usage is %%.2f %%%%\"\n"
"       \"%%.f %%%% paging file used.\"\n"
msgstr ""

#: plugins/check_nt.c:676
msgid ""
"Notes:\n"
" - The NSClient service should be running on the server to get any "
"information\n"
"   (http://nsclient.ready2run.nl).\n"
" - Critical thresholds should be lower than warning thresholds\n"
msgstr ""

#: plugins/check_nt.c:687
#, c-format
msgid ""
"Usage: %s -H host -v variable [-p port] [-w warning] [-c critical]\n"
"  [-l params] [-d SHOWALL] [-t timeout]\n"
msgstr ""

#: plugins/check_nwstat.c:147
#, c-format
msgid "NetWare %s: "
msgstr ""

#: plugins/check_nwstat.c:178
#, c-format
msgid "Up %s,"
msgstr ""

#: plugins/check_nwstat.c:186
#, c-format
msgid "Load %s - %s %s-min load average = %lu%%"
msgstr ""

#: plugins/check_nwstat.c:207
#, c-format
msgid "Conns %s - %lu current connections"
msgstr ""

#: plugins/check_nwstat.c:226
#, c-format
msgid "%s: Long term cache hits = %lu%%"
msgstr ""

#: plugins/check_nwstat.c:245
#, c-format
msgid "%s: Total cache buffers = %lu"
msgstr ""

#: plugins/check_nwstat.c:264
#, c-format
msgid "%s: Dirty cache buffers = %lu"
msgstr ""

#: plugins/check_nwstat.c:283
#, c-format
msgid "%s: LRU sitting time = %lu minutes"
msgstr ""

#: plugins/check_nwstat.c:297 plugins/check_nwstat.c:322
#: plugins/check_nwstat.c:442 plugins/check_nwstat.c:463
#: plugins/check_nwstat.c:495 plugins/check_nwstat.c:516
#, c-format
msgid "Error: Volume '%s' does not exist!"
msgstr ""

#: plugins/check_nwstat.c:306
#, c-format
msgid "%s%lu KB free on volume %s"
msgstr ""

#: plugins/check_nwstat.c:307 plugins/check_nwstat.c:450
#: plugins/check_nwstat.c:503
msgid "Only "
msgstr ""

#: plugins/check_nwstat.c:342
#, c-format
msgid "%lu MB (%lu%%) free on volume %s"
msgstr ""

#: plugins/check_nwstat.c:361
#, c-format
msgid "Directory Services Database is %s (DS version %s)"
msgstr ""

#: plugins/check_nwstat.c:375
#, c-format
msgid "Logins are %s"
msgstr ""

#: plugins/check_nwstat.c:375
msgid "enabled"
msgstr ""

#: plugins/check_nwstat.c:375
msgid "disabled"
msgstr ""

#: plugins/check_nwstat.c:408
#, c-format
msgid "%lu of %lu (%lu%%) packet receive buffers used"
msgstr ""

#: plugins/check_nwstat.c:429
#, c-format
msgid "%lu entries in SAP table"
msgstr ""

#: plugins/check_nwstat.c:431
#, c-format
msgid "%lu entries in SAP table for SAP type %d"
msgstr ""

#: plugins/check_nwstat.c:450
#, c-format
msgid "%s%lu KB purgeable on volume %s"
msgstr ""

#: plugins/check_nwstat.c:483
#, c-format
msgid "%lu MB (%lu%%) purgeable on volume %s"
msgstr ""

#: plugins/check_nwstat.c:503
#, c-format
msgid "%s%lu KB not yet purgeable on volume %s"
msgstr ""

#: plugins/check_nwstat.c:536
#, c-format
msgid "%lu MB (%lu%%) not yet purgeable on volume %s"
msgstr ""

#: plugins/check_nwstat.c:554
#, c-format
msgid "%lu open files"
msgstr ""

#: plugins/check_nwstat.c:571
#, c-format
msgid "%lu abended threads"
msgstr ""

#: plugins/check_nwstat.c:596
#, c-format
msgid "%lu current service processes (%lu max)"
msgstr ""

#: plugins/check_nwstat.c:612
msgid "Critical: Time not in sync with network!"
msgstr ""

#: plugins/check_nwstat.c:615
msgid "OK! Time in sync with network!"
msgstr ""

#: plugins/check_nwstat.c:631
#, c-format
msgid "LRU sitting time = %lu seconds"
msgstr ""

#: plugins/check_nwstat.c:647
#, c-format
msgid "dirty cache buffers = %lu%% of the total"
msgstr ""

#: plugins/check_nwstat.c:662
#, c-format
msgid "total cache buffers = %lu%% of the original"
msgstr ""

#: plugins/check_nwstat.c:672
#, c-format
msgid "NDS Version %s"
msgstr ""

#: plugins/check_nwstat.c:681
#, c-format
msgid "Up %s"
msgstr ""

#: plugins/check_nwstat.c:691
#, c-format
msgid "Module %s version %s is loaded"
msgstr ""

#: plugins/check_nwstat.c:694
#, c-format
msgid "Module %s is not loaded"
msgstr ""

#: plugins/check_nwstat.c:699 plugins/check_overcr.c:270
msgid "Nothing to check!\n"
msgstr ""

#: plugins/check_nwstat.c:912
#, c-format
msgid ""
"Usage: %s This plugin attempts to contact the MRTGEXT NLM running\n"
"on a Novell server to gather the requested system information.\n"
"\n"
msgstr ""

#: plugins/check_nwstat.c:923
msgid ""
" -v, --variable=STRING\n"
"    Variable to check.  Valid variables include:\n"
"      LOAD1     = 1 minute average CPU load\n"
"      LOAD5     = 5 minute average CPU load\n"
"      LOAD15    = 15 minute average CPU load\n"
"      CSPROCS   = number of current service processes (NW 5.x only)\n"
"      ABENDS    = number of abended threads (NW 5.x only)\n"
"      UPTIME    = server uptime\n"
msgstr ""

#: plugins/check_nwstat.c:933
msgid ""
"      LTCH      = percent long term cache hits\n"
"      CBUFF     = current number of cache buffers\n"
"      CDBUFF    = current number of dirty cache buffers\n"
"      DCB       = dirty cache buffers as a percentage of the total\n"
"      TCB       = dirty cache buffers as a percentage of the original\n"
msgstr ""

#: plugins/check_nwstat.c:940
msgid ""
"      OFILES    = number of open files\n"
"      VPF<vol>  = percent free space on volume <vol>\n"
"      VKF<vol>  = KB of free space on volume <vol>\n"
"      VPP<vol>  = percent purgeable space on volume <vol>\n"
"      VKP<vol>  = KB of purgeable space on volume <vol>\n"
"      VPNP<vol> = percent not yet purgeable space on volume <vol>\n"
"      VKNP<vol> = KB of not yet purgeable space on volume <vol>\n"
msgstr ""

#: plugins/check_nwstat.c:949
msgid ""
"      LRUM      = LRU sitting time in minutes\n"
"      LRUS      = LRU sitting time in seconds\n"
"      DSDB      = check to see if DS Database is open\n"
"      DSVER     = NDS version\n"
"      UPRB      = used packet receive buffers\n"
"      PUPRB     = percent (of max) used packet receive buffers\n"
"      SAPENTRIES = number of entries in the SAP table\n"
"      SAPENTRIES<n> = number of entries in the SAP table for SAP type <n>\n"
msgstr ""

#: plugins/check_nwstat.c:959
msgid ""
"      TSYNC     = timesync status \n"
"      LOGINS    = check to see if logins are enabled\n"
"      CONNS     = number of currently licensed connections\n"
"      NLM:<nlm> = check if NLM is loaded and report version\n"
"                  (e.g. \"NLM:TSANDS.NLM\")\n"
msgstr ""

#: plugins/check_nwstat.c:966
msgid ""
" -w, --warning=INTEGER\n"
"    Threshold which will result in a warning status\n"
" -c, --critical=INTEGER\n"
"    Threshold which will result in a critical status\n"
" -o, --osversion\n"
"    Include server version string in results\n"
msgstr ""

#: plugins/check_nwstat.c:976
msgid ""
"\n"
"Notes:\n"
"- This plugin requres that the MRTGEXT.NLM file from James Drews' MRTG\n"
"  extension for NetWare be loaded on the Novell servers you wish to check.\n"
"  (available from http://www.engr.wisc.edu/~drews/mrtg/)\n"
"- Values for critical thresholds should be lower than warning thresholds\n"
"  when the following variables are checked: VPF, VKF, LTCH, CBUFF, DCB, \n"
"  TCB, LRUS and LRUM.\n"
msgstr ""

#: plugins/check_nwstat.c:993
#, c-format
msgid ""
"Usage: %s -H host [-p port] [-v variable] [-w warning] [-c critical]\n"
"  [-t timeout].\n"
msgstr ""

#: plugins/check_overcr.c:108
msgid "Unknown error fetching load data\n"
msgstr ""

#: plugins/check_overcr.c:112
msgid "Invalid response from server - no load information\n"
msgstr ""

#: plugins/check_overcr.c:118
msgid "Invalid response from server after load 1\n"
msgstr ""

#: plugins/check_overcr.c:124
msgid "Invalid response from server after load 5\n"
msgstr ""

#: plugins/check_overcr.c:149
#, c-format
msgid "Load %s - %s-min load average = %0.2f"
msgstr ""

#: plugins/check_overcr.c:159
msgid "Unknown error fetching disk data\n"
msgstr ""

#: plugins/check_overcr.c:169 plugins/check_overcr.c:221
#: plugins/check_overcr.c:225
msgid "Invalid response from server\n"
msgstr ""

#: plugins/check_overcr.c:196
msgid "Unknown error fetching network status\n"
msgstr ""

#: plugins/check_overcr.c:206
#, c-format
msgid "Net %s - %d connection%s on port %d"
msgstr ""

#: plugins/check_overcr.c:217
msgid "Unknown error fetching process status\n"
msgstr ""

#: plugins/check_overcr.c:235
#, c-format
msgid "Process %s - %d instance%s of %s running"
msgstr ""

#: plugins/check_overcr.c:262
#, c-format
msgid "Uptime %s - Up %d days %d hours %d minutes"
msgstr ""

#: plugins/check_overcr.c:408
#, c-format
msgid ""
"Usage: %s -H host [-p port] [-v variable] [-w warning] [-c critical]\n"
"  [-t timeout]\n"
msgstr ""

#: plugins/check_overcr.c:426
msgid ""
"This plugin attempts to contact the Over-CR collector daemon running on the\n"
"remote UNIX server in order to gather the requested system information.\n"
"\n"
msgstr ""

#: plugins/check_overcr.c:436
msgid ""
"-v, --variable=STRING\n"
"   Variable to check.  Valid variables include:\n"
"     LOAD1         = 1 minute average CPU load\n"
"     LOAD5         = 5 minute average CPU load\n"
"     LOAD15        = 15 minute average CPU load\n"
"     DPU<filesys>  = percent used disk space on filesystem <filesys>\n"
"     PROC<process> = number of running processes with name <process>\n"
"     NET<port>     = number of active connections on TCP port <port>\n"
"     UPTIME        = system uptime in seconds\n"
msgstr ""

#: plugins/check_overcr.c:447
msgid ""
" -w, --warning=INTEGER\n"
"   Threshold which will result in a warning status\n"
" -c, --critical=INTEGER\n"
"   Threshold which will result in a critical status\n"
msgstr ""

#: plugins/check_overcr.c:455
msgid ""
"Notes:\n"
" - For the available options, the critical threshold value should always be\n"
"   higher than the warning threshold value, EXCEPT with the uptime variable\n"
"\n"
msgstr ""

#: plugins/check_overcr.c:460
msgid ""
" - This plugin requres that Eric Molitors' Over-CR collector daemon be\n"
"   running on the remote server. Over-CR can be downloaded from\n"
"   http://www.molitor.org/overcr (This plugin was tested with version\n"
"   0.99.53 of the Over-CR collector)\n"
"\n"
msgstr ""

#: plugins/check_pgsql.c:154
#, c-format
msgid "PGSQL: CRITICAL - no connection to '%s' (%s).\n"
msgstr ""

#: plugins/check_pgsql.c:169
#, c-format
msgid "PGSQL: %s - database %s (%d sec.)|%s\n"
msgstr ""

#: plugins/check_pgsql.c:219 plugins/check_snmp.c:449 plugins/negate.c:183
msgid "Timeout Interval must be an integer"
msgstr ""

#: plugins/check_pgsql.c:225 plugins/check_pgsql.c:231
msgid "Invalid critical threshold"
msgstr ""

#: plugins/check_pgsql.c:237
msgid "You gave an invalid host name"
msgstr ""

#: plugins/check_pgsql.c:243
msgid "Port must be an integer"
msgstr ""

#: plugins/check_pgsql.c:249
msgid "Database name is not valid"
msgstr ""

#: plugins/check_pgsql.c:255
msgid "user name is not valid"
msgstr ""

#: plugins/check_pgsql.c:389
msgid ""
"Test whether a PostgreSQL DBMS is accepting connections.\n"
"\n"
msgstr ""

#: plugins/check_ping.c:82
msgid "Could not parse arguments"
msgstr ""

#: plugins/check_ping.c:124
msgid "Error: Could not interpret output from ping command\n"
msgstr ""

#: plugins/check_ping.c:140
#, c-format
msgid "PING %s - %sPacket loss = %d%%"
msgstr ""

#: plugins/check_ping.c:143
#, c-format
msgid "PING %s - %sPacket loss = %d%%, RTA = %2.2f ms"
msgstr ""

#: plugins/check_ping.c:235
msgid "Could not realloc() addresses\n"
msgstr ""

#: plugins/check_ping.c:250 plugins/check_ping.c:331
#, c-format
msgid "<max_packets> (%s) must be a non-negative number\n"
msgstr ""

#: plugins/check_ping.c:273
#, c-format
msgid ""
"Invalid host name/address: %s\n"
"\n"
msgstr ""

#: plugins/check_ping.c:285
#, c-format
msgid "<wpl> (%s) must be an integer percentage\n"
msgstr ""

#: plugins/check_ping.c:296
#, c-format
msgid "<cpl> (%s) must be an integer percentage\n"
msgstr ""

#: plugins/check_ping.c:307
#, c-format
msgid "<wrta> (%s) must be a non-negative number\n"
msgstr ""

#: plugins/check_ping.c:318
#, c-format
msgid "<crta> (%s) must be a non-negative number\n"
msgstr ""

#: plugins/check_ping.c:349
#, c-format
msgid ""
"%s: Warning threshold must be integer or percentage!\n"
"\n"
msgstr ""

#: plugins/check_ping.c:360
msgid "<wrta> was not set\n"
msgstr ""

#: plugins/check_ping.c:364
msgid "<crta> was not set\n"
msgstr ""

#: plugins/check_ping.c:368
msgid "<wpl> was not set\n"
msgstr ""

#: plugins/check_ping.c:372
msgid "<cpl> was not set\n"
msgstr ""

#: plugins/check_ping.c:376
#, c-format
msgid "<wrta> (%f) cannot be larger than <crta> (%f)\n"
msgstr ""

#: plugins/check_ping.c:380
#, c-format
msgid "<wpl> (%d) cannot be larger than <cpl> (%d)\n"
msgstr ""

#: plugins/check_ping.c:393
msgid "Invalid host name/address"
msgstr ""

#: plugins/check_ping.c:411
#, c-format
msgid "Cannot open pipe: %s"
msgstr ""

#: plugins/check_ping.c:415
#, c-format
msgid "Cannot open stderr for %s\n"
msgstr ""

#: plugins/check_ping.c:471
#, c-format
msgid "PING CRITICAL - Network unreachable (%s)"
msgstr ""

#: plugins/check_ping.c:473
#, c-format
msgid "PING CRITICAL - Host Unreachable (%s)"
msgstr ""

#: plugins/check_ping.c:475
#, c-format
msgid "PING CRITICAL - Host not found (%s)"
msgstr ""

#: plugins/check_ping.c:482
msgid "unable to realloc warn_text"
msgstr ""

#: plugins/check_ping.c:508 plugins/check_procs.c:582
msgid "Copyright (c) 1999 Ethan Galstad <nagios@nagios.org>"
msgstr ""

#: plugins/check_ping.c:511
msgid ""
"Use ping to check connection statistics for a remote host.\n"
"\n"
msgstr ""

#: plugins/check_ping.c:519
#, c-format
msgid ""
"-H, --hostname=HOST\n"
"   host to ping\n"
"-w, --warning=THRESHOLD\n"
"   warning threshold pair\n"
"-c, --critical=THRESHOLD\n"
"   critical threshold pair\n"
"-p, --packets=INTEGER\n"
"   number of ICMP ECHO packets to send (Default: %d)\n"
"-L, --link\n"
"   show HTML in the plugin output (obsoleted by urlize)\n"
msgstr ""

#: plugins/check_ping.c:534
#, c-format
msgid ""
"THRESHOLD is <rta>,<pl>%% where <rta> is the round trip average travel\n"
"time (ms) which triggers a WARNING or CRITICAL state, and <pl> is the\n"
"percentage of packet loss to trigger an alarm state.\n"
"\n"
msgstr ""

#: plugins/check_ping.c:539
msgid ""
"This plugin uses the ping command to probe the specified host for packet "
"loss\n"
"(percentage) and round trip average (milliseconds). It can produce HTML "
"output\n"
"linking to a traceroute CGI contributed by Ian Cass. The CGI can be found "
"in\n"
"the contrib area of the downloads section at http://www.nagios.org\n"
"\n"
msgstr ""

#: plugins/check_procs.c:120
msgid "Unable to parse command line\n"
msgstr ""

#: plugins/check_procs.c:123
#, c-format
msgid "CMD: %s\n"
msgstr ""

#: plugins/check_procs.c:229
#, c-format
msgid "Not parseable: %s"
msgstr ""

#: plugins/check_procs.c:236
#, c-format
msgid "STDERR: %s"
msgstr ""

#: plugins/check_procs.c:238
msgid "System call sent warnings to stderr\n"
msgstr ""

#: plugins/check_procs.c:245
msgid "System call returned nonzero status\n"
msgstr ""

#: plugins/check_procs.c:250 plugins/check_users.c:99
msgid "Unable to read output\n"
msgstr ""

#: plugins/check_procs.c:267
#, c-format
msgid "%d warn out of "
msgstr ""

#: plugins/check_procs.c:272
#, c-format
msgid "%d crit, %d warn out of "
msgstr ""

#: plugins/check_procs.c:275
#, c-format
msgid "%d process"
msgid_plural "%d processes"
msgstr[0] ""
msgstr[1] ""

#: plugins/check_procs.c:278
#, c-format
msgid " with %s"
msgstr ""

#: plugins/check_procs.c:342 plugins/check_ssh.c:117
msgid ""
"Timeout Interval must be an integer!\n"
"\n"
msgstr ""

#: plugins/check_procs.c:356
msgid ""
"Critical Process Count must be an integer!\n"
"\n"
msgstr ""

#: plugins/check_procs.c:368
msgid ""
"Warning Process Count must be an integer!\n"
"\n"
msgstr ""

#: plugins/check_procs.c:376
#, c-format
msgid ""
"%s: Parent Process ID must be an integer!\n"
"\n"
msgstr ""

#: plugins/check_procs.c:382 plugins/check_procs.c:480
#, c-format
msgid "%s%sSTATE = %s"
msgstr ""

#: plugins/check_procs.c:391
#, c-format
msgid "UID %s was not found\n"
msgstr ""

#: plugins/check_procs.c:397
#, c-format
msgid "User name %s was not found\n"
msgstr ""

#: plugins/check_procs.c:402
#, c-format
msgid "%s%sUID = %d (%s)"
msgstr ""

#: plugins/check_procs.c:411
#, c-format
msgid "%s%scommand name '%s'"
msgstr ""

#: plugins/check_procs.c:420
#, c-format
msgid "%s%sargs '%s'"
msgstr ""

#: plugins/check_procs.c:425
#, c-format
msgid "%s%sRSS >= %d"
msgstr ""

#: plugins/check_procs.c:429
#, c-format
msgid ""
"%s: RSS must be an integer!\n"
"\n"
msgstr ""

#: plugins/check_procs.c:432
#, c-format
msgid "%s%sVSZ >= %d"
msgstr ""

#: plugins/check_procs.c:436
#, c-format
msgid ""
"%s: VSZ must be an integer!\n"
"\n"
msgstr ""

#: plugins/check_procs.c:440
#, c-format
msgid "%s%sPCPU >= %.2f"
msgstr ""

#: plugins/check_procs.c:444
#, c-format
msgid ""
"%s: PCPU must be a float!\n"
"\n"
msgstr ""

#: plugins/check_procs.c:463
#, c-format
msgid ""
"%s: metric must be one of PROCS, VSZ, RSS, CPU!\n"
"\n"
msgstr ""

#: plugins/check_procs.c:500
#, c-format
msgid "wmax (%d) cannot be greater than cmax (%d)\n"
msgstr ""

#: plugins/check_procs.c:504
#, c-format
msgid "wmin (%d) cannot be less than cmin (%d)\n"
msgstr ""

#: plugins/check_procs.c:585
msgid ""
"Checks all processes and generates WARNING or CRITICAL states if the "
"specified\n"
"metric is outside the required threshold ranges. The metric defaults to "
"number\n"
"of processes.  Search filters can be applied to limit the processes to "
"check.\n"
"\n"
msgstr ""

#: plugins/check_procs.c:592
msgid ""
"\n"
"Required Arguments:\n"
" -w, --warning=RANGE\n"
"   Generate warning state if metric is outside this range\n"
" -c, --critical=RANGE\n"
"   Generate critical state if metric is outside this range\n"
msgstr ""

#: plugins/check_procs.c:599
msgid ""
"\n"
"Optional Arguments:\n"
" -m, --metric=TYPE\n"
"   Check thresholds against metric. Valid types:\n"
"   PROCS - number of processes (default)\n"
"   VSZ  - virtual memory size\n"
"   RSS  - resident set memory size\n"
"   CPU  - percentage cpu\n"
" -v, --verbose\n"
"   Extra information. Up to 3 verbosity levels\n"
msgstr ""

#: plugins/check_procs.c:610
msgid ""
"\n"
"Optional Filters:\n"
" -s, --state=STATUSFLAGS\n"
"   Only scan for processes that have, in the output of `ps`, one or\n"
"   more of the status flags you specify (for example R, Z, S, RS,\n"
"   RSZDT, plus others based on the output of your 'ps' command).\n"
" -p, --ppid=PPID\n"
"   Only scan for children of the parent process ID indicated.\n"
" -z, --vsz=VSZ\n"
"   Only scan for processes with vsz higher than indicated.\n"
" -r, --rss=RSS\n"
"   Only scan for processes with rss higher than indicated.\n"
msgstr ""

#: plugins/check_procs.c:623
msgid ""
" -P, --pcpu=PCPU\n"
"   Only scan for processes with pcpu higher than indicated.\n"
" -u, --user=USER\n"
"   Only scan for processes with user name or ID indicated.\n"
" -a, --argument-array=STRING\n"
"   Only scan for processes with args that contain STRING.\n"
" -C, --command=COMMAND\n"
"   Only scan for exact matches of COMMAND (without path).\n"
msgstr ""

#: plugins/check_procs.c:633
msgid ""
"\n"
"RANGEs are specified 'min:max' or 'min:' or ':max' (or 'max'). If\n"
"specified 'max:min', a warning status will be generated if the\n"
"count is inside the specified range\n"
"\n"
msgstr ""

#: plugins/check_procs.c:638
msgid ""
"This plugin checks the number of currently running processes and\n"
"generates WARNING or CRITICAL states if the process count is outside\n"
"the specified threshold ranges. The process count can be filtered by\n"
"process owner, parent process PID, current state (e.g., 'Z'), or may\n"
"be the total number of running processes\n"
"\n"
msgstr ""

#: plugins/check_procs.c:645
msgid ""
"Examples:\n"
" check_procs -w 2:2 -c 2:1024 -C portsentry\n"
"   Warning if not two processes with command name portsentry. Critical\n"
"   if < 2 or > 1024 processes\n"
"\n"
" check_procs -w 10 -a '/usr/local/bin/perl' -u root\n"
"   Warning alert if > 10 processes with command arguments containing \n"
"   '/usr/local/bin/perl' and owned by root\n"
"\n"
" check_procs -w 50000 -c 100000 --metric=VSZ\n"
"   Alert if vsz of any processes over 50K or 100K\n"
" check_procs -w 10 -c 20 --metric=CPU\n"
"   Alert if cpu of any processes over 10% or 20%\n"
"\n"
msgstr ""

#: plugins/check_radius.c:117
msgid "Config file error"
msgstr ""

#: plugins/check_radius.c:125
msgid "Out of Memory?"
msgstr ""

#: plugins/check_radius.c:146
msgid "Timeout"
msgstr ""

#: plugins/check_radius.c:148
msgid "Auth Error"
msgstr ""

#: plugins/check_radius.c:150
msgid "Auth Failed"
msgstr ""

#: plugins/check_radius.c:154
msgid "Auth OK"
msgstr ""

#: plugins/check_radius.c:193 plugins/check_radius.c:267
msgid "Timeout interval must be a positive integer"
msgstr ""

#: plugins/check_radius.c:197 plugins/check_radius.c:261
msgid "Number of retries must be a positive integer"
msgstr ""

#: plugins/check_radius.c:202 plugins/check_radius.c:240
msgid "Server port must be a positive integer"
msgstr ""

#: plugins/check_radius.c:287
msgid "Copyright (c) 1999 Robert August Vincent II\n"
msgstr ""

#: plugins/check_radius.c:290
msgid ""
"Tests to see if a radius server is accepting connections.\n"
"\n"
msgstr ""

#: plugins/check_radius.c:298
msgid ""
" -u, --username=STRING\n"
"    The user to authenticate\n"
" -p, --password=STRING\n"
"    Password for autentication (SECURITY RISK)\n"
" -n, --nas-id=STRING\n"
"    NAS identifier\n"
" -F, --filename=STRING\n"
"    Configuration file\n"
" -e, --expect=STRING\n"
"    Response string to expect from the server\n"
" -r, --retries=INTEGER\n"
"    Number of times to retry a failed connection\n"
msgstr ""

#: plugins/check_radius.c:314
msgid ""
"\n"
"This plugin tests a radius server to see if it is accepting connections.\n"
"\n"
"The server to test must be specified in the invocation, as well as a user\n"
"name and password. A configuration file may also be present. The format of\n"
"the configuration file is described in the radiusclient library sources.\n"
"\n"
msgstr ""

#: plugins/check_radius.c:321
msgid ""
"The password option presents a substantial security issue because the\n"
"password can be determined by careful watching of the command line in\n"
"a process listing.  This risk is exacerbated because nagios will\n"
"run the plugin at regular prdictable intervals.  Please be sure that\n"
"the password used does not allow access to sensitive system resources,\n"
"otherwise compormise could occur.\n"
msgstr ""

#: plugins/check_real.c:80
#, c-format
msgid "Unable to connect to %s on port %d\n"
msgstr ""

#: plugins/check_real.c:102
#, c-format
msgid "No data received from %s\n"
msgstr ""

#: plugins/check_real.c:107 plugins/check_real.c:180
msgid "Invalid REAL response received from host\n"
msgstr ""

#: plugins/check_real.c:109 plugins/check_real.c:182
#, c-format
msgid "Invalid REAL response received from host on port %d\n"
msgstr ""

#: plugins/check_real.c:173 plugins/check_tcp.c:275
msgid "No data received from host\n"
msgstr ""

#: plugins/check_real.c:236
#, c-format
msgid "REAL %s - %d second response time\n"
msgstr ""

#: plugins/check_real.c:319 plugins/check_smtp.c:301 plugins/check_tcp.c:463
msgid "Server port must be a positive integer\n"
msgstr ""

#: plugins/check_real.c:328 plugins/check_smtp.c:345
msgid "Warning time must be a nonnegative integer\n"
msgstr ""

#: plugins/check_real.c:337 plugins/check_smtp.c:336
msgid "Critical time must be a nonnegative integer\n"
msgstr ""

#: plugins/check_real.c:348 plugins/check_smtp.c:356
msgid "Time interval must be a nonnegative integer\n"
msgstr ""

#: plugins/check_real.c:373
msgid "You must provide a server to check\n"
msgstr ""

#: plugins/check_real.c:406
msgid "Copyright (c) 1999 Pedro Leite <leite@cic.ua.pt>\n"
msgstr ""

#: plugins/check_real.c:409
#, fuzzy
msgid ""
"This plugin tests the REAL service on the specified host.\n"
"\n"
msgstr "Le plugin tests a %s connection with l'host specified\n"

#: plugins/check_real.c:417
#, c-format
msgid ""
" -u, --url=STRING\n"
"   Connect to this url\n"
" -e, --expect=STRING\n"
"   String to expect in first line of server response (default: %s)\n"
msgstr ""

#: plugins/check_real.c:430
msgid ""
"This plugin will attempt to open an RTSP connection with the host.\n"
"Successul connects return STATE_OK, refusals and timeouts return\n"
"STATE_CRITICAL, other errors return STATE_UNKNOWN.  Successful connects,\n"
"but incorrect reponse messages from the host result in STATE_WARNING return\n"
"values."
msgstr ""

#: plugins/check_smtp.c:126
msgid "recv() failed\n"
msgstr ""

#: plugins/check_smtp.c:137
msgid "Invalid SMTP response received from host\n"
msgstr ""

#: plugins/check_smtp.c:139
#, c-format
msgid "Invalid SMTP response received from host on port %d\n"
msgstr ""

#: plugins/check_smtp.c:183 plugins/check_snmp.c:512
msgid "Could Not Compile Regular Expression"
msgstr ""

#: plugins/check_smtp.c:192 plugins/check_smtp.c:202
#, c-format
msgid "SMTP %s - Invalid response '%s' to command '%s'\n"
msgstr ""

#: plugins/check_smtp.c:196 plugins/check_snmp.c:278
#, c-format
msgid "Execute Error: %s\n"
msgstr ""

#: plugins/check_smtp.c:227
#, c-format
msgid "SMTP %s - %.3f sec. response time%s%s|%s\n"
msgstr ""

#: plugins/check_smtp.c:315 plugins/check_smtp.c:325 plugins/check_snmp.c:568
#, c-format
msgid "Could not realloc() units [%d]\n"
msgstr ""

#: plugins/check_smtp.c:428
msgid "Copyright (c) 1999-2001 Ethan Galstad <nagios@nagios.org>\n"
msgstr ""

#: plugins/check_smtp.c:431
#, fuzzy
msgid ""
"This plugin will attempt to open an SMTP connection with the host.\n"
"\n"
msgstr "Le plugin tests a %s connection with l'host specified\n"

#: plugins/check_smtp.c:442
#, c-format
msgid ""
" -e, --expect=STRING\n"
"   String to expect in first line of server response (default: '%s')\n"
" -n, nocommand\n"
"   Suppress SMTP command\n"
" -C, --command=STRING\n"
"   SMTP command (may be used repeatedly)\n"
" -R, --command=STRING\n"
"   Expected response to command (may be used repeatedly)\n"
" -f, --from=STRING\n"
"   FROM-address to include in MAIL command, required by Exchange 2000\n"
msgstr ""

#: plugins/check_smtp.c:461
msgid ""
"\n"
"Successul connects return STATE_OK, refusals and timeouts return\n"
"STATE_CRITICAL, other errors return STATE_UNKNOWN.  Successful\n"
"connects, but incorrect reponse messages from the host result in\n"
"STATE_WARNING return values.\n"
msgstr ""

#: plugins/check_snmp.c:285 plugins/check_snmp.c:518
#, c-format
msgid "%s UNKNOWN: call for regex which was not a compiled option"
msgstr ""

#: plugins/check_snmp.c:322 plugins/negate.c:108
#, c-format
msgid ""
"%s problem - No data received from host\n"
"CMD: %s\n"
msgstr ""

#: plugins/check_snmp.c:457
#, c-format
msgid "Invalid critical threshold: %s\n"
msgstr ""

#: plugins/check_snmp.c:468
#, c-format
msgid "Invalid warning threshold: %s\n"
msgstr ""

#: plugins/check_snmp.c:538
#, c-format
msgid "Could not realloc() labels[%d]"
msgstr ""

#: plugins/check_snmp.c:550
msgid "Could not realloc() labels\n"
msgstr ""

#: plugins/check_snmp.c:580
msgid "Could not realloc() units\n"
msgstr ""

#: plugins/check_snmp.c:653
#, c-format
msgid ""
"Missing secname (%s) or authpassword (%s) ! \n"
")"
msgstr ""

#: plugins/check_snmp.c:671
#, c-format
msgid "Invalid SNMP version: %s\n"
msgstr ""

#: plugins/check_snmp.c:864
msgid ""
"Check status of remote machines and obtain sustem information via SNMP\n"
"\n"
msgstr ""

#: plugins/check_snmp.c:874
msgid ""
" -P, --protocol=[1|3]\n"
"    SNMP protocol version\n"
" -L, --seclevel=[noAuthNoPriv|authNoPriv|authPriv]\n"
"    SNMPv3 securityLevel\n"
" -a, --authproto=[MD5|SHA]\n"
"    SNMPv3 auth proto\n"
msgstr ""

#: plugins/check_snmp.c:883
#, c-format
msgid ""
" -C, --community=STRING\n"
"    Optional community string for SNMP communication\n"
"    (default is \"%s\")\n"
" -U, --secname=USERNAME\n"
"    SNMPv3 username\n"
" -A, --authpassword=PASSWORD\n"
"    SNMPv3 authentication password\n"
" -X, --privpasswd=PASSWORD\n"
"    SNMPv3 crypt passwd (DES)\n"
msgstr ""

#: plugins/check_snmp.c:895
#, c-format
msgid ""
" -o, --oid=OID(s)\n"
"    Object identifier(s) whose value you wish to query\n"
" -m, --miblist=STRING\n"
"    List of MIBS to be loaded (default = ALL)\n"
" -d, --delimiter=STRING\n"
"    Delimiter to use when parsing returned data. Default is \"%s\"\n"
"    Any data on the right hand side of the delimiter is considered\n"
"    to be the data that should be used in the evaluation.\n"
msgstr ""

#: plugins/check_snmp.c:905
msgid ""
" -w, --warning=INTEGER_RANGE(s)\n"
"    Range(s) which will not result in a WARNING status\n"
" -c, --critical=INTEGER_RANGE(s)\n"
"    Range(s) which will not result in a CRITICAL status\n"
msgstr ""

#: plugins/check_snmp.c:912
msgid ""
" -s, --string=STRING\n"
"    Return OK state (for that OID) if STRING is an exact match\n"
" -r, --ereg=REGEX\n"
"    Return OK state (for that OID) if extended regular expression REGEX "
"matches\n"
" -R, --eregi=REGEX\n"
"    Return OK state (for that OID) if case-insensitive extended REGEX "
"matches\n"
" -l, --label=STRING\n"
"    Prefix label for output from plugin (default -s 'SNMP')\n"
msgstr ""

#: plugins/check_snmp.c:923
msgid ""
" -u, --units=STRING\n"
"    Units label(s) for output data (e.g., 'sec.').\n"
" -D, --output-delimiter=STRING\n"
"    Separates output on multiple OID requests\n"
msgstr ""

#: plugins/check_snmp.c:933
msgid ""
"\n"
"- This plugin uses the 'snmpget' command included with the NET-SNMP "
"package.\n"
"  If you don't have the package installed, you will need to download it "
"from\n"
"  http://net-snmp.sourceforge.net before you can use this plugin.\n"
msgstr ""

#: plugins/check_snmp.c:938
msgid ""
"- Multiple OIDs may be indicated by a comma- or space-delimited list (lists "
"with\n"
"  internal spaces must be quoted) [max 8 OIDs]\n"
msgstr ""

#: plugins/check_snmp.c:942
msgid ""
"- Ranges are inclusive and are indicated with colons. When specified as\n"
"  'min:max' a STATE_OK will be returned if the result is within the "
"indicated\n"
"  range or is equal to the upper or lower bound. A non-OK state will be\n"
"  returned if the result is outside the specified range.\n"
msgstr ""

#: plugins/check_snmp.c:948
msgid ""
"- If specified in the order 'max:min' a non-OK state will be returned if "
"the\n"
"  result is within the (inclusive) range.\n"
msgstr ""

#: plugins/check_snmp.c:952
msgid ""
"- Upper or lower bounds may be omitted to skip checking the respective "
"limit.\n"
"- Bare integers are interpreted as upper limits.\n"
"- When checking multiple OIDs, separate ranges by commas like '-w "
"1:10,1:,:20'\n"
"- Note that only one string and one regex may be checked at present\n"
"- All evaluation methods other than PR, STR, and SUBSTR expect that the "
"value\n"
"  returned from the SNMP query is an unsigned integer.\n"
msgstr ""

#: plugins/check_snmp.c:966
#, c-format
msgid ""
"Usage: %s -H <ip_address> -o <OID> [-w warn_range] [-c crit_range] \n"
"  [-C community] [-s string] [-r regex] [-R regexi] [-t timeout]\n"
"  [-l label] [-u units] [-p port-number] [-d delimiter]\n"
"  [-D output-delimiter] [-m miblist] [-P snmp version]\n"
"  [-L seclevel] [-U secname] [-a authproto] [-A authpasswd]\n"
"  [-X privpasswd]\n"
msgstr ""

#: plugins/check_ssh.c:207
#, c-format
msgid "Server answer: %s"
msgstr ""

#: plugins/check_ssh.c:218
#, c-format
msgid "SSH OK - %s (protocol %s)\n"
msgstr ""

#: plugins/check_ssh.c:236
msgid "Copyright (c) 1999 Remi Paulmier <remi@sinfomic.fr>\n"
msgstr ""

#: plugins/check_ssh.c:239
msgid ""
"Try to connect to SSH server at specified server and port\n"
"\n"
msgstr ""

#: plugins/check_ssh.c:259
#, c-format
msgid "Usage: %s [-46] [-t <timeout>] [-p <port>] <host>\n"
msgstr ""

#: plugins/check_swap.c:145
#, c-format
msgid "Command: %s\n"
msgstr ""

#: plugins/check_swap.c:147
#, c-format
msgid "Format: %s\n"
msgstr ""

#: plugins/check_swap.c:183
#, c-format
msgid "total=%d, used=%d, free=%d\n"
msgstr ""

#: plugins/check_swap.c:197
#, c-format
msgid "total=%d, free=%d\n"
msgstr ""

#: plugins/check_swap.c:314
#, c-format
msgid " %d%% free (%llu MB out of %llu MB)"
msgstr ""

#: plugins/check_swap.c:464
msgid "Warning percentage should be more than critical percentage\n"
msgstr ""

#: plugins/check_swap.c:468
msgid "Warning free space should be more than critical free space\n"
msgstr ""

#: plugins/check_swap.c:485
msgid ""
"Check swap space on local server.\n"
"\n"
msgstr ""

#: plugins/check_swap.c:491
#, c-format
msgid ""
"\n"
" -w, --warning=INTEGER\n"
"   Exit with WARNING status if less than INTEGER bytes of swap space are "
"free\n"
" -w, --warning=PERCENT%%\n"
"   Exit with WARNING status if less than PERCENT of swap space is free\n"
" -c, --critical=INTEGER\n"
"   Exit with CRITICAL status if less than INTEGER bytes of swap space are "
"free\n"
" -c, --critical=PERCENT%%\n"
"   Exit with CRITCAL status if less than PERCENT of swap space is free\n"
" -a, --allswaps\n"
"    Conduct comparisons for all swap partitions, one by one\n"
" -v, --verbose\n"
"    Verbose output. Up to 3 levels\n"
msgstr ""

#: plugins/check_swap.c:505
msgid ""
"\n"
"On Solaris, if -a specified, uses swap -l, otherwise uses swap -s.\n"
"Will be discrepencies because swap -s counts allocated swap and includes\n"
"real memory\n"
msgstr ""

#: plugins/check_swap.c:509
msgid ""
"\n"
"On AIX, if -a is specified, uses lsps -a, otherwise uses lsps -s.\n"
msgstr ""

#: plugins/check_swap.c:521
#, c-format
msgid ""
"Usage:\n"
" %s [-av] -w <percent_free>%% -c <percent_free>%%\n"
" %s [-av] -w <bytes_free> -c <bytes_free>\n"
" %s (-h | --help) for detailed help\n"
" %s (-V | --version) for version information\n"
msgstr ""

#: plugins/check_tcp.c:202
msgid "ERROR: Generic check_tcp called with unknown service\n"
msgstr ""

#: plugins/check_tcp.c:287
msgid "Invalid response from host\n"
msgstr ""

#: plugins/check_tcp.c:326
#, c-format
msgid "%s %s%s - %.3f second response time on port %d"
msgstr ""

#: plugins/check_tcp.c:430
msgid "invalid host name or address"
msgstr ""

#: plugins/check_tcp.c:435 plugins/check_time.c:266 plugins/check_time.c:278
#: plugins/check_udp.c:166 plugins/check_users.c:154
msgid "Critical threshold must be a nonnegative integer\n"
msgstr ""

#: plugins/check_tcp.c:442 plugins/check_time.c:247 plugins/check_time.c:271
#: plugins/check_udp.c:173 plugins/check_users.c:160 plugins/check_users.c:170
#: plugins/check_users.c:177
msgid "Warning threshold must be a nonnegative integer\n"
msgstr ""

#: plugins/check_tcp.c:457
msgid "Timeout interval must be a positive integer\n"
msgstr ""

#: plugins/check_tcp.c:480
msgid "Maxbytes must be a positive integer\n"
msgstr ""

#: plugins/check_tcp.c:494
msgid "Refuse mut be one of ok, warn, crit\n"
msgstr ""

#: plugins/check_tcp.c:500
msgid "Delay must be a positive integer\n"
msgstr ""

#: plugins/check_tcp.c:505
msgid "SSL support not available. Install OpenSSL and recompile."
msgstr ""

#: plugins/check_tcp.c:513
msgid "You must provide a server address\n"
msgstr ""

#: plugins/check_tcp.c:531
msgid "ERROR: Cannot create SSL context.\n"
msgstr ""

#: plugins/check_tcp.c:557
msgid "ERROR: Cannot initiate SSL handshake.\n"
msgstr ""

#: plugins/check_tcp.c:603
#, fuzzy, c-format
msgid ""
"This plugin tests %s connections with the specified host.\n"
"\n"
msgstr "Le plugin tests a %s connection with l'host specified\n"

#: plugins/check_tcp.c:614
msgid ""
" -s, --send=STRING\n"
"    String to send to the server\n"
" -e, --expect=STRING\n"
"    String to expect in server response\n"
" -q, --quit=STRING\n"
"    String to send server to initiate a clean close of the connection\n"
msgstr ""
" -s, --send=STRING\n"
"    String to send to the server\n"
" -e, --expect=STRING\n"
"    String to expect in server response\n"
" -q, --quit=STRING\n"
"    String to send server to initiate a clean close of the connection\n"

#: plugins/check_tcp.c:622
#, fuzzy
msgid ""
" -r, --refuse=ok|warn|crit\n"
"    Accept tcp refusals with states ok, warn, crit (default: crit)\n"
" -m, --maxbytes=INTEGER\n"
"    Close connection once more than this number of bytes are received\n"
" -d, --delay=INTEGER\n"
"    Seconds to wait between sending string and polling for response\n"
msgstr ""
" -r, --refuse=ok|warn|crit\n"
"    Accept tcp refusals with states ok, warn, crit (default: crit)\n"
" -m, --maxbytes=INTEGER\n"
"    Close connection once more than this number of bytes are received\n"
" -d, --delay=INTEGER\n"
"    Seconds to wait between sending string and polling for response\n"
" -w, --warning=DOUBLE\n"
"    Response time to result in warning status (seconds)\n"
" -c, --critical=DOUBLE\n"
"    Response time to result in critical status (seconds)\n"

#: plugins/check_tcp.c:645
#, fuzzy, c-format
msgid ""
"Usage: %s -H host -p port [-w <warning time>] [-c <critical time>]\n"
"  [-s <send string>] [-e <expect string>] [-q <quit string>]\n"
"  [-m <maximum bytes>] [-d <delay>] [-t <timeout seconds>]\n"
"  [-r <refuse state>] [-v] [-4|-6]\n"
msgstr ""
"-H host -p port [-w warn_time] [-c crit_time] [-s send_string]\n"
"\t[-e expect_string] [-q quit_string] [-m maxbytes] [-d delay]\n"
"\t[-t to_sec] [-r refuse_state] [-v] [-4|-6]\n"

#: plugins/check_time.c:88
#, c-format
msgid "TIME UNKNOWN - could not connect to server %s, port %d\n"
msgstr ""

#: plugins/check_time.c:101
#, c-format
msgid "TIME UNKNOWN - could not send UDP request to server %s, port %d\n"
msgstr ""

#: plugins/check_time.c:125
#, c-format
msgid "TIME UNKNOWN - no data on recv() from server %s, port %d\n"
msgstr ""

#: plugins/check_time.c:138
#, c-format
msgid "TIME %s - %d second response time|%s\n"
msgstr ""

#: plugins/check_time.c:156
#, c-format
msgid "TIME %s - %lu second time difference|%s %s\n"
msgstr ""

#: plugins/check_time.c:229 plugins/check_time.c:304 plugins/check_udp.c:161
#: plugins/check_udp.c:202
msgid "Invalid host name/address\n"
msgstr ""

#: plugins/check_time.c:243
msgid "Warning thresholds must be a nonnegative integer\n"
msgstr ""

#: plugins/check_time.c:262
msgid "Critical thresholds must be a nonnegative integer\n"
msgstr ""

#: plugins/check_time.c:285 plugins/check_udp.c:186
msgid "Server port must be a nonnegative integer\n"
msgstr ""

#: plugins/check_time.c:291 plugins/check_udp.c:180
msgid "Timeout interval must be a nonnegative integer\n"
msgstr ""

#: plugins/check_time.c:308 plugins/check_udp.c:207
msgid "Host name was not supplied\n"
msgstr ""

#: plugins/check_time.c:328 plugins/check_udp.c:225 plugins/check_users.c:195
msgid "Copyright (c) 1999 Ethan Galstad\n"
msgstr ""

#: plugins/check_time.c:331
#, fuzzy
msgid ""
"This plugin will check the time on the specified host.\n"
"\n"
msgstr "Le plugin tests a %s connection with l'host specified\n"

#: plugins/check_time.c:340
msgid ""
" -u, --udp\n"
"    Use UDP to connect, not TCP\n"
" -w, --warning-variance=INTEGER\n"
"    Time difference (sec.) necessary to result in a warning status\n"
" -c, --critical-variance=INTEGER\n"
"    Time difference (sec.) necessary to result in a critical status\n"
" -W, --warning-connect=INTEGER\n"
"    Response time (sec.) necessary to result in warning status\n"
" -C, --critical-connect=INTEGER\n"
"    Response time (sec.) necessary to result in critical status\n"
msgstr ""

#: plugins/check_time.c:363
#, c-format
msgid ""
"Usage: %s -H <host_address> [-p port] [-u] [-w variance] [-c variance]\n"
"    [-W connect_time] [-C connect_time] [-t timeout]\n"
msgstr ""

#: plugins/check_udp.c:92
#, c-format
msgid "Connection %s on port %d - %d second response time\n"
msgstr ""

#: plugins/check_udp.c:93
msgid "accepted"
msgstr ""

#: plugins/check_udp.c:93
msgid "problem"
msgstr ""

#: plugins/check_udp.c:228
#, fuzzy
msgid ""
"This plugin tests an UDP connection with the specified host.\n"
"\n"
msgstr "Le plugin tests a %s connection with l'host specified\n"

#: plugins/check_udp.c:237
#, fuzzy
msgid ""
" -e, --expect=STRING <optional>\n"
"    String to expect in first line of server response\n"
" -s, --send=STRING <optional>\n"
"    String to send to the server when initiating the connection\n"
msgstr ""
" -s, --send=STRING\n"
"    String to send to the server\n"
" -e, --expect=STRING\n"
"    String to expect in server response\n"
" -q, --quit=STRING\n"
"    String to send server to initiate a clean close of the connection\n"

#: plugins/check_udp.c:249
msgid ""
"This plugin will attempt to connect to the specified port on the host.\n"
"Successful connects return STATE_OK, refusals and timeouts return\n"
"STATE_CRITICAL, other errors return STATE_UNKNOWN.\n"
"\n"
msgstr ""

#: plugins/check_udp.c:266
#, c-format
msgid ""
"Usage: %s -H <host_address> [-p port] [-w warn_time] [-c crit_time]\n"
"    [-e expect] [-s send] [-t to_sec] [-v]\n"
msgstr ""

#: plugins/check_ups.c:573
msgid "Copyright (c) 2000 Tom Shields"
msgstr ""

#: plugins/check_ups.c:576
msgid ""
"This plugin tests the UPS service on the specified host.\n"
"Network UPS Tools from www.exploits.org must be running for this plugin to\n"
"work.\n"
"\n"
msgstr ""

#: plugins/check_ups.c:586
msgid ""
" -u, --ups=STRING\n"
"    Name of UPS\n"
msgstr ""

#: plugins/check_ups.c:596
msgid ""
"This plugin attempts to determine the status of a UPS (Uninterruptible "
"Power\n"
"Supply) on a local or remote host. If the UPS is online or calibrating, the\n"
"plugin will return an OK state. If the battery is on it will return a "
"WARNING\n"
"state.  If the UPS is off or has a low battery the plugin will return a "
"CRITICAL\n"
"state.\n"
"\n"
msgstr ""

#: plugins/check_ups.c:603
msgid ""
"You may also specify a variable to check [such as temperature, utility "
"voltage,\n"
"battery load, etc.]  as well as warning and critical thresholds for the "
"value of\n"
"that variable.  If the remote host has multiple UPS that are being monitored "
"you\n"
"will have to use the [ups] option to specify which UPS to check.\n"
"\n"
msgstr ""

#: plugins/check_ups.c:609
msgid ""
"Notes:\n"
"\n"
"This plugin requires that the UPSD daemon distributed with Russel Kroll's\n"
"Smart UPS Tools be installed on the remote host.  If you do not have the\n"
"package installed on your system, you can download it from\n"
"http://www.exploits.org/nut\n"
"\n"
msgstr ""

#: plugins/check_ups.c:624
#, c-format
msgid ""
"Usage: %s -H host [-e expect] [-p port] [-w warn] [-c crit]\n"
"    [-t timeout] [-v]\n"
msgstr ""

#: plugins/check_users.c:76
#, c-format
msgid "# users=%d"
msgstr ""

#: plugins/check_users.c:106
#, c-format
msgid "USERS %s - %d users currently logged in |%s\n"
msgstr ""

#: plugins/check_users.c:198
msgid ""
"This plugin checks the number of users currently logged in on the local\n"
"system and generates an error if the number exceeds the thresholds "
"specified.\n"
msgstr ""

#: plugins/check_users.c:206
msgid ""
" -w, --warning=INTEGER\n"
"    Set WARNING status if more than INTEGER users are logged in\n"
" -c, --critical=INTEGER\n"
"    Set CRITICAL status if more than INTEGER users are logged in\n"
msgstr ""

#: plugins/negate.c:238
msgid ""
"Negates the status of a plugin (returns OK for CRITICAL, and vice-versa).\n"
"\n"
msgstr ""

#: plugins/negate.c:248
msgid "     [keep timeout than the plugin timeout to retain CRITICAL status]\n"
msgstr ""

#: plugins/negate.c:251
msgid ""
"  negate \"/usr/local/nagios/libexec/check_ping -H host\"\n"
"    Run check_ping and invert result. Must use full path to plugin\n"
"  negate \"/usr/local/nagios/libexec/check_procs -a 'vi negate.c'\"\n"
"    Use single quotes if you need to retain spaces\n"
msgstr ""

#: plugins/negate.c:257
msgid ""
"This plugin is a wrapper to take the output of another plugin and invert "
"it.\n"
"If the wrapped plugin returns STATE_OK, the wrapper will return "
"STATE_CRITICAL.\n"
"If the wrapped plugin returns STATE_CRITICAL, the wrapper will return "
"STATE_OK.\n"
"Otherwise, the output state of the wrapped plugin is unchanged.\n"
msgstr ""

#: plugins/negate.c:273
#, c-format
msgid "Usage: %s [-t timeout] <definition of wrapped plugin>\n"
msgstr ""

#: plugins/urlize.c:105
#, c-format
msgid ""
"%s problem - No data received from host\n"
"CMD: %s</A>\n"
msgstr ""

#: plugins/urlize.c:135
msgid ""
"\n"
"This plugin wraps the text output of another command (plugin) in HTML\n"
"<A> tags, thus displaying the plugin output in as a clickable link in\n"
"the Nagios status screen.  The return status is the same as the invoked\n"
"plugin.\n"
"\n"
msgstr ""

#: plugins/urlize.c:143
msgid ""
"\n"
"Pay close attention to quoting to ensure that the shell passes the expected\n"
"data to the plugin. For example, in:\n"
"\n"
"    urlize http://example.com/ check_http -H example.com -r 'two words'\n"
"\n"
"the shell will remove the single quotes and urlize will see:\n"
"\n"
"    urlize http://example.com/ check_http -H example.com -r two words\n"
"\n"
"You probably want:\n"
"\n"
"    urlize http://example.com/ \"check_http -H example.com -r 'two words'\"\n"
msgstr ""

#: plugins/urlize.c:166
#, c-format
msgid ""
"Usage:\n"
" %s <url> <plugin> <arg1> ... <argN>\n"
msgstr ""

#: plugins/utils.c:80
msgid ""
"\n"
"Send email to nagios-users@lists.sourceforge.net if you have questions\n"
"regarding use of this software. To submit patches or suggest improvements,\n"
"send email to nagiosplug-devel@lists.sourceforge.net\n"
msgstr ""

#: plugins/utils.c:106
msgid ""
"The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute\n"
"copies of the plugins under the terms of the GNU General Public License.\n"
"For more information about these matters, see the file named COPYING.\n"
msgstr ""

#~ msgid ""
#~ " -t, --timeout=INTEGER\n"
#~ "    Seconds before connection times out (default: %d)\n"
#~ " -v, --verbose\n"
#~ "    Show details for command-line debugging (Nagios may truncate output)\n"
#~ " -h, --help\n"
#~ "    Print detailed help screen\n"
#~ " -V, --version\n"
#~ "    Print version information\n"
#~ "\n"
#~ msgstr ""
#~ " -t, --timeout=INTEGER\n"
#~ "    Seconds before connection times out (default: %d)\n"
#~ " -v, --verbose\n"
#~ "    Show details for command-line debugging (Nagios may truncate output)\n"
#~ " -h, --help\n"
#~ "    Print detailed help screen\n"
#~ " -V, --version\n"
#~ "    Print version information\n"
#~ "\n"