NAGIOS-NOTIFY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32 FROM SNMPv2-SMI nagios,NotifyType,HostStateID,HostStateType,ServiceStateID FROM NAGIOS-ROOT-MIB; nagiosNotify MODULE-IDENTITY LAST-UPDATED "200503090000Z" -- March 9, 2005 ORGANIZATION "Nagios" CONTACT-INFO " Subhendu Ghosh Telephone: +1 201 232 2851 Email: sghosh@users.sourceforge.net Nagios Information: http://www.nagios.org " DESCRIPTION "Objects for Nagios(tm) events. There are 2 primary tables reflecting the division in Nagios for Host events and Service events. The event tables are extended by the HostNotifyTable and the ServiceNotifyTable to keep track of the notifications based on events. The tables entries themselves are not accessible but are used for OID entries for TRAP/INFORM notifications. These objects are based on the macros defined in Nagios v2.0 " REVISION "200503090000Z" -- March 9, 2005 DESCRIPTION "Spell check" REVISION "200501200000Z" --January 20, 2005 DESCRIPTION "Initial Version" ::= { nagios 1 } nagiosHostEventTable OBJECT-TYPE SYNTAX SEQUENCE OF HostEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Nagios host events" ::= { nagiosNotify 1 } HostEventEntry ::= SEQUENCE { nHostEventIndex Integer32, nHostname OCTET STRING, nHostAlias OCTET STRING, nHostStateID HostStateID, nHostStateType HostStateType, nHostAttempt Integer32, nHostDurationSec Integer32, nHostGroupName OCTET STRING, nHostLastCheck INTEGER, nHostLastChange INTEGER, nHostLastUp INTEGER, nHostLastDown INTEGER, nHostLastUnreachable INTEGER, nHostOutput OCTET STRING, nHostPerfData OCTET STRING } nagiosHostEventEntry OBJECT-TYPE SYNTAX HostEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each notification event" INDEX { nHostEventIndex } ::= { nagiosHostEventTable 1 } nHostEventIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies this host event entry. It is generated by the SNMP application and is not related to any Nagios data." ::= { nagiosHostEventEntry 1 } nHostname OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Hostname as specified in the Nagios configuration file." ::= { nagiosHostEventEntry 2 } nHostAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The host alias as specified in the Nagios configuration file" ::= { nagiosHostEventEntry 3 } nHostStateID OBJECT-TYPE SYNTAX HostStateID MAX-ACCESS read-only STATUS current DESCRIPTION "The host state as defined by the HOSTSTATEID macro" ::= { nagiosHostEventEntry 4 } nHostStateType OBJECT-TYPE SYNTAX HostStateType MAX-ACCESS read-only STATUS current DESCRIPTION "The host state as defined by the HOSTSTATETYPE macro" ::= { nagiosHostEventEntry 5 } nHostAttempt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the current host check retry. For instance, if this is the second time that the host is being rechecked, this will be the number two. Current attempt number is really only useful when writing host event handlers for soft states that take a specific action based on the host retry number. The host state as defined by the HOSTSTATEID macro" ::= { nagiosHostEventEntry 6 } nHostDurationSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A number indicating the number of seconds that the host has spent in its current state" ::= { nagiosHostEventEntry 7 } nHostGroupName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The short name of the hostgroup that this host belongs to. This value is taken from the hostgroup_name directive in the hostgroup definition. If the host belongs to more than one hostgroup this macro will contain the name of just one of them." ::= { nagiosHostEventEntry 8 } nHostLastCheck OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which a check of the host was last performed." ::= { nagiosHostEventEntry 9 } nHostLastChange OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time the host last changed state." ::= { nagiosHostEventEntry 10 } nHostLastUp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which the host was last detected as being in an UP state." ::= { nagiosHostEventEntry 11 } nHostLastDown OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which the host was last detected as being in an DOWN state." ::= { nagiosHostEventEntry 12 } nHostLastUnreachable OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which the host was last detected as being in an UNREACHABLE state." ::= { nagiosHostEventEntry 13 } nHostOutput OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The text output from the last host check (i.e. Ping OK)." ::= { nagiosHostEventEntry 14 } nHostPerfData OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains any performance data that may have been returned by the last host check." ::= { nagiosHostEventEntry 15 } -- -- Host Notifications nagiosHostNotifyTable OBJECT-TYPE SYNTAX SEQUENCE OF HostNotifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Nagios host notifications" ::= {nagiosNotify 2} HostNotifyEntry ::= SEQUENCE { nHostNotifyType NotifyType, nHostNotifyNum Integer32, nHostAckAuthor OCTET STRING, nHostAckComment OCTET STRING } nagiosHostNotifyEntry OBJECT-TYPE SYNTAX HostNotifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Nagios host notifications extends the nagiosHostEventTable when a notification is generated for an event." INDEX { nHostEventIndex } ::= { nagiosHostNotifyTable 1 } nHostNotifyType OBJECT-TYPE SYNTAX NotifyType MAX-ACCESS read-only STATUS current DESCRIPTION "This identifies the type of notification that is being sent (PROBLEM, RECOVERY, ACKNOWLEDGEMENT, FLAPPINGSTART or FLAPPINGSTOP)" ::= { nagiosHostNotifyEntry 1 } nHostNotifyNum OBJECT-TYPE SYNTAX NotifyType MAX-ACCESS read-only STATUS current DESCRIPTION "This identifies the current notification number for the service or host. The notification number increases by one (1) each time a new notification is sent out for a host or service (except for acknowledgements). The notification number is reset to 0 when the host or service recovers (after the recovery notification has gone out). Acknowledgements do not cause the notification number to increase." ::= { nagiosHostNotifyEntry 2 } nHostAckAuthor OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string containing the name of the user who acknowledged the host problem. This macro is only valid in notifications where the $NOTIFICATIONTYPE$ macro is set to ACKNOWLEDGEMENT." ::= { nagiosHostNotifyEntry 3 } nHostAckComment OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string containing the acknowledgement comment that was entered by the user who acknowledged the host problem. This macro is only valid in notifications where the $NOTIFICATIONTYPE$ macro is set to ACKNOWLEDGEMENT" ::= { nagiosHostNotifyEntry 4 } -- -- Service Events -- nagiosSvcEventTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Nagios service notifications" ::= { nagiosNotify 3 } SvcEventEntry ::= SEQUENCE { nSvcEventIndex Integer32, nSvcHostname OCTET STRING, nSvcHostAlias OCTET STRING, nSvcHostStateID HostStateID, nSvcHostStateType HostStateType, nSvcDesc OCTET STRING, nSvcStateID ServiceStateID, nSvcAttempt Integer32, nSvcDurationSec Integer32, nSvcGroupName OCTET STRING, nSvcLastCheck INTEGER, nSvcLastChange INTEGER, nSvcLastOK INTEGER, nSvcLastWarn INTEGER, nSvcLastCrit INTEGER, nSvcLastUnkn INTEGER, nSvcOutput OCTET STRING, nSvcPerfData OCTET STRING } nagiosSvcEventEntry OBJECT-TYPE SYNTAX SvcEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Nagios service events." INDEX { nSvcEventIndex } ::= { nagiosSvcEventTable 1 } nSvcEventIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies this service event entry" ::= { nagiosSvcEventEntry 1 } nSvcHostname OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Hostname as specified in the Nagios configuration file." ::= { nagiosSvcEventEntry 2 } nSvcHostAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The host alias as specified in the Nagios configuration file" ::= { nagiosSvcEventEntry 3 } nSvcHostStateID OBJECT-TYPE SYNTAX HostStateID MAX-ACCESS read-only STATUS current DESCRIPTION "A number that corresponds to the current state of the service: 0=OK, 1=WARNING, 2=CRITICAL, 3=UNKNOWN." ::= { nagiosSvcEventEntry 4 } nSvcHostStateType OBJECT-TYPE SYNTAX HostStateType MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the host is in a hard or soft state." ::= { nagiosSvcEventEntry 5 } nSvcDesc OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This value is taken from the description directive of the service definition." ::= { nagiosSvcEventEntry 6 } nSvcStateID OBJECT-TYPE SYNTAX ServiceStateID MAX-ACCESS read-only STATUS current DESCRIPTION " A number that corresponds to the current state of the service: 0=OK, 1=WARNING, 2=CRITICAL, 3=UNKNOWN" ::= { nagiosSvcEventEntry 7 } nSvcAttempt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the current service check retry. For instance, if this is the second time that the service is being rechecked, this will be the number two. Current attempt number is really only useful when writing service event handlers for soft states that take a specific action based on the service retry number." ::= { nagiosSvcEventEntry 8 } nSvcDurationSec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A number indicating the number of seconds that the service has spent in its current state." ::= { nagiosSvcEventEntry 9 } nSvcGroupName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The short name of the servicegroup that this service belongs to. This value is taken from the servicegroup_name directive in the servicegroup definition. If the service belongs to more than one servicegroup this object will contain the name of just one of them." ::= { nagiosSvcEventEntry 10 } nSvcLastCheck OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which a check of the service was last performed." ::= { nagiosSvcEventEntry 11 } nSvcLastChange OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time the service last changed state." ::= { nagiosSvcEventEntry 12 } nSvcLastOK OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which the service was last detected as being in an OK state." ::= { nagiosSvcEventEntry 13 } nSvcLastWarn OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which the service was last detected as being in a WARNING state." ::= { nagiosSvcEventEntry 14 } nSvcLastCrit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which the service was last detected as being in a CRITICAL state." ::= { nagiosSvcEventEntry 15 } nSvcLastUnkn OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This is a timestamp in time_t format (seconds since the UNIX epoch) indicating the time at which the service was last detected as being in an UNKNOWN state." ::= { nagiosSvcEventEntry 16 } nSvcOutput OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The text output from the last service check (i.e. Ping OK)." ::= { nagiosSvcEventEntry 17 } nSvcPerfData OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains any performance data that may have been returned by the last service check." ::= { nagiosSvcEventEntry 18 } -- -- Service Notifications -- nagiosSvcNotifyTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcNotifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of Nagios service notifications." ::= { nagiosNotify 4 } SvcNotifyEntry ::= SEQUENCE { nSvcNotifyType NotifyType, nSvcNotifyNum Integer32, nSvcAckAuthor OCTET STRING, nSvcAckComment OCTET STRING } nagiosSvcNotifyEntry OBJECT-TYPE SYNTAX SvcNotifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Nagios service notifications extends the nagiosSvcEnevtsTable when a notification is generated for an event." INDEX { nSvcEventIndex } ::= { nagiosSvcNotifyTable 1} nSvcNotifyType OBJECT-TYPE SYNTAX NotifyType MAX-ACCESS read-only STATUS current DESCRIPTION "A string identifying the type of notification that is being sent (PROBLEM, RECOVERY, ACKNOWLEDGEMENT, FLAPPINGSTART or FLAPPINGSTOP)." ::= { nagiosSvcNotifyEntry 1 } nSvcNotifyNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current notification number for the service or host. The notification number increases by one (1) each time a new notification is sent out for a host or service (except for acknowledgements). The notification number is reset to 0 when the host or service recovers (after the recovery notification has gone out). Acknowledgements do not cause the notification number to increase." ::= { nagiosSvcNotifyEntry 2 } nSvcAckAuthor OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string containing the name of the user who acknowledged the service problem. This object is only valid in notifications where the nSvcNotifyType object is set to ACKNOWLEDGEMENT." ::= { nagiosSvcNotifyEntry 3 } nSvcAckComment OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string containing the acknowledgement comment that was entered by the user who acknowledged the service problem. This object is only valid in notifications where the nSvcNotifyType object is set to ACKNOWLEDGEMENT." ::= { nagiosSvcNotifyEntry 4 } -- -- Events and Notifications -- nHostEvent NOTIFICATION-TYPE OBJECTS { nHostname, nHostStateID, nHostStateType, nHostAttempt, nHostDurationSec, nHostGroupName, nHostLastCheck, nHostLastChange, nHostOutput } STATUS current DESCRIPTION "The SNMP trap that is generated as a result of an event with the host in Nagios." ::= { nagiosNotify 5 } nHostNotify NOTIFICATION-TYPE OBJECTS { nHostNotifyType, nHostNotifyNum, nHostAckAuthor, nHostAckComment, nHostname, nHostStateID, nHostStateType, nHostAttempt, nHostDurationSec, nHostGroupName, nHostLastCheck, nHostLastChange, nHostOutput } STATUS current DESCRIPTION "The SNMP trap that is generated as a result of an event requiring notification for a host in Nagios." ::= { nagiosNotify 6 } nSvcEvent NOTIFICATION-TYPE OBJECTS { nHostname, nHostStateID, nSvcDesc, nSvcStateID, nSvcAttempt, nSvcDurationSec, nSvcGroupName, nSvcLastCheck, nSvcLastChange, nSvcOutput } STATUS current DESCRIPTION "The SNMP trap that is generated as a result of an event with the service in Nagios." ::= { nagiosNotify 7 } nSvcNotify NOTIFICATION-TYPE OBJECTS { nSvcNotifyType, nSvcNotifyNum, nSvcAckAuthor, nSvcAckComment, nHostname, nHostStateID, nSvcDesc, nSvcStateID, nSvcAttempt, nSvcDurationSec, nSvcGroupName, nSvcLastCheck, nSvcLastChange, nSvcOutput } STATUS current DESCRIPTION "The SNMP trap that is generated as a result of an event requiring notification for a service in Nagios." ::= { nagiosNotify 8 } END