#! /opt/coolstack/bin/perl -w
# vim:foldmethod=syntax:tabstop=4:shiftwidth=4
#
# Matthew Martin, Tuesday August 14, 2007
# Problems with check_ifstatus.pl
#	1) "No response from remote host" should be unknown, not critical, right?
#	2) Serial link "dormant" should be critical, not okay
#	3) dormant, excluded and unused interfaces are not correctly counted
#	4) add some default exclusions
#
# check_ifstatus.pl - nagios plugin
#
#
# Copyright (C) 2000 Christoph Kron
# Modified 5/2002 to conform to updated Nagios Plugin Guidelines (S. Ghosh)
#  Added -x option (4/2003)
#  Added -u option (4/2003)
#  Added -M option (10/2003)
#  Added SNMPv3 support (10/2003)
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
#
#
# Report bugs to: ck@zet.net, nagiosplug-help@lists.sf.net
# 
# 11.01.2000 Version 1.0
#
# $Id: check_ifstatus.pl 884 2004-08-18 19:51:35Z tonvoon $

use POSIX;
use strict;
use lib "/opt/nagios-3.0.5/libexec"  ;
use utils qw($TIMEOUT %ERRORS &print_revision &support);

use Net::SNMP;
use Getopt::Long;
Getopt::Long::Configure('bundling');

my $PROGNAME = "check_ifstatus";

sub print_help ();
sub usage ();
sub process_arguments ();


my $status;
my %ifOperStatus =	('1','up',
			 '2','down',
			 '3','testing',
			 '4','unknown',
			 '5','dormant',
			 '6','notPresent',
			 '7','lowerLayerDown');  # down due to the state of lower layer interface(s));

my $timeout ;
my $state = "UNKNOWN";
my $answer = "";
my $snmpkey=0;
my $snmpoid=0;
my $key=0;
my $community = "public";
my $maxmsgsize = 1472 ; # Net::SNMP default is 1472
my ($seclevel, $authproto, $secname, $authpass, $privpass, $auth, $priv, $context);
my $port = 161;
my @snmpoids;
my $snmpIfAdminStatus = '1.3.6.1.2.1.2.2.1.7';
my $snmpIfDescr = '1.3.6.1.2.1.2.2.1.2';
my $snmpIfOperStatus = '1.3.6.1.2.1.2.2.1.8';
my $snmpIfName = '1.3.6.1.2.1.31.1.1.1.1';
my $snmpIfAlias = '1.3.6.1.2.1.31.1.1.1.18';
my $snmpLocIfDescr = '1.3.6.1.4.1.9.2.2.1.1.28';
my $snmpIfType = '1.3.6.1.2.1.2.2.1.3';
my $hostname;
my $session;
my $error;
my $response;
my %ifStatus;
my $ifup =0 ;
my $ifdown =0;
my $ifdormant = 0;
my $ifexclude = 0 ;
my $ifunused = 0;
my $ifmessage = "";
my $snmp_version = 1;
my $ifXTable;
my $opt_h ;
my $opt_V ;
my $opt_u;
my $opt_x ;
my %excluded ;
my @unused_ports ;

# Just in case of problems, let's not hang Nagios
$SIG{'ALRM'} = sub {
     print ("ERROR: No snmp response from $hostname (alarm timeout)\n");
     exit $ERRORS{"UNKNOWN"};
};


#Option checking
$status = process_arguments();

if ($status != 0)
{
	print_help() ;
	exit $ERRORS{'OK'};
}


alarm($timeout);

push(@snmpoids,$snmpIfOperStatus);
push(@snmpoids,$snmpIfAdminStatus);
push(@snmpoids,$snmpIfDescr);
push(@snmpoids,$snmpIfType);
push(@snmpoids,$snmpIfName) if ( defined $ifXTable);
push(@snmpoids,$snmpIfAlias) if ( defined $ifXTable);




foreach $snmpoid (@snmpoids) {

   if (!defined($response = $session->get_table($snmpoid))) {
      $answer=$session->error;
      $session->close;
		# mgmart6. Tuesday August 14, 2007
		# I think a SNMP error should give UNKNOWN, not CRITICAL
		#$state = 'CRITICAL';
		$state = 'UNKNOWN';
			if ( ( $snmpoid =~ $snmpIfName ) && defined $ifXTable ) {
				print ("$state: Device does not support ifTable - try without -I option\n");
			}else{
				print ("$state: $answer for $snmpoid  with snmp version $snmp_version\n");
			}
      exit $ERRORS{$state};
   }

   foreach $snmpkey (keys %{$response}) {
      $snmpkey =~ /.*\.(\d+)$/;
      $key = $1;
      $ifStatus{$key}{$snmpoid} = $response->{$snmpkey};
   }
}


$session->close;

alarm(0);

# mgmart6. This script cannot tell that specific logical interfaces are
# associated with their phys IF so it checks them all.
foreach $key (keys %ifStatus) {

	# Skip interfaces flagged with -u (--unused_ports)
	# "A comma separated list of ifIndex values that should be excluded"
	if (!defined($ifStatus{$key}{'notInUse'})) {
		# check only if interface is administratively up
    if ($ifStatus{$key}{$snmpIfAdminStatus} == 1 ) {
    
			# check only if interface type is not listed in %excluded
			if (!defined $excluded{$ifStatus{$key}{$snmpIfType}} ) {
				if ($ifStatus{$key}{$snmpIfOperStatus} == 1 ) { $ifup++ ;}
				if ($ifStatus{$key}{$snmpIfOperStatus} == 2 ) {
								$ifdown++ ;
								if (defined $ifXTable) {
									$ifmessage .= sprintf("%s: down -> %s<BR>",
															$ifStatus{$key}{$snmpIfName},
															$ifStatus{$key}{$snmpIfAlias});
								}else{
									$ifmessage .= sprintf("%s: down <BR>",
															$ifStatus{$key}{$snmpIfDescr});
								}
				}
				if ($ifStatus{$key}{$snmpIfOperStatus} == 5 ) { $ifdormant++ ;}
			# Matthew Martin Interface is listed in %excluded
			} else {
				$ifexclude++;
			}
		# mgmart6 If not administratively up, mark as unused.
		} elsif ($ifStatus{$key}{$snmpIfAdminStatus} == 2 ) {
			$ifunused++;
		}
	}else{
		# mgmart6. Original line: $ifunused++;
		# actually matches the flag 
		# -u (--unused_ports) A comma separated list of ifIndex values that should be excluded
		# They should be marked as excluded, not unused.
		$ifexclude++;
	}
}

# mgmart6
# The original has dormant serial interfaces return status of "OK".
# A dormant serial connection should be CRITICAL, right?
# I changed the following line to address this:
#if ($ifdown > 0) {
if (($ifdown > 0) || ($ifdormant > 0)) {
	$state = 'CRITICAL';
	$answer = sprintf("host '%s', interfaces up: %d, down: %d, dormant: %d, excluded: %d, unused: %d<BR>",
		$hostname,
		$ifup,
		$ifdown,
		$ifdormant,
		$ifexclude,
		$ifunused);
	$answer = $answer . $ifmessage . "\n";
} else {
	$state = 'OK';
	$answer = sprintf("host '%s', interfaces up: %d, down: %d, dormant: %d, excluded: %d, unused: %d",
		$hostname,
		$ifup,
		$ifdown,
		$ifdormant,
		$ifexclude,
		$ifunused);
}
my $perfdata = sprintf("up=%d,down=%d,dormant=%d,excluded=%d,unused=%d",$ifup,$ifdown,$ifdormant,$ifexclude,$ifunused);
print ("$state: $answer |$perfdata\n");
exit $ERRORS{$state};


sub usage (){
	printf "\nMissing arguments!\n";
	printf "\n";
	printf "check_ifstatus -C <READCOMMUNITY> -p <PORT> -H <HOSTNAME>\n";
	printf "Copyright (C) 2000 Christoph Kron\n";
	printf "Updates 5/2002 Subhendu Ghosh\n";
	printf "\n\n";
	support();
	exit $ERRORS{"UNKNOWN"};
}

sub print_help (){
	printf "check_ifstatus plugin for Nagios monitors operational \n";
	printf "status of each network interface on the target host\n";
	printf "\nUsage:\n";
	printf "   -H (--hostname)   Hostname to query - (required)\n";
	printf "   -C (--community)  SNMP read community (defaults to public,\n";
	printf "                     used with SNMP v1 and v2c\n";
	printf "   -v (--snmp_version)  1 for SNMP v1 (default)\n";
	printf "                        2 for SNMP v2c\n";
	printf "                          SNMP v2c will use get_bulk for less overhead\n";
	printf "                        3 for SNMPv3 (requires -U option)";
	printf "   -p (--port)       SNMP port (default 161)\n";
	printf "   -I (--ifmib)      Agent supports IFMIB ifXTable.  For Cisco - this will provide\n";
	printf "                     the descriptive name.  Do not use if you don't know what this is. \n";
	printf "   -x (--exclude)    A comma separated list of ifType values that should be excluded \n";
	printf "                     from the report (default for an empty list is PPP(23).\n";
	printf "   -u (--unused_ports) A comma separated list of ifIndex values that should be excluded \n";
	printf "                     from the report (default is an empty exclusion list).\n";
	printf "                     See the IANAifType-MIB for a list of interface types.\n";
	printf "   -L (--seclevel)   choice of \"noAuthNoPriv\", \"authNoPriv\", or	\"authPriv\"\n";
	printf "   -U (--secname)    username for SNMPv3 context\n";
	printf "   -c (--context)    SNMPv3 context name (default is empty	string)";
	printf "   -A (--authpass)   authentication password (cleartext ascii or localized key\n";
	printf "                     in hex with 0x prefix generated by using	\"snmpkey\" utility\n"; 
	printf "                     auth password and authEngineID\n";
	printf "   -a (--authproto)  Authentication protocol ( MD5 or SHA1)\n";
	printf "   -X (--privpass)   privacy password (cleartext ascii or localized key\n";
	printf "                     in hex with 0x prefix generated by using	\"snmpkey\" utility\n"; 
	printf "                     privacy password and authEngineID\n";
	printf "   -M (--maxmsgsize) Max message size - usefull only for v1 or v2c\n";
	printf "   -t (--timeout)    seconds before the plugin times out (default=$TIMEOUT)\n";
	printf "   -V (--version)    Plugin version\n";
	printf "   -h (--help)       usage help \n\n";
	print_revision($PROGNAME, '$Revision: 884 $');
	
}

sub process_arguments() {
	$status = GetOptions(
		"V"   => \$opt_V, "version"    => \$opt_V,
		"h"   => \$opt_h, "help"       => \$opt_h,
		"v=i" => \$snmp_version, "snmp_version=i"  => \$snmp_version,
		"C=s" => \$community,"community=s" => \$community,
		"L=s" => \$seclevel, "seclevel=s" => \$seclevel,
		"a=s" => \$authproto, "authproto=s" => \$authproto,
		"U=s" => \$secname,   "secname=s"   => \$secname,
		"A=s" => \$authpass,  "authpass=s"  => \$authpass,
		"X=s" => \$privpass,  "privpass=s"  => \$privpass,
		"c=s" => \$context,   "context=s"   => \$context,
		"p=i" =>\$port, "port=i" => \$port,
		"H=s" => \$hostname, "hostname=s" => \$hostname,
		"I"		=> \$ifXTable, "ifmib" => \$ifXTable,
		"x:s"		=>	\$opt_x,   "exclude:s" => \$opt_x,
		"u=s" => \$opt_u,  "unused_ports=s" => \$opt_u,
		"M=i" => \$maxmsgsize, "maxmsgsize=i" => \$maxmsgsize,
		"t=i" => \$timeout,    "timeout=i" => \$timeout,
		);
		
	if ($status == 0){
		print_help() ;
		exit $ERRORS{'OK'};
	}
	if ($opt_V) {
		print_revision($PROGNAME,'$Revision: 884 $ ');
		exit $ERRORS{'OK'};
	}

	if ($opt_h) {
		print_help();
		exit $ERRORS{'OK'};
	}

	unless (defined $timeout) {
		$timeout = $TIMEOUT;
	}

	if ($snmp_version =~ /3/ ) {
		# Must define a security level even though default is noAuthNoPriv
		# v3 requires a security username
		if (defined $seclevel  && defined $secname) {
		
			# Must define a security level even though defualt is noAuthNoPriv
			unless ($seclevel eq ('noAuthNoPriv' || 'authNoPriv' || 'authPriv' ) ) {
				usage();
				exit $ERRORS{"UNKNOWN"};
			}
			
			# Authentication wanted
			if ($seclevel eq ('authNoPriv' || 'authPriv') ) {
		
				unless ($authproto eq ('MD5' || 'SHA1') ) {
					usage();
					exit $ERRORS{"UNKNOWN"};
				}

				if ( !defined $authpass) {
					usage();
					exit $ERRORS{"UNKNOWN"};
				}else{
					if ($authpass =~ /^0x/ ) {
						$auth = "-authkey => $authpass" ;
					}else{
						$auth = "-authpassword => $authpass";
					}
				}
					
			}
			
			# Privacy (DES encryption) wanted
			if ($seclevel eq  'authPriv' ) {
				if (! defined $privpass) {
					usage();
					exit $ERRORS{"UNKNOWN"};
				}else{
					if ($privpass =~ /^0x/){
						$priv = "-privkey => $privpass";
					}else{
						$priv = "-privpassword => $privpass";
					}
				}
			}

			# Context name defined or default

			unless ( defined $context) {
				$context = "";
			}
		
		
		
		}else {
					usage();
					exit $ERRORS{'UNKNOWN'}; ;
		}
	} # end snmpv3

	# for snmp v1 & v2c we default to community = "public"
	
	# Excluded interfaces types (ifType) (backup interfaces, dial-on demand interfaces, PPP interfaces
	if (defined $opt_x) {
		my @x = split(/,/, $opt_x);
		if ( @x) {
			foreach $key (@x){
				$excluded{$key} = 1;
			}
		}
	# Matthew Martin In the original this else was nested wrong and never matched
	} else {
		$excluded{23} = 1; # default PPP(23) if empty list - note (AIX seems to think PPP is 22 according to a post)
		$excluded{24} = 1; # mgmart6, Tuesday August 14, 2007, Nokia, ifDescr.6 = loop0c0 Software Loopback Layer -- ifType.6 = softwareLoopback(24) (taken from a Nokia IP330)
		$excluded{25} = 1; # mgmart6, Tuesday August 14, 2007, Nokia, ifDescr.1 = pppoe0 Ethernet Layer -- ifType.1 = eon(25) (from a Nokia IP350)
	}
	
	# Excluded interface ports (ifIndex) - management reasons
	if ($opt_u) {
		@unused_ports = split(/,/,$opt_u);
		foreach $key (@unused_ports) { 
			$ifStatus{$key}{'notInUse'}++ ;
		}
	}

	if (! utils::is_hostname($hostname)){
		usage();
		exit $ERRORS{"UNKNOWN"};
	}

	# create SNMP session handle based on options passed.

	if ( ! $snmp_version ) {
		$snmp_version =1 ;
	}else{
		if ( $snmp_version =~ /[12]/ ) {
	
			($session, $error) = Net::SNMP->session(
						-hostname  => $hostname,
						-community => $community,
						-port      => $port,
						-version	=> $snmp_version,
						-maxmsgsize => $maxmsgsize
			 );

		if (!defined($session)) {
					$state='UNKNOWN';
					$answer=$error;
					print ("$state: $answer");
					exit $ERRORS{$state};
		}

		
	}elsif ( $snmp_version =~ /3/ ) {

		if ($seclevel eq 'noAuthNoPriv') {
			($session, $error) = Net::SNMP->session(
				-hostname  => $hostname,
				-port      => $port,
				-version  => $snmp_version,
				-username => $secname,
			);

		}elsif ( $seclevel eq 'authNoPriv' ) {
			($session, $error) = Net::SNMP->session(
				-hostname  => $hostname,
				-port      => $port,
				-version  => $snmp_version,
				-username => $secname,
				-authprotocol => $authproto,
				$auth
			);	
		}elsif ($seclevel eq 'authPriv' ) {
			($session, $error) = Net::SNMP->session(
				-hostname  => $hostname,
				-port      => $port,
				-version  => $snmp_version,
				-username => $secname,
				-authprotocol => $authproto,
				$auth,
				$priv
			);
		}
					
					
		if (!defined($session)) {
					$state='UNKNOWN';
					$answer=$error;
					print ("$state: $answer");
					exit $ERRORS{$state};
		}
			
	}else{
		$state='UNKNOWN';
		print ("$state: No support for SNMP v$snmp_version yet\n");
		exit $ERRORS{$state};
	}
}

return $ERRORS{"OK"};
				
}