[Nagiosplug-help] check_disk

[Pascal Miquet]

Unfortunately, I think that most of us as made this confusion one time.
Regards

Le lun 23/12/2002 à 22:31, Michael Kingsbury a écrit :
> Reverse them; ./check_disk -w 20% -c 10% -p /dev/hdxx. 
> 
> Its amount free, not total used when using percentages.
> 
> 
> -mike
> -----Original Message-----
> From: Bryan Bowersock [mailto:bryanb at genesisgroup.com] 
> Sent: Monday, December 23, 2002 4:23 PM
> To: nagiosplug-help at lists.sourceforge.net
> Subject: [Nagiosplug-help] check_disk
> 
> 
> I am trying to configure the check_disk plugin for my Nagios server and
> was hoping to gain a little insight as how the command is actually
> applied.
> 
> Here is what I am trying to do:
> 
> Monitor /dev/hdxx to display a warning message if over 80% capacity
> Monitor /dev/hdxx to display a critical message if over 90% capacity
> 
> >From the --help I was led to believe the command would look like this:
> 
> ./check_disk -w 80% -c 90% -p /dev/hdxx
> 
> This is the error I am receiving:
> 
> INPUT ERROR: C_DFP (90.000000) should be less than W_DFP (80.000000) and
> both should be between zero and 100 percent, inclusive
> 
> Please help!  Thanks.
> 
> BryanB.
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Nagiosplug-help mailing list
> Nagiosplug-help at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagiosplug-help