3 files changed, 434 insertions, 6 deletions

diff --git a/m4/libcurl.m4 b/m4/libcurl.m4
new file mode 100644
index 0000000..53d694d
--- /dev/null
+++ b/m4/libcurl.m4
@@ -0,0 +1,272 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 2006, David Shaw <dshaw@jabberwocky.com>
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
+# LIBCURL_CHECK_CONFIG ([DEFAULT-ACTION], [MINIMUM-VERSION],
+#                       [ACTION-IF-YES], [ACTION-IF-NO])
+# ----------------------------------------------------------
+#      David Shaw <dshaw@jabberwocky.com>   May-09-2006
+#
+# Checks for libcurl.  DEFAULT-ACTION is the string yes or no to
+# specify whether to default to --with-libcurl or --without-libcurl.
+# If not supplied, DEFAULT-ACTION is yes.  MINIMUM-VERSION is the
+# minimum version of libcurl to accept.  Pass the version as a regular
+# version number like 7.10.1. If not supplied, any version is
+# accepted.  ACTION-IF-YES is a list of shell commands to run if
+# libcurl was successfully found and passed the various tests.
+# ACTION-IF-NO is a list of shell commands that are run otherwise.
+# Note that using --without-libcurl does run ACTION-IF-NO.
+#
+# This macro #defines HAVE_LIBCURL if a working libcurl setup is
+# found, and sets @LIBCURL@ and @LIBCURL_CPPFLAGS@ to the necessary
+# values.  Other useful defines are LIBCURL_FEATURE_xxx where xxx are
+# the various features supported by libcurl, and LIBCURL_PROTOCOL_yyy
+# where yyy are the various protocols supported by libcurl.  Both xxx
+# and yyy are capitalized.  See the list of AH_TEMPLATEs at the top of
+# the macro for the complete list of possible defines.  Shell
+# variables $libcurl_feature_xxx and $libcurl_protocol_yyy are also
+# defined to 'yes' for those features and protocols that were found.
+# Note that xxx and yyy keep the same capitalization as in the
+# curl-config list (e.g. it's "HTTP" and not "http").
+#
+# Users may override the detected values by doing something like:
+# LIBCURL="-lcurl" LIBCURL_CPPFLAGS="-I/usr/myinclude" ./configure
+#
+# For the sake of sanity, this macro assumes that any libcurl that is
+# found is after version 7.7.2, the first version that included the
+# curl-config script.  Note that it is very important for people
+# packaging binary versions of libcurl to include this script!
+# Without curl-config, we can only guess what protocols are available,
+# or use curl_version_info to figure it out at runtime.
+
+AC_DEFUN([LIBCURL_CHECK_CONFIG],
+[
+  AH_TEMPLATE([LIBCURL_FEATURE_SSL],[Defined if libcurl supports SSL])
+  AH_TEMPLATE([LIBCURL_FEATURE_KRB4],[Defined if libcurl supports KRB4])
+  AH_TEMPLATE([LIBCURL_FEATURE_IPV6],[Defined if libcurl supports IPv6])
+  AH_TEMPLATE([LIBCURL_FEATURE_LIBZ],[Defined if libcurl supports libz])
+  AH_TEMPLATE([LIBCURL_FEATURE_ASYNCHDNS],[Defined if libcurl supports AsynchDNS])
+  AH_TEMPLATE([LIBCURL_FEATURE_IDN],[Defined if libcurl supports IDN])
+  AH_TEMPLATE([LIBCURL_FEATURE_SSPI],[Defined if libcurl supports SSPI])
+  AH_TEMPLATE([LIBCURL_FEATURE_NTLM],[Defined if libcurl supports NTLM])
+
+  AH_TEMPLATE([LIBCURL_PROTOCOL_HTTP],[Defined if libcurl supports HTTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_HTTPS],[Defined if libcurl supports HTTPS])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FTP],[Defined if libcurl supports FTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FTPS],[Defined if libcurl supports FTPS])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_FILE],[Defined if libcurl supports FILE])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_TELNET],[Defined if libcurl supports TELNET])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_LDAP],[Defined if libcurl supports LDAP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_DICT],[Defined if libcurl supports DICT])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_TFTP],[Defined if libcurl supports TFTP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_RTSP],[Defined if libcurl supports RTSP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_POP3],[Defined if libcurl supports POP3])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_IMAP],[Defined if libcurl supports IMAP])
+  AH_TEMPLATE([LIBCURL_PROTOCOL_SMTP],[Defined if libcurl supports SMTP])
+
+  AC_ARG_WITH(libcurl,
+     AS_HELP_STRING([--with-libcurl=PREFIX],[look for the curl library in PREFIX/lib and headers in PREFIX/include]),
+     [_libcurl_with=$withval],[_libcurl_with=ifelse([$1],,[yes],[$1])])
+
+  if test "$_libcurl_with" != "no" ; then
+
+     AC_PROG_AWK
+
+     _libcurl_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'"
+
+     _libcurl_try_link=yes
+
+     if test -d "$_libcurl_with" ; then
+        LIBCURL_CPPFLAGS="-I$withval/include"
+        _libcurl_ldflags="-L$withval/lib"
+        AC_PATH_PROG([_libcurl_config],[curl-config],[],
+                     ["$withval/bin"])
+     else
+        AC_PATH_PROG([_libcurl_config],[curl-config],[],[$PATH])
+     fi
+
+     if test x$_libcurl_config != "x" ; then
+        AC_CACHE_CHECK([for the version of libcurl],
+           [libcurl_cv_lib_curl_version],
+           [libcurl_cv_lib_curl_version=`$_libcurl_config --version | $AWK '{print $[]2}'`])
+
+        _libcurl_version=`echo $libcurl_cv_lib_curl_version | $_libcurl_version_parse`
+        _libcurl_wanted=`echo ifelse([$2],,[0],[$2]) | $_libcurl_version_parse`
+
+        if test $_libcurl_wanted -gt 0 ; then
+           AC_CACHE_CHECK([for libcurl >= version $2],
+              [libcurl_cv_lib_version_ok],
+              [
+              if test $_libcurl_version -ge $_libcurl_wanted ; then
+                 libcurl_cv_lib_version_ok=yes
+              else
+                 libcurl_cv_lib_version_ok=no
+              fi
+              ])
+        fi
+
+        if test $_libcurl_wanted -eq 0 || test x$libcurl_cv_lib_version_ok = xyes ; then
+           if test x"$LIBCURL_CPPFLAGS" = "x" ; then
+              LIBCURL_CPPFLAGS=`$_libcurl_config --cflags`
+           fi
+           if test x"$LIBCURL" = "x" ; then
+              LIBCURL=`$_libcurl_config --libs`
+
+              # This is so silly, but Apple actually has a bug in their
+              # curl-config script.  Fixed in Tiger, but there are still
+              # lots of Panther installs around.
+              case "${host}" in
+                 powerpc-apple-darwin7*)
+                    LIBCURL=`echo $LIBCURL | sed -e 's|-arch i386||g'`
+                 ;;
+              esac
+           fi
+
+           # All curl-config scripts support --feature
+           _libcurl_features=`$_libcurl_config --feature`
+
+           # Is it modern enough to have --protocols? (7.12.4)
+           if test $_libcurl_version -ge 461828 ; then
+              _libcurl_protocols=`$_libcurl_config --protocols`
+           fi
+        else
+           _libcurl_try_link=no
+        fi
+
+        unset _libcurl_wanted
+     fi
+
+     if test $_libcurl_try_link = yes ; then
+
+        # we didn't find curl-config, so let's see if the user-supplied
+        # link line (or failing that, "-lcurl") is enough.
+        LIBCURL=${LIBCURL-"$_libcurl_ldflags -lcurl"}
+
+        AC_CACHE_CHECK([whether libcurl is usable],
+           [libcurl_cv_lib_curl_usable],
+           [
+           _libcurl_save_cppflags=$CPPFLAGS
+           CPPFLAGS="$LIBCURL_CPPFLAGS $CPPFLAGS"
+           _libcurl_save_libs=$LIBS
+           LIBS="$LIBCURL $LIBS"
+
+           AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <curl/curl.h>]],[[
+/* Try and use a few common options to force a failure if we are
+   missing symbols or can't link. */
+int x;
+curl_easy_setopt(NULL,CURLOPT_URL,NULL);
+x=CURL_ERROR_SIZE;
+x=CURLOPT_WRITEFUNCTION;
+x=CURLOPT_WRITEDATA;
+x=CURLOPT_ERRORBUFFER;
+x=CURLOPT_STDERR;
+x=CURLOPT_VERBOSE;
+if (x) {;}
+]])],libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no)
+
+           CPPFLAGS=$_libcurl_save_cppflags
+           LIBS=$_libcurl_save_libs
+           unset _libcurl_save_cppflags
+           unset _libcurl_save_libs
+           ])
+
+        if test $libcurl_cv_lib_curl_usable = yes ; then
+
+           # Does curl_free() exist in this version of libcurl?
+           # If not, fake it with free()
+
+           _libcurl_save_cppflags=$CPPFLAGS
+           CPPFLAGS="$CPPFLAGS $LIBCURL_CPPFLAGS"
+           _libcurl_save_libs=$LIBS
+           LIBS="$LIBS $LIBCURL"
+
+           AC_CHECK_FUNC(curl_free,,
+              AC_DEFINE(curl_free,free,
+                [Define curl_free() as free() if our version of curl lacks curl_free.]))
+
+           CPPFLAGS=$_libcurl_save_cppflags
+           LIBS=$_libcurl_save_libs
+           unset _libcurl_save_cppflags
+           unset _libcurl_save_libs
+
+           AC_DEFINE(HAVE_LIBCURL,1,
+             [Define to 1 if you have a functional curl library.])
+           AC_SUBST(LIBCURL_CPPFLAGS)
+           AC_SUBST(LIBCURL)
+
+           for _libcurl_feature in $_libcurl_features ; do
+              AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_feature_$_libcurl_feature),[1])
+              eval AS_TR_SH(libcurl_feature_$_libcurl_feature)=yes
+           done
+
+           if test "x$_libcurl_protocols" = "x" ; then
+
+              # We don't have --protocols, so just assume that all
+              # protocols are available
+              _libcurl_protocols="HTTP FTP FILE TELNET LDAP DICT TFTP"
+
+              if test x$libcurl_feature_SSL = xyes ; then
+                 _libcurl_protocols="$_libcurl_protocols HTTPS"
+
+                 # FTPS wasn't standards-compliant until version
+                 # 7.11.0 (0x070b00 == 461568)
+                 if test $_libcurl_version -ge 461568; then
+                    _libcurl_protocols="$_libcurl_protocols FTPS"
+                 fi
+              fi
+
+              # RTSP, IMAP, POP3 and SMTP were added in
+              # 7.20.0 (0x071400 == 463872)
+              if test $_libcurl_version -ge 463872; then
+                 _libcurl_protocols="$_libcurl_protocols RTSP IMAP POP3 SMTP"
+              fi
+           fi
+
+           for _libcurl_protocol in $_libcurl_protocols ; do
+              AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_protocol_$_libcurl_protocol),[1])
+              eval AS_TR_SH(libcurl_protocol_$_libcurl_protocol)=yes
+           done
+        else
+           unset LIBCURL
+           unset LIBCURL_CPPFLAGS
+        fi
+     fi
+
+     unset _libcurl_try_link
+     unset _libcurl_version_parse
+     unset _libcurl_config
+     unset _libcurl_feature
+     unset _libcurl_features
+     unset _libcurl_protocol
+     unset _libcurl_protocols
+     unset _libcurl_version
+     unset _libcurl_ldflags
+  fi
+
+  if test x$_libcurl_with = xno || test x$libcurl_cv_lib_curl_usable != xyes ; then
+     # This is the IF-NO path
+     ifelse([$4],,:,[$4])
+  else
+     # This is the IF-YES path
+     ifelse([$3],,:,[$3])
+  fi
+
+  unset _libcurl_with
+])dnl
diff --git a/m4/np_mysqlclient.m4 b/m4/np_mysqlclient.m4
index c2a4d2a..5099a02 100644
--- a/m4/np_mysqlclient.m4
+++ b/m4/np_mysqlclient.m4
@@ -53,18 +53,34 @@ AC_DEFUN([np_mysqlclient],
       _savedcppflags="$CPPFLAGS"
       CPPFLAGS="$CPPFLAGS $np_mysql_include"
 
-      dnl Putting $np_mysql_libs as other libraries ensures that all mysql dependencies are linked in
-      dnl Although -lmysqlclient is duplicated, it is not a problem
-      AC_CHECK_LIB([mysqlclient], [mysql_init], [
-        with_mysql=$np_mysql_config
-        AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mysqlclient is found and can compile]) 
-        ], [with_mysql=no], [$np_mysql_libs])
+      np_check_lib_mysqlclient
+
       CPPFLAGS=$_savedcppflags
 
     fi
   fi
 ])
 
+dnl Test mysql_init using mysqlclient
+AC_DEFUN([np_check_lib_mysqlclient],
+[
+  dnl Putting $np_mysql_libs as other libraries ensures that all mysql dependencies are linked in
+  dnl Although -lmysqlclient is duplicated, it is not a problem
+  AC_CHECK_LIB([mysqlclient], [mysql_init], [
+    with_mysql=$np_mysql_config
+    AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mysqlclient is found and can compile])
+    ], [np_check_lib_mariadbclient], [$np_mysql_libs])
+])
+
+dnl Test mysql_init using mariadbclient
+AC_DEFUN([np_check_lib_mariadbclient],
+[
+  AC_CHECK_LIB([mariadbclient], [mysql_init], [
+    with_mysql=$np_mysql_config
+    AC_DEFINE(HAVE_MYSQLCLIENT, 1, [Defined if mariadbclient is found and can compile])
+    ], [with_mysql=no], [$np_mysql_libs])
+])
+
 dnl Will take $1, find last occurrance of -LDIR and add DIR to LD_RUN_PATH
 AC_DEFUN([np_add_to_runpath], 
 [
diff --git a/m4/uriparser.m4 b/m4/uriparser.m4
new file mode 100644
index 0000000..dbb8a55
--- /dev/null
+++ b/m4/uriparser.m4
@@ -0,0 +1,140 @@
+# (this check is rougly based on and inspired libcurl.m4)
+# URIPARSER_CHECK ([DEFAULT-ACTION], [MINIMUM-VERSION],
+#                       [ACTION-IF-YES], [ACTION-IF-NO])
+# Checks for uriparser library.  DEFAULT-ACTION is the string yes or no to
+# specify whether to default to --with-uriparser or --without-liburiparser.
+# If not supplied, DEFAULT-ACTION is yes.  MINIMUM-VERSION is the
+# minimum version of uriparser to accept.  Pass the version as a regular
+# version number like 0.8.5. If not supplied, any version is
+# accepted.  ACTION-IF-YES is a list of shell commands to run if
+# uriparser was successfully found and passed the various tests.
+# ACTION-IF-NO is a list of shell commands that are run otherwise.
+# Note that using --without-uriparser does run ACTION-IF-NO.
+#
+# This macro #defines HAVE_URIPARSER if a working uriparser setup is
+# found, and sets @URIPARSER@ and @URIPARSER_CPPFLAGS@ to the necessary
+# values.
+#
+# Users may override the detected values by doing something like:
+# URIPARSER="-luriparser" URIPARSER_CPPFLAGS="-I/usr/myinclude" ./configure
+#
+
+AC_DEFUN([URIPARSER_CHECK],
+[
+  AC_ARG_WITH(uriparser,
+     AS_HELP_STRING([--with-uriparser=PREFIX],[look for the uriparser library in PREFIX/lib and headers in PREFIX/include]),
+     [_uriparser_with=$withval],[_uriparser_with=ifelse([$1],,[yes],[$1])])
+
+  if test "$_uriparser_with" != "no" ; then
+
+     _uriparser_try_link=yes
+
+     AC_CHECK_PROG(PKGCONFIG,pkg-config,pkg-config,no)
+
+     if test "x$URIPARSER" != "x" || test "x$URIPARSER_CPPFLAGS" != "x"; then
+        :
+     elif test -d "$_uriparser_with" ; then
+        URIPARSER_CPPFLAGS="-I$withval/include"
+        _uriparser_ldflags="-L$withval/lib"
+
+     elif test x$PKGCONFIG != xno; then
+
+        AC_CACHE_CHECK([for the version of uriparser],
+           [uriparser_cv_uriparser_version],
+           [uriparser_cv_uriparser_version=`$PKGCONFIG liburiparser --modversion`])
+
+        AC_PROG_AWK
+
+        _uriparser_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'"
+
+        _uriparser_version=`echo $uriparser_cv_uriparser_version | $_uriparser_version_parse`
+        _uriparser_wanted=`echo ifelse([$2],,[0],[$2]) | $_uriparser_version_parse`
+
+        if test $_uriparser_wanted -gt 0 ; then
+           AC_CACHE_CHECK([for uriparser >= version $2],
+              [uriparser_cv_lib_version_ok],
+              [
+              if test $_uriparser_version -ge $_uriparser_wanted ; then
+                 uriparser_cv_lib_version_ok=yes
+              else
+                 uriparser_cv_lib_version_ok=no
+              fi
+              ])
+        fi
+
+        if test $_uriparser_wanted -eq 0 || test x$uriparser_cv_lib_version_ok = xyes ; then
+           if test x"$URIPARSER_CPPFLAGS" = "x" ; then
+              URIPARSER_CPPFLAGS=`$PKGCONFIG liburiparser --cflags`
+           fi
+           if test x"$URIPARSER" = "x" ; then
+              URIPARSER=`$PKGCONFIG liburiparser --libs`
+           fi
+        else
+           _uriparser_try_link=no
+        fi
+
+        unset _uriparser_wanted
+     else
+        dnl no pkg-config, ok, do our best and set some defaults
+        URIPARSER_CPPFLAGS="-I/usr/include"
+        URIPARSER="-luriparser -L/usr/lib -L/usr/lib64 -L/usr/lib/x86_64-linux-gnu -L/usr/lib/i686-linux-gnu"
+     fi
+
+     if test $_uriparser_try_link = yes ; then
+
+        # let's see if the user-supplied
+        # link line (or failing that, "-luriparser") is enough.
+        URIPARSER=${URIPARSER-"$_uriparser_ldflags -luriparser"}
+
+        AC_CACHE_CHECK([whether uriparser is usable],
+           [uriparser_cv_lib_uriparser_usable],
+           [
+           _liburiparser_save_cppflags=$CPPFLAGS
+           CPPFLAGS="$URIPARSER_CPPFLAGS $CPPFLAGS"
+           _liburiparser_save_libs=$LIBS
+           LIBS="$URIPARSER $LIBS"
+
+           AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <uriparser/Uri.h>]],[[
+/* Try and use a few common options to force a failure if we are
+   missing symbols or cannot link. */
+UriParserStateA state;
+UriUriA uri;
+state.uri = &uri;
+char *location = "http://test.dom/dir/file.ext";
+int x = uriParseUriA (&state, location);
+if (x == URI_SUCCESS) {;}
+]])],uriparser_cv_lib_uriparser_usable=yes,uriparser_cv_lib_uriparser_usable=no)
+
+           CPPFLAGS=$_liburiparser_save_cppflags
+           LIBS=$_liburiparser_save_libs
+           unset _liburiparser_save_cppflags
+           unset _liburiparser_save_libs
+           ])
+
+        if test $uriparser_cv_lib_uriparser_usable = yes ; then
+           AC_DEFINE(HAVE_URIPARSER,1,
+             [Define to 1 if you have a functional uriparser library.])
+           AC_SUBST(URIPARSER_CPPFLAGS)
+           AC_SUBST(URIPARSER)
+        else
+           unset URIPARSER
+           unset URIPARSER_CPPFLAGS
+        fi
+     fi
+
+     unset _uriparser_try_link
+     unset _uriparser_version_parse
+     unset _uriparser_version
+     unset _uriparser_ldflags
+  fi
+
+  if test x$_uriparser_with = xno || test x$uriparser_cv_lib_uriparser_usable != xyes ; then
+     # This is the IF-NO path
+     ifelse([$4],,:,[$4])
+  else
+     # This is the IF-YES path
+     ifelse([$3],,:,[$3])
+  fi
+
+  unset _uriparser_with
+])dnl