Documentation: Denote command lines with "$"

Add a prompt sign to all command lines in code blocks.

10 files changed, 46 insertions, 46 deletions

diff --git a/web/input/doc/extra-opts.md b/web/input/doc/extra-opts.md
index 91a205b..06fc5b7 100644
--- a/web/input/doc/extra-opts.md
+++ b/web/input/doc/extra-opts.md
@@ -21,22 +21,22 @@ Some examples:
 
 * Read `special_opts` section of default config file:
 
-        ./check_stuff --extra-opts=special_opts
+        $ ./check_stuff --extra-opts=special_opts
 
 * Read `special_opts` section of `/etc/myconfig.ini`:
 
-        ./check_stuff --extra-opts=special_opts@/etc/myconfig.ini
+        $ ./check_stuff --extra-opts=special_opts@/etc/myconfig.ini
 
 * Read `check_stuff` section of `/etc/myconfig.ini`:
 
-        ./check_stuff --extra-opts=@/etc/myconfig.ini
+        $ ./check_stuff --extra-opts=@/etc/myconfig.ini
 
 * Read `check_stuff` section of default config file and use additional
   arguments along with the other specified arguments (*extra-opts* arguments
   are always processed first no matter where `--extra-opts` appears on the
   command line):
 
-        ./check_stuff --extra-opts -jk --some-other-opt
+        $ ./check_stuff --extra-opts -jk --some-other-opt
 
 The default nagios plugins file is used if no explicit filename is given.  The
 current standard locations checked are:
diff --git a/web/input/doc/faq/build-perl-module.md b/web/input/doc/faq/build-perl-module.md
index 0ec97ac..8c6f2ac 100644
--- a/web/input/doc/faq/build-perl-module.md
+++ b/web/input/doc/faq/build-perl-module.md
@@ -6,7 +6,7 @@ parent: FAQ
 
 This is currently an optional setting at configure time.  You need to run:
 
-    ./configure --enable-perl-modules
+    $ ./configure --enable-perl-modules
 
 Then, `make`, `make` `install`, `make` `test`, and `make` `clean` will include
 the Perl modules that are in the `perlmods/` directory as expected.  They are
diff --git a/web/input/doc/faq/compilation.md b/web/input/doc/faq/compilation.md
index b58566a..ac5fff7 100644
--- a/web/input/doc/faq/compilation.md
+++ b/web/input/doc/faq/compilation.md
@@ -6,10 +6,10 @@ parent: FAQ
 
 To compile version `1.x` of the plugins, you run:
 
-    gzip -dc nagios-plugins-1.x.tar.gz | tar -xf -
-    cd nagios-plugins-1.x
-    ./configure
-    make
+    $ gzip -dc nagios-plugins-1.x.tar.gz | tar -xf -
+    $ cd nagios-plugins-1.x
+    $ ./configure
+    $ make
 
 You can then [install the plugins][installation].
 
diff --git a/web/input/doc/faq/git.md b/web/input/doc/faq/git.md
index 5503166..390b87a 100644
--- a/web/input/doc/faq/git.md
+++ b/web/input/doc/faq/git.md
@@ -43,12 +43,12 @@ repository, and until you want to distribute your change or merge changes from
 someone else, everything that follows can happen offline.  If you have push
 access to the Nagios Plugins repository, run the command:
 
-    git clone git@github.com:nagios-plugins/nagios-plugins.git
+    $ git clone git@github.com:nagios-plugins/nagios-plugins.git
 
 If you just want a local copy or wish to clone it to your workstation, you can
 run this command instead:
 
-    git clone git://github.com/nagios-plugins/nagios-plugins.git
+    $ git clone git://github.com/nagios-plugins/nagios-plugins.git
 
 This will create a directory called `nagios-plugins` with all the `master`
 code and history (this is roughly equivalent to CVS/SVN `HEAD`).  Change
@@ -58,7 +58,7 @@ directory to `nagios-plugins`.
 
 You can edit the files in the working area.  To check the status, use:
 
-    git status
+    $ git status
 
 This will show a list of changes in the working directory.  Newly made changes
 appear in red, while changes added to the index are shown in green.  You can
@@ -74,7 +74,7 @@ will add the changes to the index.  You can select only partial diffs with
 difference between HEAD and the index) with **git diff --staged**, and then
 commit them with:
 
-    git commit
+    $ git commit
 
 Add a comment (you *have* read the [Development Guidelines][guidelines],
 right?  :-)).  This commit will be local (affecting only your own repository),
@@ -83,7 +83,7 @@ you (in the latter case you will most likely still push to a publicly
 accessible clone of your local repository).  If the change is from a
 contributor, set the author at commit time:
 
-    git commit --author="Jane Doe <jane@example.com>"
+    $ git commit --author="Jane Doe <jane@example.com>"
 
 If you realize that you forgot something in your commit and haven’t pushed it
 yet to a remote repository, you can amend your last commit with **git commit
@@ -97,18 +97,18 @@ You can revert local modifications with the following steps.  First, if you
 have already staged the changes you will have to unstage them.  As indicated
 in the **git status** message you can do so with the following command:
 
-    git reset HEAD <file>
+    $ git reset HEAD <file>
 
 Then you can revert unstaged changes with:
 
-    git checkout <file>
+    $ git checkout <file>
 
 If you have already committed changes locally and need to undo your commit(s),
 you can use **git reset**.  First find the commit names with **git log** and
 then do either one of these: To keep local modifications (you can commit them
 again, stash them, etc.)
 
-    git reset --soft <commit>
+    $ git reset --soft <commit>
 
 Note that for the purpose of “re-doing” the last commit, **git commit
 --amend** will be much easier than a reset/commit with the same end result.
@@ -116,7 +116,7 @@ To discard local modifications (if you lose important changes with this
 command you may be able to recover them with **git reflog** and **git checkout
 <commit\>**):
 
-    git reset --hard <file>
+    $ git reset --hard <file>
 
 Do not reset changes that have already been pushed to remote repositories as
 this will cause non-linear updates.  If you do so, all developers using those
@@ -131,14 +131,14 @@ If you do, either commit them or put them aside (hint: **git stash**).  If you
 cloned from the main Git repository, this command will do a fetch and then
 merge any new changes:
 
-    git pull
+    $ git pull
 
 You can also merge changes from any other fork of the repository.  This
 usually happens if someone asks you to pull from his own repo for some fix or
 enhancements.  Together with **--no-commit**, you will have a chance to review
 the changes and make any relevant correction before the merge.  Example:
 
-    git pull --no-commit git://example.com/path/to/repo.git master
+    $ git pull --no-commit git://example.com/path/to/repo.git master
 
 ## Merging Back to the Main Repository
 
@@ -146,7 +146,7 @@ Once you’re done with your commits, and after pulling from the main
 repository, you can push your changes back to it.  If you cloned using the
 *push* URL, this command will push the master branch:
 
-    git push
+    $ git push
 
 It you’re trying to push something that would generate merge conflicts, the
 push will be rejected.  You will have to do a pull first, fix any conflicts
@@ -154,7 +154,7 @@ locally, and then push again.  If your commits are local (you haven’t pulled
 them from someone else or published them somewhere) you can rebase to avoid a
 merge:
 
-    git pull --rebase
+    $ git pull --rebase
 
 Like a merge, this may generate conflicts and let you fix them, but instead of
 creating a merge commit on top of the others, it will undo your commits,
diff --git a/web/input/doc/faq/gnulib.md b/web/input/doc/faq/gnulib.md
index 328dfeb..5b7299b 100644
--- a/web/input/doc/faq/gnulib.md
+++ b/web/input/doc/faq/gnulib.md
@@ -8,27 +8,27 @@ parent: FAQ
 not available on all (Unix-like) operating systems.  In order to sync with the
 latest Gnulib code, do something like:
 
-    git clone git://git.savannah.gnu.org/gnulib.git
-    cd gnulib
-    GNULIB_HEAD=$(git rev-parse --short HEAD)
-    cd ..
-    git clone git@github.com:nagios-plugins/nagios-plugins.git
-    cd nagios-plugins
-    ../gnulib/gnulib-tool --update
-    find gl -name '*~' -o -name '.gitignore' | xargs rm
-    git status
-    git add gl
-    git commit -m "Sync with latest Gnulib code ($GNULIB_HEAD)"
+    $ git clone git://git.savannah.gnu.org/gnulib.git
+    $ cd gnulib
+    $ GNULIB_HEAD=$(git rev-parse --short HEAD)
+    $ cd ..
+    $ git clone git@github.com:nagios-plugins/nagios-plugins.git
+    $ cd nagios-plugins
+    $ ../gnulib/gnulib-tool --update
+    $ find gl -name '*~' -o -name '.gitignore' | xargs rm
+    $ git status
+    $ git add gl
+    $ git commit -m "Sync with latest Gnulib code ($GNULIB_HEAD)"
 
 In order to make a given function available via Gnulib (on systems which don't
 provide that function), the [corresponding module][modules] must be imported
 using `gnulib-tool`, e.g. (in order to add the `strcase` module):
 
-    ../gnulib/gnulib-tool --no-vc-files --import strcase
-    find gl -name '*~' | xargs rm
-    git status
-    git add gl
-    git commit -m 'Add Gnulib module "strcase"'
+    $ ../gnulib/gnulib-tool --no-vc-files --import strcase
+    $ find gl -name '*~' | xargs rm
+    $ git status
+    $ git add gl
+    $ git commit -m 'Add Gnulib module "strcase"'
 
 [gnulib]: http://www.gnu.org/software/gnulib/ "Gnulib"
 [modules]: http://www.gnu.org/software/gnulib/MODULES.html "Gnulib Modules"
diff --git a/web/input/doc/faq/installation.md b/web/input/doc/faq/installation.md
index f426f35..6f3694a 100644
--- a/web/input/doc/faq/installation.md
+++ b/web/input/doc/faq/installation.md
@@ -7,7 +7,7 @@ parent: FAQ
 After [compiling][compilation] the plugins, you can run the following command
 to install them:
 
-    make install
+    $ make install
 
 [compilation]: doc/faq/compilation.html "Compilation"
 
diff --git a/web/input/doc/faq/libtap.md b/web/input/doc/faq/libtap.md
index 29cd357..c592030 100644
--- a/web/input/doc/faq/libtap.md
+++ b/web/input/doc/faq/libtap.md
@@ -10,10 +10,10 @@ tests are in `lib/tests/test_*.c`.
 The latest libtap version is currently 1.01.  However, there is a bug with the
 thread implementation.  To workaround, run:
 
-    CPPFLAGS="-UHAVE_LIBPTHREAD" ./configure
-    make
-    make check
-    make install
+    $ CPPFLAGS="-UHAVE_LIBPTHREAD" ./configure
+    $ make
+    $ make check
+    $ make install
 
 Now when you run the Nagios Plugins `./configure` script, it should find the
 libtap library and compile the tests and run them when you run `make` `test`.
diff --git a/web/input/doc/faq/nagiosmib.md b/web/input/doc/faq/nagiosmib.md
index b2f34ae..13fcb9d 100644
--- a/web/input/doc/faq/nagiosmib.md
+++ b/web/input/doc/faq/nagiosmib.md
@@ -14,7 +14,7 @@ To develop, the requirements are:
 
 On Debian, you'd run:
 
-    apt-get install smistrip smitools
+    $ apt-get install smistrip smitools
 
 If you get errors like:
 
diff --git a/web/input/doc/faq/ownership.md b/web/input/doc/faq/ownership.md
index 58bc311..7fb8ca8 100644
--- a/web/input/doc/faq/ownership.md
+++ b/web/input/doc/faq/ownership.md
@@ -15,7 +15,7 @@ also installed with the install user's owner and group permissions.
 
 If you run:
 
-    make install-root
+    $ make install-root
 
 This will set permissions to root, assuming you are either root or using
 fakeroot.  If not, the setuid bit is still set, but the plugin may not work
diff --git a/web/input/doc/faq/root-plugins.md b/web/input/doc/faq/root-plugins.md
index b5db74d..43994de 100644
--- a/web/input/doc/faq/root-plugins.md
+++ b/web/input/doc/faq/root-plugins.md
@@ -15,7 +15,7 @@ message will appear:
 
 To install, run as root:
 
-    make install-root
+    $ make install-root
 
 Even if you are not root, the plugins will still be installed.  This is for
 packagers which can then alter the permissions of the plugins before